Problem Installing Service Pack 4

Have I done something stupid?
I followed the seemingly simple steps documented in the readme file. I
copied the weblogic510sp4.jar and weblogic510sp4boot.jar files into my
weblogic/lib directory. I then updated the JavaClasspath and
WebLogicClassPath in my batch file (I launch WebLogic from a batch file).
Everything seems to work fine.
However, when I run java weblogic.Admin t3://localhost:80 VERSION
I get:
WebLogic Build: 5.1.0 04/03/2000 17:13:23 #66825
The documentation says I should get:
WebLogic Build: 5.1.0 Service Pack 4 ...
It appears that the service pack is not installed. Have I don't anything
wrong? When I start the server, I see the appropriate classpaths in the
log - so I know that the path update is being seen.
I have attached a copy of my startWebLogic batch file. Thanks in advance
for any help.
-Dave Ortman
[startWebLogic.cmd]

Thanks!
I had missed that small detail. I think that 10 second post saved me quite
a few headaches.
Thanks for the quick reply,
-Dave Ortman
"Jesse E Tilly" <[email protected]> wrote in message
news:399cbc7e$[email protected]..
The service pack jars need to be first in their respective classpaths.
Jesse
"Dave Ortman" <[email protected]> wrote in message
news:[email protected]..
Have I done something stupid?
I followed the seemingly simple steps documented in the readme file. I
copied the weblogic510sp4.jar and weblogic510sp4boot.jar files into my
weblogic/lib directory. I then updated the JavaClasspath and
WebLogicClassPath in my batch file (I launch WebLogic from a batch
file).
Everything seems to work fine.
However, when I run java weblogic.Admin t3://localhost:80 VERSION
I get:
WebLogic Build: 5.1.0 04/03/2000 17:13:23 #66825
The documentation says I should get:
WebLogic Build: 5.1.0 Service Pack 4 ...
It appears that the service pack is not installed. Have I don'tanything
wrong? When I start the server, I see the appropriate classpaths in the
log - so I know that the path update is being seen.
I have attached a copy of my startWebLogic batch file. Thanks inadvance
for any help.
-Dave Ortman

Similar Messages

Problem installing service pack 3 update

I have windows XP up and running on a seperate drive in my Mac Pro. I am now trying to update Windows by installing service pack 3 update via the Windows Update option in the control panel.
I get an error everytime saying there is not enough disk space. My hard drive have 109GB of free space so I don't know what the problem is.
Any ideas?

jperkinski:
Here is a solution for you that should work:
Boot into Windows XP and get to the desktop.
Click on the START Button
Click on RUN
Type Regedit in the windows and click on OK
*Navigate to*
HKEYLOCALMACHINE\Software\Microsoft\Windows\CurrentVersion\Setup
HKEYLOCALMACHINE
\Software
\Microsoft
\Windows
\CurrentVersion
\Setup
In the right pane, Right-click and select New - String value
Name it as “BootDir” and set its value to “C:\”
Try installing SP3 now and it should work.
Axel F.

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Install service pack 2 in sharepoint medium form

Hi
i have a sharepoint medium form in production environment and i want to apply service pack 2
form has :
2 Application servers
2 Web front end servers
2 Index servers
1 Database server
Servers
Operating System
Configuration Database version
Services Running (check the attached file for details services running in all server)
1 Application Server
Windows server 2008 R2 Enterprise , Service pack 1
14.0.6029.1000
Central administration Service running in this server Only
For other services check the attached file
2<sup>nd</sup> Application Server
Windows server 2008 R2 Enterprise , Service pack 1
In two Web front end servers
Windows server 2008 R2 Enterprise , Service pack 1
Web applications deployed in these servers (these are load balanced servers)
Microsoft SharePoint Foundation Web Application running
Search service is running in these server
In two Index servers
Windows server 2008 R2 Enterprise , Service pack 1
Search service is running in these server
Database server
Windows server 2010 Data center
I want to take advise for from which server I will start install service pack 2
Or before applying service pack 2, Is I need to upgrade operating system if I update can I face any problems ?
adil

