Problem rendering

Using FCP Studio 2, my sequence settings match my video and audio settings (DV NTSC 48K) yet when I drag a clip into the timeline it tells me to render the clip (red line) yet it will not render. Any ideas?

Since we're not watching over your shoulder, there's no way for us to suggest were you look but I can tell you that each time this question has come up around here, the user eventually figures out there was a subtle difference between the clip settings and the sequence settings. Often mismatched audio sampling or improperly captured footage.
Since you appear to be a beginner with the application, I can suggest you just start over. New project with all newly captured media.
bogiesan

Similar Messages

My mac Mini has problem rendering images and video

THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!

Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty.

Having problems rendering

Hello everyone:
OK now I'm having problems rendering. I have about 6m:22sec of video that I need to render. But I get this Render Error:
Insufficient disk space. Free up space with the Render Manager and Retry?
There is no files in the Render Manager Section?
What do I do. The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Any help would be great.
This is not my day
Damon

The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Fine. But where are the Render files being written to and how much space is on that drive?
Look at your Scratch Disks setting to find out.

Mac Pro has problems rendering and RAM previewing in Adobe AE

I've been using Adobe After Effects 7 and I have a 3g new Mac Pro. It's a great computer, really fast with Final Cut Studio Universal, etc. and when rendering sequences in FCP the program doesn't quit. BUT, when I'm trying to RAM preview or render a composition in Adobe After Effects the application will quit unexpectedly everytime. I found that it would only quit when the composition was over approx. 30seconds, but I've used an eMac that never had problems rendering much longer clips. The fact that the program quits after a certain amount of time makes me think it is an issue with RAM availability to the program, as in a conflict with the program, and the new intel-based Mac Pro. I've asked around on the Adobe website but there is no specific solution. Has anyone heard talk that the intel-based Macs or new OSX, are conflicting with Adobe applications, etc?

Mostly correct, Jim. Photoshop CS3 (UB) Beta is available for download and a time-limited license to CS2 license-holders. The time-limit is unspecified, but Adobe says it will end when CS3 is released.
All good reports the last time I checked on various fora.
(CS3 install does not overwrite CS2, so in case Adobe releases CS3 and pulls the plug on those time-limited CS3 Beta licenses, you'll still have CS2 to limp along with until you receive 3.)
CS2 seems to work fine on an Intel Mac, though slower because it's running in Rosetta. Heck, I'm using CS without difficulty, other than the slowness.
However, all that doesn't help the OP with AE, which isn't scheduled for a UB release until mid-2007, IIRC.

Problems rendering Every-line Composer texts with Adobe Media Encoder

I find the text paragraph setting "Adobe Every-line Composer" a huge time saver when dealing with large amounts of text in after effects. I rarely have to do any manual tracking or line breaks to make it look good, as opposed to working with the standard Single-line Composer.
The problem is that when I render through Adobe Media Encoder (which I'm forced to do since they removed H264-mp4 support from AE:s internal renderer) the text is treated like single-line composed text. So the final render doesn't look like my AE project.
I've found two solutions to this problem:
1. Render a lossless video file in the AE renderer and then compress it with Media Encoder. This takes more time and HDD space, and it doesn't allow me to continue working in AE while rendering.
2. Only use Single-line composed text and make all adjustments manually, the old school way. This would not be a problem if I had not already used, and fallen in love with, the Every-line option.
Is there anyone that can think of a third, and preferably better, solution?
I use the CC 2014 versions of AE and AMC.

