Problem printing static images vs camera tool snapshots

Hi.
This question might be a matter of formatting instead of a developer question but since it is related to some VBA code I am using I thought it would be appropriate to post here. If it isn't, can someone let me know which forum would be more appropriate?
Here's the situation. I have a workbook that has many tables on separate worksheets. Then I have couple "summary" type of worksheets which contain camera tool snapshots of tables from different worksheets for easier viewing/printing.
Because of the heavy lag in recalculation time created by using camera tool snapshots, I have turned the snapshots into static images by removing the source range from their formula. Instead, after making whatever changes I need in the data, I use a
VBA macro to loop through each snapshot and briefly restore the source range formula so that it updates to reflect the latest table changes then clear the source range formula again, returning the snapshot to a static image. This seems to work fine when
I view the worksheets and makes the recalculation of the tables much faster when changing the data.
However, I have encountered a new problem. If I print the summary worksheets with the static images, each table is printed as smaller than when they are snapshots. In other words, when the source range formula is set to the appropriate range
and I print the sheet, everything looks fine. When I clear the source range formula and print the sheet, each table is now horizontally smaller and some information in the last column is being cut off. The images/snapshots have their size set to
100% of the original and I have tried keeping "Relative to the original" checked and unchecked with no difference. Does anyone know why this is happening?

It may not be the images. It may be the print options are set to auto scale the worksheet. Try manually printing a one test page and try different print scale options. Use Print Preview which will allow you to scale page sizes.
Often issues like this occur when you are trying to print more than one page at a time. The scale on one page may be different from a second page. Sometimes adding page breaks (horizontal and vertical) helps solves these issues.
jdweng

Similar Messages

I have reinstalled CS5.1 extended on my new Lenovo Laptop with Win 8.1 64 bit. No installation problems, but now Image Adjustments and tools do not work any more.

Operating Problem with CS5.1 extended. I replaced my old HP Laptop with a new Lenovo laptop with Win 8.1 and reinstalled CS5.1 64-bit version. The software downloaded and installed correctly and worked for a day, but when I rebooted the next day, the Image Adjustments and tools functions did not respond any more. I have uninstalled and redownloaded/ reinstalled without success.

Notebook Info
1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
8192 MB DDR3-RAM
Harddisk: 1000GB SATA
NVIDIA N15V-GM mit 1GB DDR3
Prefs
As per download settings, I changed nothing
Image Info
Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
I then downloaded and installed on my PC and everything works.
Regards Roland

Problem printing as image

I'm attempting to print a pdf as an Image in acrobat x. Unfortunitly I keep getting an error saying document cant be printed. Any ideas to why this might be? I am sending the file from acrobat x on a 3.06 Imac to creo rip software to be printed on a xerox 700 digitla press.

Kindly update the Acrobat 10 upto 10.1.5 and let us know if the issue still exist.
Does it occur only if you perform "Print As Image" ON or otherwise as well? Try turning off "Auto-Rotate" setting by going to the printer properties and let me know if this helps?
Thanks,
Atul Agarwal
Adobe Systems

Problem printing JPG images in Safari 5.0.1

Hi!
I have an application that prints an html with some information and some images.
The problem is that when I print it, some of the images in the html are not in the print area, they appear as if they were white images. This is happening only with jpeg (or jpg) images. With PNG files I'm not having this issue.
I'm using Safari 5.0.1 in Windows 2008.
Is it a bug in that version for Windows? As I've tried this in a Mac and it prints the jpeg images correctly.
Thanks in advance.

I can use Google street view on v10.5.8 Safari 5 also.
If you want to revert to Safari 4.0.5, go here for instructions.
http://appletoolbox.com/2010/06/downgrade-from-safari-5-0-to-safari-4-0-5/
(I'm obsessive about 'cleaning' my Macbook!)
You may have inadvertently "cleaned" out necessary system files.
How are you doing this cleaning?

I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick.

Problem printing Report with Image in BI Publisher 11g

I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
When I tried printing PDF in output I get
Type /Xobject
subtype /Image
Filter /DTDDecode .......
When I tried printing HTML output I get
Type /Xobject
<html...
....>
When I tried printing RTF I get
{ \fontb1 }
{ \f0 Arial;}
{ \f1 Times:}
I think I am missing some BI publisher configuration. Can you help me in this regard.
Thanks,
Santosh
Edited by: user4956795 on Jan 16, 2012 2:08 PM
Edited by: user4956795 on Jan 16, 2012 2:18 PM

Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser

When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the pastiPhoto cannot import your photos because there was a problem downloading an image.

When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the past, "iPhoto cannot import your photos because there was a problem downloading an image."

Can you access the images with Image Capture (in your Applications Folder) ?

