Problem printing with Reader 9.4.5 and 10

I recently upgraded to Windows 7. I have a Cannon Pixma iP4300 printer and have installed the Windows 7 driver that I downloaded manually from the Cannon website. The test page prints on this printer, as do Office files and images. When I print a PDF, a sheet feeds into the printer, one pass of the print heads is made, and no further progress occurs. I have allowed over 10 minutes to pass, but no further printing occurs. The document is shown as printing in the printer queue, and the Cannon printer status window also indicates that printing is in progress. No error messages are reported.
I have uninstalled and reinstalled (separately) 10 and 9.4.5 and still have the same problem. Any suggestions?

I do a lot of graphic design work which means I work with a lot of fonts, 4880 to be exact. Since 2005 I have found a number of fonts that simply quit working with Windows Vista vs XP 7 vs Vista, and even in Mac OS X from one build to another. It also happened with Software like Acrobat, Reader, TurboTax, Firefox, and Office.
It may just be that this particular font no longer meets compatibility standards for Reader X.

Similar Messages

Problems printing with HP laser jet 5M and Snow Leopard

Hello,
Since In installed Snow Leopard on my mac I can no longer print with my HP laser jet 5M.
I know this is because Appletalk is no longer supported, and that I should use the laser jet as IP printer. However, I couldn't figure out how to assign an IP address to the printer. It seems I can't do this by the config menus of the printer. I read somwhere it is possible to do this by terminal (telnet) but I am not familiar with unix.
Can anybody help me to solve this problem?
many thanks
Marcello

This should get you started
http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

Problem printing with Reader 10.1.6 using context menue.

After installing patch 10.1.6 some documents are not printing correct using the explorer context menue.
The Document contains a link like WWW.heise.de and is printing like X X X /I f jtf /ef
Open the Document and printing works fine.

Hi,
I am not able to reproduce the issue. Could you please share the document with which you are facing the issue.
Also tell me more about the environment e.g Operating System. Is this problem occurring only on printing from the context menu ?
Thanks.

Problem Printing with Reader 10.1.4

I have been trying to print a PDF this evening, that I have printed before. That was before 10.1.4 was AUTOMATICALLY installed. The document should print on an 8.5 x 14 page. I have also printed it in 8.5 x 11 format. Tonight it will only print in the smaller format. I am trying to print this to send it to a national organization, and they only accept the larger format.
I have tried printing it to "FIT" using the larger paper designation, but I get the smaller print. I have tried the next option (can't see it right now, more details to follow), but it didn't work either. When I use any of these options they all show (after I change to the larger paper designation) that they plan to print on the whole page, but when I hit print, it doesn't again.
I looked through the online help and found something that suggested there was a place for me to enter the percentage that I wanted to print it at, but I don't have that option on 10.1.4. The paper is very expensive so printing the wrong format is not a good thing.
I have uninstalled 10.1.4 (thus cannot see what that other option is called), with the intension of downloading an older version of Reader, but the download wizard will only give me the option for 10.1.4 based on my computer configuration. I know this is a neat option, so we don't get the wrong one, but I have used several versions on this computer in the past and I would like to get one of them back on it. No sense in installing 10.1.4 again, becaues it does not work.
Can amyone help me?

Moving this discussion to the Adobe Reader forum.

Printing with OSX 10.5.2 and Lexmark 5470 Work around

I just upgraded to Leopard. Like many people have had problems printing with my existing Lexmark printer. Upgraded to the latest print driver and now able to print, but, pauses. When brining up Que. am able to continue print process, but puts many pages into small space at one place on the paper. Tried removing driver and printer info and then reinstalling all. Still same problem. Have not found any solution to the direct problem and am still searching, however, I have found a WORK AROUND. If you used the print dialog box and select sending to PDF first and then print from Preview everything works just fine.
So what gives? The doc I was trying to print was from Firefox from the internet. So maybe it has something to do with the App being used. I did not try with Safari, but I will try next. If it works from Safari correctly then I can maybe assume that it is a problem from third party app software, since it printed fine from Apple's app Preview as a PDF.
Just a thought. Any other thoughts, please submit. I too am looking for answers.

appleray wrote:
Upgraded to the latest print driver and now able to print, but, pauses.
The compatibility page (http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596666691854_1177082303en,00.html) says that the x5470 is bundled with the 10.5 DVD so you should reinstall using that driver.
It's also a good idea to try with Safari. The fact that you were able to print with other apps seems to indicate that problem is with Firefox. What version are you using?

