Problem removing drivers

IN MY ADD/REMOVE PROGRAM I TRY TO REMOVE THE CREATIVE WEBCAM DRIVERS AND NOTHING HAPPENS? PLEASE HELP.

Try unplugging all USB imaging devices, scanners, cameras, etc., then try uninstalling.

Similar Messages

[GeForceFX] Problem updating drivers and playback probs

I have an NVidia FX5200 personal cinema and have constantly had problems udating drivers (crashes or b&w display) - last time I tried the system crashed and no amount of fiddling would allow me to go back so I had to re-install windows and ended up with new install of XP Pro SP2 on reformatted partition - this installed its own FX5200 MSoft driver (something like 5.6) but didn't install any software or capture drivers so I re-installed the drivers from the disk - this ioverwrote with 4.n version drivers. When I tried to update to the latest drivers using MSI live update my pc crashed on start as before with a blue screen message OX0000007E and I was unable to sort this out so ended up re-installing windows AGAIN and starting from scratch once more.
This time I thought I had it sorted and gradually updated the drivers dowloading and updating each of the 7 available and this time each one seemed stable... until I reached the latest 7772 when I got the same blue screen message - fortunately this time I was able to roll back to 6681, which unless 77 is essential, I'm jappy to stick with.
However I am having problems playing avis and mpeg files direct from my hard disk - they both stop briefly, sound stutters or they jerk when playing although they play fine if I burn them to cd and play from the dvd drive.
Any ideas about why I am not able to upgrade drivers successfully and any ideas about why I'm getting playback probs? All help appreciated.
Thanks
alad
System:
AMD 2600
512 ddr ram - 768 page file
WD 120g hdd (90g free and defragged)
Using 32 inch 100htz TV as monitor directly connected to vga card
Sound Trust C-Media driver 5.12.1.639
Installed
Jet audio
Power DVD 5
(tried personal cinema prog which came with card but removed it after problems with TV capture)
Tried installing
FFDshow codecs
latest XVid codecs
Reclock
- none made any difference
Rest of OX message: (OXC0000005; OX8054AF32; OXF89893EO; OXF8989)DC)

Hi Shrek
I just listed my first post. I bought a dell Dimension XPS T500 in 999. It used a CT4780 that fed a good Altec Lansing speaker system. When I built my present budget PC I used the old CT4780 card. Because I?am using XP Pro I loaded Li'veDri'veUni-Pack.exe driver (released 280203). This worked fine.
But I do not have the SPDIF working as yet. My MSI? MS-6533XG?Motherboard does have?header pins for SPDIF but?so far I haven't used them. I am looking for drivers to use if I can get the SPDIF connected.
Do you have any info?on my needs?
Thanks
Bailsburg

Hi I am having problems removing mail from trash folder. Can anyone help please

Hi I am having problems removing mail from trash folder. I can send mails to the folder but cannot delete them permanently from the trash folder. I am using Iphone 3G and anm up to date with OS. Can anyone help please

Check that there isn't a different Trash folder to the one with the proper Trash symbol on it.
If you see one in your list of folders rather than a separate one, highlight it, then click on Mailbox...Use this mailbox for...Trash

Problem removing a Exchange Federation Trust

Hi,
I'm having a problem removing a Federation Trust. I have removed the Organisation Relationship successfully. However when I go to remove the trust by Powershell I get the following error
[PS] C:\Windows\system32>remove-federationtrust "Microsoft Federation Gateway"
Can't remove federation trust "Microsoft Federation Gateway". It's in use by the following organization(s): CN=Federation,CN=XXXXXX,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=XXXXX,DC=local
+ CategoryInfo : InvalidOperation: (Microsoft Federation Gateway:ADObjectId) [Remove-FederationTrust], Or
gsStillUsingThisTrustException
+ FullyQualifiedErrorId : A17E4A11,Microsoft.Exchange.Management.SystemConfigurationTasks.RemoveFederationTrusts
I cant seem to make other changes to it either, I cant add a domain, remove domain. I have seen references to delete the object in the Schema but dont really want to do that unless I know it wont cause other problems as I need to recreate this.
Ian

There are few things you need to make sure before you remove the federation, like permissions, TXT records etc.
http://technet.microsoft.com/en-us/library/jj657500(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/dd297972(v=exchg.141).aspx
http://www.c7solutions.com/2012/03/fix-federation-trust-issues-after-html
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Problem removing Zombie GS

Hey all. Having a problem removing Zombie Gunship from my Game Center. Basically, I want to delete my current progress and start over, thanks to my nephew messing up my config.
So, I've deleted Zombie GS and it prompts me to remove the data and that my progess will be removed from the leader boards. So I do all that, restart it, blah blah blah. After I've reinstalled the app, my old config/progress/money is still there.
I've emailed the game company and of course no response. So what am I missing or doing wrong? Or is this a situation where I can never start over?
Thanks in advance for the help.

