Problem starting XML Forms Builder

Hi
I have a SAP EP 6.0 SP2 Patch 28 portal where I newly implemented the how to guide "How To Secure Permissions fro Initial Content In SAP EP 6.0 SP2".
In this guide I need to create a new Content Manager role, due to a SAP Note 775117.
All this seems ok, but now I am not able to start the XML Forms Builder.
I am getting an error message that says something about the "Access is denied:com.sap.portal.system/applications/com.sap.km.cm/components/xfbuilder - security zone:medium_safety/Com.sap.km.cm"
I have tried out several ways, then the recommendation, of implementing to get this application to be loaded, but unfortunately - this does not work.
Have anyone else reach some problem regarding this issue??
Regards
Kay-Arne

hi
navigate to systemconfiguration security Zone and to the folder as specified and change the security zone to low safety .also check with acl editor
With regards
subrato kundu

Similar Messages

Problem in XML Form Builder development

I am developing some KM Navigation iView template with XML Form Builder . I create a label , when it be clicked , relative files will be download to local PC. But the caption of the label is the complete path of the file, not "file down" which I expected.
I need help, Regards.

Sonal,
You can check
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/fe743c74fa6449e10000000a11402f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
James

Problem in XML Form Builder

Hi all,
Can any one provide me any document related to FAQ in XML Form Builder?
i have created one project in xml form builder but not getting how to create iviews at admin side and user side.
Thanks in advance!
sonal.

Sonal,
You can check
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/fe743c74fa6449e10000000a11402f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
James

Problem saving XML Forms builder project

Hello,
I have extended my xml forms project with some functionalities and now I'm not able to save and generate it. When I'm trying to save the project saving process stops while saving 'GUIModel-Internal.xml' which is quite big file (~4MB). I can't find the reason which cause that.
I would be grateful for any ideas.
Best Regards,
Michal Maciejewski

Hi Fallon,
It was typicall extension with normal changes within the XML Forms Builder. I've added some nodes in Data Schema and then create some controls on Edit and Show form which I connected with the newly created nodes. I know that custom changes in .xsl file will be erased after opening and saving the project within the XML Forms Builder so I'm trying no to do that. Have you got any idea why the project is not saving properly? Is it possilbe that XML Forms Builder could damage some files of my project while saving? After several tries of saving Show form could not be load while opening project. It's quite urgent for me to find solution or cause of this issue.
Regards,
Michal

I want to design a News like the *LInklist* by XML Form Builder

Hello:
   Everyone!
   Now I have another problem about XML Form Builder
   I want to design a News like the LInklist by XML Form Builder
   I want the result,For Example
SAP News
       1news1
       2news2
       3news3
who can give me some adviseon about how to disign the Edit, Show and Renderlistitem in XML
Thanks a lot
Hope your help!

Hi,
In XML Form
1) Edit form is used for designing the user interface.
2) Show form is used for displaying the xml form to the end user
3) RenderListItem is used for rendering the xml form into a small description like 1News1, 2news2 etc..
    Here you need to display only the heading of the xml form
After you create the xml form
Create Layout set where you need to give the proerties like xml renderer form , no of items to display etc...
Thanks&Regards,
Raghu

XML Form Build Error Unexpected http response code 500: Error

Dear All,
I am facing the error when I am starting the XML Forms Builder.The tool checks the environment in which the XML Forms Builder is running (xfbuildertest.html)
I am getting the following result :
- Test: Connection Tests
- ! Test Failed !
- A test in the suite failed
- Test: XML Forms Builder Version
- ! Test Failed !
- Unexpected http response code 500: Internal Server Error
Test: Load Global Settings
- Not Started
- This test depends on the test "XML Forms Builder Version", which did not complete successfully
- Test: Load Project List
- Not Started
- This test depends on the test "XML Forms Builder Version", which did not complete successfully
Please help me.
Regards
Pravesh

