Problem Uploading Encrypted BITS to Library Server.

Hello. I am really hoping someone can help me, as I am completely stuck.
I have a HyperV cluster of 3 servers, who's VHD files are located on a scale-out file server over a 10GbE link. The VMs are running fine. But the fileserver, is also the VMM Library server. All of a sudden, I can no longer upload ISO resources into the library
using the encrypted BITS method. I am certain I have all of the necessary permissions, because when I go un-encrypted, everything works fine.
However, when I try encrypted, I get the following error:
The library server certificate is not available on the client running the application. Try contacting
the administrator to install the certificate in the trusted people store of machine account or run the
client with local machine administrator privileges (Elevated) or try the transfer with -AllowUnencryptedTransfer parameter.
Run the client (Cmdlet/Admin Console) with elevated administrator privileges.
ID: 24364
I have searched on this error and cannot find much. I have made sure the library server's certificate is in the trusted people store of the VMM management server. I have also tried restarting the VMM management server.
Not sure where to go from here....
Any help would be greatly appreciated.

Hi, I'm trying to fix the same error. Did you ever get an answer?

Similar Messages

Have problems uploading Edge with dreamweaver to server.

I'm having problems uploading edge in dreamweaver to my server. It shows off line and when i check in all browsers. When I upload to server, it doesn't show in page. Is there a tutorial that would show me how to upload it to server?

The Microsoft article below is useful.
Network Connectivity
http://technet.microsoft.com/en-us/library/cc961803.aspx

Problems uploading class files to web server

Regular class files upload fine(to yahoo geocities) but when I try to upload multiple class files of the same instance(ex: MyProg.class, MyProg1$.class, MyProg1$2.class) the ones with the $ symbols wont upload therefore rendering my applet on my website useless. I can change the name and then upload it, but when I go to rename it within the site, I get an "invalid file name" error. I just want my applets to run on my web page so that people can play with them.
Any help would be greatly appreciated!
Scott Miller

AOL is the same. Note that the xxx$.class files relate to inner classes and you can solve your problem by removing them and creating seperate classes for these.

Problem Uploading Music (Manually)

I am having a problem uploading music from my library to my ipod which has never been an issue before. I import a CD to my library and when I try to drag the music to my ipod I get a message that says:
"The songs were not copied to the Ipod because they cannot be placed on this Ipod."
Any ideas what is wrong? Thanks.

The CD is uploading to my Itunes library with no problem; it is when I try to drag the songs onto the Ipod that I am getting this message.

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on th

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.

You haven't a problem. You simply did not read the iWeb Help :

Problem uploading site to server by FTP - index page is blank

Hi,
I made my site in I web which works fine when simulating it in a local folder. When uploading by FTP to the server from a host where a rent my domain the program starts sending the files, but in the end it says publication error, try again later or contact your server provider.
I did contact the server provider and they do receive the pages that I am sending BUT:
- everything appears to end up at the wrong place in the server
- the index page that is sent with the other files appears to be empty, blank which results in the server not be alble to order the site and a white empy page is shown when opening my site on the internet.
I checked the html files which are all fine and when I send those to the server provider they seem all ok. But the index.html file is also empty on my computer. Is this normal?
My first page is called 'home' and we had tried to rename that home.html file to index.html and again upload the whole site. The result is that I can now see my homepage when opening the site on the internet but without the index on top (the names of the other pages where you can click to go to another page on the site) and that is it.
Can someone help me with this? Is this a problem with Apple, shoud the index.html file be blank? Or can they change settings in the server to solve this problem.
Grtz,
Kroko

iWeb was originally designed as a foolprof way to create websites and upload them to MobileMe.
Normally, the first, or Home, page of a website is named "index" since an index.html is required in the root folder of the server for everything to work as planned.
To stop us rookies screwing things up, and to overcome the limitations of a single MobileMe user account, the developers packaged the site files in a folder with the same name as the sitename in iWeb.
The top site in iWeb has an external index file which rediredts to the Home page so that it can be reached by the URL...
http://www.domain-name.com
Any other sites are uploaded as sub sites and require the addition of the folder name in the URL...
http://www.domain-name.com/Site-Name/
When you are uploading to a server other than MobileMe, you have two choices of publishing methods...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
Using the iWeb FTP allows you to upload the files in a foolproof way to avoid breaking the site structure. If you want to remove the site name from the URL you can publish to a local folder and upload the contents only...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
This latter method is only viable so long as you don't have a blog or podcast feed.

