Problem setting up crontab for cyrusimap

Greetings all.
I've just finished setting up OS X Server 10.4.10 on an intel mac, and was trying to setup a crontab for cyrusimap to make sure that all mail for JUNKMAIL and NOTJUNKMAIL users is deleted automatically using ipurge.
I created the following crontab file:
<pre>
0 0 */0 * * /usr/bin/cyrus/bin/cyrus-quota -q
30 1 * * * /usr/bin/cyrus/bin/ipurge -f -d 1 user/junkmail user/notjunkmail
</pre>
And then tried loading it in via:
<pre>
sudo crontab -u cyrusimap <PATHTOCRONTAB>
</pre>
However crontab just hangs hogging 90%+ of the CPU!? The permissions in /var/cron/tabs seem ok, with full read/write for root.
Any ideas? Thanks in advance,
Mezza

Mezza,
cron is not used by default in OS X although it is certainly supported.
See http://www.afp548.com/article.php?story=20050620071558293
Since you did not explicitly state the "path to crontab"
I wonder if you might be trying to run root's crontab as user cyrusimap, which of course won't work. See the crontab manpage for a possible exception although I wouldn't recommend it.
The crontab file for cyrusimap is empty by default in 10.4 server

Similar Messages

  • Problem setting initial value for LOV

    Hello, everyone. This seems like it should be simple, but it's giving me lots of problems. I am trying to create my first LOV. I have a messageLovInput item called PFedFilingStatus. From the Property Inspector, I can set an Initial Value of "02", which displays when I run the page, and lets me change it and validate it using the associated LOV.
    What I would rather do is set the initial value programmatically, but here are my problems:
    If I set the value like this:
    OAMessageLovInputBean lovText = (OAMessageLovInputBean)pageLayout.findIndexedChildRecursive("PFedFilingStatus");
    lovText.setText("02");
    then the field displays properly at run time, but can't be changed. The LOV runs, but any value I select flips back to "02"
    If I set the value like this:
    lovText.setDefaultValue("02");
    then nothing seems to happen at run time. The value is not displayed at all.
    Can anyone tell me what I am doing wrong? Thanks for your help.
    --Dave                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Yes, that helps a bunch. Now can you tell me where that is set?
    Thanks so much.
    --Dave                                                                                                                                                                                       

