Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

Hi, William
My question is if you can help me and support me to configure the Blink Pro App, I have a Mac Book Air, OS X 10.9.1.
hope for your answer

Similar Messages

  • Fetchmail: Server certificate verification error

    I'm using fetchmail to fetch our mails from our ISP. After upgrading my server from 10.3.9 to 10.4.8, fetchmail is logging the following four lines for each poll:
    fetchmail[39]: Server CommonName mismatch: *.mail.my_isp.com != pop.my_domain.com\n
    fetchmail[39]: Server certificate verification error: unable to get local issuer certificate\n
    fetchmail[39]: Server certificate verification error: certificate not trusted\n
    fetchmail[39]: Server certificate verification error: unable to verify the first certificate\n
    Here is the syntax of my .fetchmailrc:
    set syslog
    set daemon 60
    poll pop.my_domain.com timeout 900 proto pop3 user "user" with password "password" nokeep fetchall is localuser here
    I'm not using SSL here, so why is fetchmail mocking?
    Any help is welcome
    Thanks, Gerd
    XServe G4   Mac OS X (10.4.8)  

    Gerd,
    Don't know which version of fetchmail comes with 10.3.x and 10.4.x respectively.
    However, older versions would check for an SSL certificate in an opportunistic way and still go ahead if there wasn't one. More recent versions will interrupt comunications.
    In other words, since you do not use SSL you must disable it in fetchmail. If I remember correctly (not 100% sure), you must add:
    sslproto ''
    to .fetchmailrc
    Alex

  • SSL Certificates Update Error in ACE 4710

    Hi,
    I am facing a problem while updating the SSL certificates in ACE 4710. Our certificate is expired and we have purchased a new certificate from CA. Moreover the common name of the certificate is also changed.
    I tried importing the certificate to the repository and change the SSL proxy likewise to use the new certificate. but still the new certificate with new CN is not recognised by the clients. they can see the old certificate only. I even tried deleting and creating a new ssl proxy service with the new cert and attaching it to policy map.
    but still the new certificate is not used even after a reboot,
    Attaching screenshots and running config. Any help will be appreciated.
    BR//Rajiv

    Ravi,
          Here are the procedures for updating your certificate on the ACE. 
    1) Create New RSA Key
    2) Create CSR
    3) Send CSR to CA authority for a new certificate
    4) Import Certificate into the ACE
    5) Change the ssl-proxy to use the new Certificate and Key
    6) Remove the SSL-Proxy from the policy map and reapply
    Now if you created the CSR on a different box, you will need to import both the RSA key are the certificate.  Another thing you should be aware of is a possible change in the Root and intermediate certicates that are used by the CA.  In your configuration, you have
    crypto chaingroup iotms-chain-gr-1
      cert inter-root-new
    Is the the correct certificates for your cert?  If so, it seems odd that there is only on certificate in the Chaingroup.  Most CAs use an intermediate and and a root certificate. 
    Verify that you have the correct chaingroup (with the correct root and intermediate certificates). 

  • Webservice with SSL Certificate givivg error

    Hi all,
    I am configuring an abap webservice with client certificate
    I had
    1) installed the sap cryptographic library.
    2) created SSL Server PSE in transaction STRUST
    3)imported the certificate response by CA.
    4)Exported the certificate to local computer.
    5)Added the certificate in mmc under trusted certificate authority.
    but when i am running the endpoint url, i am getting folllowing error
    Error Code: ICF-LE-https-c:800-l:E-T:-C:5-U:4-P:4-L:7
    HTTP 401 - Unauthorized
    Your SAP Internet Communication Framework Team
    Please help me on what step i am missing.
    Thanks,
    Anshul

    You can add FOR TEST your pi userid & passw into enpoint url, like follow:
    &sap-user=<userid>&sap-password=<passw>
    Example:
    http://sapi.sap.com:50xxx/sap/xi/.....&sap-user=donald&sap-password=duck
    ps. Create a Service User into PI System for this. Regarding Role, i'm not a security guru, but i think that SAP_BC_WEBSERVICE_PI_CFG_SRV or SAP_BC_WEBSERVICE_ADMIN roles can be enough for this purpose.

  • Office Web Apps Server SSL Certificate

    Hi
    I am deploying Office Web App Server for Integration with Lync 2013. I opted for secure communication with SSL Certificate. I want this server available to internal and external users.
    I am little confused over CA for Issuance of SSL Certificate. On most of the forums, I found SSL Certificate to be issued by Internal CA. If so, will this also work for external users?
    If not, then plz guide me for Generating Certificate Request on Office Web App Server to be submitted to External CA for Issuance of Certificate.
    Regards.

    Hi,
    Thanks for your posting in this forum.
    I have moved this thread in Lync Server 2013-Management, Planning, and Deployment forum for more dedicated support.
    Thanks for your understanding.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Problem with configuration in Pro CS6?