Hi Lorcan.
So what exactly happens when you try to start XML Forms builder, do you get an actual error or does it just not start at all?
> Actually the News are not getting displayed . The HTML (Html tages)are not getting rendered properly in XML Form Builder.
This news are perfectly working in other environment (Dev/Qlty) but not in Production .. where i am facing the issue of rendering the news ( not in correct format as expected)
It is appearing as link. where as in my other environment the Text in proper HTML format.
(Link of News appearing in production) whereas in Dev/Qlty proper text with Heading/Font/Colour appears. Or are you only seeing errors when you run the environment check?
> I am getting the errors when running the environment check on in Production but not in Development/Quality.
Did you try it on different clients or with different users? Is this a new installation or have you recently upgraded? Are all your components on the same SP level?
> This is new installation but SP level are exactly same across the system(Dev/Qlty/Prod).
Also the check the settings and found proper..
Root Directory * /usr/sap/<System-ID>/SYS/global/config/cm/etc*
Please let me know am I missing something..
Why its not running on my production system.
Regards
Pravesh

XML Forms Builder - problem with checkbox

Hi,
I have created many checkboxes in XML Forms Builder and if I want to create a new document based on this "Form" I have still checked one of checkboxes. I would like to have all empty checkboxes becasue user should check the appropriate checkboxes.
Do you know how to resolve this problem?
Thaks for help!
Regards,
Andrzej Tabara

Hi,
is it always the same checkbox that is already filled in? Is this ckeckbox based on a metadata-definition?
If yes: You could maybe have a look at the metadata-definition. Is there maybe a default-value defined?
Kind reagrds
Karin

XML Form Builder-Problem with the save button

Hi All,
I created a project in XML Form Builder.
I included a button "Save" in my project.
All is working fine when i preview my project in XML Form Builder.
The problem is when i run my project with iview.
I suppose the form to save my input and then to be closed but
unfortunately it did not.
I don't know where the problem is as in the XML Form Builder everything seems ok.
Thank you for your help!
Regards,
Ari

Hi Carsten,
Thank you for your help.
There is no javascript error in the form.
In the status bar when i have my mouse over the button i can see "javaxcript:HrefSubmit('save',"");"
And when push the button "Transering Data..."
I created the form in the Xml Form Builder and in preview there the project works.
What do you mean "Did you access your Form using the KM Admin Explorer via a comman?"
How can i have acess there?
I appreciate you help!
Regards,
Ari

In XML form builder data schema not clickable

Hi ,
I have installed JRE version 1.6.0_07. When i click on xml foms builder ,it gets opened but when i click on data schema it's not clickable but icon is displayed next to data schema.I am not able to create any node in data schema.
Regards.
Adity.

Hi,
my problem is simular to Aditys: My Java Version is JRE 1.6.0_15. When I go to Content Managment --> Formbuilder, the XML Forms Builder starts automatically but it is not possible to open Data Schema. After downgrade to Java 1.4 I can not start the Form Builder, that means, after clicking on "Form Builder" in the Portal, a pop-up opens, but the XML Form Builder does not load.
Can you help me?
Jannis

XML Form Build Error Unexpected http response code 500: Internal Server Err

Hi
I have the following error message when i am trying to load XML Form Builder
"Unexpected http response code 500: Internal Server Error "
When i am trying to Run the test its shows me the follwoing error log.
Test Environment: XML Forms Builder Environment Check *
Start Time: 2008-09-17 15:09:53                       *
End Time: 2008-09-17 15:09:59                         *
- Test: Java Environment
- OK
-      Start Time: 2008-09-17 15:09:53
-      End Time: 2008-09-17 15:09:53
-      Java Runtime Version is 1.6.0_02
- Test: Connection Tests
- ! Test Failed !
-      Start Time: 2008-09-17 15:09:53
-      End Time: 2008-09-17 15:09:59
-      A test in the suite failed
     - Test: Download XML Forms Builder Jar
     - OK
     -      Start Time: 2008-09-17 15:09:53
     -      End Time: 2008-09-17 15:09:55
     -      Successfully loaded XML Forms Builder Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
     - Test: Download SAP XML Toolkit Jar
     - OK
     -      Start Time: 2008-09-17 15:09:55
     -      End Time: 2008-09-17 15:09:59
     -      Successfully loaded SAP XML Toolkit Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
     - Test: XML Forms Builder Version
     - ! Test Failed !
     -      Start Time: 2008-09-17 15:09:59
     -      End Time: 2008-09-17 15:09:59
     -      Unexpected http response code 500: Internal Server Error
     - Test: Load Global Settings
     - Not Started
     -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
     - Test: Load Project List
     - Not Started
     -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
Please let me know the how to slove this Problem.
Thanks
Mmukesh
Edited by: mmukesh reddy on Sep 17, 2008 9:29 PM