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Hello.
Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
Eg ftp.domain.com:21
Please try the 2 suggestion above and let me know if it works.
Regards
Vivek

Has anyone else had problems uploading modifyed files to an external server

Hi, My website bilyz.com has been running OK on two external servers, two different hosting providers, yet neither will allow me to upload modified files.
Since both external servers will run my site OK this narrows the problem source down to my site construction (pre 2014 update) or to Muse software.
The external servers will accept all my html files without a hitch but stalls at various images and not always the same image.
Now I have totally rebuilt the site by stripping out all images, resizing them and remounting them into the slider widget but it doesn't make a difference.
The external server technicians are at a loss to explain and after research have referred me back to Adobe Muse.
Kind regards
Bill Watters

Thank you Aish
As per your suggestion I published the unchanged site to Business Catalyst as bilyzcom.businesscatalyst.com and it uploaded without a fault. Then I made an alteration to the Gallery page where I changed one image in the slider and a small typo on the Design page. Then published again but this time I selected 'options' and clicked on 'modified files only' Result: The site uploaded perfectly and the altered pages showed the recent changes.
So can we conclude that the source of the problem isn't in the Muse software?.
However, If this problem only occurs with the external server since the update; it also stalls when uploading all files and with modified files so could it point to the recent Muse 2014 update?
Yesterday I have also uninstalled my most recent version then re-installed it via the Creative Cloud File manager. . My copy is 2014.0.1.30 CL 785017
I hope this gives you something to work on.
I look forward to your reply.

File upload problem. Can't write to server

Hi guys,
I am currently trying to upload some images to the server I am using but I can't succeed.
I am using a form consisting of 3 text fields 1 textarea and an upload form.
The whole thing is working fine on my localhost . All the items are being inserted to the database and the files saved to the path.
But when I try to upload to the commercial server even though the text field are being read and inserted to database the files just can't!!
my tree structure is
/home/domain/www-domain/webapps
and that's what I am getting when using
getServletContext().getRealPaththe full line for getting the real path is
FileWriter fw2 = new FileWriter(getServletContext().getRealPath("//upload"+fileName+".jsp")); I am using tomcat 4.0 and all the other servlets are working just fine
as this one apart from the FileWriting thing?
am I doing something wrong with the getServletContext thing?
And if so, why is it working just fine on my pc?
I am only suspecting that I am not getting the path correctly
I want to store the images under
webapps/upload/images
but it doesn't work even when I am trying to store under webapps (root directory)
Is there any way that I am not getting permission to write to the server??
Any help is highly appreciated!!
cheers

