Problem updating phone code 3014 appears how can I esolve it?

i  deleted all setting and donner of my iphone when he restart her self the apple still bloked and he didind boot i try to update but many error problem updating phone code 3014 appears how can I esolve it? and now he still always in recovery mod what can i do ;;;;(

Dissable wifi sync and then try the update again.
Should all be sorted then,
Ryan

Similar Messages

  • HT4623 when i go to settings general update settings dose not appear . how can i update my phone

    when i go to settings<general< update settings dose not appear
    how can i update my software /

    Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
    (81448)

  • Problems updating to 8.1 then how can I update to 10?

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 17-j070ca Notebook and issues with an upgrade to 8.1. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that might need updating. A virus protection software can cause the download to stop or stall. You might want to temporarily disable this.Here is a link to a fix from Microsoft. It will look at the issues and help you fix it automatically. Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. I hope this helps. Thanks.

    Thanks for the reply. I have already been using the HP Support Assistant and tried the diagnostics and tools. Checked for updates using this program and also went on the HP support page. I use Bitdefender antivirus and I am not convinced it will be the issue and will give it a try. I have run the fix from Windows and it did not solve my problems. I have these issues pending:1-activation of Windows (see attached image)2-Cannot upgrade to 8.13-Can even less upgrade to 10  Still stuck in the middle of nowhere.

  • My Iphone has family emails that appear randomly when I try to update apps or generally have to log into my account. It comes up as my sister in laws address. She was once connected to our account when she got her phone at first. How can I remove?

    My Iphone has family emails that appear randomly when I try to update apps or generally have to log into my account. It comes up as my sister in laws address. She was once connected to our account when she got her phone at first. How can I remove? There are only two other email address's associated with my account and hers was never one of them! I do have a cloud set up on my phone. I thought this issue had gone away when I canged my passwords, but I just registered a new phone yesterday and its happening again!
    Can anyone help me?

    Apps are permanently tied to the Apple ID used to purchase them, and all future updates will require you to enter the password associated with this ID, whether you are currently using this ID for purchases or not.  If you are being prompted for your sister-in-law's Apple ID when updating it means that there must be one or more apps on your phone that was purchased using her Apple ID.  (When she synced with your computer it may have transferred this app to your library.  It was subsequently synced to your phone.)  The only way to stop the prompt for her ID is to delete these apps from your phone and your iTunes library and repurchase them using your Apple ID.

  • I was updating my iphone ios suddenly battery was drain and itunes logo appears, how can i recover my file back? does anyone can help me...

    i was updating my iphone ios suddenly battery was drain and itunes logo appears, how can i recover my file back? does anyone can help me...

    Was your phone jailbroken?

  • Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in Iphoto. A few days ago my sispluggeditintoanothercomputerbutidon'tknowwhatshedid

    Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in iphoto either. A few days ago my sis plugged it into another computer but I don't know if she synched it to the other computer, and frankly, she won't remember. I have tried updating itunes, charging the ipod, restarting the ipod/computer, and the rest of what the apple site said to do. Ps I have the latest ipod touch
    I need help stat! Please help!

    I'd say your sister messed up and your iPod is toasted.
    Think about it...  She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer... 
    Also take into consideration how old is your sister, and how much does she know about electronics?

  • I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

  • I cannot sync my newer contacts I have created on my iPhone to the iCloud so they do not appear in iMessage on my Mac. Only the phone number does. How can I fix this?

    I cannot sync my newer contacts I have created on my iPhone to the iCloud so they do not appear in iMessage on my Mac. Only the phone number does. How can I fix this?

    okay. I looked and my default account and it is my mobile me account... how do I transfer those to the cloud?

  • What is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

    what is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    Above from:
    http://support.apple.com/kb/TS3694

  • HT3819 Ever sinve I updated the software on my phone I have not been able to download all my previously bought music onto either my phone or laptop. How can I get all my music on my laptop as I have spent a lot of money on itunes

    Ever sinve I updated the software on my phone I have not been able to download all my previously bought music onto either my phone or laptop. How can I get all my music on my laptop as I have spent a lot of money on itunes

    See Recover your iTunes library from your iPod or iOS device (or purchase history).
    tt2

  • TS3694 My iPad says it has to restore to update, but it will not.  It is caught in a cycle of not being able to restore but needed to restore.  I keep getting error code 3014 but I can not figure out what this means!