I've got the same problem. I am revisiting the game and I want to start again from scratch but it seems Game Center has other plans for me. Dammit Apple gestapo!

Problem removing files with CVS (JDeveloper 10.1.3 Preview)

Hello,
I've got a problem removing files from CVS :
- I right-click on the file I want to remove -> Versioning -> Remove
- The file is removed from local directory, and it appears in "Pending changes" view, on "Outgoing" tab. Its status is "scheduled for removal".
- When I commit the file in the "Pending Changes" view, and click OK, then nothing happens. The file stay with "scheduled for removal" status, and it is not deleted on CVS server.
I tried to commit the package or the project, but it's the same thing.
Files additions and modifications work correctly.
I'm using JDeveloper 10.1.3 Preview version.
Is this a bug ? Or do I do something wrong ? Is there an other way to solve my problem ?
Thanks.

Here is the message displayed in the log window when I remove file (in Versioning menu) :
C:\J2EE\Projets\budgetapptest\src\test\swm>
$ <internal cvs client> remove -l Test_suppr_1.java
cvs remove: scheduling `Test_suppr_1.java' for removal
cvs remove: use 'cvs commit' to remove this file permanently
Here is the message displayed in the log window when I COMMIT the "scheduled for removal" file :
C:\J2EE\Projets\budgetapptest\src\test\swm>
$ <internal cvs client> commit -F C:\DOCUME~1\19363~1.WIN\LOCALS~1\Temp\.jdevcvs_cmt22356.tmp Test_suppr_1.java
cvs commit: Examining .
Thanks.
Message was edited by:
user444728

Problem removing focused object from a table

Hi.
I have a problem removing a component that is focused from a table. The
whole row is removed except a single component (JSpinner) in one row.
My table has three columns, the first two are String fields
(not editable) and the last is a JSpinner. Since there is no
Default cell renderer or cell editor for JSpinner I had to
create them.
So, if no element of the row is focused then calling the function:
public void clearTable() {
setVisible(false);
dataVector.removeAllElements(); // clear data vector
setVisible(true);
works just fine
but if a spinner in a row is focused them that spinner is left alone "floating" on an otherwise empty table.
Questions:
1) Any one has an ideia of what might be the problem?
2) Do I have to play with Focus to solve this? (hate the idea,
since always been told to avoid messing with focus, because
of the problems it normally brings)
Thanks in advance for the help,
Rgds,
Jorge

The problem is that you need to properly stop the editing operation first.if( myTable.isEditing() ) {
    // If you want to throw away any edits use...
    myTable.getCellEditor().cancelCellEditing();
    // If you want to apply any edits, then end use...
    myTable.getCellEditor().stopCellEditing();

Problem removing session attributes

I have a problem removing session attributes
I try w/ mysession.removeAttribute("key");
but it still lives in memory. I've tried setAttribute("key", null) as the API states that will do the same thing, but it doesn't work.
I can get mysession.invalidate() to work, but I want to keep some of the attributes there, while removing another.
I get no exceptions and no errors.
Help.
Running Tomcat 4
jre 1.3.1

Actually,
response.addHeader("Expires", "-1");should be enough.
The browser should then contact the Web server for updates to that page via a conditional If-Modified-Since request. You don't want a cache disabling 'overkill', since you'd still want the page to remain in the disk cache and used in appropriate situations without contacting the remote Web server, such as when the BACK and FORWARD buttons are pressed...
Anyway, try this first, and if it doesn't solve your problem, add the other cache-disabling headers, as outlined in the previous post.
If you're using JSP, verify also that your page has
<%@ page session="true"%>

