Problem One-to-One Linksys RV042 failing

I'm having problem with the function One-to-one of the router RV042.
Access through the NAT function works normally until a certain moment redirection are being made to another address of LAN that are not correct.
Just restart the router and NAT function normally again.
I have the most current version of firmware v1.3.13.02.
Anyone ever had this problem so that you can help me to solve?

These products are being handled by the Cisco Small Business Support Community. (URL: https://supportforums.cisco.com/community/netpro/small-business )

Similar Messages

If my iPod Touch 5 battery is failing, can I pay Apple to send me a refurbished one before I send them the one with a failing battery? I don't want to go without my ITouch.

If my iPod Touch 5 battery is failing, can I pay Apple to send me a refurbished one before I send them the one with a failing battery? I don't want to go without my ITouch. I really don't want to go without it but I dont want to have to purchase a new one. The battery life is abysmal, and I am reluctant to upgrade my ios system to ios8 because all I ever see are complaints about upgrades killing the battery. I am still on ios6. When I upgraded my macbook pro (which is now DEAD) the battery got worse.
I am just sick of it. I called apple about my itouch battery and the help was terrible. All they were telling me to do was do a restart and UPGRADE TO THE LATEST IOS TO SEE IF THAT SOLVES THE BATTERY PROBLEM. They would not even tell me what to do if that would not work. Very rude.I kept asking and I finally had to find out myself through my own research that they cant replace the battery; instead they send you a refurbished ipod. They never told me that on the phone and they kept giving me the run around when I kept asking them what I should do if the IOS upgrade did not work or made the battery worse. Hopefully someone can answer my initial question. Thanks guys. I have a charger that I sometimes use plugged in to the ipod ( not all the time, I know that is bad for the battery) and I thought my battery life should be better than it is because I sometimes use it on the charger ( it should save the battery).

Not that I know of. You can do the exchange at an Apple store if they have refurbished ones in stock
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

No more possible to connects one Linksys 54GL to another linksys 54GL

I bought two Linksys 54GL at the same time last year. I configures as following: one linksys (A) was to choose PPPoE with user name and password provided by my ISP, The Internet port of the second linksys 54GL (B) was conntected to any one LAN port of router A, and Internet connection type was to choose Automatic configuration DHCP. It works well in this manner f for both wired and wireless connection for both router.
Suddently, the router B did work no more. I had no more wired and wireless Internt connection for router B. But router A still works well for both wired and wireless Internet connection. But I could login to router B with 192.168.1.1 and I had wireless signal(no Internet connection).
In order to test if the router B is dead, I reconfigured router B as Router A , directly to my ISP with username and password and PPPoE, connected directly to my DSL modem, and it worked well for wired and wireless connection.
Finally, I reconfigure router B to its original: Automatic Configuration DHCP as I did at the beginning. It is strange: still no more Internet connection for router B (both wired and wireless) but we can access the router Band had its wireless signal.
I understand no more why I had this strange problem. Both router use firmfare 4.30.14

About your first router it can be resolved by a firmware upgrade .You have to configure the second router manually.

Query running fine in one environment but failing in other environment

Hi,
I have a query which i am trying to execute in two different environments.
Test :- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Prod:- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Now query executes finely in one environment and fails in other environment.
It gives following error.
ORA-01861: literal does not match format string
01861. 00000 - "literal does not match format string"
The query is too long and contains CHAR-DATE and DATE-CHAR conversions.
The same query works fine on TEST environment and and fails on PROD environment.
Any help related to it would be appreciated.
Thanks,
Mahesh

MaheshGx wrote:
Hi,
I have a query which i am trying to execute in two different environments.
Test :- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Prod:- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Now query executes finely in one environment and fails in other environment.
It gives following error.
ORA-01861: literal does not match format string
01861. 00000 - "literal does not match format string"
The query is too long and contains CHAR-DATE and DATE-CHAR conversions.
The same query works fine on TEST environment and and fails on PROD environment.
Any help related to it would be appreciated.
Thanks,
MaheshThat's called a bug. One caused by the person who developed the code. They relied on implicit conversion between strings and dates when
production quality code will always use to_char and to_date functions with a format mask.

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

"You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
Mac 101: Time Machine

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Call Apple Support

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
Regards,
Ujjal

Backup your files to a external hard drive and disconnect.
Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
You can run these things and it might clear your issue or give further informaiton
Perform a hardware check
http://support.apple.com/kb/ht1509
Then see if resetting the SMC/PRAM resolve your issue
http://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379

PROBLEM-ONE OR MORE FRAMES WERE DROPPED DURING PLAYBACK... HELP...

