Problem start-up N95

If I will startup my N95, I only get a white screen with the Nokia sign.
The start will not go further, till the inlogpage.
I saw an almost equal problem from Willowrise - subject"Nokia N95 frozen at start up".
I tried all the suggestions without any solution.
Please who can help me?

Try advice from second post
/discussions/board/message?board.id=hardware&thread.id=6601
N95 & N96 User

Similar Messages

  • Possible Problem for US N95 User Upgrading to Firm...

    On July 19, 2007 the new firmware version 12.0.013 for Nokia N95 became available through Nokia Software Updater for US product coded N95s. I installed it and only within 1-2 hours my phone messed up. It is now almost unusable. I am trying to figure out whether this problem stems from the new firmware or from another source that occurred by chance immediately after the installation of the firmware. I posted 2 videos on youtube showing the issues.
    http://www.youtube.com/watch?v=Kl5NK4aTpy0&;mode=related&search=
    http://www.youtube.com/watch?v=-ZEEjyow7bQ
    I would like to hear what you think, especially whether you have ever seen or heard the same problem in any firmware version.
    Thanks!
    mg428

    Hi Please read this link as I had exactly the same problem and this is the way i went about solving it. The phone became totally useless and i even got an error code when starting it up. This does work. Tried to link but couldn't get it to work.
    Hi All.
    On two different N95 when i upgraded the phones these are the problems i experienced and how i solved it. Just to inform you the two phone were set up totally different with totally different software on it but both were upgraded from v10
    First of all i made backups onto the memory cards as suggested by Nokia. Don't do this!!!! backup to PC and restore from there.
    I then ran the update with no Problems and restored from the memory card. Big problems started. First of all the main screen lost all it's functions and there where no standby shortcuts on the phones. I could get into the menus by pressing the menu keys but even trying to setup the phone from here gave me no results. The standby shortcuts could not be restored at all and i think the problem has to do with the Active standby apps. or Standby mode. Even the two shortcut keys at the bottom of the phone were gone. After which i rebooted the phone. Even worse things happened then the phone then said "Failed to load or Phone load failure. Contact your Phone Retailer"
    The way to fix this is to press and hold the ( 3 * and the green answer key ) and then switch the phone on hold these three key until it asks for the country you live in. This formats the phone. Enter all the data asked for that is country, time and date.
    Then restore from your memory card and straight away go into your phone settings using the menu key. Go to General setting and load the Factory Settings. After this re-customize your phone and everything works like a charm.
    I have had no more problems from then on. Oh and the phone is a lot quicker.
    The only problem i've had with the phone from v10 and still in v12 is that i can't choose a ring tone from the memory card. The card holds about 900 songs (2 gig card). The only choice i have is to select no ring tone or to download on. The way i get to choose my ring tone is to copy the song or ring tone to the phones memory remove the mem card select the tune from the phone once i've done this i re insert the mem card and carry on from there.
    Hope this is helpful.
    Best to you all.
    The N95 is a great phone though.Message Edited by hotcat4 on 20-Jul-200706:11 PM

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

    Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
    There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
    Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
    Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

    as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

  • Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

    Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying.  iPhone remote app works just fine.  Any suggestions?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Problem starting logical host on eGate 5.1.0

