Problem starting OpenOffice with KDE [Solved]
I just did a clean Arch install witk KDE desktop. After I installed OpenOffice with
pacman -Sy openoffice-base
when I try to start openoffice I get the following error message
"The application cannot be started. An internal error occurred."
I tried to reinstall OpenOffice but that didn't help.
Any ideas whats going wrong? OpenOffice worked fine with Gnome before I did a clean install.
-A-
this problem is caused as some files on the install or somewhere else got assigned root permissions so that is the problem. i deleted the folder and everything recreated ok.
I have the same problem, but deleting ~/.openoffice.org2 haven't solved the problem, so I looked up this forum for other solutions and nothing helped.
From other topic: That's not a java problem, I think.
Any ideas?
Similar Messages
-
Hi again
I'm using KDE 4, and I've just installed JACK again, and since I can't find any decent documentation on this, I'm having a bit of a problem.
Currently I have jack from [extra] installed, rather than jack2. When I try starting jack as the ArchWiki suggests, i.e. by typing "jackd -d alsa", I get the following error:
$ jackd -d alsa
jackd 0.120.1
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
the playback device "hw:0" is already in use. Please stop the application using it and run JACK again
cannot load driver module alsa
I've also tried jack2 from [community], and after starting it with "jack_control start", I get this...
$ jack_control start
--- start
DBus exception: org.jackaudio.Error.Generic: Failed to start server
So how do I start it? I'm guessing jack doesn't want to start because some other KDE application grabbed alsa before jackd (but I've been wrong before), and I don't have the slightest idea what jack2 is about with that "generic" error. If anyone would help me shed some light on this, I'd appreciate it a lot.
Thanks in advance!
Last edited by Wintershade (2011-03-26 19:22:08)@schivmeister thanks that one worked
Yes, it was knotify4. So now this part works. I've switched to jack2 and it works flawlessly when starting it with jackd
So this part is solved... now, would you be so kind (if you know) as to point me to some tutorials or howtos (or proper documentation, cos I can't find much of that either) on how to connect various ALSA channels with JACK?
Basically, I want to route my PCM channel and the Mic channel into Capture 1 (or one to Capture 1 and other to Capture 2), since my Intel HDA audio card doesn't have the "Mix" or "What-U-Hear" or whatever as an available capture source. Any leads on that? (or do I have to open another thread for it?)
TIA -
Problem starting servers with nodemanager
Hi,
I'm following the Oracle By Example:
[http://www.oracle.com/technology/obe/fusion_middleware/wls103/InstallConfig/admin_mngd_srvr/admin_ms_using_nm.htm]
I have installed on Windows (not on Linux), but that shouldn't make much difference.
Now look at what I got on Step 10 of the OBE:
OUTPUT
D:\oracle\Middleware\user_projects\domains\dizzyworld\bin>startManagedWebLogic.cmd dizzy1 http://localhost:7001
JAVA Memory arguments: -Xms256m -Xmx512m -Xns128m -Xgcprio:pausetime -XpauseTarget:200ms
WLS Start Mode=Production
CLASSPATH=D:\oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\oracle\MIDDLE~1\JROCKI~1.5-3\lib\to
ols.jar;D:\oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\oracle\MIDDLE~1\W
LSERV~1.3\server\lib\weblogic.jar;D:\oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;D:\oracle\MIDDLE~1\WLSERV~1.3\ser
ver\lib\webservices.jar;D:\oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;D:\oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:
\oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;D:\oracle\MIDDLE~1\pa
tch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar;D:\oracle\MIDDLE~1\util
s\config\10.3\config-launch.jar;D:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.j