    Hello, I have a problem starting the program
    when I open the program I get an error that says "configuration error" and will not let me open the program appears
    asks me to reinstall the program to go with it and use it
    reinstall the program and it works fine until I try it a few times and after 2 days I stop working (sometimes less or even not working)
    Do not know why this problem occurs and how to fix it
    Can anyone help?
    regards
    here the screenshot:
    Gyazo - c0951f226f4aa9bea3abc07207bff865.png

    I was just being sarcastic. I knew it is a feature while searching for a way to fix the issue awhile back. I am very interested in knowing if any user out there could somehow fix the problem by reseting, reinstalling, etc. I got an update a few hours ago, and that didnt fix it either.
    I have tried a lot of suggestions, and the only one seems to be working for me is to turn on "Scrubby Zoom"
    Noel,
    I run Adobe CS5 on MBP 10.6 and CS6 on MBPr 10.8. No additional plugins, English US keyboard. The laptops come with standard configuration... nonetheless, they both have the same issue.
    I am sure my computers have different settings from others, but this issue does not seem to be isolate as there are other users have experience it too.
    I personally, don't think it is too hard to re-create.  Most likely happen when
    1. Hold down space+command to zoom in
    2. Release keys, then hold down space and start moving around
    3. there you go, "bird's eye view" comes
    One thing I notice is that the problem does not occur all the time.
    -B

  • Problem with importing and creating self signed SSL certificate

    Mac Pro, 10.7.2 Server.  Attempting to import or create a self signed certificate for use as ichat.domain.com to encrypt iChat service.  Server is acutally called server.domain.com but has an alias of ichat.domain.com.  I understand that this is probably not best practice but I would like to keep things this way since we have one server, run multiple services on it, but want to continue to connect to each service at SERVICE.domain.com.  We have been using this type of mismatched certificate with success since 10.4 or so.
    I am working through setup of 10.7 Server to replace our 10.6 server. 
    Tried upgrade of 10.6 to 10.7 installation.  The installation made a mess of some services and our Open Directory, but did move the certificate over and allowed iChat service to function properly.
    Clean install and setup of 10.7 Server.  Exported self signed certificate, private key, and encryption password from 10.6 Server and functioning 10.7 upgraded Server.
    On import or manual creation of certificate get the following error:
    Error
    Check your server's logs for more information.  The error (code 5001) was: Expected SecKeychainItemImport to return a SecIdentityRef, but it did not
    Log shows:
    Dec 29 17:56:55 server servermgrd[498]: -[CertsRequestHandler(HelperAdditions) importP12Data:passphrase:error:]: importedItems = (
                  "<SecCertificate 0x7fcf6ed43c00 [0x7fff78d96f40]>"
    I have tried importing and manually creating other certificates with a variety of names with success.  I assume that there is something buried somewhere that is causing this particular one to be a problem.  Other than manually removing any remnants of the certificate from /etc/certficates I do not have any ideas what to try.  I am essentially ready to move this server to 10.7 except for this problem and would like to avoid a reinstall.
    Suggestions?
    -Erich

    Take a look here.
    https://bbs.archlinux.org/viewtopic.php?id=146649
    Maybe it's a problem with your network.

  • I am facing a problem in downloading the free apps as it says verification required. when i press to continue and puts my password, it again ask foraccount details.where i am opting payment type none and then updating other requirment...and it is then ask

    please help in downloading the free apps from apple store as i could not find the postcode of Dubai as it is a nessary step to complete the account.

    You still have to have a payment method registered even to download free apps.

  • Dreaded "must be configured to use a valid SSL cert" - 2008 R2

    Hello everybody,
    I've been browsing through hundreds of topics on the dreaded "The RD Gateway server must be configured to use
    a valid SSL certificate" error using BPA (Windows Server 2008 R2 Std), but still haven't found a proper solution.
    Here's the issue: RDGW not operating properly and sometime accepting connections, sometimes not. 
    I have an external domain example.com and internally, the domain is example.local. I have one server serving Exchange and RD, this is the server responding to mail.example.com and I have an StartSSL issued cert for mail.example.com, which is properly configured
    on the server (OWA is working properly with autodiscover etc.). SSL bindings seem alright, default site is using the mail.example.com SSL cert.
    If I open the RDGW Manager and go to the SSL Certificate tab, the system looks happy by having the cert installed, everything looks fine. Sometimes I even manage to connect - connection is successful, I can normally connect to any of the servers or computers.
    On a second attempt, I just get the message, that the logon attempt had failed. If I run BPA on the server, I get the error of not having a proper SSL cert. If I select a self-signed cert, then also the BPA goes through, but then I have problems with connections
    since everybody would need this cert to have installed.
    From what I read, my problems are related to the issue that the FQDN of my server is servername.example.local and the cert is issued to mail.example.com. How can I make the thing only to talk via the mail.example.com cert? I don't think I can get a cert
    that'd also contain a SAN of servername.example.local from the CA.
    What can I do?