    I'm having problem starting logical host for eGate 5.1.0 on Linux platform, and I cant see where is the problem lies. Is there anybody here that can give me some hint or guide?
    Below is the error message from the log.
    [#|2006-08-22T17:57:28.506+0800|WARNING|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|STCMS process ended unexpectedly with exit code 1; initiating application server restart|#]
    [#|2006-08-22T17:57:28.567+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=11; ThreadName=STCMS process monitoring;|sending restart notification to server...server|#]
    [#|2006-08-22T17:57:28.721+0800|WARNING|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|core.tmp_folder_deletion_failed|#]
    [#|2006-08-22T17:57:28.722+0800|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|stcms.alert_shutting_down|#]
    [#|2006-08-22T17:57:28.722+0800|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|stcms.broker_shutting_down|#]
    [#|2006-08-22T17:57:31.020+0800|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Creating virtual server server|#]
    [#|2006-08-22T17:57:31.039+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|IS AVK Instrumentation disabled|#]
    [#|2006-08-22T17:57:31.045+0800|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
    [#|2006-08-22T17:57:31.117+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC JTS Extension] The last agent commit optimization is enabled.|#]
    [#|2006-08-22T17:57:32.315+0800|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]EE/SE Corba Util delegate loaded|#]
    [#|2006-08-22T17:57:33.730+0800|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]Enabling SE Corba support|#]
    [#|2006-08-22T17:57:34.007+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5082: Exception running j2ee services: [java.lang.RuntimeException: java.lang.ExceptionInInitializerError]|#]
    [#|2006-08-22T17:57:34.008+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=0;|CORE5091: Error executing J2EE server ...
    java.lang.RuntimeException: java.lang.ExceptionInInitializerError
         at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
         at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
         at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
    Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
         at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
         at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
         at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
         ... 9 more
    Caused by: java.lang.ExceptionInInitializerError
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:164)
         at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
         ... 11 more
    Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
         at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
         at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
         at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
         ... 14 more
    |#]
    [#|2006-08-22T17:57:34.012+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5092: J2EE server reported following error: [java.lang.ExceptionInInitializerError] |#]
    [#|2006-08-22T17:57:34.012+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5093: Error executing J2EE server |#]
    [#|2006-08-22T17:57:34.013+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=1;|CORE5071: An error occured during initialization
    com.sun.appserv.server.ServerLifecycleException: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
         at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:235)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
    Caused by: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
         at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:763)
         at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
         ... 7 more
    Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
         at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
         at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
         ... 8 more
    Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
         at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
         at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
         at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
         ... 9 more
    Caused by: java.lang.ExceptionInInitializerError
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:164)
         at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
         ... 11 more
    Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
         at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
         at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
         at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
         ... 14 more
    |#]
    [#|2006-08-22T17:57:34.023+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server Startup failed. Exiting...|#]
    [#|2006-08-22T17:57:34.023+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server shutdown in progress...|#]
    [#|2006-08-22T17:57:34.024+0800|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|WEB0303: Stopping Tomcat.|#]
    [#|2006-08-22T17:57:34.025+0800|WARNING|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=2;|CORE5061: Exception :
    com.sun.appserv.server.ServerLifecycleException: WEB0106: An error occurred while stopping the web container
         at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:536)
         at com.sun.enterprise.web.PEWebContainerLifecycle.onShutdown(PEWebContainerLifecycle.java:65)
         at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:255)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
    Caused by: LifecycleException: WEB0103: This web container has not yet been started
         at com.sun.enterprise.web.WebContainer.stop(WebContainer.java:529)
         at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:528)
         ... 9 more
    |#]
    Hopefully somebody can help me as I'm stuck with it for few days already. Thank you.

    This is what I got when I try to start the server from the directory logicalhost/is/domains/domain1/bin/
    ./startservAug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger <init>
    INFO: Setting URL to http://localhost:18000
    Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
    INFO: Opening connection to http://localhost:18000
    Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
    INFO: Connection to http://localhost:18000 opened successfully.
    Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
    SEVERE: Connection refused
    java.net.ConnectException: Connection refused
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.Socket.connect(Socket.java:507)
    at java.net.Socket.connect(Socket.java:457)
    at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
    at sun.net.www.http.HttpClient.openServer(HttpClient.java:365)
    at sun.net.www.http.HttpClient.openServer(HttpClient.java:477)
    at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
    at sun.net.www.http.HttpClient.New(HttpClient.java:287)
    at sun.net.www.http.HttpClient.New(HttpClient.java:299)
    at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:792)
    at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:744)
    at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
    at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:367)
    at com.stc.is.util.pinger.HttpOKPinger.isAlive(Unknown Source)
    at com.stc.is.util.Ping.main(Unknown Source)
    Aug 23, 2006 7:23:55 PM com.stc.is.util.Ping main
    INFO: IS is not alive.
    Startup failed.
    any clue what is it about?

  • Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help!

    Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help.....

    I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing

  • My phone battery can only last an hour. Problem started a week ago while I was in Argentina. I am back in the country now, this morning I left the house with a full battery and when I got to work the phone had shut down. Phone is 7 months old. Why?