Hi Koti Reddy
That is not related to my issue.
Here this error only comming for two users in my group.
The environment every thing working for remaining user. But only that two users are facing the problem.
So please let me know is there any security issues.
Thanks
mmukesh

XML Forms Builder Errors after SP Stack 14 upgrade

Hello,
I upgraded development portal to NW04s SPS14 (from SPS11).
In XML Forms Builder, try to open my existing project but not succedd. I get the message "Operation Timeout".
"The current operation timed out and was aborted. This was caused by network communication problems . Some data may have been lost.try again later"
After click cancel, I get a second message:
"There are no projects stored on the server"
In KM content, etc folder, xmlforms , I can see all my projects !!!
Of course, no network problems exists.. portal is working ok, ...
I applied OSS note 1150307 - "Internal Server Error when accessing XML Forms Builder" but I have the same problem.
Any idea¿?
Thanks and Regards
Noemí Llano

Hello, I did a test...
from the same client machine ...(with JRE 1.6.0_03) I start XML Forms ....
with SPS11 portal, I can see the Projects.
With SPS14 portal, I can not see the projects
Thanks and Regards
Noemí

Behavior of XML Form Builder after SP 13 upgrade

Dear Experts,
We are working on E.P 7.0 SP 10 and we've recently applied SP 13 and started testing the system.
What we found on XML Form Builder is, we are unable to add schema (under Data Model) to the project.
Can some one help us where exactly went wrong.
Best Regards,
Satyadev

Hi,
i think, i have faced the same problem recently.
I had the problem that i saw the 3 categorys: namespace,data schema and properties.
But i couldn't open them by clicking on them. This is also your problem?
What i did with lots of hours of testing.
1.Once you have managed to add something to the data schema you are fine. Then it will always be opened. ( Try opening an existing project and you will see that.)
So you could open an old project and modify this.
2. It is still possible to open the Data Schema. I don't know where to click exactly but i click like 100s of times on the symbol of Data Schema and with a little bit of luck it opens. If it doesn't work, i restart the Forms Builder and i try again.
Regards,
Marcus

XML Form Builder does not load

I am having the following problem, when executing the Form Builder tool under Content Management, it does not load and i get the following error message:
CONNECTION ERROR: couldn't read response code*
And sometimes the window gets freezed.
I have read some previous Threads regarding this issue but the solution did not work to me.
Someting really strange is happening because if i log to port 80 (http://...) it works, but when I log to port 50000 (https://...) it does not, and that error message pops up.
I have alredy run the Enviroment check Tool and results were OK in both urls, as follows:
https://*****.net/irj/portal
Test Environment: XML Forms Builder Environment Check *
Start Time: 2006-12-05 13:12:48 *
End Time: 2006-12-05 13:12:04 *
- Test: Java Environment
- OK
- Start Time: 2006-12-05 13:12:48
- End Time: 2006-12-05 13:12:48
- Java Runtime Version is 1.4.2_13
- Test: Connection Tests
- OK
- Start Time: 2006-12-05 13:12:48
- End Time: 2006-12-05 13:12:04
 - Test: Download XML Forms Builder Jar
 - OK
 - Start Time: 2006-12-05 13:12:48
 - End Time: 2006-12-05 13:12:13
 - Successfully loaded XML Forms Builder Jar from https://***net/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
 - Test: Download SAP XML Toolkit Jar
 - OK
 - Start Time: 2006-12-05 13:12:13
 - End Time: 2006-12-05 13:12:47
 - Successfully loaded SAP XML Toolkit Jar from https://****/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
 - Test: XML Forms Builder Version
 - OK
 - Start Time: 2006-12-05 13:12:47
 - End Time: 2006-12-05 13:12:48
 - XML Forms Builder client version is 6.4.1, server version is 6.4.1
 - Test: Load Global Settings
 - OK
 - Start Time: 2006-12-05 13:12:48
 - End Time: 2006-12-05 13:12:48
 - Successfully loaded XML Forms Builder settings
 - Test: Load Project List
 - OK
 - Start Time: 2006-12-05 13:12:48
 - End Time: 2006-12-05 13:12:03
 - Successfully loaded project list:
http://*******.net/irj/portal
Test Environment: XML Forms Builder Environment Check *
Start Time: 2006-12-05 14:12:33 *
End Time: 2006-12-05 14:12:46 *
- Test: Java Environment
- OK
- Start Time: 2006-12-05 14:12:33
- End Time: 2006-12-05 14:12:33
- Java Runtime Version is 1.4.2_13
- Test: Connection Tests
- OK
- Start Time: 2006-12-05 14:12:33
- End Time: 2006-12-05 14:12:46
 - Test: Download XML Forms Builder Jar
 - OK
 - Start Time: 2006-12-05 14:12:33
 - End Time: 2006-12-05 14:12:23
 - Successfully loaded XML Forms Builder Jar from http://****.net/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
 - Test: Download SAP XML Toolkit Jar
 - OK
 - Start Time: 2006-12-05 14:12:23
 - End Time: 2006-12-05 14:12:27
 - Successfully loaded SAP XML Toolkit Jar from http://*******.net/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
 - Test: XML Forms Builder Version
 - OK
 - Start Time: 2006-12-05 14:12:27
 - End Time: 2006-12-05 14:12:28
 - XML Forms Builder client version is 6.4.1, server version is 6.4.1
 - Test: Load Global Settings
 - OK
 - Start Time: 2006-12-05 14:12:28
 - End Time: 2006-12-05 14:12:29
 - Successfully loaded XML Forms Builder settings
 - Test: Load Project List
 - OK
 - Start Time: 2006-12-05 14:12:29
 - End Time: 2006-12-05 14:12:46
 - Successfully loaded project list:

