Problem syncing image files after OS5 upgrade.

Lost all my image files with upgrade. Do not use Touch for Music, movies, podcasts - just images and a few apps. Tried restore to factory settings so now also lost my apps! I am trying to sync using Itunes>Photos>All folders but after about 15 mins just have the folders in the Touch but no images content. Sometimes the sync just stops and message says session ended - other times it just does nothing else. If I try to sync a specific folder then that seems to work but all images are duplicated into a Photo Library which I do not want.
Looked to downgrade but seems I cannot do that.
Any ideas?
Thanks.
Brian

Alas, it didn't work. Instead of trying a shortcut, I followed the steps as closely as possible. The end result was that iTunes did not recognize any songs.
I think the problem is that the Mac immediately registers the pc .xml file as an "OmniOutliner" file instead of an HTML file. I ported the file three different ways: pc-to-mac, attached to e-mail, and burned to a CD. OS X immediately identified each as an OmniOutliner file. My guess is that the iPod treats the .xml file slightly differently, allowing the pc .xml file to cross properly with the iPod as an intermediary. (Although the article you pointed me to did not specifically say this would work cross-platform.) Unfortunately, I have a iPod Mini, which can't carry 28 gigs of music.
At this point, it seems to me, I can either buy a new iPod to try to port the .xml file, or load both xml files up in an HTML editor and manually update the OS X version, or forget it. I leaning toward the latter.
Thanks for pointers. It's always challenging to try something new.

Similar Messages

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Signature Scribble field not retaining image file after saving

I have 2 issues with my PDF dynamic file I sent out
1) The add/remove controls is adding a random amount of extra blank rows upon saving the PDF
2) The image files selected for the Signature Scribble field is not retaining the image file after saving. It also doesn't give an opportunity to actually draw in a signature.
I even tried to use the Subform Instance Controls Insert/Remove/Move in my table, but I keep receiving the error "You have reached the maximum number of items allowed"
I would appreciate any help you can give me! I have been farting around with this for too long.
Thanks!
Rhonda

Thanks Pat. Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped. Uninstalled Reader and Flash as well. Strange thing with Flash, one of my online broker programs provides streaming of CNBC. When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash. I did, and it loaded again with no mention of Flash having already been installed.
Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE). Expanding the window in WE makes it large enough to read. I would still like to find a way to open the files as they are designed to open.
I have done all of the Adobe updates as they have been presented. Microsoft updates load automatically, and restart my computer in the process. I do not look to see what the updates have been. I figure if there was not a need, Microsoft would not make the updates.
[private data removed]

Notes has stoped sync with icloud after I upgraded to 7.0.2?

Notes (on my iPhone and iPad) has stoped sync with icloud after I upgraded to 7.0.2. All others items like Contacts, Calendars, etc. are able to sync. any solutions.

Now iTunes won't open. It doesn't give me any error messages it just won't open the window.
some preliminary questions aimed at narrowing in on possible culprits.
(1) do you have Norton Internet Security 2005 installed on the PC?
(2) try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)
(3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

Problem store pdf file after downlod , message memery or store to little, the harddrive hav 1,3TB ;-

problem store pdf file after download from web. Message, store to littel from reader11. Where ist tht problem or the solution?
thanks

Dear Mr Willener
Thanks for the mail, that problem is soluted, press the botton, store as copy.I found it in secound read
A wish: In reader 9 is the solution better.
Regards from Ilmenau
L.Gleichmann
[signature and auto-quote removed by host]

After os5 upgrade the iPhone battery drains in 1 hr

after os5 upgrade the iPhone battery drains in 1 hr? Gets very hot also

And I should mention that I took the foll steps so far:
1. Let the battery drain out completely and charge it overnight
2. Backed the phone, then reset the phone and restored from backup.
3. Took it to the apple store and they did a different kind of restore but no luck
The only thing left for me to try to is to reset it to factory setting unless some one can suggest some other way.

Help - Itunes no longer syncs with iphone 4 after OS5 upgrade

After the the upgrade for Itunes and the OS5 upgrade for my iphone, itunes no longer syncs my phone. Help?

