Problem staying logged into a wifi network

I am having problem staying connected to a wifi network. I logged on a wifi network, enter password, and it says it as connected to the wifi network. Then it kicks me off the wifi network that I am currently logged into. Any advice or comments?

I am having problem staying connected to a wifi network. I logged on a wifi network, enter password, and it says it as connected to the wifi network. Then it kicks me off the wifi network that I am currently logged into. Any advice or comments?

Similar Messages

  • Now that I updated my operating system my phone won't stay logged into my wifi

    SInce I updated phone to the new operating system it won't stay logged into my wifi anyone know what I need to do??

    ive just had the same problem, try pressing forgot your network and then switch your wifi off and then your phone and then type in your password for your wifi. it works for me now

  • So is any one else having problems staying logged in on wifi at home?

    So I decided to up grade my iPad. Bought the new one brought it home, now it spends more time searching for my wifi signal then any thing. Also does not let me no when I have new messages or when I send messages.
    Any ideas?

    Is this happening with one particular network or with all?  Make sure iOS is updated on the device.
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).

  • For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

  • Trouble staying logged into websites

    It seems that after updating to Yosemite and Safari 8, I'm having trouble staying logged into some sites such as Facebook and Netflix. I have the "keep me logged in" button checked too. After a couple minutes or so of browsing or watching an episode, it automatically logs me out. I even tried clearing the Cache on Safari but that didn't help.
    PS. Trying to post this thread, it told me that I was logged out. :/

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Anyway to stay logged into facebook on N97

    Anyway to stay logged into facebook so i dont have to keep logging in each time i use it, I keep my phone content to off for the homescreen but everytime i connect i have to enter details again to facebook to login.

    It seems to be an issue with some phones - My N97 is fine but my daughter has your problem - we are both on the latest v12.024.
    Try a hard reset - back up your data first
    George
    De Criminalised 0570817: RM-505_EMEA_EURO_QW1 Black on Vodafone

  • I can not get my ipod 4 gen to log into Free Wifi hotspots. It shows that it is connected but I have to internet activity. I was at several hotspot locations last night and could not get on any, but other people were. HELP.

    I can not get my Ipod 4 Gen to log into free WIFI hot spots. It shows that I am connected but I have no internet activity. I was in several hot spots last night and could not log in, other people were, but I could not. HELP!

    - Did the other users who successfully connected have iDevices?
    - Frequently you have to open Safari/a browser and agree to the terms and conditions of the wifi spot before yo can get to the internet.  Some wifi spots use Flash or Java to log on which the iPod (and other iDevices) do not support)
    - Have you tried resetting network settings: Settings:General>Reset>Reset Network Settings
    - Does you Ipod successfully connect at home?.

  • Safari... can't stay logged into sites after navigating away, or switching to/from other applications.

    Ok so I have a Macbook Pro(2009) with Safari Version 5.1.2 and I can't stay logged into websites. For example.... If I'm logged into facebook, I then navigate to google and then back to facebook, I will then be logged out. Now before you say it, yes, I check the keep me logged in buttons on sites and this is not even close to being exclusive to facebook, just merely an example. This also occurs if I stay on the web page I'm signed in on then open up, lets say, itunes. When I then go back to the webpage, I'm signed out again. This is rediculously frustrating. It makes safari completely unusable with any application or with multiple webpages. I usually love safari and never wanted to switch to any other browser but I don't think I can hold out much longer with this. Also, I'm not sure if theres any other info that someone would need to help diagnose this bug but let me know and I'll post it. Thanks for any help in advance.
    -frustrated safari user

    I, too, have this problem. I have used Macs for years and have never had this problem before. It has just started and I'm not sure if I did a Safari update recently which might have created the issue. From reading on-line posts, this apparently has existed for years and now it is just my turn.
    Firefox works fine; I stay logged in on Firefox 'forever' but I prefer Safari. If it continues, I'll be using Firefox.
    MacBook Pro; OS 10.6.8; Safari 5.1.5

  • Safari will not stay logged into Facebook/Pinterest/Fitocracy/etc. after Mavericks upgrade. How to fix?

    After upgrading to Mavericks, Safari now will not stay logged into any site that requires a username/password, such as Facebook, Pinterest, Fitocracy, etc.  I can log in and browse for a minute or so, then all of a sudden it is as if I am not logged in.  As an example, Facebook will require me to log in again, remember browser, and then I get the security warning email since I have that feature activated with Facebook.  It is as if Safari completely forgets everything.  I believe it has to do with the new iCloud username/password sync function...  How does this get fixed?

    Try deleting the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit and relaunch Safari.
    If you still have problems, try troubleshooting Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. I
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked

    My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore

    You could try this
    Temporarily disable security on your home network
    See if the iPad connects
    If it does then reset the security - with the same or different password

  • Problem in logging into SDM

    Hi,
    I am facing a strange problem while logging into SDM server in J2ee WebAS. After providing userid and password if i enter, it shows a message in the bottom that 'Attempting to logon into <server name>' for long time (more than a day) and not logs into it and remains in the same state until we close it.
    could anyone tell me what may be the problem.my userid and password is correct. pls guide me if anyone encountered this type of problem and solved.
    /points will be assured/
    Regards,
    Art Tech.

