Problem in word document dispaly

Hi,
i have a report program , after executing the report i will get a WINWORD button , when i click that the output should be presented in a word document .The problem is when i tested the same program in different clients iam getting different layout.Are there any configuration setting that are to be maintained?
Thanks

Hi Vijay,
can u please give me some more details of what has to checked in the program.I execute the program SAPRDEMOWORD97INTEGRATION in both the clients but i did not observe any difference.If any thing else has to be checked ?

Similar Messages

Problems printing word documents

Hello
My friend as a powerbook and a HP printer, and is having problems printing word documents, nothing shows up in preview when you press print just a blank page pops out. You can print pictures fine from iPhoto, any ideas?
Popping over tomorrow to see if I can get it working. My friend emailed a document and I had no trouble printing it.
Paul.

Hello MaradaMMA,
Welcome to the forum.
Can't test at the moment, but, if after clicking the print
button, in the option tab, can you select "as laid out on screen",
then click Print?
Hope this works, if not, please post back
Regards,
Brian

Problem converting Word document with TOC table

Hello,
I am using MsWord 2003 and Acrobat 9 in Windows 7 Ultimate 64 bits.
I have created the manual using Word, I set Heading (s) with 3 levels deep and created TOC in Word.
It looks as designed. There are Titles, Subtitles and Subtiles (3rd level).
TOC in Word works fine. No problem.
In PDFMaker options under Bookmarks tab I set TOC 1 with 3 levels.
However, after converting the whole document into PDF, the Bookmarks look very strange.
They contain only Titles (no subtitles at all), each bookmark line ends with some number 3, 4 or 5 which I do not have idea what are they and those bollmarks point to the TOC page not to the page they should have.
What is wrong and how can I correct that?
Thanks,
jas
Added:
I have read many of posts having similiar problems and tried all the suggestions posted.
I tried:
1.
Reinstalling Adobe (removing all the related files), although I did not have any previous versions (and installations) of Acrobat in this computer.
2.
In Adobe PDFMaker uncheck 'Enable Accessibility and...' option
3.
Setting printer to Adobe PDF
4.
In Word > TOC settings I checked the 'Use hyperlinks instead of page numbers' option
Also I tried In Adobe PDFMaker not use TOC but to use 'Convert Word Headings to Bookmarks'
The result was horrible. Double bookmarks, reversed Level 1 with Level 2 positions and lots of empty bookmarks (I believe created by empty rows in pages tables).
Please note, that using the same Headings Word creates TOC without any problems!
The only plus side was that some of those bookmarks came with correct links.
Those bokkmarks were created using 'New Bookmarks from structure' option in Acrobat (after converting the document)
/jas

This is ridiculous!
I think it is time for Adobe to admit there is a problem creating bookmarks in Acrobat, regardless the used version.
Today I spent all day trying different combinations.
In addition to my post above I installed and tested the same document in Acrobat Prof ver.8 and Acrobat X.
The installation was virgin (no previous Adobe was installed).
Same for MS Office. Virgin installation of ver. 2003 and 2007
My document I copied and pasted in blank new Word document.
Also I tried under Windows XP
All that does not make any difference.
The final result was always the same, as shown graphically in above post.
Any ideas?
What I do not understand, how such big corporation allows bugs like that.
Convertning TOC (nice working in Word) cannot be a rocket science!
If Word can create TOC from Headings flawlessly, why not Adobe?
That TOC is correctly converted as TOC page in pdf document.
Maybe Adobe should add the option to create bookmarks directly from it after the conversion?!
As I said, it is not a rocket science.
Onus is on you, Adobe!
/jas

Problem importing Word document with TOC

I am trying to import a Word document containing a table of contents into Pages. The TOC does not appear at all and I get a box saying: "The table of contents is empty because none of the paragraph styles selected in the Document Inspector are used in the document". The TOC style in the original Word document is a hyperlink.
Any help appreciated,
George
Pages 2.0.2

I'm on Windows right now, but I will try answering anyhow. Forgive me for being foggy.
If the the document complains that the styles are wrong, that is probably where the problem is. Somewhere in Pages there should be a setting to choose which styles to use for building a table of contents. You should try to change those settings to match the style names used in the Word document.
A possible source of error here is if you use Pages in another language than the Word document. Let's say the Word document uses the German word "Titel" for Header 1 and you run Pages in French, which expects something like "Titre". It is then possible that Pages cannot recreate the table of context, unless you tell it that it should built it from the styles called Titel.

Font problem creating WORD document with Oracle Reports 8i/9i

I created a report using different Arial fonts. Once the report is generated from a .NET application, the fonts in the word document are changed apparently into Helvetica. This disarrange my lay-out completely. How can I solve this problem?
(NB. when I generate a PDF, there is no problem!)

