Problem: Run Time Evaluation for Future Period
Hi SAP Gurus, can someone help me solving this problem:
My client need to run time evaluation for 2-months period ahead of time. But every time I tried, time evaluation always stops at end of the current month, no further dates in the future. I had created attendance data 2002 for all the future dates. IT7, 2002, 2006 and all configurations seem to be OK (T510S,T569R). Test run is also OK with good future results. What could possibly be missing? Thank you in advance.
Bill
Thank you very much, Arun, Banu, Stefan and Om.
Yes, I have entered the "Evaluation up to" date (60 days later);
The schema has a function "Check FUT".
Test future run result was generated correctly.
Still I can't have future results in real run.
So, what else I should check into?
Thanks again.
Bill
Similar Messages
-
Unable to run time evaluation for the entire year...
hi experts,
I'am unable to run time evaluation for the entire year, even though mentioned the date as Force calculation as of : 01.01.2010
and evaluation upto date : 31.12.2010. when time evaluation is run , the log is only run for Jan 2010.
Maintained IT2011 from 01.01.2010 to 31.12.2010
IT0050 from 01.01.2010 to 31.12.9999
IT0003 : PDC recalculation : 01.01.2010
Kindly advise.
Regards
PammiCheck if Time Management status is 1 or 9....
If it is 1 then it would not run for the entire year..It would run only till today. If it is 9, then the TE runs for future also...also check if in the schema it is activated for future runs or not... -
Time Card entry for future period
Hi ,
We want to enter time cards for future period ,like now we're in jun and we want to enter time cards till sep 2012 but the self service screen allowing me to enter till aug 2012 only. Can any one explain me what could be the reason. anything we need to enable for this? please advise. Thanks
Regs
RGYes it is possible , but it is not advisable in production system.
Open ur time schema using PE01 and comment the line
ACTIO TD10 End if daily WS still active
Then the sys will allow u to run time eval for future period -
Depreciation error - Unplanned posting run allow for future period
Dear ,
Need urgent advice for depreciation error happen in our production system.
FYI, our fiscal year variant 2013 = Feb 2012 - Jan 2013 ( We are now at month-end close for Pr 1 2013 ).And fiscal year close 2012 AJAB and Carry forward ARJW have successfully run for new FY 2013.
In short, in our asset accounting user was accidentally run unplannned depreciation for future period 12/2013 of one particular asset, while we are now in Pr 1/2013. And, Pr12/2013 is open for asset posting.However, no FI posting posted into the system.
Just a curiosity as to why system allow user to run unplanned depreciation for future posting without giving an error message to follow the posting cycle.
The impact/error of above unplanned depreciation run:
User is not allowed to execute AFAB depreciation run for Pr 1/2013. Even worst, in the AFAB program shows from Pr 1/2013 - 12/2013 is already posted when we do depreciation test run. We can't perform any planned,repeat,restart for Pr1/2013.
Because of only one asset had accidentally run for Pr12/2013, all of our asset (96,773 asset) cannot proceed with depreciation run for Pr 1/2013 in the new fiscal year.
This is high priority as it will impact the entire depreciation run for 12 month of our company.
Your early reply on this issue is greatly appreciated.
Thank you,
Regards,
LatifahThank you for the response.
FYI, the asset posting actually has been executed but no document was posted as there's no value.
I've check the 2 tables below:
ANLC - No numbers of run for any period in FY2013
ANLP - No depreciation run was posted in FY13 (all periods).
Is there anyway for us to do normal planned run for Pr 1/2013? As i understand SAP has no function to perform reversal depreciation run in AFAB. How
With regard to the posting period 12/2013 that is open for user, I already highlighted this to the respective custodian.
Thanks. -
Posting run for future period requested (check entry)
Hi,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
I checked in OB52 postings periods are open for 2009(all periods)
SAP note 1150235 (all corrections) and 1153718 are completely implemented.
Still the problem is not resolved.
Regards,
SankarHi Sankar,
I would like to refer you to the already implemented note 1153718 which states :
After you implement the changes, the system issues error message AA 697
"Posting run for future period requested (check entry)" immediately when
you use a fiscal year that is in the future. In principle, you can
customize this message. However, in this case, no settings are taken
into account; the system always issues an error message.
Regards Bernhard -
Can't Run AFAB - Posting run requested for future period
Hi,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
Diagnosis
There was a check of your entries in the company code and posting period fields for the current system date. The result of this check is that you requested a posting run for company code xxxx for a future fiscal period.
Please help me, cause I must close the period.
ThanksHi
Check Table TABA, whats your last posted period for depreciation
If you are executing depreciation for last period + 1, then this error is not justified
If you are doing it for last period + 2, then its justified
Br, Ajay M -
Posting run for future period requested
Dear Team,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
please help to reslove the issue.