  • Problems setting up iReport for SLM development

    Hi!
    I've been trying to set up Eclipse and iReport so that I can create
    some custom reports for SLM, but this has proven difficult. I'll explain
    what I've done and where it fails:
    1) I've followed all instructions on this page:
    'Sentinel Development Environment'
    (http://www.novell.com/developer/sent...vironment.html)
    I get the following error in step 4 in the section entitled
    "Enabling Previewing
    Reports That Query The Sentinel Log Manager Event Store"
    Exception in thread "main" 05.jan.2011 14:37:12
    esecurity.base.error.SentinelErrorCodes <clinit>
    INFO: There are 71 defined error codes.
    esecurity.base.exceptions.RemoteException:
    at
    esecurity.db.object.IndexedLogSearchServiceRemoteI mpl.startSearch(Ind
    exedLogSearchServiceRemoteImpl.java:54)
    at
    com.novell.reports.jasper.data.event.EventDataSour ce.nextEvent(EventD
    ataSource.java:156)
    at
    com.novell.reports.jasper.data.event.EventDataSour ce.next(EventDataSo
    urce.java:145)
    at
    com.novell.reports.jasper.data.event.ConnectionChe ck.main(ConnectionC
    heck.java:66)
    Caused by: esecurity.base.exceptions.RemoteException:
    at
    esecurity.base.datamodel.method.MethodResult.setEx ception(MethodResul
    t.java:55)
    at
    esecurity.base.ccs.comp.BaseRemoteObjectTask.execu te(BaseRemoteObject
    Task.java:120)
    at
    esecurity.base.ccs.comp.GenericRemoteObjectTask.pr ocessRequest(Generi
    cRemoteObjectTask.java:86)
    at
    esecurity.base.ccs.comp.GenericTask.process(Generi cTask.java:91)
    at
    esecurity.base.ccs.comp.GenericTask.process(Generi cTask.java:65)
    at esecurity.base.ccs.comp.BaseTask.run(BaseTask.java :52)
    at
    esecurity.base.ccs.comp.threadpool.TaskThreadPool$ RunWrapper.run(Task
    ThreadPool.java:89)
    at
    EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Wo rker.run(PooledExec
    utor.java:732)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.
    java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at
    esecurity.base.ccs.comp.BaseRemoteObjectTask.execu te(BaseRemoteObject
    Task.java:113)
    ... 7 more
    Caused by: java.lang.RuntimeException: No param auditInfo for method id
    = _start
    Search_,name = startSearch
    param=startTime, type=java.util.Date, value=nullparam=limit, type=long,
    value=1p
    aram=sortFields, type=java.util.List, value=nullparam=searchString,
    type=String,
    value=sev:[9 TO 9] MAXCOUNT=1param=pageSize, type=integer,
    value=10000param=end
    Time, type=java.util.Date, value=nullparam=user, type=String,
    value=admin
    at
    esecurity.base.datamodel.method.ObjMethod.getParam (ObjMethod.java:250
    at
    esecurity.base.datamodel.method.ObjMethod.getDataO bjectValue(ObjMetho
    d.java:107)
    at
    esecurity.db.object.IndexedLogSearchServiceServerS tub._startSearch_(I
    ndexedLogSearchServiceServerStub.java:66)
    ... 12 more
    I noticed another thread on this error, but as you can see from the
    configuration.xml file I am using the system user so rights shouldn't be
    the cause here:
    <strategy active="yes" id="sentinel_client"
    location="com.esecurity.common.communication.strat egy.jmsstrategy.activemq.ActiveMQStrategyFactory"
    name="ActiveMQ">
    <jms
    brokerURL="ssl://x.x.x.x:61616??wireFormat.maxInactivityDuration=0"
    interceptors="compression"
    keystore="C:\\Users\\ragsto\\Development\\Sentinel
    SDK\\content\\dev\\sdk\\build\\config\\.activemqcl ientkeystore.jks"
    keystorePassword="password" password="832f515a51412dec5ec22dfa756693ab"
    username="system"/>
    </strategy>
    I decided test the reports even with this error, but whenever I open a
    TemplateReport.jrxml I immediately get the following error:
    net.sf.jasperreports.engine.JRRuntimeException:
    net.sf.jasperreports.engine.JRException: Class
    com.novell.reports.jasper.data.event.LuceneEventQu eryExecutorFactory not
    found.
    In the DOS window where I started iReport from, I get the following
    error:
    Can't find the translation for key =
    gui.elementpropertiessheet.sheetProperty.re
    nderType: using default (Render type)
    Can't find the translation for key =
    gui.elementpropertiessheet.sheetProperty.re
    nderType: using default (Render type)
    End event threw exception
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknow n Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Un known
    Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at
    org.apache.commons.beanutils.MethodUtils.invokeMet hod(MethodUtils.jav
    a:216)
    at
    org.apache.commons.digester.SetNextRule.end(SetNex tRule.java:216)
