Problem in working with Video

I have problem in working with Opening and editing video
When I tried to open :
Could not complete your request , because it is not right kind of document [ for every format of video ]
When I import as video :
it creates as many layers as there are frames in the video
Please help
Thank you

Video is like Image formats, but on steroids. Also, many formats, such as AVI can have 100's of different CODEC's inside them. It is almost like having a JPEG, that contains a TGA, or a TIFF, or a PCX, or any number of what we see as other formats. It can be daunting, but let's start at the beginning.
For a discussion on formats, such as AVI, MOV, WMV, etc., see this article: http://forums.adobe.com/thread/440037?tstart=0
As CODEC's are the "building blocks" of AV files, this article is good too: http://forums.adobe.com/thread/546811?tstart=0
As you see from that first link, the format is just a "wrapper," and can contain all sorts of "stuff." That FAQ Entry will tell you how to "peek inside" the wrapper. That is what we need, as Mylenium asks. If you can let us know all about the faulting files, maybe someone can help you.
Also, PS has somewhat limited Video support, both on Decode and Encode, so, and depending on what you have, you might have to convert that/those file(s).
Good luck,
Hunt

Similar Messages

Win7-64 Photoshop CC blank Save As dialog, then crash, when working with video / frame animations

Hi, I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons.   If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.

Frustrating that this thread has petered out, since I'm having the exact same issue. Did you ever find a way to improved stability?
Also of note, the issue followed me across machines. Two weeks ago I purchased a new machine, figured if that didn't solve the problem nothing would... It didn't. :\
The only similar factors are that the machines both are 64bit Windows 7 (a fresh OEM install on the new box) and have nVidia-brand graphics cards. (Again, though - not the SAME graphics card, picked up a new one with the new machine.) No drive cloning was involved: this is completely new hardware, a fresh factory install of Windows 7, different antivirus (went from AVG to Avast), and new download of Photoshop CC from CreativeCloud.
Looks like our event details are quite similar, too.
Log Name:
Application
Source:
Application Error
Date:
4/6/2014 1:57:39 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
REDACTED
Description:
Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a9f2
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x1ca4
Faulting application start time: 0x01cf51c68639ec43
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: 5268f22b-bdbd-11e3-b9df-d850e65afc6f

Viewing or working with videos in iPhoto

I downloaded a bunch of pictures and 1 video from my Canon camera and I can't play the video in iPhoto. How do I play it and how do you work with videos?

Welcome to the Apple Discussions. When you installed Snow Leopard did you select the option to include Quicktime Player 7 in the installation? It would be in the Applications/Utilities folder. If it's not there then do a custom install of SL and select just QT Player 7.
If it's there then it could be a codec issue as Roddy has already pointed out.
OT
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Logic slow when working with video

Hi there
I'm trying to work with video in Logic 8 but it slows down pretty dramatically when I imported the video. Are there any settings I can tweak to get the action to run more smoothly. The playhead jumps very slowly around, it takes the video a few seconds to start to play after pressing play in Logic. The video file I'm using is a Quicktime Mp4, around 288 Mb in size. The details of my system are on the signature below. Any help is much appreciate it.
Thanks - Gunnar

Don't use mp4, this is most likely the cause of your problem, especially if the video codec of your file is H.264. Mp4 allows you to have better perceived video quality with a lower file size, but the tradeoff is that it makes your computer do a lot of work in real time to decode the video.. Thus the slowdown of logic.
Try converting your video file to QuickTime DV, this is a much more performance-neutral format, your video file will be much bigger but it won't be making any huge demands on your system to play back.
Also, if your movie is too long it can also cause slowdowns in your logic project. When working on feature length films, they are always divided into reels of around 25 minutes each which keeps things manageable. If your film is very long you should divide it up.