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Cs3 problem printing with mavericks

cs3 problem printing with mavericks

Hello @arcticbear38,
Welcome to the HP Forums!
I understand you're receiving a small portion on the left hand side of a document missing on both printers. I will do my best to assist you! Does this happen when you print from one program or many program(s)?
Both of these printers are not indicating low on ink? I would recommend resetting the printing system on your computer by following this Apple document here. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

I am having problems printing with my HP 800PS design jet.

I am have problems printing with my HP 800PS design jet. I have to call IT all the time and it is losing its print settings and the print screen will freeze uot all the time. I am told that HP does not support this product any more.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Cannot print with Reader XI

I cannot print with Reader XI. It keeps telling me I have not marked any pages to print even though I have. I finally had to uninstall Reader XI and open the pdf file through Google Chrome. What's the point to having Adobe Reader at all?

Hi Robert,
Please try the solutions mentioned below -
Solution 1 :-
Repair Adobe Reader, Help (Menu) -> Repair Installation.
Solution 2 :-
Try to print as Image, Quick fix | Print PDF as image | Acrobat, Reader
Solution 3 :-
Update the printer driver, please refer to this KB doc. for the troubleshooting steps Troubleshoot PDF printing | Acrobat, Reader
Let me know if the issue persist.
Regards,
Aadesh

SAPF150D-Dunning Notice Print - With Update of Line Items and Master Record

When I am running this program SAPF150D(Dunning Notice Print - With Update of Line Items and Master Records) with a variant containing run date, runc id, update mode, pimmed & pcount; the job is failing to execute. It is giving message like,
"The field symbol is no longer assigned because there was an attempt makde previously in a Unicode program to set the field symbol using ASSIGN with offset and/or length specification. Here, the memory addressed by the offset/length specification was not within the allowed area."
"GETWA_NOT_ASSIGNED_RANGE" "SAPF150D" or "F150DFS0" "SORTFELDER_ERMITTELN"

Hi,
Search for routine FORM SORTFELDER_ERMITTELN
in SAPF150D.
Put a breakpoint in statement
ASSIGN (T047F-FELDN) TO <H1>.
in above routine and debug to the point where error is occuring.
Most likely there is a mismatch in the length assigned to some field FELDN in table T047F.
In that case, simply change the T047F-LENGT field accordingly in change mode.
Cheers,
Vikram
Edited by: Vikram Jalali on May 27, 2008 5:56 PM

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

Hello:
I must apologize . I should have checked here first:
http://support.apple.com/kb/HT3669#HP
According to the list, there is no driver for your printer included in OS X 10.7.
There are a couple of options:
1. Contact HP to see if they have a workaround.
2. If the model of printer is not listed but your printer is a PostScript printer or PCL Laser printer, try the "Generic PostScript" or "PCL Laser printer" drivers. Generic printer drivers may not let you access all the features of your printer.
I have not tried #2, but some people have had success.
Barry

Problem printing Adobe Reader documents (PDF). Text files and MS-WORD print fine. Help?

I cannot get my ePrint to work with Adobe Acrobat (ReaderX) and pdf files. I get a "Failed to send" message. I have NO problems printing text or MS-WORD files so I know my Internet, printer, and local intranet are working. Help?

When you say the bottom right of you screen, are you talking about your computer screen? If you are then, you are not using ePrint, which is fine. You may just be having some wireless network issues. Try this. When it asks for the DNS information on step six, enter Google's public DNS (Preferred = 8.8.8.8 | Alt = 8.8.4.4). If that does not help, let me know and I will see what I can do.
By the way, if you are emailing the documents to your printer, which is ePrint, you are right about the file size limit, however, the limit is 5 MB. Most likely you are not Creating PDF or Docx documents that are anywhere near that size, so that should not be the issue if you are using ePrint. If you are using ePrint, try turning the router and printer off. Turn the router on and let it become stable. Turn the printer back on. Turn off and on any other devices that are connected to your wireless network as well, so they can re-establish network connection. Now retry the ePrint job. If that does not work, let me know.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Another problem printing with Aperture and Epson 2400.