    at org.apache.commons.digester.Rule.end(Rule.java:230 )
    at
    org.apache.commons.digester.Digester.endElement(Di gester.java:1130)
    at
    it.businesslogic.ireport.compiler.xml.SourceTraceD igester.endElement(
    SourceTraceDigester.java:159)
    at
    org.apache.xerces.parsers.AbstractSAXParser.endEle ment(Unknown Source
    at
    org.apache.xerces.impl.dtd.XMLDTDValidator.endName spaceScope(Unknown
    Source)
    at
    org.apache.xerces.impl.dtd.XMLDTDValidator.handleE ndElement(Unknown S
    ource)
    at
    org.apache.xerces.impl.dtd.XMLDTDValidator.endElem ent(Unknown Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerI mpl.scanEndElement(
    Unknown Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerI mpl$FragmentContent
    Dispatcher.dispatch(Unknown Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerI mpl.scanDocument(Un
    known Source)
    at org.apache.xerces.parsers.XML11Configuration.parse (Unknown
    Source)
    at org.apache.xerces.parsers.XML11Configuration.parse (Unknown
    Source)
    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    at org.apache.xerces.parsers.AbstractSAXParser.parse( Unknown
    Source)
    at
    org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser .parse(Unknown Sour
    ce)
    at
    org.apache.commons.digester.Digester.parse(Digeste r.java:1647)
    at
    net.sf.jasperreports.engine.xml.JRXmlLoader.loadXM L(JRXmlLoader.java:
    239)
    at
    net.sf.jasperreports.engine.xml.JRXmlLoader.loadXM L(JRXmlLoader.java:
    226)
    at
    it.businesslogic.ireport.IReportCompiler.loadJaspe rDesign(IReportComp
    iler.java:2125)
    at
    it.businesslogic.ireport.DesignVerifyerThread.veri fyDesign(DesignVeri
    fyerThread.java:145)
    at
    it.businesslogic.ireport.DesignVerifyerThread.run( DesignVerifyerThrea
    d.java:92)
    at java.lang.Thread.run(Unknown Source)
    Caused by: net.sf.jasperreports.engine.JRRuntimeException:
    net.sf.jasperreports.
    engine.JRException: Class
    com.novell.reports.jasper.data.event.LuceneEventQu eryE
    xecutorFactory not found.
    at
    net.sf.jasperreports.engine.design.JRDesignDataset .queryLanguageChang
    ed(JRDesignDataset.java:914)
    at
    net.sf.jasperreports.engine.design.JRDesignDataset .setQuery(JRDesignD
    ataset.java:448)
    at
    net.sf.jasperreports.engine.design.JasperDesign.se tQuery(JasperDesign
    .java:806)
    ... 28 more
    Caused by: net.sf.jasperreports.engine.JRException: Class
    com.novell.reports.jas
    per.data.event.LuceneEventQueryExecutorFactory not found.
    at
    net.sf.jasperreports.engine.util.JRSingletonCache. createInstance(JRSi
    ngletonCache.java:98)
    at
    net.sf.jasperreports.engine.util.JRSingletonCache. getCachedInstance(J
    RSingletonCache.java:78)
    at
    net.sf.jasperreports.engine.util.JRQueryExecuterUt ils.getQueryExecute
    rFactory(JRQueryExecuterUtils.java:60)
    at
    net.sf.jasperreports.engine.design.JRDesignDataset .queryLanguageChang
    ed(JRDesignDataset.java:903)
    ... 30 more
    Caused by: java.lang.ClassNotFoundException:
    com.novell.reports.jasper.data.even
    t.LuceneEventQueryExecutorFactory
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at
    net.sf.jasperreports.engine.util.JRClassLoader.loa dClassForRealName(J
    RClassLoader.java:179)
    at
    net.sf.jasperreports.engine.util.JRClassLoader.loa dClassForName(JRCla
    ssLoader.java:119)
    at
    net.sf.jasperreports.engine.util.JRSingletonCache. createInstance(JRSi
    ngletonCache.java:88)
    ... 33 more
    locationFileName does not exisit
    It looks to me like there's a problem with the Lucene connection, but
    the connection test works..?
    When I try to compile the report, I get the following errors:
    The method DatePrepare(String, String, String) is undefined for the
    type TemplateReportScriptlet
    The method DatePrepare(String, String, String) is undefined for the
    type TemplateReportScriptlet
    The method getKeyColors() is undefined for the type
    TemplateReportScriptlet
    The method getKeyColors() is undefined for the type
    TemplateReportScriptlet
    The method DatePrepare(String, String, String) is undefined for the
    type TemplateReportScriptlet
    This is similar to another users error, but I wasn't able to solve my
    problem by compiling in iReport 3.7.6 - I just get different errors.
    Since I am not very familiar with Java, I have no idea on how to
    troubleshoot this. Can anyone assist, please?
    Ragnar Storstrm
    rstorstrom
    rstorstrom's Profile: http://forums.novell.com/member.php?userid=5064
    View this thread: http://forums.novell.com/showthread.php?t=429304