ar;D:\oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;D:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\orac
le\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;D:\oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\Java\jre6\lib\
ext\QTJava.zip
PATH=D:\oracle\MIDDLE~1\patch_wls1032\profiles\default\native;D:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\oracle\MIDDLE~1\WLSERV~1
.3\server\bin;D:\oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;D:\oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin;D:\oracle\MIDDLE~1\JROCKI~1.5-3\bin;D:\oracl
e\MIDDLE~1\patch_wls1032\profiles\default\native;D:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\oracle\MIDDLE~1\WLSERV~1.3\server\bin
;D:\oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;D:\oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin;D:\oracle\MIDDLE~1\JROCKI~1.5-3\bin;D:\app\alsemgpa\produ
ct\11.2.0\dbhome_2\bin;D:\oracle\product\11.1.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\Win
dowsPowerShell\v1.0\;C:\Program Files\Microsoft Application Virtualization Client;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program File
s\Windows Imaging\;C:\Program Files\IDM Computer Solutions\UltraEdit-32;C:\Program Files\QuickTime\QTSystem\;D:\oracle\MIDDLE~1\WLSERV~1.3\s
erver\native\win\32\oci920_8;D:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, initial strategy: Generational Parallel Mark & Sweep
[INFO ][memory ] heap size: 65536K, maximal heap size: 1048576K, nursery size: 32768K
[INFO ][memory ] s-end: GC beforeK-after K (heap K), pause ms
[INFO ][memory ] s/start - start time of collection (seconds since jvm start)
[INFO ][memory ] end - end time of collection (seconds since jvm start)
[INFO ][memory ] before - memory used by objects before collection (KB)
[INFO ][memory ] after - memory used by objects after collection (KB)
[INFO ][memory ] heap - size of heap after collection (KB)
[INFO ][memory ] pause - total sum of pauses during collection (milliseconds)
[INFO ][memory ] run with -Xverbose:gcpause to see individual pauses
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
BEA JRockit(R) (build R27.6.5-32_o-121899-1.6.0_14-20091001-2107-windows-ia32, compiled mode)
Redirecting output from WLS window to D:\oracle\MIDDLE~1\USER_P~1\domains\DIZZYW~1\servers\AdminServer\logs\garbage.log
Het proces heeft geen toegang tot het bestand omdat het door een ander
proces wordt gebruikt.
D:\oracle\Middleware\user_projects\domains\dizzyworld\bin>
The last line says in Dutch "The process has no access to the file because it is being used by another process". I don't know if that is relevant.
Question
Now when I go back to my admin console, I don't see dizzy1 server RUNNING, it has status SHUTDOWN. Screen refresh doesn't help either.
Any suggestions ??
Edited by: PaulAlsemgeest on Apr 12, 2010 9:43 AM
Edited by: PaulAlsemgeest on Apr 12, 2010 9:44 AM
Edited by: PaulAlsemgeest on Apr 12, 2010 9:44 AM
Edited by: PaulAlsemgeest on Apr 12, 2010 9:45 AM
Edited by: PaulAlsemgeest on Apr 12, 2010 9:45 AMuser12115898 wrote:
Try to see if anything is running on that port ( the port you specified for dizzy1) also try to see if anything is running with the name dizzy1 on that box. Because sometime it happens that console doesnt update so if anything is running on that box with the same name or on that port, then kill it and try to restart it again.Hi,
I did an netstat -na > checkports.log
The server dizzy1 has been configured with Listen Port 7003 and SSL Listen Port 7004. Both are not in the checkports.log.
What I did see in my nodemanager.log was:
Domains file not found: D:\oracle\MIDDLE~1\WLSERV~1.3\common\NODEMA~1\nodemanager.domains, this is strange, because the file is really there.
And when I try to start server dizzy1, the Console gives the
Messages
- Warning For server dizzy1, the Node Manager associated with machine dizzyMachine1 is not reachable.