Make sure that the password for the MobileMe account is still entered in on iCal.
Look in iCal under preferences, accounts, account information

Problem downloading JAR files after PIX 7.2(3) upgrade

Hello, I have upgraded a PIX 515 Firewall from Version 6.3(4) to
7.2(3) and am now experiencing problems downloading .jar files from
some web servers. I have tried disabling the "inspect http" option but
still not joy. I also tryied this:
http://www.cisco.com/warp/public/110/pix-asa-70-browse.pdf
But no luck.
Have anyone had similar problems.
Thanks in advance.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Settings>General>Reset>Reset All Settings

CS3 Extended having problems opening image files.

I had a CS3 Master Collection from The Art Institute forced us to buy that I had never opened because Photoshop 7 worked fine & I didn't need all the other crap that came with CS3 in the Master Collection. So I had been using Photoshop 7 for years & years, but when I got a new computer, Photoshop 7 didn't work anymore. If you can't tell me what's wrong with CS3, maybe you can tell me how to get my old 7 working on 64 bit windows?
Getting this stuff out of the way:
*Brand new computer, Windows 7 Pro, 64 bit.
*Adobe Creative Suite 3 Master Collection, installed about 3 months ago.
*CS3 Extended was working just fine for 1 or 2 months with no problems.
*Problem: CS3 stops responding or hangs exsessively when opening image files.
*Already tried alt/ctrl/shift reset.
*Already deleted all the printers.
*Already tried the tilde in front of the TWAIN.
*This Master Suite takes like 3 hours to install, so reinstalling is something I'd rather avoid.
*Yes, it's updated.
*Yes, the licence was renewed.
PSE Error Log:
2011:06:05 23:52:09 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:53:08 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:53:55 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:54:19 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:54:54 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:05 23:54:54 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:05 23:54:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:55:02 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:05 23:56:22 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:56:49 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:57:17 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:58:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:58:17 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:58:43 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:59:51 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:00:34 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:00:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:01:26 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:01:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:02:18 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:02:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:03:21 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:05:20 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:05:33 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:06:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:09:33 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:16:38 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:20:43 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:22:23 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:23:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:25:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:31:55 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:34:05 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:35:05 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:37:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:38:31 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:39:38 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:40:06 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:40:45 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:41:12 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:41:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:42:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:44:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:44:31 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:46:09 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:46:47 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:48:18 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:51:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:51:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:54:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:56:09 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:56:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:57:16 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:57:36 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 03:22:50 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:17 02:18:38 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:17 02:18:38 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:17 02:19:00 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:01 05:01:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:01:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:01:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:01:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:03 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:04:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:10:44 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:13:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:03 22:18:39 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:18:39 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:26:03 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:26:03 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:26:49 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:28:02 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:28:02 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:28:29 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:04 21:18:10 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:04 21:18:10 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:05 15:49:01 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:05 15:49:01 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed

Terabyte drive. 80% free space.
Yeah, I reinstalled. Can't believe I had to go through 4 discs to reinstall one program for the suite.
Reinstalling windows is overkill when" error check," & "SFC /scannow," & "boot repair" are sufficient.
Found out that it WILL work if you don't have a browser window open, but I like to listen to stuff on the net when using photoshop. I dunno why the browser makes photoshop refuse to open or create new images, but it would be helpful to know.
Also, despite not having a printer, the error log seems to indicate that it's part of the problem.
Oh, I forgot to mention that I did defrag after reinstalling. I know someone will bring it up if I don't.

Problems with loading mailbox after GW8 upgrade

I just recently upgraded to Groupwise 8 in a school district. I support many school districts and this is the first time I've had this problem. Users are complaining that from outside the network(home access) that when they log in to web acc, the mailbox will just hang at "Loading...."
The toolbars, menus, and folder list all display properly, but it hangs trying to load the message list for the mailbox. It works fine when on the internal LAN, only happens from home. And the problem is not constant - sometimes it will work, sometimes it will not. I've had users complain about the issue from the entire spectrum of web browsers, from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp internet files and still have the problem.
I do see a java error on the logger screen, I'm not sure if its related:
com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
The only reference I could find to the above error on these forums(or anywhere for that matter) was in the following thread:
http://forums.novell.com/novell-prod...unloading.html
Which doesn't describe the problem I am having....
Has anyone else seen this problem or have an idea what to check?
Thanks in advance for any help
-Rich