By the way. I create the files in this way:
   private void createFile(String outFileName) {
      try {
         ByteArrayInputStream result = clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
         File newFile = new File(outFileName);
         FileOutputStream output = new FileOutputStream(newFile);
         int bytesRead = 0;
         byte[] byteArray = new byte[10000];
         while ((bytesRead = result.read(byteArray)) != -1) {
            output.write(byteArray, 0, bytesRead);
         output.flush();
         output.close();
      } catch (Exception e) {
         e.printStackTrace();

Having a problem saving word documents...any ideas?

I'm hoping someone can help me out with this..
Lately when I've been writing a word document a message will pop up from the Auto Recovery Save. It says, "Word cannot save or create this file. The disk may be full or write-protected. Try one of more of the following: free more memory, make sure that the disk you want to save the file on is not full, write-protected, or damaged."
I'm using Word 2004 (version 11.3.5) on Mac OS X 10.4.11
I've tried deleting some word files to free up some space but I'm still getting this message. I haven't had any other problems using my macbook. I write a lot of word documents (I'm a student) but this is the first time I've ever had this message pop up.
Any ideas what the problem is or what I can do to fix it?
Thanks!
Stacy

How much free space is on your hard drive?
Have you emptied the trash?
Disk space is not 'freed' for re-use by deleting files until the trash is emptied.
Have you tried using Disk Utility to check the disk for errors and to verify/repair disk permissions?
Have you tried saving your documents to a flash drive plugged into the USB port?
An empty 4Gb or 8Gb Flash drive has plenty of space to store lots of documents as an inexpensive and a temporary solution if you're almost out of hard disk space.
Even with a flash drive, you might get the same error message, because the temporary files are probably defaulting to being stored on your hard disk. There's likely a place somewhere in Word preferences to view and change where the temporary files are stored. (Sorry, I haven't used OS X 10.4 or Word 2004 in about 4 years, and I don't have either one immediately available to check.)
It's also possible that your hard drive is beginning to fail. If Disk Utility cannot verify the hard disk, I would recommend making a backup of important files immediately to CD or DVD. (I use Time Machine, but that didn't become available until OS X 10.5)

Problems Converting word documents with the Adobe Printer and method ,printout (OutputFileName:=) in

I would like to write a vb-procedure to convert a word document into pdf.
I'm developing in "Visual Basic 2005 express edition" and tried the following code:
code[
Private Sub PrintDocument(sDocName As String,sNewDocName As String)
'sDocname = "c:\tmp\test.doc"
'sNewDocName = "c:\test\test.pdf)
Dim m_wdApp As Word.Application = New Word.Application
Dim m_wdDatei As Word.Document
m_wdDatei = m_wdApp.Documents.Open(FileName:=sDocName)
m_wdDatei.PrintOut(Background:=False,OutputFileName:=sNewDocName, _ ActivePrinterMacGX:="Adobe PDF")
m_wdDatei.Close(False)
m_wdDatei = Nothing
m_wdApp.Quit()
m_wdApp = Nothing
End Sub
]End of code
After running the printout line I can see a little window popping up, which shows the progress in the converting and after a little time I can find the expected file in the targetdirectory.
The problem is that I can't open this file, I just get the message that the file is corrupt or not of the pdf-format.
By scanning the web, I found several threads describing the same problem, but so far I found no solution. Maybe someone here can help me.
Adobe standard 7.0.5.2005092300
COM: Microsoft Word 11.0 Object Library

You were right.
I've changed the default printer to "adobe printer" and created a new file. I thought the problem solved, but instead, the error is the same. The new file starts like this:
%!PS-Adobe-3.0
%%Title: Microsoft Word - P0017083.OPB
%%Creator: PScript5.dll Version 5.2
%%CreationDate: 3/31/2008 19:42:4
%%For: MMasshoff
%%BoundingBox: (atend)
%%Pages: (atend)
%%Orientation: Portrait
%%PageOrder: Special
%%DocumentNeededResources: (atend)
%%DocumentSuppliedResources: (atend)
%%DocumentData: Clean7Bit
%%TargetDevice: (Adobe PDF) (3016.102) 0
%%LanguageLevel: 3
%%EndComments
%%BeginDefaults
%%PageBoundingBox: 0 0 595 842
%%ViewingOrientation: 1 0 0 1
%%EndDefaults
%%BeginProlog

Problems sending Word documents

Whenever I attach word documents to my emails, the recepients do not even receive the message. And this doesn't only happen when I send them to PC users. It happens even when I check the "windows compatible" box and when I add an extension. Sometimes I have the problem with PDF files as well.
I use the Apple Mail program to send my messages.
Thank you for helping me solve this very annoying problem.
imac 20" Mac OS X (10.4.8)