    That fixed the problem with the connection check - thank you! But I
    still have two problems left:
    1) When I create a new report in Eclipse and try to compile it in
    iReport I get the following error:
    Compiling to file... C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\TemplateReport.jasper ->
    C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\TemplateReport.java
    net.sf.jasperreports.engine.design.J...va.lang.ClassNotFoundException:*TemplateReportClass
    Line:*21,*Column:*36*JRXML*Element:*/jasperReport
    Exception*in*thread*"AWT-EventQueue-0"*java.lang.ArrayIndexOutOfBoundsException:*2*>=* 2
    ****at*java.util.Vector.elementAt(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI.ge tTextViewForTab(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI.ca lculateTabHeight(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI.ca lculateMaxTabHeight(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI$Ta bbedPaneLayout.calculateTabRects(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI$Ta bbedPaneLayout.calculateLayoutInfo(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI$Ta bbedPaneLayout.layoutContainer(Unknown*Source)
    ****at*java.awt.Container.layout(Unknown*Source)
    ****at*java.awt.Container.doLayout(Unknown*Source)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validate(Unknown*Source)
    ****at*javax.swing.RepaintManager.validateInvalidC omponents(Unknown*Source)
    ****at*javax.swing.SystemEventQueueUtilities$Compo nentWorkRequest.run(Unknown*Source)
    ****at*java.awt.event.InvocationEvent.dispatch(Unk nown*Source)
    ****at*java.awt.EventQueue.dispatchEvent(Unknown*S ource)
    ****at*java.awt.EventDispatchThread.pumpOneEventFo rFilters(Unknown*Source)
    ****at*java.awt.EventDispatchThread.pumpEventsForF ilter(Unknown*Source)
    ****at*java.awt.EventDispatchThread.pumpEventsForH ierarchy(Unknown*Source)
    ****at*java.awt.EventDispatchThread.pumpEvents(Unk nown*Source)
    ****at*java.awt.EventDispatchThread.pumpEvents(Unk nown*Source)
    ****at*java.awt.EventDispatchThread.run(Unknown*So urce)
    Exception*in*thread*"AWT-EventQueue-0"*java.lang.ArrayIndexOutOfBoundsException:*2*>=* 2
    ****at*java.util.Vector.elementAt(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI.ge tTextViewForTab(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI.ca lculateTabHeight(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI.ca lculateMaxTabHeight(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI$Ta bbedPaneLayout.calculateTabRects(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI$Ta bbedPaneLayout.calculateLayoutInfo(Unknown*Source)
    ****at*javax.swing.plaf.basic.BasicTabbedPaneUI$Ta bbedPaneLayout.layoutContainer(Unknown*Source)
    ****at*java.awt.Container.layout(Unknown*Source)
    ****at*java.awt.Container.doLayout(Unknown*Source)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validateTree(Unknown*Sou rce)
    ****at*java.awt.Container.validate(Unknown*Source)
    ****at*javax.swing.RepaintManager.validateInvalidC omponents(Unknown*Source)
    ****at*javax.swing.SystemEventQueueUtilities$Compo nentWorkRequest.run(Unknown*Source)
    ****at*java.awt.event.InvocationEvent.dispatch(Unk nown*Source)
    ****at*java.awt.EventQueue.dispatchEvent(Unknown*S ource)
    ****at*java.awt.EventDispatchThread.pumpOneEventFo rFilters(Unknown*Source)
    ****at*java.awt.EventDispatchThread.pumpEventsForF ilter(Unknown*Source)
    ****at*java.awt.EventDispatchThread.pumpEventsForH ierarchy(Unknown*Source)
    ****at*java.awt.EventDispatchThread.pumpEvents(Unk nown*Source)
    ****at*java.awt.EventDispatchThread.pumpEvents(Unk nown*Source)
    ****at*java.awt.EventDispatchThread.run(Unknown*So urce)
    net.sf.jasperreports.engine.design.JRValidationExc eption:*Report*design*not*valid*:*
    *****1.*java.lang.ClassNotFoundException:*Template ReportClass
    ****at*net.sf.jasperreports.engine.design.JRAbstra ctCompiler.verifyDesign(JRAbstractCompiler.java:26 0)
    ****at*net.sf.jasperreports.engine.design.JRAbstra ctCompiler.compileReport(JRAbstractCompiler.java:1 44)
    ****at*it.businesslogic.ireport.IReportCompiler.ru n(IReportCompiler.java:591)
    ****at*java.lang.Thread.run(Unknown*Source)
    In Ant I see the following:
    Buildfile: C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\build.xml
    _checkrelease:
    [echo]
    [echo] The current release of this plug-in is version:
    [echo] "1" --> (Testing Test av rapportlaging_6.1r1)
    [echo] Do you want to increment the release number and create a
    new release?
    _newrelease:
    _init:
    [echo] Author information loaded from
    C:\proj\content/dev/dev.properties
    _typeInit:
    scrub:
    build-release:
    _build-checks:
    _init:
    [echo] Author information loaded from
    C:\proj\content/dev/dev.properties
    _typeInit:
    build-zip:
    [delete] Deleting directory
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1
    _copy-plugin:
    [copy] Copying 1 file to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [copy] Copying 1 file to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\tmp
    [copy] Copying 9 files to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [copy] Copying 6 files to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [copy] Copying 2 files to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [copy] Copying 1 file to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [copy] Copying 1 file to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [move] Moving 1 file to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [javac] Compiling 1 source file to
    C:\proj\content\build\Testing_Test-av-rapportlaging_6.1r1\plugin
    [javac] C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\TemplateReportScriptlet.java:4: package
    it.businesslogic.ireport does not exist
    [javac] public class TemplateReportScriptlet extends
    it.businesslogic.ireport.IReportScriptlet {
    [javac]
    ^
    [javac] C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\TemplateReportScriptlet.java:24: cannot find symbol
    [javac] symbol : variable super
    [javac] location: class TemplateReportScriptlet
    [javac] super.beforeColumnInit();
    [javac] ^
    [javac] C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\TemplateReportScriptlet.java:30: cannot find symbol
    [javac] symbol : variable super
    [javac] location: class TemplateReportScriptlet
    [javac] super.afterDetailEval();
    [javac] ^
    [javac] C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\TemplateReportScriptlet.java:36: cannot find symbol
    [javac] symbol : variable super
    [javac] location: class TemplateReportScriptlet
    [javac] super.afterGroupInit(groupName);
    [javac] ^
    [javac] C:\proj\content\dev\reports\Testing\Test av
    rapportlaging\6.1\TemplateReportScriptlet.java:42: cannot find symbol
    [javac] symbol : variable super
    [javac] location: class TemplateReportScriptlet
    [javac] super.afterPageInit();
    [javac] ^
    [javac] 5 errors
    As I recall, I can fix this by adding the right .JAR file to the dev
    directory of the report, so it's not a huge problem.
    2) When I try to preview a report with an active connection I get the
    following error:
    net.sf.jasperreports.engine.JRRuntimeException:
    net.sf.jasperreports.engine.JRException: Class
    com.novell.jasper.data.event.LuceneEventQueryExecu torFactory not found
    This is something I haven't found a fix for, unfortunately. Any ideas?
    PS:
    My apologies for the late reply - I was on holiday last week and was
    swamped both before going and once I got back.
    Ragnar Storstrm
    rstorstrom
    rstorstrom's Profile: http://forums.novell.com/member.php?userid=5064
    View this thread: http://forums.novell.com/showthread.php?t=429304