the thing is that I am not getting any exception back to my browser> some of the values are inserted into the database (the ones that are not referring to any uploded items). i guess i have to do a print.stacktrace but I am not sure at which point...
ok I am posting the full code to give you an idea. Your interest is much appreciated , thank you
import java.sql.*;
import java.text.ParsePosition;
import java.text.SimpleDateFormat;
import java.util.*;
import java.util.Date;
import gr.cretasport.util.*;
import org.apache.commons.fileupload.*;
import java.awt.Image;
import java.io.*;
import javax.servlet.RequestDispatcher;
import javax.servlet.ServletConfig;
import javax.servlet.ServletContext;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest ;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
* @author myron.veligradis
* 17/09/2005
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
public class InsertArticle extends HttpServlet{
* global variables
String fieldName;
Image imageIn;
Resize rsImg = new Resize();
Mirror mrImg = new Mirror();
//ImageProcess ImPr = new ImageProcess();
Date curDate;
String datecur;
String inputtext;
BufferedWriter bw;
String aRString ;
String photoPath;
File savedFile;
String txtPath;
String txtPathFullText;
String author;
String eidos;
String kathgoriaID;
String title;
String rating;
String kathgoria;
String keimeno;
String keimenoRest;
String fullKeimeno;
String hmeromhniaD;
final String jspPrefix="<%@ page contentType=\"text/html; charset=iso-8859-7\" language=\"java\" errorPage=\"\" %>";
Connection con=null;
Statement statement = null;
ResultSet rs, rs1 = null;
int kathgoriaIDInt;
int ratingInt;
public void init(ServletConfig conf) throws ServletException {
super.init(conf);
public void doPost (HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException, UnsupportedEncodingException {
// try {
//   req.setCharacterEncoding("iso-8859-7");
//   catch (UnsupportedEncodingException uee)
boolean isMultipart = FileUpload.isMultipartContent(req);
HttpSession session = req.getSession();
ServletContext sc = getServletContext();
   * GET THE FILE NAME
curDate=new Date();
datecur = curDate.toString ();
    String fileName = datecur.replaceAll("\\W","_");
    String strDate = curDate.toString();
    SimpleDateFormat formatter= new SimpleDateFormat ("EEE MMM dd hh:mm:ss zzz yyyy");
Date date = formatter.parse(strDate,new ParsePosition(0));
hmeromhniaD = new SimpleDateFormat("yyyy-MM-dd").format(date);
   * GET THE PARAMETERS
   * FILE UPLOAD *******************************************************
System.out.println(isMultipart);
DiskFileUpload upload = new DiskFileUpload();
try {
   req.setCharacterEncoding("iso-8859-7");
   List items = upload.parseRequest(req);
   Iterator itr = items.iterator();
   while(itr.hasNext()) {
    FileItem item = (FileItem) itr.next();
//    String articleTitle = new String(req.getParameter("articleTitle").getBytes("iso-8859-1"),"iso-8859-7");
   // check if the current item is a form field or an uploaded file
     if(item.isFormField()) {
     // get the name of the field
     // if it is name, we can set it in request to thank the user
     if (item.getFieldName().equals("author")) {
            author = new String(item.getString().getBytes("iso-8859-1"),"iso-8859-7");
     if (item.getFieldName().equals("eidos")) {
            eidos = new String( item.getString().getBytes("iso-8859-1"),"iso-8859-7");
     if (item.getFieldName().equals("keimeno")) {
            keimeno =item.getString();
            FileWriter fw1 = new FileWriter(getServletContext().getRealPath("webapps//upload"+"pro_"+fileName +".jsp"));
       fw1.write(jspPrefix+"<html><body>"+keimeno+"</body></html>");
       fw1.close();
       txtPath = ("upload/text/"+"pro_"+fileName+".jsp");
     if (item.getFieldName().equals("keimenorest")) {
            keimenoRest =item.getString();
            FileWriter fw2 = new FileWriter(getServletContext().getRealPath("//upload"+fileName+".jsp"));
       fw2.write(jspPrefix+"<html><body>"+keimeno+" "+keimenoRest+"</body></html>");
       fw2.close();
       txtPathFullText = ("upload/text/fulltext/"+fileName+".jsp");
     if (item.getFieldName().equals("title")) {
           // title = new String(item.getString().getBytes("iso-8859-1"),"iso-8859-7");
            System.out.println ("titlos "+title);
            title=getServletContext().getRealPath("webapps//upload");
     if (item.getFieldName().equals("rating")) {
            rating = item.getString();
     if (item.getFieldName().equals("kathgoriaID")) {
            kathgoriaID = item.getString();
   else {
    // the item must be an uploaded file save it to disk. Note that there
    // seems to be a bug in item.getName() as it returns the full path on
    // the client's machine for the uploaded file name, instead of the file
    // name only. To overcome that, I have used a workaround using
    // fullFile.getName().
    File fullFile = new File(item.getName());
    //check if input file is actually an image
    if ( item.getName().toLowerCase().endsWith(".jpg") ||
    item.getName().toLowerCase().endsWith(".gif") ||
    item.getName().toLowerCase().endsWith(".bmp"))
     File temp = new File(getServletContext().getRealPath("webapps//upload")," temp.jpg");
     item.write(temp);
     //to class Resize pernei 2 inputs, to file kai to path string
     rsImg.resizeImage(temp,getServletContext().getRealPath("webapps//upload"+fileName+".jpg"));
     //to class Mirror pernei kai ayto 2 inputs, to file poy exei dhmiourgithei apo panw
     //pou to kanei overwrite epeidh pernoun to idio onoma me to time stamp
     Mirror.mirrorImage(new File(getServletContext().getRealPath("webapps"+fileName+".jpg")),
       getServletContext().getRealPath("webapps//upload"+fileName+".jpg"));
     System.out.println("upload/images/"+fileName+".jpg");
kathgoriaIDInt= new Integer(kathgoriaID).intValue();
ratingInt   = new Integer(rating).intValue();
   * HTML UPLOAD
catch (Exception fe) {
//get the string names to insert to database
photoPath="upload/images/"+fileName+".jpg";
   * INSERT THE DATA INTO THE DATABASE
InsertToDatabase();
String url="/insertarticle.jsp";
RequestDispatcher rd = sc.getRequestDispatcher(url);
rd.forward(req,res);
//res.sendRedirect( res.encodeRedirectURL( "indextest.jsp "));
public void InsertToDatabase() {
try {
   con=null;
   statement = con.createStatement();
   String insertprefix = "insert into articles(eidos,photopath,textpath,textpathfull,title,author,dateen,rating, kathgoriaID) VALUES"
     + "('" + eidos.trim() +"','" + photoPath.trim() + "','"   +
     txtPath + "','" + txtPathFullText + "','" +title + "','"+ author + "','"+ hmeromhniaD + "','"+ ratingInt+ "','"
     +kathgoriaIDInt + "')";
   statement.execute(insertprefix);
   statement.close();
   con.close();
   catch (Exception e)
}