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

Hello,
Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
Regards,
Nakul

IPhoto 08 contact print problems - after 5 images. prints pt a screenshot

iPhoto 08 contact print problems - after 5 images. prints pt a screenshot

Okay - So, I teach photography and have my students print contact sheets from iPhoto version 08. I have one student (out of forty) having the following problem (I have removed preferences, reinstalled iPhoto, used the iPhoto updater for 7.1.5, reloading the printer driver and upgrading the system software to 10.6.8 {I teach in a high school, so no funds for newer software})
The problem is isolated to one student - the others on the same machine do NOT have the same problem. When this student selects more than 5 images, the resulting output looks as if he has taken a screen shot - the palettes on the left of the frame show and the titles he has inserted (using Batch Change) are moved on to the pictures.
At this point, I am going to let him screenshot his submissions, just wondering if anyone else has had this problem.
Thanks!
Sandy Snyder

Windows 98 problem printing Images?

I am able to print an Image from file at work on NT. However, when I develop at home on Windows 98 the printer job just spools and never prints.
I have a HP Deskjet 932C printer at home. Any chance HP software is overriding ability to print from DOS java application? I shut down several background tasks, Nortan AV(as I've heard this slows down resources).
I really don't know what else to try. Any help would be awesome.
(what's weird is it will print everything else (drawString(), drawRect(), on 98 but not drawImage()?
thanks ahead of time,
jmschrei

Was a HP Deskjet driver problem.
Figured it out.
jmschrei

Imported RAW images badly corrupted, looks like red paint splashed all over the sky. Photoshop and Iphoto have no problem with the images from my D800E. Aperture worked fine for me in June with the same camera. The Nikon software shows no problem.

I am having a problem importing my images into Aperture 3 from my Nikon D800E. The images appear as if red paint was splashed across the sky. The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software. Aperature does not even like the jpg images usable by Photoshop. I am suspecting that Aperture is not correctly using the camera raw file. Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions. Aperture worked just fine for me in June with the same camera. All drivers and software are current as of this posting. Anyone else out there seen this before??

Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
Aperature does not even like the jpg images usable by Photoshop
If the JPG's have the same problem then it isn't this bug.
regards

Officejet j6480 sometimes not printing entire image: printer or software problem or conflict?

Dell Inspiron, windows xp-pro, version 5.1 sp 3,
software: microsoft digital image 2006
I've been using digital image (DI) for several years and have never encountered this issue before now, but my printer is new and has some features I may not entirely understand.
I've created 4 separate images for a t-shirt transfer using DI. 2 images each are set up on an 8.5 x 11 layout, landscape mode. They were "cut out" and placed on each layout for printing. On my monitor, each image is a complete image: ie, no part of either image is missing or blocked out. However, when I print the document, sometimes part of one image doesn't print. The actual printed piece looks like an object or "blank" box was placed on top of the sheet of paper before printing, printed, and then taken off the printed paper leaving no ink beneath it.
DI allows you to cut out a photo and use the cut out with no background which is what I've done. The cut out follows the line of the object, dogs head, for example. The edges are not straight as if in a frame, however when the object is selected for editing, a dotted frame does appear around the edge. More than one object can be selected at one time and there can be an overlap of these frames, but once the object is deselected the frame disappears.
What really has me baffled is that the missing part of the image is squared off on two sides, is always in the same spot on the paper, completely different documents print the same way, you can see where the edge of the missing piece printed, but very light in color, and the document does print out correctly, sometimes.
Sorry to be so long winded. I'm trying to preserve the transfer paper since it is expensive and don't want to chance an incomplete printed sheet having to discard it and start over, hoping "this time it will work!"
Does anyone have any ideas? I know it sounds like a software problem but it also sounds like a printer problem, or both.

Hello @rslade , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having problems printing in colour. I would like to help!
Do you have any issues making a colour copy, as opposed to a print?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reiadding the printer:
Installing a Mac Printer Driver Using Apple Software Update
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problems with Unified Camera tool

Let me preface this with the fact that I'm very new to After Effects and have been self taught over the last week or so.
Working on creating a 2D-3D fly-through with a landscape photo. Got it set with key-points to fly through the 8 layers from beginning to end, but was working on changing the camera angle at a few points. I was able to use Unified Camera tool to successfully do that, and then all of sudden it stopped working- When I went to click on Unified Camera tool, it shows the icon until I actually click on the screen and then it automatically switches to Orbit Camera tool for some reason. Is there any setting that you know of that I've hit that makes it so that Unified Camera tool won't work?