Problem removing Listener Service in Clusterware 11g

It appears that I already have a listener service as shown below, and I am having problem removing this service so that I can create another. I know that I can just add a new listener service for each node, though if anyone would share some insight on how I can remove this listener service ofr Oracle 11g Clusterware with two node cluster, I would appreciate your insight. Thanks
rac1.respecti.com>./crs_resources.sh
HA Resource Target State
ora.rac1.gsd ONLINE ONLINE on rac1
ora.rac1.ons ONLINE ONLINE on rac1
ora.rac1.rac1.lsnr ONLINE ONLINE on rac1
ora.rac1.vip ONLINE ONLINE on rac1
ora.rac2.gsd ONLINE ONLINE on rac2
ora.rac2.ons ONLINE ONLINE on rac2
ora.rac2.rac2.lsnr ONLINE ONLINE on rac2
ora.rac2.vip ONLINE ONLINE on rac2
rac1.respecti.com>srvctl remove listener -n rac1 -l rac1
PRKO-2203 : Listener is running on node: rac1
rac1.respecti.com>srvctl stop listener -n rac1
CRS-0210: Could not find resource 'ora.rac1.LISTENER_RAC1.lsnr'.
rac1.respecti.com>

Hi, Is there any tnslsnr process running on the node. To understand the problem better, enable the debug trace for the .lsnr resource. You can enable trace by executing the following command as root.
crsctl debug log res "ora.rac1.LISTENER_RAC1.lsnr:5"
crsctl debug log crs "CRSRTI:1,CRSCOMM:2,OCRSRV:4"
Try to stop the listener.
Examine the log files under CRS_HOME/log/$HOST/crsd/* and CRS_HOME/log/$HOST/racg/*
Thanks & Regards
-Harish Kalra

I am having problem removing sim from E51

I have problems removing sim from my E51. it seems. its very tight there.

Did you already try these steps?
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
copied from iOS: Troubleshooting activation issues

Problems finding drivers for late 2008 MBP Windows xp 64

Hi,
I'm having problems installing drivers for Windows xp 64 bit pro. The main problem is that i have lost the leopard install disc that came with the mac. As far as i know the drivers located on the leopard install disc 1 are compatible with Win xp 64?
Does anybody know where i can get a complete list of all the correct drivers to download? I've been doing trial and error driver installation for about 1 week now and getting really upset that i have not been able to resolve this issue.
Any help greatly appreciated,
Thanks in advance,
Fredrik Christensen

Fredrik Christensen wrote:
Hi Stefan,
Thanks for replying.
Perhaps i am thinking of Windows Vista 64 then? I'm pretty sure that i saw a post somewhere which said that Apple released 64 bit drivers with the latest leopard install disc for the new MBP.
Fred
Hi Fred,
yes, Vista 64-bit is supported on some MAcs. See here: http://support.apple.com/kb/HT1846
Also Applee sems to have released newer versions of the retail Leopard Installation discs, which include Vista 64-bit drivers http://support.apple.com/kb/HT1999
Regards
Stefan

My HP2575 give's "Ink Cartridge Problem - Remove and check cartridge on right"-error

Hello,
I have a HP photosmart 2575 all-in-one. For just a couple of month's I use my black 339 cartridge and suddenly it give the error "Ink Cartridge Problem - Remove and check cartridge on right", with means the black cartridge. I always use original HP cartridges and have never filled them by myself or other people. Because the expire date is just a couple of weeks late, HP won't support me. For now I put a new cartridge in the printer, with works fine. How can I solve this problem with my cartridge? It has enough ink for many prints to make, so I don't like to throw that away. I hope you can help me with tis matter.
Thanks a lot.

Hello Tom_Heitbrink. I have located a document you can follow to troubleshoot your issue. Let me know your troubleshooting results after following the document. I'm only here to help!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00427221&cc=us&dlc=en&lc=en&product=441240
Mario
I worked on behalf of HP.

Having problems removing tags from script.

I'm not using the browser to run Adobe Story, but the Desktop version from my iMac. Cmd + Double Click works, but once every 30 times. Is anyone else having this problem removing tags from a script?

There are other ways to remove tags from a script
From Tagging Panel:
- Open Tagging Panel from View Menu
- Click on Edit button. Here you have the option to delete individual tag-items or remove all from the scene.
From File Menu
- Open File - Tagging menu
Here you will find the options to delete all/manually added/automatically added tags.