Hi -
I posted this on photo.net a while ago and nobody could seem to figure this out. I've searched through here with no help either. Here is the original photo.net post presenting my problem:
I've been having a problem with my print workflow that started about 6 months ago but has only now gotten to the point that I really need to fix it.
My equipment: Epson R2400 with stock inks, Aperture (latest version), iMac 2.33Ghz fully loaded and updated. I typically print on Epson Premium Luster or Enhanced Matte (I change K cartridge accordingly).
Once upon a time, I had this workflow working perfectly. Prints were coming out exactly as I wanted them to, really better than expected. Then something changed, but it wasn't hardware. Somewhere along the line, I'm guessing in a software update, all my profiles changed. I typically do all my adjustments in Aperture, then in the print dialogs do the following:
+In the 2400 settings, I turn color management off, and in the Print Settings, I select my paper, switch to Advanced, and typically choose Best Photo or whatever quality I'm needing.+
+Then in the Aperture print settings I choose the ColorSync profile that matches the paper and quality I selected in the above Print Settings window, keep Black Point Compression checked, and I'm off. As I said - this has worked flawlessly up until recently.+
The one thing I noticed that has changed is the available profiles in Aperture's ColorSync Profile pulldown menu. It used to only show paper profiles specific to each paper and quality, ie. "SPR2400 PremLuster BstPhoto.icc". Now, it shows not only those specific profiles, but also more generic paper profiles, such as "SPR2400 PremiumLuster", with no quality specification.
The problem is this: When I now select the paper/quality-specific profile, as I used to do, the prints come out all washed-out and flat. It even shows this in the preview window. It's slightly better when I select these new generic paper profiles, but still not like what I had. This is true with both types of paper I use.
I've attempted all the usual fixes, such as trashing all my profiles and re-loading new ones from Epson, re-installing Aperture and Epson software, and trashing prefs. Heck, I've reloaded all software that even remotely related to photography so many times, I can't even count any more. Nothing - just washed-out, dead-looking prints every time. And it all changed when I noticed those new generic profiles mentioned above.
I did make one hardware change after I first started experiencing these problems. I went from a PPC Dual 2.8Ghz G5 to the iMac, but as I said, these problems first occurred on the G5 and continued with the new iMac.
Any thoughts?

Well, you could dump Aperture only to find that a 2.0 came along with OS 10.5 and fixed your problem, who knows.
And I wouldn't call 6 months of not being able to print anything at all from Aperture jumping to conclusions. When I press Apple P in any other application I get prints that even unprofiled will come out better than Aperture. It's serious. Not just sorta bad. The ocean looks like sewage water- not just mildly unappealing- sewage.
The solution for us, I suppose, is to buy calibrator hardware. I guess anyone who is professional should have one of these (and I do not) but I didn't buy Aperture to export for printing.
As far as how to get Apple to acnowledge this... I don't know. It seems as though they are tired of hearing me talk about this. This is the first post of recent about this that hasn't been deleted by an admin. Who knows? I'm just tired of having to buy all the hardware and all the software that is all supposed to work together and then once you pay, you find that you're up the creek for prints.
Don't get me started, or I'll start talking about how they don't support my camera make yet (or ever).... (Sigma). As you can imagine, I'm already IMPORTING 16 bit tiffs from my raw converter. I guess I need 3 copies of the same shot to do business in Aperture for now. I need some mylanta.
Otherwise, love ya Apple!
P.S. If you are looking for someone with the same hardware and problem as I, it's easy. Check out the print proofing podcast page on O'reilly "Inside Aperture". There's one there in the comments part (that I replied to). Others can be found on this forum.

Inconsistency and problems printing with Crystal Viewer

I'm printing from the Crystal Viewer based on the Crystal Reports Runtime 11.5 (R2) distribution.   the viewer is being instantiated from a .NET web application.   the report has been developed in Visual Studio 2005.
when I print from my development computer (with VS designer plug-in) the output to the printer is as expected.   however, when printing from any of my production client machines (no designer installed) the output is offset and any text at the top of the report is cropped such that only the lower half of the text is printed.    in either case the output is rendered correctly in the viewer prior to sending it to the printer.
the printer is being served from a central network server, hence the driver is the same regardless of the client machine.   I'm thinking there must be a difference in the CR components in either environment.
note I've also tried printing a test using other applications and no problem exists, only when printing from the CR viewer.
any info would be much appreciated.
vaderr.

May be that the worker process is not seeing the printer driver the report wants to use, so another printer driver is substituted. One way to test this is to insert these lines of code;
Dim myPrinter As String
For Each myPrinter In System.Drawing.Printing.PrinterSettings.InstalledPrinters
    Response.Write(myPrinter)
    Response.Write("<BR>")
Next
Is the printer driver you are trying to use visible to the process?
Another thing to try is to set the option "No Printer" (File | Page Setup).
Ludek

Problem printing with Epson 3800 and Photoshop CS5

I came across a problem trying to print with my Epson 3800 in Photoshop CS5. I recently upgraded to Photoshop CS 5 (and Lightroom 3). I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture". It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006. I can print through Photoshop CS4 as usual, but CS5 is a problem. I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
Any help will be appreciated.

If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
Doyle

Problem printing with Reader 9.4.5 and 10

Similar Messages

Maybe you are looking for