  • Problem setting up DSN for 10g ODBC driver

    Hello,
    I am simply trying to install an ODBC driver for 10g. To accomplish this, I first downloaded the odbc driver for 10g 10.2.0.2.0. The Readme notes said that I need to install the odbc driver using the Oracle Universal Installer. So I got a copy of just the OUI from our DBA. I installed the OUI 10.2. Using the installer, I installed the 10.2.0.2.0 odbc driver. The Readme notes said to look for the file "products.jar", which was not available, but "products.xml" was, so I used "products.xml", and the driver installed successfully.
    The next step was to set up an ODBC DSN for this driver. When I attempted to do this, the Microsoft ODBC Administrator threw this message: The setup routines for the Oracle in DEFAULT_HOME ODBC driver could not be loaded due to system error code 127, followed by Could not load the setup of translator library.
    Other threads suggested that I copy the DLLs mfc71.dll, msvcrt.dll, and msvcr71.dll from my C:\Windows\System32 directory to the directory where I installed the odbc driver (C:\orant\BIN) and to ensure that this directory path was defined under the PATH environmental variable. I followed all these instructions but to no avail - I am still having the same problem. PLEASE HELP!!! Thanks in advance!!

    Hi,
    >>could not be loaded due to system error code 127
    Did you try install it on other machine ? Maybe this current machine has a DLL versions problems ...
    Cheers

  • Problem setting up handlers for Jetty web app

    Hello,
    I am encountering a problem with setting up the handlers for my web application, what I want is : Having some requests handled by an HTTPServlet with doGet and doPost methods ( how can I load JSP pages from within these methods ? ) and also be able to load static content ( html, JS, CSS )
    The way I'm setting it right now, I can only have one or the other, I cannot get both working.
    I will explain :
        Server server = new Server(5000);
       // This is the resource handler for JS & CSS
        ResourceHandler resourceHandler = new ResourceHandler();
        resourceHandler.setResourceBase(".");
        resourceHandler.setDirectoriesListed(false);
       // This is the context handler for the HTTPServlet
        ServletContextHandler context = new ServletContextHandler(ServletContextHandler.SESSIONS);
        context.setContextPath("/");
        context.addServlet(new ServletHolder(new Main()),"/*");
       // this is the Handler list for both handlers
        HandlerList handlerList = new HandlerList();
        handlerList.setHandlers(new Handler[] { context ,resourceHandler});
         If I add them in this order, all requests will be handled by the "context" and no static resource is loaded
         If I invert the order, the index page page is loaded by the resource handler, which means, If I activate directory listings, it gives me a list of all directories, otherwise it's just a blank page
         I tried working with a WebAppContext to load JSP pages but I still had some problems with which handler should handle which requests
        server.setHandler(handlerList);
        server.start();
        server.join();
    Thank you

    Lync web app is designed mainly for external partners who are invited to Lync meetings. Thus, the feature cannot be achieved naturally on Lync side. You may post the issue on IIS forum to verify if this can be achieved by setting LWA directory.
    Thank you for your understanding.
    http://forums.iis.net/
    Kent Huang
    TechNet Community Support

  • Problem setting VI_ATTR_SUPPRESS_END_EN Attribute for my TCPIP MBSession

    Hello,
    im using the NI-VISA for c#.
    I have to set the VI_ATTR_SUPPRESS_END_EN Attribute to false in order to get my query with an instrument working.
    I have already checked it with MAX and its working perfectly. In MAX there is a checkbox on the VISA test panel to change this property.
    Unfortunately i can't find a "VI_ATTR_SUPPRESS_END_EN" property of my TCPIP MBSession Object in my Visual Studio - C#.
    There are lots of properties but this one is missing!!! :-(
    Why is it missing? What else can i do to set this attribute?
    Thanks in advance!