Regards,
MAhendraHi,
look into the Threads,
Can't Run AFAB - Posting run requested for future period
Regards
Andi -
Posting run request for future period; check your entry message no.AA697
Hello Guru's,
I have below error while Depreciation run in T.Code AFAB
"Posting run requested for future period; check your entry" message no.AA697
Request help
thanks in advance
Regards
ChintamaniHello Chintamani,
Why you want to post the depreciation for future period?
Is the future fiscal year in open or is the posting period open for that? If no, please open that period with AJRW T code if you want to post the depreciation for future period but it is not recommendable.
Check the posting period once again because the given posting period belongs to future year? So please do re-chk and give correct period according to your current fiscal year.
You can get your fiscal year details and assignment of fiscal year variant to the co,code details in OB29 and OB37 t codes respectfully.
Check the OSS Note: 1150235 - Preventing depreciation posting run for future
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S -
No entry in table T001P for key when running time evaluation
Hi There,
All the master data is in synch and I am getting this error when
running time evaluation.
*No entry in table T001P for key
Person rejected: xxxxxxxx*
Apparantly this seems to be config error but we have lot of EEs like this, working okay. All the master data dates are correct.
Any comment/help is greatly appreciated.
Thanks,
GajananHi,
In one of the thread i have read that, after maintaining Contract Type the issue has been resolved.
and in other thread he says
"the issue is caused by a mismatch in the employee's master data dates. Particularly with infotype 8, the first record of his basic pay had a date prior to his hire date"
Can you please check it once.
Good Luck..!
KK -
Clock In Clock Out Report without running Time Evaluation
Hi Every1
Is it possible to get report on clock in clock out without running time evaluation?? Can we get a report on Time events after uploading Punch in punch out from other system thru BDC?
Here requirement is as soon as punch in punch out is uploaded on daily basis thru BDC they shud get a report on Clock In from th system so that they can immediately find out in morning shift how many employees are present.
Thanks & Regards
NehaWell what tables are you uploading in the BDC ?? are the PTX tables being uploaded or the PA2011 Tables uploaded ?
If the PA2011 Tables are uploaded then yes we can run a report for each day as required but if the PTX tables are updated then they are either waiting for managers approval or to be transfered to HR which triggers updation of the Infotypes accordingly.
And when you transfer to HR i guess Infotype 2011 is not updated but rather 2001 and 2002 Tables are updated but have to check on this, time eval schema would not update 2011 Infotype but rather would update ZL tables with time types if present, try to figure out what table the BDC updates each night.
Edited by: insane saint on Jul 14, 2009 10:38 PM -
Getting run time error for multiple counter plan
Hi Friends,
Its very critical issue,wherein i am getting run time error for multiple counter plan.
Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
Please find the screen shots for your reference and please let me know how to fix the issue.
Regards,
SrinikaHi,
Please check reason for update termination in Transaction code SM13. -
Error when running time evaluation
Hi,
When I am running time evaluation I got this error "start of pair formation changed from 20040101 to 20081212"
I am using TM01 schema. Please help me out with this error.
Thank you
ShravanHi Shravan,
Please check infotype 0007 if the work schedule has changed fron 01/01/2004.
Also please check the generated workschedule used for that employee , if the config has changed and that work schedule has been re- generated with a different DWS.
Thanks. -
Depreciation for future period
Hi Guru's,
Could anyone tell me how we can get dep report for future period is there any standard report in sap or what is the option.
Thanks
RaviHi Ravi,
You can use the below Standard Report Provided by SAP for Depreciation Simulation for future period.
S_ALR_87012936 - Depreciation on Capitalized Assets (Depreciation Simulation)
While executing the report specify the future report date to view the deprecaition amount of future periods.
Hope the above helps.
Regards
Nitin -
Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:nullThamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null -
Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD
Maybe you are looking for
-
I can't drag and drop or cut and paste all of a sudden! Help
I can't drap and drop or cut and paste all of a sudden. I updated my windows suite and ditched the old stuff. The next day no drag, drop, cut and paste. <Email Edited By Host>
-
I have a new iPad mini and my contacts are synching with each others information and pictures
I am trying to set up a new iPad. My contacts from Facebook are putting wrong picture and combining names
-
How to use the java class created by "CONTIVO" as web sevrvice?
Hi All, We are creating the java class by the Contivo mapping tool, how to use that class as a web serivce? Very thankful if anyone gives some light on this. Thanks in advance..... rgds, Rajeev Pariyadathu
-
Extension for Oracle Standard Packages
Hello Dear, I just want to know in Standard packages I want to use Extensions , using any setup or changes can we retrieve them getting over ridden when we apply patches to oracle EBS 11i or R12. Thanks, Lu
-
HT2905 Delete duplicate songs with exact same date
If all instances of given song have exact same date, will the procedure recommended in Support page "How to find and remove duplicate items in your iTunes library" (http://support.apple.com/kb/HT2905) delete all instances, or all but one instance? If