    A)
    are you able to login to Visual Admin tool?
    B)when you start the SDM GUI, one commend prompt window will open, could you let me know last few lins of that.
    1)     Access the  usr/sap/<SID>/<INSTANCE_NAME>/SDM/program directory.
    2)     Access  the this script file :
       (i)     RemoteGui.bat  (In Windows)
    C) if B) looks fine then
    I think the SDM password is wrong..
    do this way
    1.     stop SDM
    2.     open the commend prompt d:\usr\sap\J2E\JC00\SDM\program
    3.     type sdm jstartup "mode=standalone"
    4.     type sdm changepassword "newpassword=abcd1234"
    5.     type sdm jstartup "mode=integrated"   ( otherwise engine will not come up)
    6.     start SDM
    now try with SDM password  "abcd1234"
    Regards
    Shrdihar Gowda

  • Won't stay logged into google

    My iPhone five won't stay logged into my google account in safari. I've checked the stay logged in box but I only get about two
    Visits before it kicks me off. My company uses google calendar so I need to check it throughout the day to see what's going on.
    Ay ideas?

    Hello,
    I'm going to take a shot at this. I suspect Tiger is remembering the old settings that were initially entered when you had no password. I'm running Leopard, and the Internet settings are in a different location from Tiger. I believe you go to Applications->Internet Connect. Set up your connection manually, matching your router's settings. If this doesn't work, or the settings still don't stick, then I'd suggest deleting the settings for your router, and then re-adding it with the correct info.

  • Logging into Optimum wifi hot spots

    Is there a way to let the iPhone log into the optimum network everytime without having to re-enter the user name and password each time?? Unless I access Safari (and am accessing email or facebook ...) I do not realize why the iPhone is not connecting because it is showing wi-fi at the top instead of edge.

    Hey sandm24469,
    The iPod touch may have an incorrect password saved. Try Forgetting the Network or Resetting Network Settings on the iPhone, go to Settings> General> Reset> Reset Network Settings.
    -Jason

  • Since downloading the update for Firefox 3.6.10 all websites that I previously stayed logged into must be logged into everytime I open them. Why? And can this be fixed?

    This has happened with previous Firefox updates but only after the initial update. Once I logged into websites such as facebook, yahoo, hotmail etc. I stayed logged in and was able to access these sites without having to log in each and every time. I have checked all boxes on these and all other sites to remember passwords and to keep me logged in and I still have to log in on each new visit. I rebooted my computer and this did not help. I made sure that Remember Passwords was checked on the Security tab under Options in the Tools for Firefox.

    How can Mozilla be contacted to report this problem directly to them instead of posting to a forum?

  • I cant log into my linksys network

    I have a PowerBook G4 with an installed AirPort card
    but, when i try to log into my Liknsys wireles network, it says the passowrd is incorrect...
    though i know its correct because my sister can log in to the same network via her mac powerbook
    please help! i need it!
    ~nick...

    The process will be detailed in the Linksys manual for your router.
    I suspect your problem lies with the WEP key.
    One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
    In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
    The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
    One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
    Though sometimes not even that works and the HEX key must be used regardless.
    AirPort: Joining an encrypted wireless network
    http://docs.info.apple.com/article.html?artnum=106424
    Choosing a password for networks that use Wired Equivalent Privacy (WEP)
    http://docs.info.apple.com/article.html?artnum=108058
    iFelix

Maybe you are looking for

  • Is my PHP + Oracle9i + Instant client setup ok ?

    Hello I have to developp a script in PHP for windows, using an Oracle 9i database. Here's my setup : Windows 2003 Server R2 (all patches applied) PHP 5.2.0 Oracle 9i 9.2.0.1.1 Instant client 10g 10.2.0.2-20060508 Oracle9i was installed in C:\oracle\

  • There is no "performance" tab in Preferences

    I just watched the new YT video about "hidden gems in lightroom CC" I am keen to try these new features, so I updated to v5.7.1 and I can't see these improvements. There is no "auto" in Catalog Settings\Standard preview size and there is no "performa

  • I can't update Adobe Photoshop CS6 from help update as update is disabled?

    Here is my config... Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64 Operating System: Mac OS 10.8.3 System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2,

  • Package import ncsa.j3d.*; does not exist

    Hi, i'm working on a 3d game for my fyp and am haveing trouble importing the package import ncsa.j3d.*; and the package import ncsa.j3d.loaders.*; Net Beans keeps giving me an error saying package import ncsa.j3d.*; does not exist and package import

  • TS440 / LSI 9240-8i RAID 5 not possible

    Hello, I´ve received our TS440 with the built in LSI MegaRAID card. I am able to see all 3 drives - but I am not able to get RAID 5 up and working. Is this something which has to be licensed first? Firmware has been updated to the latest one yesterda