    After a little more digging, I noticed that there are some public methods on Session to directly access VISA attributes. The tricky part is that they are decorated with the [EditorBrowsableAttribute(EditorBrowsableState.Never)] attribute, which hides them from Visual Studio Intellisense. This solved my problem:
    session.SetAttributeBoolean(AttributeType.SuppresEndEn, false);
    where session is a MessageBasedSession object
    Thanks,
    James

  • Problem setting different width for images using HorizontalList tag

    Hi,<br />I succeeded using HorizontalList in my AdvancedDataGrid,<br /><br />  <mx:groupedColumns><br />...<br />...<br />  </mx:groupedColumns>  <br />  <mx:rendererProviders>            <br />        <mx:AdvancedDataGridRendererProvider   <br />            dataField="Actual" <br />            renderer="ChartRenderer" <br />            columnIndex="3" <br />            />         <br />    </mx:rendererProviders>  <br /><br />My Chartrenderer:<br /><br /><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" <br />     xmlns:local="*"><br />  <mx:Script><br />    <br />          import mx.collections.ArrayCollection;<br />          import mx.controls.Image;<br />          private var images:Array;                <br />          private var catalog:ArrayCollection;          <br />          private static var cat:Array = [<br />              "kpi_overtime_bar_10.png", "kpi_overtime_bar_20.png",<br />              "kpi_overtime_bar_30.png", "kpi_overtime_bar_40.png"<br />           ];<br />          <br />                    <br />           private function initCatalog(items:Array):void<br />           {<br />              catalog = new ArrayCollection(items);<br />              myList.dataProvider = catalog;<br />           }<br />                                     <br />      <br />    </mx:Script><br />     <mx:VBox height="20" width="40%" xmlns:mx="http://www.adobe.com/2006/mxml"<br />          horizontalScrollPolicy="off" <br />          verticalScrollPolicy="off"><br />          <mx:HorizontalList width="100%" id="myList"  <br />               horizontalScrollPolicy="off"<br />               verticalScrollPolicy="off"<br />               columnCount="4" <br />               creationComplete="initCatalog(cat)"><br />              <mx:itemRenderer><br />                    <mx:Component><br />                         <mx:Image width="50%" height="20"<br />                              maintainAspectRatio="false"/>                                <br />                    </mx:Component><br />               </mx:itemRenderer><br />          </mx:HorizontalList><br />     </mx:VBox><br /><br /></mx:Application><br /><br />This is a test I've done to see if I can palce a list of images in a cell,<br />and I can :)<br /><br />I have 2 problems:<br /><br />1. Here the size of each image is contant, I need a way to set each image in the list to be different,<br />Can I do it? <br />2. I need to load the images dynamically and not from a fixed Array,<br />Can I do it?<br /><br />It will be great to get help.....<br />Thanks<br />Jo

    On Sunday 15 Feb 2009, Yossi Bar wrote:
    > I think not all my descussion detailes were shown,
    I think you should be asking on FlexCoders...
    Tom Chiverton
    Helping to collaboratively enable 24/7 plug-and-play portals
    This email is sent for and on behalf of Halliwells LLP.
    Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB. A list of members is available for inspection at the
    registered office together with a list of those non members who are referred to as partners. We use the word partner to refer to a member of the LLP, or an employee or consultant with equivalent standing and qualifications. Regulated by the Solicitors Regulation Authority.
    CONFIDENTIALITY
    This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
    For more information about Halliwells LLP visit
    www.halliwells.com.

  • Problem setting up printer for AirPort Extreme wireless printing

    I have an AirPort Extreme 802.11n and I've connected my Canon MP240 printer to it via USB. However, my MacBook Pro (running OS X 10.8.4) says the printer is "offline" when it is plugged into AirPort Extreme and turned on. When I try to add it as a new printer, it recognizes it as a "Nearby Printer" and asks me to download and install the software from Apple. It then searches for the software for about a minute and gives me this error message: "Can't install the software for the Canon MP240 series because it is not currently available from the Software Update server." I've tried directly downloading the drivers from Apple's website http://support.apple.com/kb/DL899 and from Canon's website http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp240#DriversAndSoftware but neither work.
    HOWEVER, the strangest part is if I were to connect the printer to my MacBook Pro directly via USB, it recognizes the printer and I can print no problem. This leads me to believe the drivers have already been installed onto my computer. If anyone knows how to get around this issue I'd greatly appreciate the help.