John Cunningham wrote:
> I'm getting exactly the same error after my upgrade from 7.0.3 to 8.0.1.
> WebAccess 'kinda' works: you can log into it but there are java (Tomcat,
> I presume) errors on the console:
>
> Novell GroupWise WebAccess
> Version 8.0.1
> (C) Copyright 1993-2009 Novell, Inc. All rights reserved.
>
>
> <GroupWise WebAccess> WebAccess Servlet is ready for work
> Sep 4, 2009 6:45:49 PM org.apache.jk.common.ChannelSocket init
> INFO: JK: ajp13 listening on /0.0.0.0:9010
> Sep 4, 2009 6:45:49 PM org.apache.jk.server.JkMain start
> INFO: Jk running ID=0 time=0/85 config=null
> com.novell.webaccess.providers.gwap.GWAPException at
> com.novell.webaccess.providers.gwap.XGWAP.xlatAvai lableDictionaries(U
> nknown Source)
> at com.novell.webaccess.providers.gwap.XGWAP.xlatMess age(Unknown
> Source)
>
> at com.novell.webaccess.providers.gwap.XGWAP.itemRead (Unknown
> Source)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.
> java:39)
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAcces
> sorImpl.java:25)
> at java.lang.reflect.Method.invoke(Method.java:324)
> at
> com.novell.webaccess.providers.gwap.XGWAP.dispatch ServiceHandler(Unkn
> own Source)
>
>
> . . . you get the picture.
>
> I've re-installed the WebAccess Application from scratch, no diff.
>
> Users can log into it, but when they open a message they get a dialog
> box "Unable to process request. Please contact your system
> administrator." Then it displays the email message but it does not mark
> the messages as read in the main browser window.
>
> Besides that, Tomcat has crashed on me and hung completely, requiring me
> to reboot the server.
>
> I've spent a lot of hours trying to get this resolved.
>
> The WebAccess agent is on another (clustered) node. The WebAccess
> Application is installed on a single NW65SP7 server (i.e. not clustered).
>
> Any suggestions would be greatly appreciated.
>
>
> rpf2 wrote:
>> I just recently upgraded to Groupwise 8 in a school district. I support
>> many school districts and this is the first time I've had this
>> problem. Users are complaining that from outside the network(home
>> access) that
>> when they log in to web acc, the mailbox will just hang at
>> "Loading...."
>>
>> The toolbars, menus, and folder list all display properly, but it hangs
>> trying to load the message list for the mailbox. It works fine when on
>> the internal LAN, only happens from home. And the problem is not
>> constant - sometimes it will work, sometimes it will not. I've had
>> users complain about the issue from the entire spectrum of web browsers,
>> from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp
>> internet files and still have the problem.
>> I do see a java error on the logger screen, I'm not sure if its
>> related:
>> com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
>>
>> The only reference I could find to the above error on these forums(or
>> anywhere for that matter) was in the following thread:
>> http://forums.novell.com/novell-prod...unloading.html
>>
>> Which doesn't describe the problem I am having....
>>
>> Has anyone else seen this problem or have an idea what to check?
>>
>> Thanks in advance for any help
>>
>> -Rich
>>
>>
fuplivsyr

Problems with VMWare Fusion after MacOS Upgrade

Prior to upgrading yesteday I was able to use "open with" to select programs that were installed in either my Win 7 or XP VM on VMFusion. After the upgrade no longer set any of the Win apps. This is a real pain a now i have to open Fusion, Win 7 and use the Office 2010 app to open the file.
Has any one else had this problem? Is there something I can do to fix this?

Hi cjpembo,
my Card looks like:
01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
If I don't specify any module parameters, the tuner type 0 is selected.
ACPI: PCI interrupt for device 0000:01:07.0 disabled
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
Badcel
Last edited by badcel (2008-08-24 09:46:18)

Lost files after Tiger upgrade.

My problem: All music files dissapeared from iTunes but still now retrieved from elsewhere on the drive, all vCards are now vanished completely, all photos gone from iPhoto, now luckily retrieved and imported back. All filed mail gone from Mail, now suddenly vanished still after retrieving and reimporting. Also mail account settings suddenly gone. I know I have myself to blame for not backing up, but why the h... is this happening? Also a lot of my settings is "being ignored" after restarting. What has really happened? How can I retrieve? I connected my iPod 4GB and turned it to manual, could it be the cause? Tried to download all my pics to it, but there was no dialogue window. Except the nogo sign on the iPod. Which I had to ignore after an hour. ALL of THIS happened after a SUCCESSFULL upgrade to Tiger. ALL my files were initially intact. IS the iPod the sinner here?