À PROBLEM IN THE INSTALLATION OF SQL SERVER

I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
PLEASE HELP ME !

I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
PLEASE HELP ME !
Without the exact error message wwe will just hit arrow in the bush.Please post summary.txt which was generated due to failed installation.Below link will help you locate it
http://technet.microsoft.com/en-us/library/ms143702.aspx
Below link will give useful info about how to proceed with installing SQL server on win 8
Considerations before installing SQL server on win 8
Hardware and software requirement for installing SQL server 2012
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Problem - upload video

Howdy Everybody,
I had problem with Sharepoint Server 2013 when I was upload video (3mb).
ID: 0289b79c-fdf3-40d0-fae9-6033a32bd938
Category: Authentication Authorization, Logging Correlation Data, Monitoring
[Forced due to logging gap, cached @ 09/11/2014 17:24:19.52, Original Level: Verbose] {0}
0289b79c-fdf3-40d0-fae9-6033a32bd938
Authentication Authorization ajmmt
High [Forced due to logging gap, Original Level: VerboseEx] SPRequestParameters: AppPrincipal={0}, UserName={1}, UserKye={2}, RoleCount={3}, Roles={4}
0289b79c-fdf3-40d0-fae9-6033a32bd938
b4ly High
Leaving Monitored Scope (SPSqlClient). Execution Time=1593.97577066359
0289b79c-fdf3-40d0-fae9-6033a32bd938
can anyone help me please?
Thanks,
Lucas

Hi Lucas,
Based on your description, I recommend to verify the things below:
Check if you have permission to upload documents to the library.
Check if the file type of the video is blocked in SharePoint. Go to Central Administration > Security > Define blocked file types under General Security > check if the file extension of the video is added in the file types.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problem uploading files

I'm having a big problem trying to upload files - whether it is as an email attachment or homework for and online class. I get to the file I want to attach, and the ‘choose’ button does not become clickable, and then the entire web browser freezes up. The only thing to do then is to force quit and try again, but it never works. My dad bought a MacBook at the same time I did and he has no problem uploading files. Does anyone have any suggestions? It will be quite annoying if I have to transfer all of my documents on a flash drive to another computer every time I need to upload something. Thanks in advance!
MacBook