    My iPad says it has to restore to update, but it will not.  It is caught in a cycle of not being able to restore but needed to restore.  I keep getting error code 3014 but I can not figure out what this means! nor can I do anything about it!  So Frutrated!

    Also...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT201304 I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

    I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I am on a intel Imac and need to update to 10.5. How can i do this?

    I am on a intel Imac and need to update to 10.5. How can i do this?

    You really should update to Snow Leopard because Leopard is no longer in production. The following tells you about Snow Leopard but also what's need to upgrade past Snow Leopard should you be able and wish to do so.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
      1. Open Disk Utility from the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal
    startup drive.
    C. Important: Please read before installing:
      1. If you have a FireWire hard drive connected, disconnect it before installing the update
          unless you will boot from this drive and install the update on it. Reconnect it and turn
          it back on after installation is complete and you've restarted.
      2. You may experience unexpected results if you have installed third-party system
           software modifications, or if you have modified the operating system through
           other means. (This does not apply to normal application software installation.)
      3. The installation process should not be interrupted. If a power outage or other
          interruption occurs during  installation, use the standalone installer (see below)
          from Apple Downloads to update.  While the installation  is in progress do not use
          the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
          1. Insert OS X Installer Disc into the optical drive.
          2. Restart the computer.
          3. Immediately after the chime press and hold down the "C" key.
          4. Release the key when the spinning gear below the dark gray Apple
              logo appears.
          5. Wait for installer to finish loading.
          6. Follow instructions.
    E. If updating:
      1. Download and install update(s) 
      2. Use Software Update, or
      3. Download standalone updater(s).

  • HT201210 my Iphone is completely down; error code 2001. How can I fix this?

    My Iphone 5 is completely down; error code 2001. How can I fix this. I updated the last version of ITunes. Before then phone went black the battery run empty very fast. I had a long flight and switched the phone completely off with 30% battery remaining to make sure that I had battery after I landed. However I couldn't get it working anymore. When I push the home and the "off" button at the same time I see a Itunes logo and a USD connection with an arrow.
    Thanks,
    Bas Rekvelt

    What is the EXACT error message you're getting?

  • I resently cracked my screen on my iPhone 4 and had to get a new one... Whe backed the old phone up it didn't save my old apps and now I no longer have that phone...  How can I recover a list of all my apps?

    I resently cracked the screen on my iPhone 4 and had to get a new one... When i backed the old phone up it didn't save my old apps and now I no longer have that phone...  How can I recover a list of all my apps?

    Backup does not include apps,music,vids,etc
    Backing up, updating, and restoring iPad, iPod touch, and iPhone software
    You can loo up your purchases in your purchase history ( in your account in itunes)  and unlike music, you can redownload apps.
    How to redownload purchased apps from the App Store

Maybe you are looking for

  • URGENT: Function modules or BAPIs

    Hi Experts, I need function modules or BAPI to get the open items and cleared items G/L Account wise. Useful replies will be surely awarded.

  • InDesign CS3 crashes on start up, using Tiger

    i recently installed InDesign CS3 on my machine, and it unexpectedly quits whenever i try to start it. it starts up fine in safe mode. I did the following already, getting this information from the InDesign support page: When you start Adobe InDesign

  • Hd space vanished (parallels)...

    just installed parallels desktop and win xp pro, iv seen in places about 40 gig been takin up by it for win hd, i installed it anyway and parallels had a 32 gig hd image for win that was an expanding one so it was suposedly 0kb and expanded as u need

  • Running multiple sessions Jdev 11.1.2

    Hello: Thanks for looking at this post... Is it ok to run Jdeveloper multiple times on the same machine under XP? For example: I start Jdeveloper and start manipulating Project A. I want to look at Project B so I start Jdev again and open project B.

  • Integration of bpel with ucm

    Hi All, I want to integrate Bpel with UCM but i want to call Bpel from UCM , can anyone please suggest me some documents to go through. THanks