Hallo...
I am very new in the Final Cut Express... I import .MOV documents in my computer and then to a new Project in the FCE... I move to the viewer the pieces I want to create, then when I try to see them it reports me the PROBLEM " ONE OR MORE FRAMES....",
I import data from a Canon EOS 500D....
When I do the same in the Imovie it has no problem...
I read somewhere that "The two specifications are completely different. Your media is not support for editing in Final Cut. It's the wrong frame size, frame rate, and codec. The media should be converted to the Apple Intermediate Codec at 1280x720 29.97fps. You need to use a sequence preset that matches that. Apple does not support the use of USB drives with video applications."
I dont know what are all these... but I tried to change in the EASY SETUP of FCE everything and try it to see if something happens... IT HAS NOT Apple Intermediate Codec at 1280x720 29.97fps IN THE EASY SETUP....
I CANNOT UNDERSTAND.... I HAVE A CANON HD VIDEO MACHINE.... I JUST WANT TO IMPORT MY VIDEOS... MAKE SOME SIMPLE CHANGES, CREATE A VIDEO.... IN ORDER TO USE IT IN MY JOB... WHY IT IS SO HARD WITH FCE??????????????? IT DOES IT IN THE IMOVIE..... SO HERE WHAT IS THE PROBLEM....
AND IF SOMEONE WANT TO ANSWER PLEASE CONSIDER THAT I AM NEW IN THIS PROGRAM ... I AM GREEK AND I DON'T UNDERSTAND PERFECT ENGLISH.... SO BE SIMPLE AND EXPLAIN WITH SIMPLE STEPS HOW IS THE PROBLEM SOLVED....
I READ IN THE FORUM OTHERS HAVING THE SAME PROBLEM AND YOU WERE NOT ACTUALLY VERY HELPFULL......

What you read is absolutely correct. You need to use a conversion app, such as MPEG Streamclip (http://squared5.com) to convert the H.264 files from the Canon into Apple Intermediate Codec files, based on the frame rate and resolution you shot the footage in.

After ios7 update my iphone is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing fans like me y they spoil his name ??

after ios7 update my iphone 4 is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing apple have unique and unique fans like me why they spoil their name like this update iam too disappointed iam not say for oppose apple iam say for feedback to grow apple in world because i love apple more please solve it
by real customers
iPhone 4, iOS 7, iam apple suporter

please help me after ios7 update my phone is tooo slowww i want my old iphone

How to role back when one command in failed in batch

Hi,
first my doubt is
if one command is failed in batch statement entire batch will fail or only that is failed
if only corresponding is failed then how to role back entire batch
String sql = "DELETE FROM table1 where row1=1";
String sql1= "DELETE FROM table2 where row2=2";
st=con.createStatement();
st.addBatch(sql);
st.addBatch(sql1);
st.executeBatch();
con.commit();
with regards

Hi,
Where are you executing the SQL staements.
If you are writing a Oracle procedure then after each DELETE you can have a SQL%ROWCOUNT , if it is not > 0 then you can rollback THE TRANSACTION.
thanks
Message was edited by:
hkandpal

Data wipeout or locking due to one to many failed passcode attempts

I just noticed that on the iPad there is a setting where if you have one to many failed attempts at the passcode the data is wiped from the iPad. Yet I don't see anything like it on the iPhone.
Is there something akin to it, like after one too many tries the phone locks you from any more attempts?

Yes there is.
Settings => General => Passcode lock
Turn on erase option for 10 failures.

HT201210 I have 4 email accounts. One email account failing on the ipod only

I have 4 email accounts on my ipod (yahoo, gmail, icloud and insight).
Only one of my email accounts(insight) quit presenting the new email two days ago.
I can pull the email on my laptop and desktop but not on the ipod.
Need help getting my main email account to show new email,
It seems to get email from server but will not show it on the screen.
All other email accounts I use still work.
I already rebuilt the entire ipod from the cloud; removed and reinstalled that email account,
It still fails to present new email on that one email account.
The other three accounts work fine.
HELP
The only one that still fails to work is the insight one.
Out of ideas now.

Hello. Do you see all accounts in "Mail, Contacts and Calendars?"
If you do, make sure you have hecked the boxes of the feartures of each account to work on your Mac. Example, I have a Google account, and when I click on it, I can select if I want to sync Mail, Calendars, Notes or Messages.
Please take note that I am referring to setting them up on the MacBook Air and not the iPhones.
Hope this helps.

HTC One and Verizon Fail

>> Duplicate post removed to comply with Verizon Wireless Terms of Service. See HTC One and Verizon Fail <<
Message was edited by: Verizon Moderator

Every company has different phones and features...vzw has plenty of phones with an fm radio.. It never hurts to do a little research when buying a big ticket item like a $600 cell phone...

Communication problem the web server extension (WGATE) failed to receive a

Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PK

HI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel.

Linksys RV042 Dual Wan with Load Balancing Help?

Good day,
I'm a newbie to routers. I have purchased a Linksys RV042 hoping I could connect my two modem and provide internet to my collegues in the camp. My internet connection is running under EAP-TLS using a Motorola modem from Go Telecom here in Saudi Arabia. Need help to configure the router to accept the two modem.
Thanks for the reply.....

Hello David,
Glad you could spend some time with my problem. Tried the solution you sent but still unsuccesful to connect to internet. Is there something wrong with the WAN credentials I'm using? Do I have to switch the mode from Gateway to Router? Please take a look at my WAN1 values that I wrote in the RV042
I am using a Motorola CPE outdoor Wimax modem from GO Telacom here in Saudi Arabia...

Problem One-to-One Linksys RV042 failing

Similar Messages

Maybe you are looking for