Don't know what can be, so if anyone has any idea it would be very helpful.
Cheers,
Ivan Milkovic

Hello,
Immediately after opening the XML forms editor from the Content Manager page, you will get a link Start Environment Check Tool.... Click on that and proceed for a check. It will take some 5-10 mins based on your connection speed.If every thing is successful, clear the browser cache and restart the browser and open forms editor again. It will open the data schema and properties filed and project browser and all.
I was having this problem just now and i resolved it with the above steps.
My JRE version is 1.6 and portal is EP 7 SPS 21 patched.
Regards
BP

Xml form builder- DataSchema not expanding

Hi Experts,
I am facing a strange issue in XML form builder.
When i am trying to expand DataSchema root node by clicking on the + sysmbol. It is not expanding.
Is there any particular setting or what for this. I have tried this many time but unable to expand data Scheme and not able to create any nodes under DataSchema.
Please help me in resolving this issue.

Hello,
Immediately after opening the XML forms editor from the Content Manager page, you will get a link Start Environment Check Tool.... Click on that and proceed for a check. It will take some 5-10 mins based on your connection speed.If every thing is successful, clear the browser cache and restart the browser and open forms editor again. It will open the data schema and properties filed and project browser and all.
I was having this problem just now and i resolved it with the above steps.
My JRE version is 1.6 and portal is EP 7 SPS 21 patched.
Regards
BP

Problem in xml form

Hi,
i have created one xml form using form builder...there are three views..edit, renderer list and show....then in portal, i created one iview using newsexplorer layout set for edit form and newsbrowser layout set for show form . My problem is...wich layout set i have to choose for getting rendererlist form? one more thing, before creating iviews, should i have to create any folder in km repository ? i am using ep 6 sp2.
regards
ram

Hi ram singh,
There are some steps that you could follow :
1. Create the XML FORMS using the XML FORMS Builder
 a) On Edit panel create your form that will be visible on NewsExplorer Layouset.
 b) On RenderList create how your form wil be visible on NewsBrowser Layouset.
2. Create first Iview for Admin:
 a) Set the layouset to "NewsExplorer"
 b) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
 c) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
3. Create second Iview for users:
 a) Set the layouset to "NewsBrowser"
 b) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
 c) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
That's all! Now you can create new items using the Admin iView, which will be storage on KM path that you had set on steps 2 and 3. When you open your User Iview will be show all xml files that exists on your "/MyFolderForXMLFORM".
There are some helpful links above:
How to create XML FORMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
Creanting XML FORMS
http://help.sap.com/saphelp_nw04s/helpdata/en/fd/bd016254946048a4d7a17c2aad7600/frameset.htm
Cheers,
Alcides Flach

Problem starting XML Forms Builder

Similar Messages

Maybe you are looking for