Problem in working with Japanese data

Hello,
We have an application, which should work for both English and Japanese languages. Our application is working fine for English data but in case of Japanese, we are facing problems. In the application, there is a language setting, where the user can select either English or Japanese. This changes the language of the labels to English or Japanese. We are handling this thru' ResourceBundles. But the data that is entered can be independent of this. In English setting also, the data entered or diplayed could be Japanese. Now we are facing problems at vaious places -
1. When we enter Japanese data and save it, it gets copied into the bean and if there is any error in the saving, the same data from bean comes back on the screen. This data doesn't appear properly in Japanese.
2. When we try to retrieve the already saved data from database, it doesn't show poperly in Japanese.
We are using our own 'toUnicode' function, which converts the data to Unicode before saving the data to database. Similarly, we have tried different encodings like SJIS / Shift_JIS / ISO-2022-JP at various places i.e. in 'Page' directive or in HTML Meta tag or various combinations of these two. Nothing is working reliably. Sometimes for some combination, data retained in the first case is correct but it can't be saved. Sometimes it works with Unicode, sometimes without Unicode. Some combination affects the Japanese labels as well. Otherwise the labels at least are displayed properly.
The same code with just Shift_JIS setting in 'page' directive, worked well in IIS Server for both English and Japanese.
What could be the problem in WebLogic? Does it matter if WL is installed on English or Japanese machine?
Kindly answer ASAP, since the project is getting delayed.
Thanking in anticipation...
-Medha

Hi,
is there a difference in handling Japanese and Chinese chars? If not I
might be able to give you some hints.
Daniel
-----Original Message-----
From: JSB [mailto:[email protected]]
Posted At: Monday, February 12, 2001 6:22 PM
Posted To: internationalization
Conversation: Problem in working with Japanese data
Subject: Re: Problem in working with Japanese data
Have u solved this yet, and how ?
Medha <[email protected]> wrote in message
news:[email protected]...
>
Hello,
We have an application, which should work for both English andJapanese
languages. Our application is working fine for English data but in case
of
Japanese, we are facing problems. In the application, there is a
language
setting, where the user can select either English or Japanese. This
changes
the language of the labels to English or Japanese. We are handling this
thru' ResourceBundles. But the data that is entered can be independent
of
this. In English setting also, the data entered or diplayed could be
Japanese. Now we are facing problems at vaious places -
1. When we enter Japanese data and save it, it gets copied into thebean
and if there is any error in the saving, the same data from bean comes
back
on the screen. This data doesn't appear properly in Japanese.
2. When we try to retrieve the already saved data from database, itdoesn't show poperly in Japanese.
We are using our own 'toUnicode' function, which converts the datato
Unicode before saving the data to database. Similarly, we have tried
different encodings like SJIS / Shift_JIS / ISO-2022-JP at various
places
i.e. in 'Page' directive or in HTML Meta tag or various combinations of
these two. Nothing is working reliably. Sometimes for some combination,
data
retained in the first case is correct but it can't be saved. Sometimes
it
works with Unicode, sometimes without Unicode. Some combination affects
the
Japanese labels as well. Otherwise the labels at least are displayed
properly.
The same code with just Shift_JIS setting in 'page' directive,worked
well in IIS Server for both English and Japanese.
What could be the problem in WebLogic? Does it matter if WL isinstalled on English or Japanese machine?
Kindly answer ASAP, since the project is getting delayed.
Thanking in anticipation...
-Medha

Problem when working with package???Please, help me!!!

I got 3 .java files from one Java tutorial as follow:
Server.java (in package mygame.server)
Utilities.java (in package mygame.shared)
Client.java (in package mygame.client)
All the above files are placed in "E:\Java Programmes\source"
After compiling, i got correspponding .class files:
Server.class (placed in "E:\Java Programmes\class\mygame\server")
Utilities.class (placed in "E:\Java Programmes\class\mygam\shared")
Clients.class (placed in "E:\Java Programmes\class\mygame\client")
But when i run Server.class which contains main method, i got error as follow:
E:\Java Programmes>java class\mygame\server\Server
Exception in thread "main" java.lang.NoClassDefFoundError: class\mygame\server\S
erver (wrong name: mygame/server/Server)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
That was very puzzled for me. I cannot find out what wrong with my files. Please., any boby, help me!!! I always got this problem when working with package and managing files. Thanls a lot.

java -cp "E:\Java Programmes\class" mygame.server.Server

Nexus 1000V. problem when working with the console VMWare

I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.

Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert

HT204291 i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video j

i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?