           Leaving function Command.this[string key]
03/27/2014 00:13:12 14 INF                    Leaving function Farm.TryIsJoinedToFarm
03/27/2014 00:13:12 14 INF                  Leaving function Farm.IsJoinedToFarm
03/27/2014 00:13:12 14 INF                  The parameter upgradesessionid is chosen, so returning the value as c81cccd6-5e02-4a35-b627-923fb6da03e9
03/27/2014 00:13:12 14 INF                  Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF                    Setting the upgrade mode to inplace
03/27/2014 00:13:12 14 INF                  Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF                  Creating security token service application for this farm ...
03/27/2014 00:13:12 14 INF                  Successfully created security token service application
03/27/2014 00:13:12 14 INF                  Creating service connection point for this farm ...
03/27/2014 00:13:13 14 WRN                  Failed to add the service connection point for this farm
03/27/2014 00:13:13 14 INF                  Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 INF                    Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
03/27/2014 00:13:13 14 INF                    Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection
Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
03/27/2014 00:13:13 14 INF                  Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 WRN                  Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container
exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=test,DC=com doesn't exist in the directory.
   at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
03/27/2014 00:13:15 14 INF                  Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF                    Spawing off the upgrade job
03/27/2014 00:13:15 14 INF                  Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF                  Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF                  Entering function ServiceHelper.TryToStartService
03/27/2014 00:13:15 14 INF                    Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF                    Entering function ServiceHelper.Start
03/27/2014 00:13:15 14 INF                      Trying to start service SPAdminV4 and waiting 180 sec to do so
03/27/2014 00:13:15 14 INF                      service SPAdminV4 is Stopped, will try to start it
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:44 14 ERR                      An exception was encountered when trying to start service SPAdminV4
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                        Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                          Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                            Resource id to be retrieved is ExceptionInfo for language
English (United States)
03/27/2014 00:13:44 14 INF                            Resource retrieved id ExceptionInfo is An exception of type
{0} was thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                          Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                        Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR                      An exception of type System.InvalidOperationException was thrown. Additional exception
information: Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
03/27/2014 00:13:44 14 INF                    Leaving function ServiceHelper.Start
03/27/2014 00:13:44 14 ERR                    Failed to start the SPAdminV4 service.
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                        Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                          Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                        Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR                    An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
03/27/2014 00:13:44 14 ERR                    Task upgrade has failed with an unknown exception
03/27/2014 00:13:44 14 ERR                    Exception: System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception:
The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                      Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                        Resource id to be retrieved is ExceptionInfo for language English (United States)
03/27/2014 00:13:44 14 INF                        Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
03/27/2014 00:13:44 14 INF                      Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                        Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                          Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                        Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR                    An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                        Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                          Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                        Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                    Entering function get CommandCollec
adil

Crystal Reports 2008 Error Installing Service Pack 1

Hello,
I am trying to install Service Pack 1 for Crystal Reports 2008 on Windows 2008 Server as an adminstrator and I get the following error message:
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a fold containing the installation package "CrystalReports.msi" in the box below."
Also, I have been unable to complete the registration wizard because I do not get a 10-digit registration number when I complete the registration process at www.sap.com/solutions/sap-crystal-solutions/productregistration . I don't know if this problem might be causing the Service Pack 1 to not install.
Thanks,
Michele

Hi Michele,
Windows 2008 is not officially supported yet but it is for Vista and Windows 7 after SP 2.
To get it to work uninstall first, make sure you keep your keycode and then download SP 3 full build:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
Then it should work.
Thank you
Don

Volume Keys not responding after installing service pack 1.

Okay, I've scoured the internet, and I can't find anyone else with a similar problem or a way to fix it, hopefully ya'll will have an answer:
I recently just updated my Vista Ultimate Operating System (using Bootcamp) to service pack 1. Prior to installing service pack 1, when I pressed F3-F5 on the keyboard, they would respond in the same manner that they would on OS X where F3 would mute, F4 would make the sound lower, and F5 would increase the sound.
However, after Service Pack 1, the buttons do nothing more than mute and turn on the sound. I reinstalled the Boot Camp drivers, ran all the software updates (found no updates on both apple and windows), and tried to repair Vista from the original install disk. Nothing helped.
However, here's the thing: When I press the buttons the same little overlay comes up displaying the sound volume, but there's a big 'denied' circle on the bottom of it. To describe it slightly better, there's a circle with the line through it(looks like a no smoking sign), placed over the squares representing the volume on the overlay to show volume control.
I'm lost as to what to do since all the other keys work, including the brightness control, and they worked before I installed Service Pack 1. Has anyone else had this problem or know how to fix it?

i just uninstalled SP1 and it went back to normal,
go to Control Panel and on the left side theres something called "view installed updates" go there and just uninstall SP1 and your fine. but if you need sp1, i don't know how to help you there.