    Hi biyyadiii,
    If you are having issues setting up your printer via your Airprot Extreme, you may find the following article helpful:
    Apple Support: USB printer troubleshooting for AirPort Express, AirPort Extreme, and AirPort Time Capsule
    http://support.apple.com/kb/TS1253
    Cheers,
    - Brenden

  • Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

    The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

    You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
    See if another contact is marked as this is my card.

  • Problem setting up database for dreamweaver 8 to use on testing server

    I am trying to try out dreamweavers database features, by
    trying to set up a connection to mysql database. How ever I recieve
    errors when trying to select my database. Either I get a long error
    that says it can not find localhost//_mmHTTP... something like that
    or undefiend errors message.
    I am using wamp5 set up on my local machine that installed
    apachie,php,mysql in one package. So maybe that has something to do
    with it, but none the less can someone give me a example of how
    they set theirs up to work with examples of where files should be
    located I can not seem to find anything like this in google, and I
    dont want to set it up on a remote server yet until I tested things
    on my local machine.

    Thanks Seth,
    I ran jcounsole, but I don't see anything except the process monitor registered.
    I don't think the server is starting sucessfully after the exception becuase I don't see the other parts
    of the application running.
    I forgot to mention in the last post that I've also added the line
    <BR>
    <BR>
    -Xbootclasspath/a:C:\bea\wlevs20\bin\mysql-connector-java-3.0.17-ga-bin.jar
    <BR>
    to the startup script to add in the location of the jar file that contains the JDBC driver.
    I was going to post the full stacktrace, but it's fairly long so I'll hold off unless you think it may help.
    I do get one additional exception after the <Server STARTED> message which is:
    A service of type "com.bea.core.datasource.DataSource:com.bea.core.datasource.DataSourceFactory" from file "OSGI-INF/datasource.xml" in bundle "com.bea.core.datasource" could not be advertised because all required services are not available. In particular, these are not available:
         1. RequiredReferenceImpl(filter="(objectClass=com.bea.core.transaction.TransactionManagerService)")
    <BR>
    but I think it may be related to the fact that the data source isn't being created.
    <BR>
    Thanks very much for taking a look,
    <BR>
    Mike

  • Problem setting up Tax for R12 Internet Expenses

    I am using Oracle R12 and am in the process on configuring Internet Expenses and have come across an issue with the tax set up. My issue is that I have created new tax rates in the Tax Manager responsibility for internet expenses (i have enabled the Internet Expenses check box when defining this new rate) and have assigned these rates to items in the Expense Templates. I have also enabled the profile option OIE: Enable Tax profile however when I create an expense report and it is imported into Payables the expense report does not populate with the tax code that I configured in the expense template. The tax code that is being populated is the default defined against the country code which is incorrect. Does anyone have any ideas how I can get the expense report to import with the correct tax code that is populated against the item in the expense template? Thanks

    Log into tax manager
    navigation: default and controls --->application tax options , in the application name, select internet expenses
    this where you tell the system to pick up tax from, depending on your set up, the tax gets defaulted
    so you need to define the hierarchy and if you want tax to default from you expense template you need to stipulate that in the set up
    Regards

  • Problems setting "table reference" for TopLink relationships

    I'm trying to use TopLink to create Java objects over two tables that are linked in a many-to-many relationship. I followed the instructions on the 10g tutorial page (drag all three tables into a database diagram), then created a new field (of type Collection) in each of the tables that I'm joining. I then set them both to be many-to-many, and tried to configure the first one. On the general tab, I've set the 'Reference Descriptor' to point to the other table. I've set the 'Relation Table' to point to the associative entity, and disabled indirection.
    When I go to the 'Source Reference' tab, there's nothing in the 'Table Reference' dropdown, and there's no button to create anywhere I can find on that screen. From what I've found looking at old TopLink documentation online, there were new, add, and remove buttons off to the right on older versions of TopLink.
    What do I have to do in this version to create a table reference I can use for the join?
    If I run the 'mapping status report' for the object I'm working with (persons), I get the following:
    Mapping persons -> Table reference is invalid because of the target table chosen.
    Mapping persons -> No table reference is selected.
    Mapping persons -> No source reference is selected.
    Mapping persons -> No target reference is selected.
    I don't really know enough about TopLink to know if these error messages are pointing at something other than the fact that I can't get a table reference to show up or not.
    I'm using the JDeveloper 10g preview (build 1375).
    Thanks in advance for any ideas you might have,
    Jonathan