You have a double post going here. It's very hard to tell what is going on in your composition because we can't see the layer properties of any of your 3D layers.
I'll post a copy of my answer here:
How are you trying to adjust the camera? I think you are probably going about animating a camera along a path using a very awkward and tiresome workflow. By far the easiest way to animate a camera along a path is to place a null at the same position as your camera, parent the camera to a null, then animate the null. Camera path and the angle of the camera can be animated easily by animating the null even if you have a two node camera. If you have a one node camera you can independently animate the orientation or x, y, or z rotation of the camera independently of the null. This is a better way to work with either type of camera.
As Mylenium said, without seeing a screenshot of your comp with all problematic layers properties revealed we can't know what is going on. I also have no idea what you mean when you say it will show the Unified Camera tool until I click. Click where? Pressing the C key will change to the camera tools in the comp window. The first time you press C you get a unified camera tool. If you have a single node camera selected the unified camera tool adjusts orientation. If you have a 2 node camera selected, the unified camera tool adjusts camera position because the angle is controlled by the point of interest. Clicking the and dragging the unified camera tool always gives you an orbit icon. You cannot dolly in and out with the UCT. Never have been able to do that. You cannot change orientation with the UTC if you have a two node camera selected.
I think you are just not remembering how the tool works. BTW, using the unified camera tool to tilt up (no such thing as a pan up) with a two node camera will lower the camera position, but on a one node camera it will change the x orientation (mostly) of the camera. In either case, you'll find better results using a null at the camera position as a dolly for the camera.
Here's a short tutorial that may help you a bit. One of these days I'll record a comprehensive animating a camera tutorial.
If you follow this tutorial but paste the path to a 3D null called dolly, then use the temporary null to rotate the dolly to YZ, then parent the camera to the dolly null you won't have to set a two node camera to orient along the path and you'll have more options.

Quality problem printing in Windows 8.1 with CP1215

Recently purchased new laptop with Windows 8.1 Pro. I have had my printer for years, CP1215, via USB, without having any problems printing to it with Windows 7 Pro. I first noticed that the quality of print I receive out of my printer on the new laptop is darker. The darkness comes from black lines going diagonally across the page. I would estimate at approximately a 2 degree angle. I would also estimate that the lines appear every 4th pixel row. I have attached 2 images, printed on 2 different printers. The one on the top is the one off of my CP1215, the one on the bottom is a color copier in my office. I have zoomed in incredibly on the prints to show the lines. Just never had problems with this printer in pre Windows 8.1 days. Tried installing ljcP1215-HB-pnp-win64-en. Tried uninstalling printer, rebooting, then installing, still same problem. I also have another problem with printing, but suspect it is more of a Microsoft problem. My laptop thinks a network printer goes offline, stopping and restarting the print spooler service seems to fix that. I had to make a .bat file on my desktop to do it, it happens at least 2 times in an 8 hr work day.

Hi paulie99, Welcome to the HP Forums, I hope you enjoy your experience! I understand the printer isn't printing properly from Windows 8.I will be happy to help you. Check your printer driver settings. 1. On the File menu in the software program, click Print.2. Select the driver, and then click Properties or Preferences.3. Click the Paper/Quality tab.4. In the Type is or Size is list box, select the correct media type or size. Set the quality to ImageREt 2400. I have provided a document to install the Windows print driver to see if that makes a difference.Installing the Printer Software in Windows 8.1 for a USB or Network Connection. For the network printer I would setup a static IP address. Please let me know the results if you are still having issues. Thank you for posting on the HP Forums.Have a great weekend!

Problems printing a grid

Hi,
I'm trying to print a 1mm X 1mm grid in a paper.
I'm using Java2D to print the lines. This is the code snippet which draws the lines:
     /** Pixels/millimeter ratio */
     public final static double PRINT_PIXELS_PER_MILLIMETER = (72.00 / 25.40);
          g2d.setStroke(new BasicStroke(0.3f));
          int counter = 0;
          for (double x=bounds.x;x<=bounds.x + bounds.width;x+=PRINT_PIXELS_PER_MILLIMETER) {
               g2d.setColor(((counter % 5 == 0) ? Color.GRAY : Color.LIGHT_GRAY));
               g2d.draw(new Line2D.Double(x,bounds.y,x,bounds.y + bounds.height));
               counter++;
          counter = 0;
          for (double y=bounds.y;y<=bounds.y + bounds.height;y+=PRINT_PIXELS_PER_MILLIMETER) {
               g2d.setColor(((counter % 5 == 0) ? Color.GRAY : Color.LIGHT_GRAY));
               g2d.draw(new Line2D.Double(bounds.x,y,bounds.x + bounds.width,y));
               counter++;
          }The grid prints OK into ink printers, but when I try to print the grid in laser printers, some lines appear greater than others and the grid appears visually antiesthetic.
I've tried to do it with a background image. The problem I have is if I create the image at 72dpi, the grid paints ok but the lines are too thick. Then I created a 300dpi image and draw it, but then the grid lines were drawn too separated the ones from the others (a lot more than 1mm). If I re-scale the 300dpi image in the paint routine, then I have the same problems than when I was drawing the lines.
By the way, the laser printer has more than enough resolution to paint the 300dpi grid correctly. If I print the image directly from photoshop, it is printed perfectly with 1mm separation b/w lines.
Anyone knows how can I solve that?

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Problem printing static images vs camera tool snapshots

Similar Messages

Maybe you are looking for