- Warning All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
Any further help greatly appreciated. -
Problem starting server with nodemanager
Hello,
I have a cluster running on JRockit on Windows 2003 sever and everything works fine when I start nodes from command line, but when I try to start cluster nodes from admin console through node managers in the log file I get:
=================
<Jul 21, 2006 10:50:57 AM> <Info> <NodeManager> <Starting WebLogic server with command line: C:\bea\JROCKI~1\jre\bin\java -Dweblogic.Name=Alfa1 -Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy -Dweblogic.management.server=http://141.146.8.111:7001 -Djava.library.path=C:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\bea\WEBLOG~1\server\native\win\32;C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\bea\WEBLOG~1\server\native\win\32\oci920_8;c:\program files\imagemagick-6.2.8-q16;C:\Program Files\Support Tools\;C:\Program Files\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\ -Djava.class.path=.;C:\bea\patch_weblogic910\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\JROCKI~1\lib\tools.jar;C:\bea\WEBLOG~1\server\lib\weblogic_sp.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\webservices.jar -Dweblogic.system.BootIdentityFile=C:\bea\user_projects\domains\alfa_domain2\servers\Alfa1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false weblogic.Server >
<Jul 21, 2006 10:50:57 AM> <Info> <NodeManager> <Working directory is "C:\bea\user_projects\domains\alfa_domain2">
<Jul 21, 2006 10:50:57 AM> <Info> <NodeManager> <Server output log file is "C:\bea\user_projects\domains\alfa_domain2\servers\Alfa1\logs\Alfa1.out">
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-jrockit to select the "jrockit" VM
-client to select the "client" VM
-server to select the "server" VM [synonym for the "jrockit" VM]
The default VM is jrockit.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
-agentlib:<libname>[=<options>]
load native agent library <libname>, e.g. -agentlib:hprof
see also, -agentlib:jdwp=help and -agentlib:hprof=help
-agentpath:<pathname>[=<options>]
load native agent library by full pathname
-javaagent:<jarpath>[=<options>]
load Java programming language agent, see java.lang.instrument
<Jul 21, 2006 10:50:59 AM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
==============
It seems that node manager appends system PATH to the java.library.path of the server it is trying to start. The problem is spaces in the system PATH:
-Djava.library.path=C:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\bea\WEBLOG~1\server\native\win\32;C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\bea\WEBLOG~1\server\native\win\32\oci920_8;c:\program files\imagemagick-6.2.8-q16;C:\Program Files\Support Tools\;C:\Program Files\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\
java expects another option after space.
How do I make nodemanager not to append system path to server's java.library.path?
Is there a way to make node manager start server nodes with java.library.path value in quotation marks?
P.S. I'm running node manager as windows service. I saw a post that solves this problem by starting node manager from command line but this solution is not sufficient.Gediminas Aleknavicius skrev:
How do I make nodemanager not to append system path to server's java.library.path?Hi!
This news group is about JRockit. People here tend not to know that
much about non-JRockit products (like nodemanager). Try some WLx forum,
they should be able to answer your question!
Regards //Johan -
Problem starting adminserver with WLST and Nodemanager
I have a domain with one cluster containing 4 managed servers. Now I want to start the adminserver with WLST using the Nodemanager. (I know there are other/beter ways but in this situation I need to do it with Nodemanager).
The problem is that the Nodemanager doesn't add the right memory arguments to the start command of the admin server.
This is what I do:
nmConnect(usernaam,password,host,port,domain)
nmstart(adminserver)
This does start the adminserver only without the proper memory arguments.
I tried:
using a startup.properties file in the directory <domain-dir> \servers\<server-name> \data\nodemanager with the following arguments: -Xms1024m -Xmx1024m
and
Puting the memory arguments in the "Server Start" properties in the config.xml (This works fine for the managedservers)
How can I solve this?The nmstart command has a properties argument. Have you tried that?
nmStart([serverName], [domainDir], [props], [writer])
<Richard Greeven> wrote in message news:[email protected]..
I have a domain with one cluster containing 4 managed servers. Now I want to
start the adminserver with WLST using the Nodemanager. (I know there are
other/beter ways but in this situation I need to do it with Nodemanager).
The problem is that the Nodemanager doesn't add the right memory arguments
to the start command of the admin server.
This is what I do:
nmConnect(usernaam,password,host,port,domain)
nmstart(adminserver)
This does start the adminserver only without the proper memory arguments.
I tried:
using a startup.properties file in the directory <domain-dir>
\servers\<server-name> \data\nodemanager with the following
arguments: -Xms1024m -Xmx1024m
and
Puting the memory arguments in the "Server Start" properties in the
config.xml (This works fine for the managedservers)
How can I solve this? -
Problem Starting SAP with Oracle
Dear Experts,
Our production system rebooted due to some electricity issue and since then we are not able to start SAP. We are on oracle 10g and AIX OS. We have done all the options but no avail.
Following is screen output when I run command : "startsap".
startsap
Checking ABC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 700 - AIX v10.35 5L-64 bit 070123*
Usage: saposcol -l: Start OS Collector*
saposcol -k: Stop OS Collector*
saposcol -d: OS Collector Dialog Mode*
saposcol -s: OS Collector Status*
The OS Collector (PID 884754) is already running .....*
saposcol already running
Running /usr/sap/ABC/SYS/exe/run/startdb
Trying to start ABC database ...