    Dear Apple Family,
    I have been using an iPhone since I lost interest with Nokia phones. I fell in love with Apple's innovation, design and technology.  However, I am beginning to lose interest wth the product as well.
    I have an iPhone 5, my phone's battery can only last an hour and the phone is 7 month old.  The problem started last week while I was in Argentina. I had a bad holiday due to this, as I could not make use of the technology because my phone was off most of the time and I had nowehere to charge except to go back to the hotel.  I could not even share pictures on Instagram.  Has anyone ever experienced such a problem?  If so, why and how was the problem fixed?  I am starting to engage in a debate that I have been trying to avoid with my friends.  They say that Samsung is striving and I now tend to agree, and if the problem persists I will gladly join the Samsung family. They seem to make reliable phones.  Sadly, I never experienced this problem with iPhone 3GS & iPhone 4S.
    With Gratitude,
    Thapelo

    Hello,
    If you're in a country where there's an apple shop (unfortunately not mine), go check it and ask the employee about it: he's gonna check your Iphone on a "device"
    I've got an iphone 5 and it's working very well with me but I have to admit that its battery lasts (slower) than my Ipad 2.
    Still i can help with some tips that may improve your iohone's battery by an hour in addition (hopefully):
    - close all apps by multitasking....
    - do NOT keep the brightness to the max
    Believe me you're gonna regret changing your phone to a samsung
    Hope i've helped and sorry for my bad english (has english as 3rd language)

  • When I try to transfer songs to my ipod touch or my friends ipod nano in which both have manually managed music, I get error 13019 "Ipod cannot be synced".  This problem started to occur all of a sudden. Any ideas other than the resyncing?

    When I try to transfer songs to my ipod touch or my friends ipod nano, I get error 13019 "Ipod cannot be synced".  Everything was working fine and transferring successfully and then this problem started to occur all of a sudden. My music is managed manually and always has. I looked online for a solution and they all involve resyncing the library and unchecking voice memos. Is there a way to resolve this issue without having to resync my music or reinstall itunes?

    Have you powered off and then back on the router?
    Have you done anything to the router recently like changed a setting?
    Have you tried:
    - Resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Resetting network settings: Settings>GeneralReset>Reset Network SettingsTo me the error sounds like a network/router problem vice aan iPod problem.

  • My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

    My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

    a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
    The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

  • I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unable to do so with my iMac. This problem started suddenly and the error message i get is error 5.7.8. Please Help

    I  am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?

    As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
    Office for Mac forums

  • Problem connecting Nokia N95 to Audi MMI via Audi ...

    Hello again!
    My dad has recently upgraded his phone from his old-ish Motorola RAZR to the N95 and now can't connect properly to the car. He bought the handsfree set when he still had the Nokia 6310, so it's designed for that, but his next phone, the Motorola had no problem synching with the car and everything worked fine. But now, with the new one, it only works as a headset of sorts. The phonebook is inaccessible, and the ringing is only heard when you make the initial connection, and even that the standard ring ring, not the mp3 he has as his ringtone. And from the second auto-connect afterwards, the MMI only mutes the radio, and makes no other sound.
    I've paired my Nokia 6280 with it and it works as it should, addressbook, ringtone and all.
    Is this the problem of the N95 not supporting the old version of Bluetooth, like i've been reading on the forum and can't be resoloved by any other means than getting another phone or can it be solved by a simple firmware upgrade?
    Also, i've tried googling for UHV 1733 and haven't had a single hit. I am confused. :?

    I don't know personally but it has been discusse before somewhere else. Try this link:
    http://discussions.apple.com/thread.jspa?messageID=4735345&#4735345
    Hope that helps

  • Error code: MobileMe Services has encountered a problem and needs to close - I get this message everytime i open Outlook and it slows down opening?  This problem started when itunes updated

    Error code: MobileMe Services has encountered a problem and needs to close
    I get this mesage everytime i open Outlook and it slows down opening. This problem started when itunes updated. What do I do to solve this?