Welcome to Apple Discussions!
The variety of uploading tools can be a bit daunting, and the design of websites that allow for uploading can also be. Ideally a website can be set to have a common FTP server that everyone can upload to with a standard FTP program such as http://www.rbrowser.com/ or http://rsug.itd.umich.edu/software/fugu/
If it is a website with a choose file from hard drive type setup, it may be the code of the website is poorly designed for specific browsers as my FAQ here explains:
http://www.macmaps.com/browser.html
As for sending e-mail, if you are sending e-mail to Windows users, use the attachment toolbar button in Apple's Mac OS X Mail by first making sure it is there in the View menu -> Customize Toolbar, and you'll find in the dialog to choose documents a checkbox for Send Windows Friendly Attachments.
If you are connecting a server with Appleshare or NTFS drives that's whole different issue which may have to deal with firewall ports.
So the real question is, what method are you using to send files to other people, and what operating system do the other people have?

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

How to upload a file in application server to an internal table

Hi,
      I am asked to upload a file from application server to internal table. Can you please suggest me the ways to do it or the function module which helps to browse the application server file names.
I have done a program. But its giving problem in searching the files from application server. I am pasting my code for ur review. Please tell me which part i have to correct or suggest me some other ways to do it.
*& Report ZUPLOAD1
REPORT ZUPLOAD1.
type-pools: truxs.
parameters: p_upl_ps radiobutton group g1 default 'X', "upload from pres. server
             p_path type rlgrap-filename,
             p_upl_as radiobutton group g1,   "upload from appln server
             <b>p_dir LIKE filepath-pathintern DEFAULT 'Y_ABAP',
             p_file LIKE filepath-pathintern lower case,</b>
             p_test as checkbox.
constants: c_x value 'X',
           c_tab type c value cl_abap_char_utilities=>horizontal_tab.
types: ty_data(1000) type c.    "structure to hold legacy data
data: i_data type standard table of ty_data. "internal table of ty_data
types: begin of stritab,
      land1 type v_t604-land1, "structure of legacy file.
      stawn type v_t604-stawn,
      bemeh type v_t604-bemeh,
      impma type v_t604-impma,
      minol type v_t604-minol,
      end of stritab.
data: gi_itab type standard table of stritab, "internal table of legacy file
      gw_itab type stritab. "work area
data: i_raw type truxs_t_text_data,
      v_fullpath type string.
at selection-screen on value-request for p_path.
if p_upl_ps = c_x. "if presentation server is selected
perform get_file.
else.            "if application server is selected
perform set_file_path.
perform upload_from_server.
perform split_data.
endif.
form get_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
IMPORTING
   FILE_NAME           = p_path.     "getting the file name of pres server
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR          =
    I_LINE_HEADER              = 'X'              "converting excel to sap and filling in
    I_TAB_RAW_DATA             = i_raw      "internal table
    I_FILENAME                 = p_path
TABLES
    I_TAB_CONVERTED_DATA       = gi_itab
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
form set_file_path.                 "Getting the file path of application server
data: lv_file type p_file.
      lv_file = p_file.
      CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
        EXPORTING
        CLIENT                           = SY-MANDT
          LOGICAL_PATH                     = p_dir
        OPERATING_SYSTEM                 = SY-OPSYS
        PARAMETER_1                      = ' '
        PARAMETER_2                      = ' '
        PARAMETER_3                      = ' '
        USE_BUFFER                       = ' '
          FILE_NAME                        = lv_file
        USE_PRESENTATION_SERVER          = ' '
        ELEMINATE_BLANKS                 = 'X'
       IMPORTING
         FILE_NAME_WITH_PATH              = v_fullpath
       EXCEPTIONS
         PATH_NOT_FOUND                   = 1
         MISSING_PARAMETER                = 2
         OPERATING_SYSTEM_NOT_FOUND       = 3
         FILE_SYSTEM_NOT_FOUND            = 4
         OTHERS                           = 5
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
endform.
form upload_from_server.
data: lv_msg type string,
      lw_data type ty_data.
open dataset v_fullpath for input message lv_msg in text mode encoding default.
if sy-subrc <> 0.
message lv_msg type 'i'.
stop.
endif.
do.
read dataset v_fullpath into lw_data.
if sy-subrc <> 0.
write:/5 'Error in processign data set'.
exit.
endif.
append lw_data to i_data.
enddo.
close dataset v_fullpath.
if sy-subrc <> 0.
write: /5 'Error closing dataset'.
endif.
endform.
form split_data.
data: lw_data type ty_data.
data: lw_itab type stritab.
data: begin of ty_itab,
      land1 type v_t604-land1,
      stawn type v_t604-stawn,
      bemeh type v_t604-bemeh,
      impma type v_t604-impma,
      minol type v_t604-minol,
      end of ty_itab.
loop at i_data into lw_data.
split lw_data at c_tab into
      ty_itab-land1
      ty_itab-stawn
      ty_itab-bemeh
      ty_itab-impma
      ty_itab-minol.
lw_itab-land1 = ty_itab-land1.
lw_itab-stawn = ty_itab-stawn.
lw_itab-bemeh = ty_itab-bemeh.
lw_itab-impma = ty_itab-impma.
lw_itab-minol = ty_itab-minol.
append lw_itab to gi_itab.
endloop.
endform.
start-of-selection.
loop at gi_itab into gw_itab.
write: /5 'COUNTRY', 'IMPORT CODE', 'SUP UNIT', 'FIRST UOM', 'SECOND UOM',
       /5 gw_itab-land1, gw_itab-stawn,gw_itab-bemeh,gw_itab-impma,gw_itab-minol.
endloop.
end-of-selection.
I hope problem must be in p_dir and p_file which are in bold.. Kindly help me out. Thanks in advance.