No, the text doesn't animate at all. It's just a normal static text box. The text part is extremely simple. All animations are done in other layers and pre-comps, combined with pre-rendered 3D graphics from Cinema 4D, rendered as image sequences. My problem is a bug, plain and simple. Or perhaps you could call it a "lack of feature support" or an "incompatibility between AE and Adobe Media Encoder".
My problem appears only when my AE project has text boxes with the "Every-line Composer" option enabled (press the menu button in the Paragraph window to find it), AND the project is rendered through Adobe Media Encoder, no matter which output format I use. I have no problems what so ever inside of after effects, or when rendering Single-line Composer text in AMC.
So, the problem is that Media Encoder doesn't recognize Every-line composed text. Instead it changes it to Single-line composed text, messing up text tracking and line breaks.
To clarify: the Adobe Every-line Composer is analyzing the entire text box instead of only the current line. That way it can automatically change the tracking of individual lines to better distribute the line breaks and build a better whole, avoiding those stray words on the last line for example. Extremely handy, if you could only render it.
I never wrote anything about animating text or that the codec is related to the text problems in any way. AMC is the problem. The codec is only a secondary problem since its the lack of mp4 H264 support that forces me to use Media Encoder in the first place, instead of using the AE render queue as I did in previous versions of AE. I like many things about rendering through AMC, like being able to continue working in AE while rendering, but there are still way too many glitches. And of course, there's the inability to render flv-files in AMC CC 2014, and Adobe's inability to provide a solution other than "Use an older version of AMC". Flv is their own damn format for christ's sake.
Well, enough rambling.
To put it simple:
Has anyone had a problem with "Every-line Composer" in combination with Adobe Media Encoder? Did you find a solution other than the two less-than-perfect ones in my first message?
Thanks!

Problems Rendering Jpg/Png

I'm working on a project where we have tiff images and we break them into the individual pages, then we save those pages into memory streams in order to convert them into byte arrays so we can put that in a datatable column and bind that table to a report that has a OLE blob field that renders the image.
The problem I'm have is that in less than 1% of images the report fails to render the image and throw the following error:
Error in file tempReportPath.rpt: The request could not be submitted for background processing
I have analyzed the error and it only happens when the image is saved in the memory Stream and byte array as a compressed format: JPG/PNG/ Etc. Saving the image as a bitmap does not produce this problem, but the bitmap memory footprint makes it unusable for this project.
See code below.
Public Shared Function GetPicturesBytes(ByVal FileFullName As String) As Byte()()
        If Not IO.File.Exists(FileFullName) Then Return Nothing
        Dim tiff As Image = Image.FromFile(FileFullName)
        Dim dimension As New Imaging.FrameDimension(tiff.FrameDimensionsList(0))
        Dim frames As Integer = tiff.GetFrameCount(dimension)
        Dim Result(frames - 1)() As Byte
        For index As Integer = 0 To frames - 1
            tiff.SelectActiveFrame(dimension, index)
            Dim ms As New MemoryStream()
            tiff.Save(ms, System.Drawing.Imaging.ImageFormat.Jpeg)
            Result(index) = ms.ToArray()
            ms.Dispose()
        Next
       'This way because the file remains locked until the Image is disposed!!!
        tiff.Dispose()
        Return Result
    End Function
   Private Shared Function GetImgTbl(ByVal doc As DataTable, ByVal MRN As String, ByVal patienName As String, ByVal refId As Integer) As DataTable
        Dim imgTbl As New DSDocs.DocsDataTable()
        For Each rw As DataRow In doc.Rows 'wrap.Documents.Rows
            Dim docs()() As Byte = GetPicturesBytes(docFullName)
            If IsNothing(docs) Then
                imgTbl.AddDocsRow(Nothing, (Doc not found!!!),more,Data)
                Continue For
            Else
                For index As Integer = 0 To docs.Length - 1
                    imgTbl.AddDocsRow(docs(index), other,table,data)
                Next
            End If
        Next
        Return CType(imgTbl, DataTable)
    End Function
The returned datable is used as report data source

Hi;
You don't mention which version of Crystal Reports you are using, or if you have installed the latest service packs.
We saw a similar issue recently, and our findings were:
- Crystal Reports 2008 with Service Pack 2 seems to handle images better than other versions
- Bitmap (BMP) files seem to work better than JPGs
Best Regards,
Jonathan

Problem rendering -- only part of the comp gets rendered

I'm puzzled as to why our comps are only getting the first part rendered. then it stops and the rest looks like a still image. could this be a memory issue?
We're using IMacs with Tiger.
Thank you!

It's all being done from local files, either on the hard drive or on a flash drive. no network involved.
It would seem the iMacs can't handle it for some reason. They hav 1GB RAM and the processor is wGH PPC G5
This morning i tried the same file on a different computer in the lab, (the instructor's computer) a tower, memory: 1 GB, processer: 1.8, 1.8 GHz Power PC
g5, and it works on that one.
I'm puzzled because last year with the same computers we had no problem. It was the previous version of After Effects, fwiw.
While i'm relieved to see that it could work on the instructor's computer, i'd like to know if there's anything that can be done to make the iMacs work too. are there settings i should be looking at in Preferences perhaps?
Thanks much.