That's why, you will need to upgrade to 10.8

Problems While Working With CLOB fields

HI Friends,
I am facing one big problem while working with CLOB fields. I work in crystal reports in my project and My team is works in BMC Remedy tool. As per database configuration by default the date fields are stored in numbers. There is a field named Work Log which stores the complete history information of a ticket or a call.
While generating reports I convert the date fields from numbers into date values by using to_date function. But I am not able to change the dates mentioned in the worklog which is a CLOB field. As a result when I am generating reports text part of the work log is comming fine but the date fields are comming in numbers.
Please refer the below example:-
*1291012455anilkumarptesting*
Full Name:
PRG Name - EUC-APP PKGN1291012585anilkumarptesting
Full Name:
PRG Name - EUC-APP PKGN1291012631anilkumarptest
Full Name:
PRG Name - EUC-APP PKGN1291207510anilkumarpfd
Full Name: Anil Kumar Pantangi
PRG Name - Prod_Ops1291207535anilkumarpf
Full Name: Anil Kumar Pantangi
PRG Name - Prod_Ops
Assignment notification disabled for this transaction1291212517kapilbasd
Full Name: Anil Kumar Pantangi
PRG Name - Prod_Ops
See the first line of the worklog "1291012455anilkumarptesting", 1291012455 is referring a date value, but due to database configuration it's comming in number. All the other numbers in the above text are dates only which need's to be converted. These dates are captured in remedy tool when someone updates that ticket.
I am not able to decide how to change this numbers into dates. As it is containing lot's of numbers i am really confused how to come with a solution.
Can I expect a solution from you, atleast a way how to proceed resolving this problem. Should I have to write a procedure for this??
Please help..........
Kindly let me know if you need any more input.
Regards,
Arijit

937670 wrote:
1291012455 represents a date value,What date value does it represent? Since it's not obvious to us what date you want that converted into, it's obviously hard for us to help. For example, perhaps you want that to be Jan 29, 2010 with "12455" representing a time component in some non-obvious format. Perhaps you want that to be December 1991 at 1:24:55. Perhaps you want to convert it to a completely different date. You're going to need to tell us in words how to convert your numeric data into a date.
My question is how can I convert all the numbers into date in the CLOB field and present it in a proper manner.Given your sample data, what do you expect the output to be? Do you expect many rows of data, one for every date in the CLOB? Do you expect a comma-separated list? Something else?
Justin

My iPod Video won't work with videos!

my ipod video (that i got for christmas) won't work with videos, tv shows, etc. with movies, it says it is loading for about 10 seconds and then it goes back to the menu. same with tv shows, but is completely black screen. help! i don't know what is going on and i really need my ipod to play videos.
Windows XP

Just want to thank you for this brilliant solution. It worked!! I also want you to know that I actually went into the apple store today, and none of the clerks had any idea how to fix this. That excludes the ''genius bar'' which had a five hour wait for appointments! Thank you so much again, merrymusic

Anyone recommend a good tutorial for 'working with video' in Logic?

I've worked with video a fair amount, but only ever skimmed the surface and found odd workarounds to get things to happen how I want them.
The manual is scant when it comes to features such as SMPTE locking and beat mapping scenes to bar lengths and all sorts of other tricks I'm probably unaware of.
The only Macprovideo I can find is from 2005 and whilst I'm sure has some common features, is perhaps not up to date enough. And this http://www.soundonsound.com/sos/jul07/articles/logictech_0707.htm is ok for a quick overview but I'd like to see some of it in action (or at least have more detailed exercises).
Does anyone know any tutorials they'd recommend? Cheers

canon pixma 6200 series works

Photoshop CC: program error occures when working with videos

Whenever I'm trying to trim a video in Photoshop CC I'm running into this error:
"Could not complete your request because of a program error"
I can't close it by clicking "okay", so I have to close photoshop via task manager.
- I also came across this error when I was trying to duplicate a text layer while working with a video.
- When I was using Photoshop CS6 several months ago trimming videos worked fine.
- I've tested if the problem appears on my laptop (Win7, i5, on board intel hd graphics) in Photoshop CC, and it does not!
- I've deinstalled all Adobe Products (and their plugins) and ran Adobe Creative Cloud Cleaner without any errors, then reinstalled Photoshop CC.
- I restored my preferences.
- My graphic board drivers are up to date.
- My computer is a Windows 7 (64 bit) Home Premium, Intel Core i7-2600 CPU @ 3.40 GHz, 16 GB RAM with a NVIDIA GeForce GT 520 graphic board.
I honestly don't know what's the matter. Unfortunately I couldn't find any other thread with the same problem.
Hope you'll be able to help
Thanks in advance!