Log file: /home/ABCadm/startdb.log
No SQLNet V2 connect to ABC available.*
Check that the listener is running: "lsnrctl status".
Start the listener as user oraABC: "lsnrctl start".
/usr/sap/ABC/SYS/exe/run/startdb: Terminating with error code 14
DB startup failed
prodserver:ABCadm 2>
Any help & advice to solve this issue will be appreciated.Hi Mark
As I am Novice user, however I have check /oracle/SID/ directory for .sapenv., .dbenv. files but I didn't find any file.
Then I have executed "env" command as a "root", Output is written below.
env
_=/usr/bin/env
MABCATH=/usr/dt/man:/usr/share/man
SESSIONTYPE=dt
DTDATABASESEARCHPATH=//.dt/types,/etc/dt/appconfig/types/%L,/etc/dt/appconfig/types/C,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
LANG=en_US
LOGIN=root
G_BROKEN_FILENAMES=1
PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/dt/bin:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
DTUSERSESSION=root-192.168.0.180-0
XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
SESSION_SVR=atpserver
LC__FASTMSG=true
WINDOWID=23068728
IC_DOCUMENT_SERVER_TYPE=STANDALONE
EDITOR=/usr/dt/bin/dtpad
LOGNAME=root
MAIL=/var/spool/mail/root
DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame
StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor
StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
IC_DOCUMENT_SERVER_MACHINE_NAME=standalone
LOCPATH=/usr/lib/nls/loc
TERMINAL_EMULATOR=dtterm
USER=root
AUTHSTATE=compat
SAPINST_JRE_HOME=/usr/java14_64/jre
XFORCE_INTERNET=True
DEFAULT_BROWSER=Mozilla
DISPLAY=192.168.0.180:0.0
SHELL=/usr/bin/ksh
ODMDIR=/etc/objrepos
JAVA_HOME=/usr/java14_64
DTAPPSEARCHPATH=//.dt/appmanager:/etc/dt/appconfig/appmanager/%L:/etc/dt/appconfig/appmanager/C:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
HOME=/
IC_DOCUMENT_SERVER_PORT=64111
IC_DOCUMENT_DIRECTORY=/opt/IBM/aix
XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
TERM=dtterm
PWD=/
TZ=INDST+5:30
XMBINDDIR=/usr/dt/lib/bindings
DTHELPSEARCHPATH=//.dt/help/root-192.168.0.180-0/%H://.dt/help/root-192.168.0.18-0/%H.sdl://.dt/help/root-192.168.0.18-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/etc/dt/appconfig/help/%L/%H:/etc/dt/appconfig/help/%L/%H.sdl:/etc/dt/appconfig/help/%L/%H.hv:/etc/dt/appconfig/help/C/%H:/etc/dt/appconfig/help/C/%H.sdl:/etc/dt/appconfig/help/C/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/dt/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%l/%t/%c/%N.cat:/usr/dt/lib/nls/msg/%l/%c/%N.cat
If you need I will send you output of "env" command as a "ora<SID>" & <SID>adm
Thanks for all your support -
Problem starting MySql with MAMP
I have installed Mysql 5.2 and the SqlPerPane in System preference shows the Sql server is running. I also installed MAMP to manage MySql but it start Apache but not Mysql. I get the following error:
100527 05:15:44 mysqld_safe Starting mysqld daemon with databases from /Library/Application Support/appsolute/MAMP PRO/db/mysql
100527 5:15:45 [Warning] The syntax '--skip-locking' is deprecated and will be removed in a future release. Please use --skip-external-locking instead.
100527 5:15:45 [Warning] Setting lowercase_tablenames=2 because file system for /Library/Application Support/appsolute/MAMP PRO/db/mysql/ is case insensitive
100527 5:15:45 [Note] Plugin 'FEDERATED' is disabled.
100527 5:15:45 [Note] Plugin 'ndbcluster' is disabled.
/Applications/MAMP/Library/libexec/mysqld: Table 'mysql.plugin' doesn't exist
100527 5:15:45 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
100527 5:15:45 InnoDB: Started; log sequence number 0 44243
100527 5:15:45 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist
100527 05:15:45 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended
Is there to MySql? any Idea how to manage the running one or how to fix the problem?MAMP includes both Apache and MySQL as separate applications. It won't manage another install of MySQL.