Problem rendering a combo box in the data grid

Hi,
I am rendering a combo box in the data grid control using an
item renderer. When I click on it to select a value from the drop
down, the combo box immediately closes giving no time to even click
on the dropdown. This doesn’t happen every time the combo is
clicked, although it happens frequently. What I think is that the
problem arises because the data grid tries to refresh the renderers
and during this process, the existing combo is removed, thereby
getting closed automatically. Please let me know of a work around.
Thanks,
Cheree

hi hiwa,
i have to add combo box in datagrid dynamically.
it should append as and when i add the data in the above text boxes.
thanks in advance.

Resolution problems - rendering?

I'm using iMovie to cut a project. The titling and photos and I think videos are coming out really poor in terms of resolution. In the Preview when I choose which style of title, the resolution is crisp. Then I drag it in to the time line, it plays back really poorly (therefor don't think it's screen resolution).
I firewired an iMovie project from a coworker that has a new MacBook directly on to my computer. It was fine on his, then on mine, again, the resolution was horrible.
I'm not sure if a rendering setting is set to something because my last couple computers have all had poor resolution when it comes to iMovie projects. Can anyone give advice?
I just bought this computer MacBook Pro last week.

Since apparently my pictures seem to have disappeared:
zoom_400.jpeg:
zoom_600.jpeg:
So I assume it is an Acrobat problem then. Still strange though that is also appeared in the RIP (does Acrobat use the same PDF library or engine as the APPE to render PDF's)?
Thanks for the feedback BTW!

Problems rendering raw with Olympus OM-D

I love Aperture. Have been using it for years. However, I just had problems with raw files shot with my Olympus OM-D.
I recently went on a National Geographic Expedition in New York taught by Joe McNally. Fantastic experience.
The outdoor raw OM-D shots were rendered ok. The inside photos were a disaster. The camera jpg's were fine. The Lightroom conversions were better than the jpgs. But Aperture and Preview had a strong magenta cast that I could not correct for. I took them to the local Apple store and their Aperture expert had no explanation or suggestions. Any ideas?

Here is a link to the photos: http://forums.dpreview.com/forums/readflat.asp?forum=1017&thread=41792346

Problem rendering still images

I have Core i7 with GTX690. Cuda works fine... everything works fine. It renders videos very fine but when there comes a still image...Rendering stops Applications stops, my mouse pointer starts moving slow.
Then i started opening those images in photoshop and saved them again as a new jpeg images. it solved the problem for some images... but not for all.
Please somebody help.
Hassan

What are the dimensions of your sequence and the stills.
Stills need to be RGB.

Some Problems Rendering With Maya

Hi there! I had submitted a Maya job with my Qmaster and it worked fine with my sime animation sequence and putting up basic materials. Now, I have a quite complex scene and it includes materials and textures. Qmaster renders the animation sequence but it only gives me black and white outputs... the textures were not included!
What seems to be the problem?

Hi there! I had submitted a Maya job with my Qmaster
and it worked fine with my sime animation sequence
and putting up basic materials. Now, I have a quite
complex scene and it includes materials and textures.
Qmaster renders the animation sequence but it only
gives me black and white outputs... the textures were
not included!
What seems to be the problem?
Hi,
I haven't used qmaster, but i have extensive experience network rendering with maya, so here goes.
Most likely, your problem is that you are rendering across multiple machines, but the volume names are different. Your file paths must match exactly. For example, on my pc's, all of them have a y: drive. Whenever I need to network render a project, I will just use the y drive and make an exact copy of the directory on each computer. this is also the same format that the renderfarm I use. Unless you have a SAN, you will need to do something similar to this on the mac.
If you poke around, you should be able to find a log file that will show you that textures could'nt be found (missing), and in that case, the renderer render's black.
I am interested in qMaster since I have switched my studio over to mac's and need a good network renderer. If you can post your experience when you get a chance i would like to know how it works for you.
g5 Mac OS X (10.4.6)

Problems rendering Motion template

When I add a Motion template onto my timeline and edit it, it shows up fine on the canvas until I render it...then nothing, the lower 3rd or whatever I put in there just disappears from the rendered video. It is still on the timeline, but only shows up on the canvas when unrendered. What am I doing wrong?