When sending attachments to Windows users, the file extension must be included with the file name and the only purpose the Send Windows Friendly selection is designed for is removing the Apple resource fork from attached files which are invisible to fellow Mac users.
A successfully sent message (a message will remain in the Outbox mailbox and not be moved to the account's Sent mailbox if the message cannot be sent for whatever reason) is either accepted or rejected by the recipient's incoming mail server. Received messages rejected by the recipient's incoming mail server usually include a return email error message sent to the sender indicating why the message was not accepted but not always which depends on the recipient's email account provider and incoming mail server.
For successfully sent messages not received by the recipient, you need to contact the email account provider for the account being used to send these messages or if you are using an SMTP server to send messages with this account that is not provided by the email account provider for the account, you need to contact the provider for the SMTP server used.
Have the long message headers available for these sent messages in case it is requested and the recipient needs to contact their email account provider for the account you are trying to send the messages to that are not being received. Your email address or the domain for your email account or a range of IP addressed may be blocked by the recipient's incoming mail server but none of these problems are caused by Mail if these messages were successfully sent which is indicated by the messages being available in the account's Sent mailbox.

Problem in word document creation

Dear All,
I am creating document by using the interface.
I can see the document is getting created and opened, but immediately it is getting closed
I want this document to be open until i close. How can i suceed.
Here is my code below
    CALL METHOD c_oi_container_control_creator=>get_container_control
      IMPORTING
        control = gi_cont_control.
* Initialiaze container control Mandatory
    CALL METHOD gi_cont_control->init_control
      EXPORTING
        inplace_enabled          = ' '
        inplace_scroll_documents = 'X'
        no_flush                 = 'X'
        r3_application_name      = 'TEST'
        register_on_close_event = 'X'
        register_on_custom_event = 'X'
        parent                   = gcl_custom_container
        name                     = 'TESTING'
        autoalign                = 'X'
      EXCEPTIONS
        javabeannotsupported     = 1
        OTHERS                   = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
* Get the reference of the document proxy
    CALL METHOD gi_cont_control->get_document_proxy
      EXPORTING
        document_type = 'Word.Document.8'
      IMPORTING
        document_proxy = gi_document
        error          = gi_error.
    CREATE OBJECT gcl_event_doc.
    SET HANDLER gcl_event_doc->on_close_doc FOR gi_document.
    CALL METHOD gi_document->create_document.
Regards,
Lisa

Solved it by own.
Just call method in PAI this will solve the problem

Problems converting Word documents to PDF

I am having trouble converting Word documents to PDF files. Whenever I try to convert the file, I receive the following error message: Missing PDFMaker files. Do you want to run the installer in repair mode? When I run the installer in repair mode, I still receive the same message. I have Adobe Acobat Professional 8 and MS Office 2007 installed on my PC.

Cannot delete or repair Adobe Acrobat Professional 6.0, nor access original disk since "accidently" using a registry repair program. I have used system restore to no avail.
The following scenarios occur when trying to "change/remove" Adobe program/updates:
Attempt to Uninstall:
Adobe Acrobat/Reader 6.0.6 Update
WINDOWS INSTALLER window:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing installation package Adobe Acrobat and Reader 6.0.6 Update.msi in the box below.
C:\Program Files\Adobe\{9074E407-55DC-4A4C-A591-6ADA60386EF4}\
Click Okay and appears--
ADD OR REMOVE PROGRAMS window:
The installation source for this product is not available. Verify that the source exists and that you can access it.
Attempt to Uninstall:
Adobe Acrobat/Reader 6.0.5 Update
WINDOWS INSTALLER window:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing installation package Adobe Acrobat and Reader 6.0.6 Update.msi in the box below.
C:\Program Files\Adobe\{490A4339-AFA5-4098-A374-7752A1A30308}\
Click Okay and appears--
ADD OR REMOVE PROGRAMS window:
The installation source for this product is not available. Verify that the source exists and that you can access it.
Attempt to Uninstall
Adobe Acrobat/Reader 6.0.1 Professional
ADD OR REMOVE PROGRAMS window:
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
Anyway to recover functionality to remove/change (uninstall/repair)?
I also am unable to access the original disc now. WINDOWS INSTALLER window:
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
Any help available?