-
Problems : Starting up with CDE and Opening terminal window in JDS
Hi
I installed Solaris 10 GA on the system having 2.8 GHz Dual Xeon processor with EM64T.
Installation process was fine and completed. But, I have two problems with CDE and JDS.
Firstly, in JDS, the graphical login comes up, works fine. After I login (as root or anyone), sometimes terminal window does not start up correctly. The windows for terminal apprear, but there is no display. Thus, I cannot use the terminal in JDS, while the other menus on launch panel (e.g. StarOffice) seem to work properly.
Secondly, in CDE, I can login, the hourglass pointer appears and changes to arrow pointer. But then, there are no items except only the pointer and wallpaper.
Both problems do not happen at every login time. when the problems happen, I have to reboot (in CDE/JDS) or re-login (in JDS). After some rebooting or re-login, things work fine again.
Can everybody help me?
ThanksI am not Adobe staff, but I have never heard of an "online upgrade". When I purchased my CS6 upgrade from Adobe, they sent me an email with the serial.
Who did you go through to get this upgrade? -
Problem starting apache web server [SOLVED]
when i start apache manually (sudo /etc/rc.d/./httpd start) i just get a fail, but when i start it through webmin i get the following:
stty: standard input: Inappropriate ioctl for device
Can someone tell me how i can fix this, or if it is too hard to fix, give me the name of the next best http server available?i had problems with apache too, but then i just did some changes:
in httpd.conf i changed user from nobody to httpd;
then added to system user httpd via adduser httpd in group nobody and it worked well -
Problem start JavaService with JMX agent
My application start ok in console with password authenticate set to true. I have the password file configured correctly under my login account. however, when I start my application with the Windows Service created by JavaService, it failed with the authentication option. I am pretty sure it's the password file permission failed it. but don't know the workaround. Here is the setting for JavaService setting:
JavaService -install MyServer "C:\Program Files\Java\jre1.5.0_07\bin\client\jvm.dll" -Xrs -Xms67108864 -Xmx524288000 -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=8004 -Dcom.sun.management.jmxremote.authenticate=true -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.password.file=C:\JConsoleAccess\jmxremote.password -Djava.class.path=[JarFiles]; -start com.MyServer -params D:\MyServer\bin\Config.ini -stop com.ShutdownThread -current d:\myserver\bin -shutdown 90 -description "My Application Server"
Note: if I set authenticate option to false, it works just fine.Hi,
I think your problem might be due to a file read access problem due to the fact that you're running
a Java service probably as SYSTEM but your jmxremote.password file was created with another
USER and SYSTEM cannot read it. Run "cacls C:\JConsoleAccess\jmxremote.password" in order
to check the privileges of the password file.
Have a look also at "How to secure the password file on Windows systems?" in the JConsole FAQ:
http://java.sun.com/javase/6/docs/technotes/guides/management/faq.html#win3
Regards,
Luis-Miguel Alventosa - JMX/JConsole dev team - http://blogs.sun.com/lmalventosa -
Openbox, start Programm with key[solved]
Hi @ all
I have a Problem with Openbox , I will start gmrun after pressing the F10 Key.
I have write in the rc.xml this keybinding,
<keybind>
<action>
</keybind>
but when I press F10, nothing go on..
edit:
wtf.....
I can not write the action line, evry time after submit only <action> is there....
ok it looks like action name="gmrun"First, I agree with mucknert: that is not gmrun, it is a search field every gtk listview (or whatever it is called nowadays) provides by default.
Try the following to see if Openbox spits out any warnings:
Open a terminal emulator, execute `openbox --replace' in it and have a look at Openbox's output. It would also help if you could upload your rc.xml somewhere. There are also thousands of nopaste sites available where you could post your rc.xml if you don't have any webspace. -
Can't start OpenOffice with Gtk widgets from fluxbox menu
Hi!
I have changed my .bashrc file according to this: http://bbs.archlinux.org/viewtopic.php? … office+gtk and this http://bbs.archlinux.org/viewtopic.php? … office+gtk , but I have a little problem. If I start it from console it works, but if I start it from fluxbox menu, by the same commands ("soffice", or "soffice -writer", etc.), it has it's default look back. I'm using fluxbox 0.9.14 and OpenOffice.org 2.0.