Hi,
My problem is verrrrry similar to yours:
When I add a Motion template onto my timeline and edit it, it shows and plays fine on the canvas -UNTIL- I render it...then it look like interlaced noise?
I am running FCP STUDIO 2 on a MAC BOOK PRO using Panasonic HVX200 footage (HD 720p24) .
Have you found any fixes?

Problem rendering video

Every now and then when trying to export an MP4 movie, the rendered file is corrupt and file size is 0 KB. Sometimes when this problem occurs, but not always, I also get a warning message saying "File importer detected an inconsistency in the file structure of... Reading and writing this file's metadata (XMP) has been disabled". At first, I thought this was the reason for the problem, but since the warning message doesn't occur every time, I don't think it is. Also, If I try exporting the movie once again without making any changes, it seems to work fine. I have a fairly recent computer with Windows 7, a good amount of hard disk space and RAM memory and a Radeon HD graphics card also with a good amount of memory, so the hardware shouldn't be causing the problem, I think. Suggestions, anyone?

Over the past few weeks I have been preparing an
IMovie project using Video Clips, Photo Clips and
Title pages. I then proceeded to render my project
last night. However, after rendering the project,
the Photos are fine, but the Video Clips and Title
pages are now no longer there. I am still new at
using IMovie, so I do not know what I have done
wrong.
Thanks
Andy
Your problem may be, that you may have forgotten to save your program when you closed it. You may have also forgotten to save the program from time to time while you were working on it. Is this what happened? iMovie suggests that you do frequent saves to your program while you are working on it. I had the same problems until I started saving my projects about every five minutes. When you are working on your project, do you still have your camcorder hooked up to your computer? It might help to disconnect it until after you have finished editing and creating your project, and it is saved and burned to a DVD, or placed in a backup area, preferably an external harddrive or, other system backup device.
Froglips

Problem rendering IBM date component JSF

Hi All,
First of all i would like to thank you all for your previous valuable suggestions. Currently iam working on a JSF page in which i need to use a Date picker component of IBM.
I used the following code snippet
<%@taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx"%>
<body>
<hx:scriptCollector id="scriptCollector1">
<h:form id="propertyForm" styleClass="content">
<h:inputText id="completionDate" size="14" value="#{propertyCoverageABean.propertyCoverageView.completionDate}" rendered="#{(sessionState.currentPolicy.newBusiness || sessionState.currentPolicy.endorsement) && (propertyCoverageABean.propertyCoverageView.typeOfConstructionProject eq 'REM')}" styleClass="inputText">
<f:convertDateTime type="date" pattern="MM/dd/yyyy" />
<hx:inputHelperDatePicker rendered="true" />
<hx:inputHelperAssist autoTab="true" inputAssist="true" />
</h:inputText>
The problem is , date picker symbol is not getting displayed on my page for the first time. If the refresh the page, date picker symbol comes up.
Any help will be highly appreciated.
Thanks
Krishna

Did you found a solution to the problem?
I am having similar problem in my page.
Thanks,
Bablu

Problem rendering Motion 2 project in FCP 5.0.2

I have mutliple projects done in Motion 2, imported into FCP 5.0.2 timelines.
All projects are in NTSC DV, 720x480 format.
I am having a problem with rendering in FCP. I have one project that is a mostly static screen with one animated element, which renders fine except that it imports shifted a few pixels to the left. It's not just as simple as "move the imported file to the right to fix it", because it is actually rendering as if the entire screen in Motion were shifted over, so things at the left edge in Motion are actually cropped out in FCP.
Also, I have a problem in other where some (but not all) photos that I have cropped and scaled show up scaled and cropped completely differently in FCP (some even randomly change their scaling and cropping randomly in the middle of a move, even though in the Motion project they did not change.
So...any suggestions? I am not in charge of purchasing so I don't have the immediate option of upgrading, so I am hoping that is not the only way to fix this.
I could render out all my motion projects, but they all have transparency that is meant to layer of video in FCP and I'm not sure the best way to export (with alpha channels?). I could also redo my entire project in Motion, but I'm a week from my deadline and I need to sleep some time
Thank you for any help.

Try upgrading your system to 5.0.4.. it fixed a lot of bugs.
Jerry

Problem rendering

Similar Messages

Maybe you are looking for