    I'm trying to use TopLink to create Java objects over two tables that are linked in a many-to-many relationship. I followed the instructions on the 10g tutorial page (drag all three tables into a database diagram), then created a new field (of type Collection) in each of the tables that I'm joining. I then set them both to be many-to-many, and tried to configure the first one. On the general tab, I've set the 'Reference Descriptor' to point to the other table. I've set the 'Relation Table' to point to the associative entity, and disabled indirection.
    When I go to the 'Source Reference' tab, there's nothing in the 'Table Reference' dropdown, and there's no button to create anywhere I can find on that screen. From what I've found looking at old TopLink documentation online, there were new, add, and remove buttons off to the right on older versions of TopLink.
    What do I have to do in this version to create a table reference I can use for the join?
    If I run the 'mapping status report' for the object I'm working with (persons), I get the following:
    Mapping persons -> Table reference is invalid because of the target table chosen.
    Mapping persons -> No table reference is selected.
    Mapping persons -> No source reference is selected.
    Mapping persons -> No target reference is selected.
    I don't really know enough about TopLink to know if these error messages are pointing at something other than the fact that I can't get a table reference to show up or not.
    I'm using the JDeveloper 10g preview (build 1375).
    Thanks in advance for any ideas you might have,
    Jonathan

  • Problem setting data collection for SLD

    Good day
    I have the following situation.
    A Solution Manager 71 installation, just recently patched to SP11. Previously I had the SLD on this system. And then a colleague informed that this could be a problem in the future as my ECC systems are Basis 731 which is higher level than the 702 on the Solution Manager system. So I installed a separate Java stack system on the same server as the Solution Manager.
    The problem that I am faced with now is that I cant get the data collection (RZ70) to connect with the new Java system that I have installed. When I go into SLD and Administration, I see under Details>Data Suppliers that the server is specified as the Gateway Host, with a Gateway port of 3303. On the Solution Manager system it specified the gateway host as "localhost" and the gateway port as sapgw00.
    So, from RZ70 I specify the gateway service as sapgw03 and then I get the result:
    0: DSIMSID001_SID_00                    
    : Collection of SLD data finished
    0: DSIMSID001_SID_00                    
    : Data collected successfully
    0: DSIMSID001_SID_00                    
    : RFC data prepared
    0: DSIMSID001_SID_00                    
    : Used RFC destination: SLD_NUC
    0: DSIMSID001_SID_00                    
    : RFC call failed: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
    0: DSIMSID001_SID_00                    
    : Batch job not scheduled
    And from the SLD_NUC entry in SM59 I get
    Logon    Connection Error
    Error Details    Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
    Error Details    ERROR: SAP gateway communication error (Is SAP gateway closed?)
    Error Details    LOCATION: SAP-Server DSIMSID001_SID_00 on host DSIMSID001 (wp 1)
    Error Details    COMPONENT: CPIC
    Error Details    COUNTER: 47
    Error Details    MODULE:
    Error Details    LINE:
    Error Details    RETURN CODE: 239
    Error Details    SUBRC: 0
    Error Details    RELEASE: 721
    Error Details    TIME: Mon Mar 16 14:04:05 2015
    Error Details    VERSION:
    Can anyone give me a few ideas what may be wrong here please?
    Regards
    Ray Phillips

    Hi Ray,
    Please check if the below SLD configuration is done.You can use any one of the two below link depending on how you want to configure your SLD.
    Configure SLD for JCo and Creation of JCo Destinations - Portal - SCN Wiki
    or
    How to Create & Configure Local SLD on SAP NetWeaver 7.3 AS Java after Installation
    If your SLD server is not a local SLD then make sure that in both the SLD system and the remote system host fine entry is there in /etc/hosts and etc/services.

  • Problems setting ipod nano for manual importi

    My son set up his new ipod 2G nano on a friend's computer, and I cannot figure out how to import songs manually from my personal i-book.
    I updated my i-tunes and tiger this morning, so the software should be up-to-date.
    The "summary pane" never appears, and I don't see the "summary tab."
    Needless to say, he doesn't want his mother's music on his nano.
    What can I do?
    imac g4 flat screen   Mac OS X (10.2.x)   ibook G4 OS X 10.4.10

    Please disregard this message. Problem solved.

  • HT201320 having problems setting up email for a tiscali email address - after trying to verify ipda comes up saying cannot connect using SSL

    trying to set up my tiscali email address on an ipad mini, after trying to verify, message comes up stating "cannot connect using SSL"

    Not sure what the shortcut is. I'm just going, Settings > Mail > Add Account > Gmail
    That is the GMail shortcut. That should work. Just for testing, use the "Other" shortcut.
    Settings / Mail / Add Account / Other
    Name: <put your name>
    Email [email protected]
    Incoming server: pop.gmail.com
    Login: [email protected]
    Password: yourpassword
    Outgoing server: smtp.gmail.com
    Login: [email protected]
    Password: yourpassword
    Hit SAVE.
    It should set itself up correctly without you having to specify anything else. Try that.

Maybe you are looking for