    Hi Andrej,
    Thanks for posting in Windows Server Forum.
    Here providing you the article for BPA’s configuration logs, where you can check. It also states that certificate are main problem related to this error. Please check certificate which you have bound have FQDN name of gateway server, the certificate is SSL
    certificate and it’s a trusted certificate. Also check that certificate which you have importing to RD gateway must be in local computer/personal store. For more information refer below article.
    1. Using the Remote Desktop Services BPA to analyze a Remote Desktop Gateway
    implementation
    2. RDS: The RD Gateway server must be configured to use a valid SSL certificate
    In addition, you need to specify the FQDN name of RD gateway under
    DefaultTSgateway in IIS setting. Please go through below article for details.
    RD Gateway/Web Access Outside the Firewall
    Hope it helps!
    Thanks,
    Dharmesh

  • Image size problem with Retina Macbook Pro

    I exported raw images to Jpg and then resized as 1200 x 800 resolution images through "Easy batch Pro" app. When I uploaded them, they were extremely large. I've tried it several times and the result was always the same. Is it a problem with "Easy batch Pro" app, or something with Retina Display resolution? I also resized them as small size like 600x400, but the image was totally broke, and apparently had different look when I saw the original via aperture. What should I do?

    What's the problem exactly?  Call and complain.  It's up to them on how they want to handle it, but if it's something normal or minor, they'll just fix the issue under warranty and send you on your way.  That's how warranty works.  In instances where a user has had repetative failure of the same kind or others with the same system, a complete replacement was done, but those were issues that border on the "it's a lemon" idea.

  • Problem uploading SSL certificat on a WLC 5508

    Hello,
    I'm trying to upload a SSL-certificate (RSA:2048) on a WLC 5508 via the "Management->HTTP-HTTPS" - Tab and get the following problem :
    *TransferTask: Jul 18 16:36:14.487: %UPDATE-3-CERT_INST_FAIL: updcode.c:1276 Failed to install Webauth certificate. rc = 1
    *TransferTask: Jul 18 16:36:14.487: %SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4028 Cannot PEM decode private key
    I've generated it using the following commands:
    # openssl pkcs12 -export -in my.crt -inkey my.key -certfile my.ca-bundle -out CA.pfx
    # openssl pkcs12 -in CA.pfx -nodes -out CA.pem
    But it doesn't work...
    Does anyone have an idea?
    Best regards,
    Eric

    Hello Eric,
    I'm facing the same problem, when trying to upload a chained SSL certificate (2048bits) to the wlc version 7.0.116.0
    Did you use an unchained certificate and what size is your cert?
    According to a Cisco document, for controllers version 5.1.151.0 and later, only unchained certificates are supported for the management certificate.
    I'm just wondering, if this limitation still applies to the newer versions.
    Regards,
    Oliver

  • Ssl certificate exceeds maximum length

    Here is the situation I am having....
    When ever anyone(I have tried, as well as many of my friends and family) tries to log-in to my mail server they get an ssl error saying the the ssl cerificate exceeds maximum permissible length.
    my e-mail web login is page is located here --- https://mail.warezwaldo.us/mail/
    I know that this server is working properly, because I can get to that web page from my Internal Network(with no problems after getting standard cetificate error & excepting the Certificate) but Can Not get to it from the outside world.
    I have verified that SSL is enabled on the Server as well as the Web Browser. I have searched the web for possible solutions to this issue but have yet to find the Solution.
    I am currently on an openSuSE 11.2 Linux Laptop, and have tried in Ubuntu8.04, 9.04, 9.10, and 10.04, as well as Mint7 & 8, and Windows Vista Home Premium & Windows 7, all using FF 3.5.9.
    Can anyone PLEASE HELP, I am trying to start a Business providing Secure E-mail with the ability to have a Web Login Page and this issue is killing me.
    Steps I have taken so far --- I have unistalled and reinstalled the iRedMail system on a server running Ubuntu Server 8.04, 9.04, 9.10, openSuSE server 11.1 & 11.2, CeNTOS 5+, Fedora 10, 11, 12... I have also tried the iRedOS with & with out Updates, and they all give the same error -- ssl certificate exceeds maximum permissible length.
    == URL of affected sites ==
    http://mail.warezwaldo.us/mail/