There are some good reasons there to backup first, and to do some basic repairing and maintenance before any upgrade. Pick up a good Firewire drive to hold 2x what you think you need.
Try using Disk Utility 10.4.6 DVD or fsck to repair your drive and then do a Safe Boot.
You don't say if this was 10.4.8 update from .7, or something else, but I would recommend only using the standalone and combo updaters. And never use your Mac while updating, and always do a restart before the update (ideally having repaired the drive first anyway).
This 42-page guide is designed to introduce some techniques, routines and habits that have a pretty good track record for quashing the most common OS X problems. available MacFixIt subscribers.
Mac Pro 2GHz 2GB WD 10K Raptor; MDD G4 Mac OS X (10.4.8) APC RS1500/XS1500; Vista

[SOLVED]Problem with logging in after system upgrade

Hi,
I'm encountering some problem after rebooting my machine just after last upgrade. Few minutes ago I was sure I found the source of the problem when system hang on "Reached target Graphical Interface" message. Reason - nvidia drivers had to be replaced with legacy version (https://www.archlinux.org/news/nvidia-340xx-and-nvidia/). But it didn't help. Also it made things a little bit worse. Because now my system uses nvidia-340xx and it seems drivers are fine but when login screen of lightdm should appear screens stay blank... and nothing happens. I simply can't do anything.
What I noticed is also xfce4-session was upgraded (4.10.1.3->4.10.1-5) and maybe this is the separate problem? but I can't downgrade this package as some time ago I removed all contents of /var/cache/pacman/pkg.
What I have is arch on pendrive so I can chroot into existing system.
Any ideas?
Last edited by jakub (2014-10-08 22:09:02)

I found something similar to line
(EE) Mar 07 14:05:07 NVIDIA(0): WAIT: (E, 0, 0x837d, 0)
these values are not exact as I'm too tired now to rewrite the real ones from screen
maybe I should install some older nvidia drivers (these 340xx are broken somehow I think). Unfortunately I don't have my /pkg content anymore.
Where can I download packages like nvidia-340.32-1-x86_64.pkg.tar.xz from? (according to pacman.log I had this version back in July and it was working fine I think).
I could also start X with Nouveau drivers but not xfce (anyway I would like to install old nvidia drivers back)
Last edited by jakub (2014-10-08 22:03:11)

Problem in Dimension File after securing Dimensions

Hi,
Why is there an error message "There is a problem in dimension file : ACCOUNT" in BPC for Excel if i do a "secure" and "R/W" on ACCOUNT dimension?
Actually this error message seems to happen to every dimension except for "Category" and "Entity", any idea why?
Cheers

Hi,
I do not believe that you can secure the Account dimensoin in BPC 5.1, you should however be able to secure all the other dimensions.
Can you please check if you have updated your Member Access Profiles after securing a new dimension. You need to add this new dimension to your Member Access Profile (for each applicaiton where the dimension is used), otherwise you will get error message in the Excel Front-End.
Regards,
Marcel

Problem in Predefined Properties after SP14 upgrade

Hi,
we are facing one Problem after the SP14 upgrade in the Development environment.The Problem is as follows:
Actually we have defined some Predefined metadata Properties which give us option of country and Locality while uploading any Document.The Property of Country and Locality are Interlinked and whenever user check the country checkbox (Like China) the interdependent Locality List appears (like Shanghai).But after SP14 upgrade whenever we are clicking the country checkbox the Loclity checkboxes are not appearing.(Even though some processing happens).I have checked all the configuration under System admin >Global services> Property Metada -->Group and Properties.Property Structures -->Property Groups etc and match them with all the properties of that in the Production environment.But we don't find any property missing like Dependencies etc.
Is there anything else we need to check?Anybody of you have faced the same Problem earlier?
Please Help It is urgent
Regards
Imran

Dear Imran,
we dint migrate the properties to the new server.
we have created those properties again in our new server.
I am using those properties for two purposes
1.to refine the search ,adding them in the search option set.
here i am able to see the all properties and there dependedncy .
its working fine.
2. while uploading the documnets.
I created a metadata group mapped those properties to all groups.
all process as we have done in our old server.
here i am able to view all the properties except 1.
for ex country and city
I am able to see the property country ,
but the property city is not visible only .
where as i can see both the properties in search and working as desired .
If the problem is with patch,then it should either not work in the search also.
can u please suggest me on this .
Thanks in advance
Regards
swetha pola

Problem syncing image files after OS5 upgrade.

Similar Messages

Maybe you are looking for