Thanks for any advice.tomk wrote:
I've always been a bit puzzled by this, I have to admit. I have stuff in my .bashrc which works as expected in a terminal, but is not accessible through xfce - in other words, I can't use it in xfce's menu. My OOo export statement, on the other hand, is in /etc/profile, and it works fine. Try it there, and see if it makes any difference - remember to logout and login again.
Putting it in /usr/bin/soffice will work, of course, but the change will get overwritten every time there's an upgrade.
I'm no expert but I believe .bashrc gets read every time you open a new terminal, whereas profile gets read on startup . . . so profile is basically global, whereas .bashrc is mainly for virtual terminals. At least I have noticed the same thing, that .bashrc doesn't apply to window manager stuff. -
DISPLAY:=1 starts 800x600 with xgl [SOLVED]
Hey,
I've got a strange problem, I'm trying to use XGL with SLIM. The xgl part of it runs fine, all the effects and stuff work, all I'm doing is calling
exec startxgl 1 ati gnome
in my xinitrc for SLIM.
The problem is that it always starts in an 800x600 window in the top corner of the screen. If I call it on DISPLAY:=0 like so
exec startxgl 0 ati gnome
It starts at the proper resolution, but none of the effects work.... So I'd like to somehow get it to run on DISPLAY:=1 in the proper resolution... I think its just a config problem and not XGL...but I have been unable to find anything about setting resolutions for specific DISPLAYS:=X. Some how 0 is set properly. My xorg.conf is pretty simple...
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "dri"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "RV350 AR [Radeon 9600]"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Thanks!check /usr/bin/startxgl, and add -fullscreen to
Xgl :$xgldisplay -ac -accel xv:pbuffer -accel glx:pbuffer &
so it became
Xgl :$xgldisplay -ac -fullscreen -accel xv:pbuffer -accel glx:pbuffer & -
How to start working with BPEL[SOLVED]-but someone still can help me :)
Hello Everyone,
I'm Fizzz, I'm totally new to BPEL. I don't know where to start and how to start.
Right now I'm Working with JDeveloper 11g R1. I didn't go further yet but Now i have to create some BPEL Process that can be integrated to my Web Application. There are some transaction to be Approved or Canceled from BPEL and if Transaction is Approved then i need to Update that Transaction to Peoplesoft's Database. I have 1 week to learn it. and then i need to start my work.
But i really don't know where to start? What do i need? And how to proceed?
Can Anybody suggest me the steps that i can follow to get Start with BPEL and done with Peoplesoft connectivity?
I would really appreciate your help.
Thanks,
Fizzz...
Edited by: Fizzz on Nov 24, 2009 5:14 PMThanks user11082822 and Vivek..
Your Oracle Doc links are really very helpful. i would definitely go through these docs to get familiar with BPEL, But i have only one week to understand this part of technology.
So would request for any Live Example or How to's for Sample BPEL app creation and integration part of that. I would definitely read these document but i need some fast overview on these processes practically.
Can you please suggest me such things.
Thank you very much to both of you for your very quick and very helpful effort. :)
Fizzz... -
Problem starting HotSync with Antivirus Program in XP
Couldn't start my HotSync program, running XP.
Found that it had to be "approved" by my anti-virus program.
That fixed it.
Mackerel1
Post relates to: Zire 31Thanks for that information. What anti-virus program are you using? So if others experiencing what you have they know to do what you did.
Post relates to: Treo 800w (Sprint)
Maybe you are looking for
-
I want to transfer my remaining ITunes account balance from my IMac to my husband's IPad. He has a different Username and Password. How do I make the transfer?
-
Turn off authentication in mountain lion?
How do I turn off authentication in Mountain Lion?
-
How can I get Connection(Database Connection)on my backing bean
hello guys! How can I get the Database Connection on my managed bean? I want to use this connection for my reports. thanks a lot! alvin
-
How to Blend Image Edges with a Gradient
Hi All I've created a transparent gradient over an image. The problem I am having is that the edges of the image are visible beneath the gradient. I know how to correct this in Photoshop but I am having difficulty in Illustrator. How can I create a s
-
Xpressmusic 5130 with a alarm clock that will ring...
Currently, the alarm clock only allows me to set one time to ring. (Wake-up time) I am wondering is there any app to replace this alarm clock or I can use Carbide.ui Series 40 Theme Edition to change this property? Thanks Jack Solved! Go to Solution.