    OK here is the solution to the Issue that i was having. After dealing with my ISPs crappy equipment I figured out that the issue was being caused by teh Qwest Provided Actiontec PK5000 DSL Modem. Upon initial set-up I had used just the Advanced Port Forwarding and had assigned ports 25, 110, 143, 443, 585, 993, 995 to be forwarded to my mail server, ports 22, 80 to web server, ports 53, 953 to dns server. For 5months this worked just fine and then all of the sudden it stopped working.
    After Dealing Directly with Actiontec Support Staff and being told that I found a "Glitch" in their Software, and well to say the least Actiontec Support Staff couldn't figure out what was causing the Issue and if there was a fix or work around. After about 75hrs of trying to trouble shoot the problem I found the Fix and/or Work Around.
    First: Set-up rules under Advanced Port Forwarding for the appropriate ports to the appropriate IPs
    Second: Create New Rules in Application Forwarding and apply those Newly Created Rules to the Appropriate IPs
    Third: (This is MY RECOMMENDATION) Replace the Actiontec PK5000 ASAP it will stop working on you, this "Glitch" Came after having just Advanced Port Forwarding Rules in place and working fine for 5 months) Third Step to fix the Issue Hope and Pray that the Modem and those Rules will last long enough for you to replace the DSL Modem. I recommend the D-Link DSL2540b it was easy to set-up and runs a lot Cooler than the Actiontec M1000 and PK5000

  • Verification error when run the game after download the jad/jar by OTA on BB 8300

    On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
    I check the article "Support - MIDlet has verification error at offset", and have no harvest.
    BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
    How to fix the bug?
    Thanks for your help.

    Hello,
    I gather for your lack of details that you are wanting to get an application that you have written working on the device?
    Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
    Lacking this however, the software needs to be fixed.
    You'll have better luck looking on the Java forums, not here...
    Checked out my Blackberry FAQ's and Links to Needed Articles here
    http://darkeen.homelinux.com/index.php/Blackberryfaq

  • Image Verification Error

    My client has been reportng issues to me about when some people try to submit an application on their site that they recieve the error message "Image Verification Error". I had submitted a ticket to BC about this and was informed that there was some javascript causing this issue. I have gone through this page and removed any javascript that is not essential for that page hoping to fix the problem, but I was informed yesterday that they recieved some emails saying the same thing. So I am hoping someone else who has had this issue may have an answer.
    Here is a link:
    http://www.americanavc.com/Apply-Online?RefNumber=H-PHX1008&Position=IMMEDIATE%20-%20Hotel %20Audio%20Visual%20Technical%20Coordinator%20%28Phoenix%29
    Any help you can provide would be appreciated.
    Thank You

    I found when testing the image capture, if you mis-enter the image verification details and submit; you correctly receive an "incorrect verification error".
    However, when you hit the back button and re-enter the characters correctly, it still shows the same "incorrect verification error".
    I'd be interested too if there's a known issue and a fix?
    I am aware there is a new image captcha coming soon.
    http://forums.adobe.com/message/4811786#4811786
    Regards
    Mike

  • I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user,  could anybody guide me?

    I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user,  could anybody guide me? actually, my computer can't start  since three days ago, could it be the same problem?

    Logic is the APPlication (program, app) that you are having the problem with.
    Logic Pro can take advantage of other computers on your local (home or work) network to help it do "heavy lifting" data chores by using Bonjour and a feature called Nodes.   It seems that Logic is attempting to find and connect to another machine on your network.
    Do you have Logic installed on another computer there?  That may be the source of the confilict.
    You might want to post this question in the Logic Pro Community.
    Be sure to indicate the version of Logic Pro that you are using.  I'm sure the folks there can help you out.

Maybe you are looking for

  • Unable to run a report from developer 10g

    Hi, i can´t run a report from developer 10g when i run the report with the web icon appears the message Thu Jan 07 14:44:29 CST 2010 javax.servlet.jsp.JspException javax.servlet.jsp.JspException      at oracle.reports.jsp.ReportTag.doStartTag(ReportT

  • How to update video drivers in Windows?

    I just bought the new MBP this morning. I began crashing while playing Warhammer and it seems like it could be a driver issue. I tried installing two different drivers from laptopvideo2go.com but both of them made me immediately bluescreen whenever t

  • Good old days PS icon

    For anybody nostalgic for the good old PS eye, here's the classic eye icon circa PS 5, ready to be used (on Windows machines anyway, not sure about Mac). It's actually not that easy to find. I've had it hanging around for years. www.wildnorthwest.org

  • Best bang of the buck upgrades to MacBook Pro?

    I'm in the market for a MBPro 15" with the anti-glare screen.  I am weighing two other options: 1) the 2.4 Ghz v. 2.2 Ghz processor; 2) the 7200 rpm drive. My usage is pretty typical office work (excel sheets, sometimes on the large / complex side, s

  • Disk Insertoion Error

    From time to time I run into an error message displayed in Tiger 10.4.11: "Disk Insertion" Disk you have installed was not readable by this computer: Several options are provided: Initialize, eject, cancel. I have not installed a new disk. I do have