OK. I suspect you might have run into one of the Mavericks bugs then. I would certainly expect your system to handle 720 without complaining.
Apparently Adobe have made Apple aware of these bugs, and have no more control over rectifying them.
Try Google with 'Photoshop cc video Mavericks'
http://forums.adobe.com/message/5826052
I am not aware of any workarounds, but I use a PC and use PremPro for video anyway, but that's not to say there isn't one. If this thread doesn't bring you an answer, start a new one with a subject line something like:
Video Editing Problems with CC and Mavericks

Airport Extreme working with video chat

Has anyone else had any problems doing iChat's video chat through an Airport Extreme? I used to be able to video chat fine through my wired LAN, but when I set up the Airport Extreme connected to the wired LAN, it will allow me to connect through a video chat but it only shows my camera view, no sound or picture from my buddy, and iChat thinks it's doing a video chat just fine. Anyone else had this problem? Are there ports I need to fix?

I take it you are connecting to the internet via a router of some kind. You have then attached the Airport to the router to gain wireless internet access. If this is the case you need to make sure you have the Airport Extreme configured as a bridge otherwise you have a situation known as double NAT. NAT is a method used to share a single connection with multiple computers and works as a rudimentary firewall. iChat AV has a hard enough time dealing with a single NAT but if you have NAT on your AIrport and your router it is going to fail.

Problem when working with multiple sequences

Dears,
In order to make life easier (I am currently working on a rather long project), I work with multiple sequences, one per chapter.
My problem: I named one sequence "assembly sequences" in order to add the various sequences. I dropped the sequence no 1, then no 2. All works fine, beside that when playing the sequence no 2, I see two black lines on top and bottom of the screen for the all length of the sequence. Which is not the case when I click on the sequence itself and play it independently.
Any idea how to solve this ?
Thanks
Nic

Thanks, what happened is that :
1st sequence is like this : Frame size 720x576 pixels, video rate 25fps, Compressor DV-Pal. And I think it is the one appropriate for me and my country.
2nd sequence is like this : Frame size 720x480 pixels,
video rate 29.97 fps, Compressor DV-DVPRO-NTSC.
I think I should change the second sequence setting, but can I do it after all the work I have done, and continue making a 3rd, 4th and so on ?
Tx for your precious help,
Nicolas

Working with video files on compatible external drive with imovie09

I have run out of room on my MacBook Pro hard drive, so I have moved all of my video files onto a compatible external hard drive. How do I work with these file in imovie09, do I need to import the files back onto the computer or can I work with them from the external hard drive, if so how. Also, is it possible to after completing editing to save just the project on the computer rather than the hard drive or will that cause a "source video" issue.
Ultimately, I would like to have all of the source video saved on the external hard drive and the projects saved on the computer
I had no problems working and saving the files when just using the computer, the external hard drive has complicated things for me. Thanks.

John Pichola wrote:
I have run out of room on my MacBook Pro hard drive, so I have moved all of my video files onto a compatible external hard drive. How do I work with these file in imovie09, do I need to import the files back onto the computer or can I work with them from the external hard drive, if so how. Also, is it possible to after completing editing to save just the project on the computer rather than the hard drive or will that cause a "source video" issue.
How did you move all of your video files? The best way in iMovie '09 is to do it in the Event Library. Make sure you're viewing hard drives (click the disk icon at the upper-right corner of the list of events). Then drag the events you want from your internal hard disk to the external one. That way iMovie keeps track of where the source files are located.
You can do the same with project files in the Project Library, too.
If you've already moved the files in the Finder, to do it cleanly, I'd recommend moving them back to the iMovie Projects and iMovie Events folders in your Movies folder. Then launch iMovie and move them as explained above.
Or, make sure the iMovie Projects and iMovie Events folders are at the top level of your external hard drive. When you launch iMovie, it looks in those places for footage and projects, and will make them available.

Problem in working with Video

Similar Messages

Maybe you are looking for