    Hi turingtest2 (you pass, BTW):  Thanks for the speedy reply.  MobileMe doesn't appear in the list of programs which can be uninstalled.  I tried the link you suggest: http://support.microsoft.com/mats/Program_Install_and_Uninstall but when I tried to "Run Now", I get the error message:  " Troubleshooting cannot continue because an error has occurred... etc.... [code 80072F8F]"  So googled this error & found a tool called (80072f8f) Repair Tool   -  I'm leery to download yet more stuff from non-microsoft sites -- any recommendations?

  • Problem starting weblogic server

    Can I use third party libraries with the evaluation copy of the weblogic
    server?
    I am having problems starting the weblogic server with third party
    libraries (i.e. oralce's sqlj's translator.zip, runtime.zip and
    classes2.zip). The following exception is thrown when the server is
    initialising:
    Can someone explain what is wrong please?
    Many thanks
    Gilbert Owusu
    15:17:10 GMT 2000:<I> <System Props> weblogic.system.home = C:\weblog
    ic
    Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Loaded License :
    C:/weblogic/l
    icense/WebLogicLicense.xml
    Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Server loading from
    weblogic.c
    lass.path. EJB redeployment enabled.
    java.lang.Exception: Problem with X509 certificate: fingerprint =
    5ebfaa56b17289
    3f050b19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after
    = Sun M
    ay 28 22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco
    O=BEA WebLo
    gic CN=weblogic.beasys.com [email protected] , issuer = C=US
    SP=Califor
    nia L=San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=s
    [email protected] , key = modulus length=65 exponent length=3,
    java.lang.Exc
    eption: Certificate expired or not yet valid: fingerprint =
    5ebfaa56b172893f050b
    19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
    May 28
    22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
    WebLogic CN
    =weblogic.beasys.com [email protected] , issuer = C=US
    SP=California L=
    San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=securit
    [email protected] , key = modulus length=65 exponent length=3
    at
    weblogic.t3.srvr.SSLListenThread.insertIntoCAChain(SSLListenThread.ja
    va:206)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java,
    Compile
    d Code)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    Mon Jun 19 15:17:16 GMT 2000:<E> <SSLListenThread> Security
    Configuration Proble
    m with SSL server certificate file (C:\weblogic\myserver\democert.pem),
    java.lan
    g.Exception: Problem with X509 certificate: fingerprint =
    5ebfaa56b172893f050b19
    ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
    May 28 22
    :03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
    WebLogic CN=w
    eblogic.beasys.com [email protected] , issuer = C=US
    SP=California L=Sa
    n Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=security@
    weblogic.com , key = modulus length=65 exponent length=3,
    java.lang.Exception:
    Certificate expired or not yet valid: fingerprint =
    5ebfaa56b172893f050b19ae79d8
    0547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun May 28
    22:03:47
    GMT 2000, holder = C=US SP=California L=San Francisco O=BEA WebLogic
    CN=weblogi
    c.beasys.com [email protected] , issuer = C=US SP=California
    L=San Fran
    cisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=security@weblog
    ic.com , key = modulus length=65 exponent length=3
    Mon Jun 19 15:17:17 GMT 2000:<I> <Security> Not listening for SSL:
    java.io.IOExc
    eption: Security Configuration Problem with SSL server certificate file
    (C:\webl
    ogic\myserver\democert.pem), java.lang.Exception: Problem with X509
    certificate:
    fingerprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
    22:03:4
    7 GMT 2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
    SP=Californi
    a L=San Francisco O=BEA WebLogic CN=weblogic.beasys.com
    [email protected]
    om , issuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
    CN=Demo
    Certificate Authority [email protected] , key = modulus
    length=65 exp
    onent length=3, java.lang.Exception: Certificate expired or not yet
    valid: finge
    rprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
    22:03:47 GMT
    2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
    SP=California L=Sa
    n Francisco O=BEA WebLogic CN=weblogic.beasys.com
    [email protected] , i
    ssuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
    CN=Demo Certif
    icate Authority [email protected] , key = modulus length=65
    exponent
    length=3
    Mon Jun 19 15:17:19 GMT 2000:<I> <WebLogicServer> Invoking main-style
    startup we
    blogic.jdbc.common.internal.JdbcStartup
    weblogic.jdbc.common.internal.JdbcStartu
    p
    Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Beginning startup process
    Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Init JMS Security
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Initializing from
    weblogic.properties
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Startup process complete. JMS is
    active
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound SessionPoolManager as
    weblogic.jms.
    SessionPoolManager
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound ConnectionConsumerManager
    as weblog
    ic.jms.ConnectionConsumerManager
    Mon Jun 19 15:17:21 GMT 2000:<I> <WebLogicServer> Invoking main-style
    startup RM
    I Registry weblogic.rmi.internal.RegistryImpl
    Mon Jun 19 15:17:21 GMT 2000:<I> <RMI> Registry started
    Mon Jun 19 15:17:21 GMT 2000:<I> <EJB> Enterprise JavaBeans initializing
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.reflect.InvocationTargetException
    java.lang.reflect.InvocationTargetException:
    java.lang.NoClassDefFoundError: sql
    j/runtime/ConnectionContext
    at java.lang.ClassLoader.resolveClass0(Native Method)
    at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:172)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
    at
    weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
    at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
    pl.java:576)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
    .java, Compiled Code)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
    :335)
    at
    weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
    31)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
    iled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
    2)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
    Compiled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    java.lang.NoClassDefFoundError: sqlj/runtime/ConnectionContext
    at java.lang.ClassLoader.resolveClass0(Native Method)
    at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:172)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
    at
    weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
    at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
    pl.java:576)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
    .java, Compiled Code)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
    :335)
    at
    weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
    31)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
    iled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
    2)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
    Compiled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    WebLogic Server terminated with an abnormal condition of 1
    Hit return to continue...>>>>>>>>>