Labview won't close down properly after installing Service Pack 2

Hi,
We installed Service Pack 2 for Windows XP recently and ever since, I've had trouble closing down Labview. I'm using Labview 6.1 and whenever I try to close it down, it won't fully close down and I have to use Task Manager to shut it down.
What happens is that I get a minimised window on the bottom of the screen that won't go away.
Has anybody seen this before and can anybody help.
Thanks,
Kenneth

tbob wrote:
In my experience, SP2 for XP introduced a whole lot of bugs and mishaps. You would be better off uninstalling SP2 if you can. If you want to keep SP2, you may have to uninstall Labview, then re-install it.
I personally can't confirm this statement. I have XP SP2 with the latest patches applied and I have not really problems with LabVIEW 6.0, 6.1, 7.0, and 7.1. Only NI-Max likes to crash sometimes but since it is a notebook I have little reason to run NI-Max until now.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I open a picture file in PS Elements after installing service pack 2?

Since I installed service pack 2 on my HP computer a week or two ago, the Photoshop "Open" tab no longer appears at the top of my Pictures screen, but rather a "Preview" tab, and I haven't been able to open a picture in Photoshop. Instead, when I double click on a picture, it opens in Windows Picture Gallery. Not long after I installed service pack 2, I also changed my default browser from Internet Explorer to Mozilla Firefox, so I don't know if that has anything to do with it. Thanks...

Reinstall PSE or manualyl adjust your file associations.
Mylenium

Trying to install Service Pack 1 from updates

I decided to restore my home computer to the Factory Setting Configurtion. Now when I try to install the Vista Service Pack 1,
it dose not install but it says it did install correctly after it was down loaded. My history says it installed 5 times now but
it has not. I am trying to update Internet Explorer 7 to 9 or higher but I can't get past installing Service Pack 1 which will
not install.I try installing service pack 2 which will not install becauce service pack 1 is not installed. This is a brand new
installation of Vista Home Pre. from Factory Settings Disk 2007. I have install all updates I can install. Then I also look at
Windows updates in my computer and it is not there, thow it shows in History Updates.Please Help MCSE Richard Sedore
Thank You.

For Macs with built-in Optical drives, you will need to burn the ISO to Optical media and use the Optical drive.

Error after install Service Pack 4

Put weblogic510sp4boot.jar as the first package in your JAVA_CLASSPATH
and
Put weblogic510sp4.jar as the first package in your WEBLOGIC_CLASSPATH
Cheers - Wei
Min Zheng <[email protected]> wrote in message
news:[email protected]...
Hello,
I have following errors when I start WL:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
This erros happend only after I installed Service Pack 4, and change the
weblogic.class.path.
Thanks,

Problems installing Security Pack

I have problems installing Security Pack on SuSE 9.2 Pro (with
update-patches):
bgnl2:~/install/tarantella4 # chmod u+x tspi3li.shx
bgnl2:~/install/tarantella4 # ./tspi3li.shx
Tarantella Secure Global Desktop Enterprise Edition
Setup is verifying the shx file...
Setup is checking for disk space requirements...
Secure Global Desktop Security Pack for Intel Linux kernel 2.4+
Preparing for installation...
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/ttasecure_inst.log, and then try
again.
bgnl2:~/install/tarantella4 # cat /tmp/ttasecure_inst.log
===========================================================================
Starting Setup
===========================================================================
9+0 records in
9+0 records out
===========================================================================
Installing package <ttasecure>
===========================================================================
2+0 records in
2+0 records out
Pre-request detail for package <ttasecure>
---> ttasecure.prerequest
498+0 records in
498+0 records out
Extraction detail for package <ttasecure>
Transferring <ttasecure> package instance to
</tmp/ttainst_4/ttapkg.19811/pkg> in file system format
Install detail for package <ttasecure>
PROCESSING:
Package: Tarantella Secure Global Desktop Enterprise Edition
Security Pack for Intel Linux kernel 2.4+ (ttasecure) from
</tmp/ttainst_4/ttapkg.19811/pkg>.
Tarantella Secure Global Desktop Enterprise Edition Security Pack for Intel
Linux kernel 2.4+ (i386) 4.00.903
Using </> as the package base directory.
Tarantella, Inc.
ERROR:request script did not complete successfully
Installation of Tarantella Secure Global Desktop Enterprise Edition
Security Pack for Intel Linux kernel 2.4+ (ttasecure) failed.
No changes were made to the system.
Script detail for package <ttasecure>
---> request
<--- request
What can I do to fix this?
Thanks in advance!
Jakob Breivik Grimstveit