Problem launching Word document

I have the following script embedded in html. If I do a local test with a html page on my machine, this works fine - it lauches word as separate application with the word document I pass in.
If I render this code within a JSP served from weblogic, it simply has no effect. I cant figure out why it wont work.
Any ideas appreciated.
Thanks.
<SCRIPT>
documents = 'file:///'+'s:/batch/test.doc'
if(documents.length>0)
var wScript = new ActiveXObject("WScript.Shell");
wScript.Run(documents);
</SCRIPT>

Your right this was a security issue on the browser. I dont think I'm going to get around using this solution as users would have to change browser settings.
I am able to open the word document through the browser using:
window1=window.open(documents);
but I need to have the actual word application open. If anyone knows of a way to do this with JS or VBS, I would appreciate it.

Problem converting Word Documents into pdf

Hi Folks - and Happy New Year to You!
I'm using version Adobe 7.0.
I written an e-book and can't get the darn thing to convert into a pdf file. Sometimes it works -- sometimes it doesn't.
I suspect the problem is with my many embedded graphics. I have created Microsoft Powerpoint slides, and have cut and pasted them into my ebook as objects inserted between the paragraphs of text.
When converting from the "Convert to Adobe PDF" button in my Word Toolbar, it gets all the way through and finally has an error at the end saying: "an error occured while creating a temporary file; Word was unable to write some of the embedded objects due to insufficient memory or disk space"
I have Adobe set with a password to protect copying, and the Word file size is around 1Mb.
My computer is only a year old, and I have 23 Gb of free space.
I'm using Windows Professional XP and Word 2002
Please reply asap or email me on [email address deleted by host]
You Have My Best Regards
Dave

Hi,
I have tried to get this right for a few days now Finally found some info at
http://kb.adobe.com/selfservice/viewContent.do?externalId=330729
See point 2 below.
Creating PDF files by using PDFMaker
You can convert Word files from within either Word or Acrobat. Because both applications use PDFMaker, you can achieve the same results in either application.
To create a PDF file from within Word:
1. Exit from all applications except Word to minimize processing time. To further minimize processing time, complete the following:
-- If the document contains several fonts, either reduce the number of fonts or replace TrueType fonts with Type 1 fonts.
-- If the document contains large or complex tables, reduce the number of columns and rows.
2. If the document contains hyperlinks, make sure that the page margins are .8 inch or larger.
3. To add features such as font embedding and compression to your PDF file, choose Adobe PDF > Change Conversion Settings. (To create customized job options settings with these features, edit the conversion settings. For more information, see "Editing the PDFMaker Conversion Settings" in the Acrobat Help.)
Isn't it totally obvious to anyone that the margins have to be at least 0.8 inches for hyperlinks to work.....
I made a new page format slightly larger and increased the margins. After making the PDF file i trimmed it in Adobe. Worked like a dream...
Roger
Roger

Help - Problem with word documents

Hi
All of a sudden I am having problems with documents in my word application. Files I have previously transderred on to my Mac from a memory stick or via email attachments are unable to be altered. i cannot add to a downloaded document that needs to be filled in or alter a date on a letter that I send out each month. I am not very compiter literate.
Beryl

Hi
All of a sudden I am having problems with documents in my word application. Files I have previously transderred on to my Mac from a memory stick or via email attachments are unable to be altered. i cannot add to a downloaded document that needs to be filled in or alter a date on a letter that I send out each month. I am not very compiter literate.
Beryl

Problem with Word document after publish

Hi,
I created a Transparent background with an image and placed
in slide 2 and make it as background, options i made it to Rest of
the Project. When i publish it in Word. I can see the transparent
background for slide 2 only, i cnt see for rest of the slides.
Looking for guidence on this.
Regards
Ranjith Kumar. Bandi

You'd have the same version of Word since the MS updates update all MS Office apps.
The only thing that I can suggest is to take your question to the MS Office 2011 Mac forums -> http://answers.microsoft.com/en-us/mac.
That's where I'm headed to complain about my font problems!
Clinton

Problem Loading Word documents in BLOB columns

Hi
I tried loading the documents in the BLOB column, then indexing and then text serach, but the query does not work or guess that the document does not get loaded
The table structure is
table: Content
feilds
id number (10) pk
author varchar2(30)
doc_name varchar2(60)
document BLOB default empty_blob()
loaded data with SQL loader and the file details are below
the load1.ctl file
LOAD DATA
INFILE 'd:\intermedia\data1.dat'
INTO TABLE contents
APPEND
FIELDS TERMINATED BY ','
(id SEQUENCE (MAX,1),
author ,
doc_name
LOBFILE (CONSTANT 'c:\nandeep\jun_news.doc') TERMINATED BY EOF)
data1.dat contents is as follows
nandeep,june news,c:\nandeep\jun_news.doc,
Any reason why it does not work or what could be the alternative
-nandeep
null

Your are in the wrong Forum. Documents cannot be loaded in iFS using SQL*LOADER

Problem in word document dispaly

Similar Messages

Maybe you are looking for