    It appears that you have two different problems:
    1 -- you are using an expired certificate. You should download the
    latest version of the evaluation to get a new certificate.
    2 -- you should check out the documentation on using the
    Weblogic.class.path. That is where you should put all of your user
    classes including those that you get from Oracle.
    Thanks,
    Michael
    G Owusu wrote:
    >
    Can I use third party libraries with the evaluation copy of the weblogic
    server?
    I am having problems starting the weblogic server with third party
    libraries (i.e. oralce's sqlj's translator.zip, runtime.zip and
    classes2.zip). The following exception is thrown when the server is
    initialising:
    Can someone explain what is wrong please?
    Many thanks
    Gilbert Owusu
    15:17:10 GMT 2000:<I> <System Props> weblogic.system.home = C:\weblog
    ic
    Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Loaded License :
    C:/weblogic/l
    icense/WebLogicLicense.xml
    Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Server loading from
    weblogic.c
    lass.path. EJB redeployment enabled.
    java.lang.Exception: Problem with X509 certificate: fingerprint =
    5ebfaa56b17289
    3f050b19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after
    = Sun M
    ay 28 22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco
    O=BEA WebLo
    gic CN=weblogic.beasys.com [email protected] , issuer = C=US
    SP=Califor
    nia L=San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=s
    [email protected] , key = modulus length=65 exponent length=3,
    java.lang.Exc
    eption: Certificate expired or not yet valid: fingerprint =
    5ebfaa56b172893f050b
    19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
    May 28
    22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
    WebLogic CN
    =weblogic.beasys.com [email protected] , issuer = C=US
    SP=California L=
    San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=securit
    [email protected] , key = modulus length=65 exponent length=3
    at
    weblogic.t3.srvr.SSLListenThread.insertIntoCAChain(SSLListenThread.ja
    va:206)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java,
    Compile
    d Code)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    Mon Jun 19 15:17:16 GMT 2000:<E> <SSLListenThread> Security
    Configuration Proble
    m with SSL server certificate file (C:\weblogic\myserver\democert.pem),
    java.lan
    g.Exception: Problem with X509 certificate: fingerprint =
    5ebfaa56b172893f050b19
    ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
    May 28 22
    :03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
    WebLogic CN=w
    eblogic.beasys.com [email protected] , issuer = C=US
    SP=California L=Sa
    n Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=security@
    weblogic.com , key = modulus length=65 exponent length=3,
    java.lang.Exception:
    Certificate expired or not yet valid: fingerprint =
    5ebfaa56b172893f050b19ae79d8
    0547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun May 28
    22:03:47
    GMT 2000, holder = C=US SP=California L=San Francisco O=BEA WebLogic
    CN=weblogi
    c.beasys.com [email protected] , issuer = C=US SP=California
    L=San Fran
    cisco O=WebLogic OU=Security CN=Demo Certificate Authority
    Email=security@weblog
    ic.com , key = modulus length=65 exponent length=3
    Mon Jun 19 15:17:17 GMT 2000:<I> <Security> Not listening for SSL:
    java.io.IOExc
    eption: Security Configuration Problem with SSL server certificate file
    (C:\webl
    ogic\myserver\democert.pem), java.lang.Exception: Problem with X509
    certificate:
    fingerprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
    22:03:4
    7 GMT 2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
    SP=Californi
    a L=San Francisco O=BEA WebLogic CN=weblogic.beasys.com
    [email protected]
    om , issuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
    CN=Demo
    Certificate Authority [email protected] , key = modulus
    length=65 exp
    onent length=3, java.lang.Exception: Certificate expired or not yet
    valid: finge
    rprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
    22:03:47 GMT
    2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