Each of the two security updates for Yosemite required a restart once the update had been installed. Did you in fact perform these restarts?
If you are in doubt, go to About This Mac (under the Apple logo in the Menu Bar). Then choose System Report > Software Installations [requires scrolling way down on the leftmost column] > [look for security updates to be logged there]

Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)

Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.

Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked.

Installing Service packs

Hi All,
I have the following question about installing service pack 1 for 2008 R2.
I know that it is recommended by Microsoft to ensure the stability of the system etc.
My question is it less secure to only install security patches and no service packs? (is it ok to have a 2008 R2 machine with all security
patches but without SP1?)
Or is it ok if we install all security patches?
I have run baseline analyser and it lists sp1 as a security update..
Is it only because there are also security patches included or also because it is required for future security updates?
Thanks

A service pack contains previous updates and new functionality combined and thus contains security fixes too. The release of the service pack extends the support lifetime for the product, as long as you obviously have installed the service pack.
Support ends 24 months after the next service pack releases or at the end of the product's support lifecycle
This means 2008 R2 (without service pack)
support has ended somewhere in 2013. Since, no security patches are made for that OS version.
You should really install the service pack, even if you have very good reasons not to.
MCP/MCSA/MCTS/MCITP

Fix for continuous reboot after installing Service Pack 3 in Windows XP

After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
Issue: The computer reboots continuously after installing Windows XP service pack 3
Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
Cause:
On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
Symptoms:
Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
Solution:
If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
Step 1: Please try to log on the system in safe mode.
1. While using Safe mode open the command prompt.... Start, All Programs, Accessories, Command Prompt
Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
Step 2:
If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
2. Using recovery console:
If you booted into the recovery console, from a command prompt, type: disable intelppm
Step 3: Please check in registry.
3. Using windows registry:
1. Run regedit
2. Click on HKEY_LOCAL_MACHINE
3. From the File menu, select "Load hive"
4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
5. Name it something you can remember, such as "horked"
6. Navigate to horked\ControlSet001\Services\IntelPPM
7. Double click the Start value and set it to 4
8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
9. Repeat steps 6-8 for the other control sets.
10. Reboot
Reference:
http://support.microsoft.com/kb/888372
Additional information:
Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
For future reference: Service pack 3 Installation steps:
Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
Step 1:
Uninstall service pack 3 from add/remove programs:
1. Click Start.
2. Select Run.
3. Type appwiz.cpl in the run field.
4. Click OK.
5. Click change or remove programs.
6. Select the program -service pack 3 that you want to uninstall or remove.
7. Click Remove button.
8. It will pop up the message stating that "Are you sure you want to remove the programs".
9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
Using Microsoft System Restore in Windows Me and XP:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Step 3:
How to obtain the latest Windows XP service pack :
http://support.microsoft.com/kb/322389/
Steps to take before you install Windows XP Service Pack 3:
http://support.microsoft.com/kb/950717/en-us
I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

How to install service pack or hotfix?

Guys,
My number of installation (help>> about xcelsius) is 12.0.0.121.
I would like to install the service pack and hotfixes available for xcelsius to correct the problems of the tool.
someone can explain me step by step how to do this?
Thank´s all.
Anderson

Hello,
Step 1: Install SP1,this will replace your RTM version of Xcelsius ,you can download it from here.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Step 2: Install FP1,upon completion of installation the Help > About Xcelsius version should show a build version no; of 12.1.1.344. Again you can download FP1 from here,
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Good Luck!!
-Purnima

Problem Installing Service Pack 4

Similar Messages

Maybe you are looking for