JMS: problem removing JMSDestination

I am having a problem removing and cleaning JMsDestination. I get an error "Error cleaning database during destination delete". Below youse the code
Any thoughts?
zbestquest
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-1999 Microsoft Corp.
D:\>cd j2sdkee1.3\bin
D:\j2sdkee1.3\bin>j2eeadmin -listJdbcDatasource
JdbcDatasource
< JDBC Resource : jdbc/Cloudscape , jdbc:cloudscape:rmi:CloudscapeDB;create=true
>
< JDBC Resource : jdbc/DB1 , jdbc:cloudscape:rmi:CloudscapeDB;create=true >
< JDBC Resource : jdbc/DB2 , jdbc:cloudscape:rmi:CloudscapeDB;create=true >
< JDBC Resource : jdbc/InventoryDB , jdbc:cloudscape:rmi:CloudscapeDB;create=tru
e >
< JDBC Resource : jdbc/EstoreDB , jdbc:cloudscape:rmi:CloudscapeDB;create=true >
D:\j2sdkee1.3\bin>j2eeadmin -listJmsDestination
JmsDestination
< JMS Destination : jms/Topic , javax.jms.Topic >
< JMS Destination : jms/Queue , javax.jms.Queue >
< JMS Destination : jms/Myqueue , javax.jms.Queue >
< JMS Destination : jms/MyQueue , javax.jms.Queue >
< JMS Destination : MyQueue , javax.jms.Queue >
D:\j2sdkee1.3\bin>j2eeadmin -removeAllJmsDestination
Error occurred: javax.jms.JMSException: Error cleaning database during destinati
on delete
D:\j2sdkee1.3\bin>j2eeadmin -removeJmsDestination jms/Queue
Error occurred: javax.jms.JMSException: Error cleaning database during destinati
on delete
D:\j2sdkee1.3\bin>j2eeadmin -removeJmsDestination MyQueue
Error occurred: javax.jms.JMSException: Error cleaning database during destinati
on delete
D:\j2sdkee1.3\bin>j2eeadmin -removeJmsDestination jms/Myqueue
Error occurred: javax.jms.JMSException: Error cleaning database during destinati
on delete
D:\j2sdkee1.3\bin>

Need help : Any JMS client I run, not able to send a message, I am suspecting there might be a problem with the JMSDestination. Any one run through this before?
I am having a problem removing and cleaning
JMsDestination. I get an error "Error cleaning
database during destination delete". Below youse the
code
Any thoughts?
zbestquest
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-1999 Microsoft Corp.
D:\>cd j2sdkee1.3\bin> D:\j2sdkee1.3\bin>j2eeadmin -listJmsDestination
JmsDestination
< JMS Destination : jms/Topic , javax.jms.Topic >
< JMS Destination : jms/Queue , javax.jms.Queue >
< JMS Destination : jms/Myqueue , javax.jms.Queue >
< JMS Destination : jms/MyQueue , javax.jms.Queue >
< JMS Destination : MyQueue , javax.jms.Queue >
D:\j2sdkee1.3\bin>j2eeadmin -removeAllJmsDestination
Error occurred: javax.jms.JMSException: Error cleaning
database during destinati
on delete
D:\j2sdkee1.3\bin>j2eeadmin -removeJmsDestination
jms/Queue
Error occurred: javax.jms.JMSException: Error cleaning
database during destinati
on delete
D:\j2sdkee1.3\bin>j2eeadmin -removeJmsDestination
MyQueue
Error occurred: javax.jms.JMSException: Error cleaning
database during destinati
on delete
D:\j2sdkee1.3\bin>j2eeadmin -removeJmsDestination
jms/Myqueue
Error occurred: javax.jms.JMSException: Error cleaning
database during destinati
on delete
D:\j2sdkee1.3\bin>

Nokia 5800 problem with drivers windows 7 32-bit

Hi, i have problem with drivers for 5800 in windows 7, all drivers except modem and cdc comms work, how can i update drivers for that, i have installed lates nokia suite 3.3 and newest cable drivers, i try drivers 6.x but then my 5800 is not recognized, what is the solution?

Hi:
You can use the W7 x64 drivers from the 250 G2 support page. They have the 32 bit driver files too.
That would be for all but the graphics if your G2 has a Pentium or Celeron processor.
If your notebook has one of those processors, then download, unzip and run the graphics driver setup exe file from the link below.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23889

Problem removing drivers

Similar Messages

Maybe you are looking for