    SP=California L=Sa
    n Francisco O=BEA WebLogic CN=weblogic.beasys.com
    [email protected] , i
    ssuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
    CN=Demo Certif
    icate Authority [email protected] , key = modulus length=65
    exponent
    length=3
    Mon Jun 19 15:17:19 GMT 2000:<I> <WebLogicServer> Invoking main-style
    startup we
    blogic.jdbc.common.internal.JdbcStartup
    weblogic.jdbc.common.internal.JdbcStartu
    p
    Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Beginning startup process
    Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Init JMS Security
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Initializing from
    weblogic.properties
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Startup process complete. JMS is
    active
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound SessionPoolManager as
    weblogic.jms.
    SessionPoolManager
    Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound ConnectionConsumerManager
    as weblog
    ic.jms.ConnectionConsumerManager
    Mon Jun 19 15:17:21 GMT 2000:<I> <WebLogicServer> Invoking main-style
    startup RM
    I Registry weblogic.rmi.internal.RegistryImpl
    Mon Jun 19 15:17:21 GMT 2000:<I> <RMI> Registry started
    Mon Jun 19 15:17:21 GMT 2000:<I> <EJB> Enterprise JavaBeans initializing
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.reflect.InvocationTargetException
    java.lang.reflect.InvocationTargetException:
    java.lang.NoClassDefFoundError: sql
    j/runtime/ConnectionContext
    at java.lang.ClassLoader.resolveClass0(Native Method)
    at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:172)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
    at
    weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
    at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
    pl.java:576)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
    .java, Compiled Code)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
    :335)
    at
    weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
    31)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
    iled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
    2)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
    Compiled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    java.lang.NoClassDefFoundError: sqlj/runtime/ConnectionContext
    at java.lang.ClassLoader.resolveClass0(Native Method)
    at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:172)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
    at
    weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
    at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
    pl.java:576)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
    .java, Compiled Code)
    at
    weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
    :335)
    at
    weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
    31)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
    iled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
    2)
    at
    weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
    at
    weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
    Compiled Code)
    at
    weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    WebLogic Server terminated with an abnormal condition of 1
    Hit return to continue...>>>>>>>>>

  • Problem starting or stopping dbconsole (Application Server 10.1.2.0.2)

    Hi all,
    i have problem starting application server dbconsole and i am getting following error in oracle_home/sid/sysman/log
    2008-10-27 22:45:36 Thread-1 WARN http: snmehl_connect: connect failed to (localhost.mycompany.com:1830): A remote host refused an attempted connect op
    eration. (error = 79)
    2008-10-27 22:45:37 Thread-1 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
    2008-10-27 22:45:38 Thread-1 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
    i have seen in the metalink to set the timezone which might have got changed. but after running didn't get changed anything and this is on AIX 5.3 and since its day-light changing time
    some old machines running on AIX timezone been changed. any advise or idea
    Thanks,

    i found the solution. that is applying DST patch (AIX version 10.1.0.5)

Maybe you are looking for