see the following ex:
*&      Form SUB_GET_FILEPATH
      text
--> p1        text
<-- p2        text
FORM SUB_GET_FILEPATH .
    GFILE = 'D:\SAP_INT\INBOUND\INBOX'. "Path
ENDFORM.                    " SUB_GET_FILEPATH
*&      Form SUB_GET_FILE
      text
--> p1        text
<-- p2        text
FORM SUB_GET_FILE .
DATA: P_FDIR(200) TYPE C.
DATA: IT_FILEDIR1 TYPE STANDARD TABLE OF TY_FILEDIR WITH HEADER LINE.
P_FDIR = GFILE.
CALL FUNCTION 'RZL_READ_DIR_LOCAL'
    EXPORTING
      NAME     = P_FDIR
    TABLES
      FILE_TBL = IT_FILEDIR.
REFRESH : IT_FILEDIR1.
LOOP AT IT_FILEDIR.
    IF IT_FILEDIR-NAME(4) = 'ZINC' OR IT_FILEDIR-NAME(4) = 'zinc'.
      MOVE IT_FILEDIR-NAME TO IT_FILEDIR1-NAME.
      APPEND IT_FILEDIR1.
    ENDIF.
ENDLOOP.
IF IT_FILEDIR1[] IS INITIAL.
    STOP.
ENDIF.
LOOP AT IT_FILEDIR1.
    REFRESH: I_TAB.
    CLEAR: I_TAB.
    NAME = IT_FILEDIR1-NAME.
    CONCATENATE: GFILE '\' NAME INTO G_FILE.
    OPEN DATASET G_FILE FOR INPUT IN TEXT MODE
                                     ENCODING DEFAULT
                                     IGNORING CONVERSION ERRORS.
    IF SY-SUBRC EQ 0.
      CONCATENATE 'FILENAME : ' G_FILE INTO I_MSG1.
      APPEND I_MSG1.
      DO.
        READ DATASET G_FILE INTO RECORD.
        IF SY-SUBRC = 0.
          SPLIT RECORD AT ',' INTO I_TAB-BUKRS I_TAB-EBELN
              I_TAB-BLDAT I_TAB-XBLNR I_TAB-LIFNR I_TAB-AMOUNT
              I_TAB-CURR I_TAB-BUSAREA
              I_TAB-BKTXT I_TAB-DMBTR I_TAB-MENGE I_TAB-SRNO.
          MOVE-CORRESPONDING I_TAB TO I_TAB1.
        ELSE.
          EXIT.
        ENDIF.
        APPEND I_TAB1.
        CLEAR: I_TAB, I_TAB1.
      ENDDO.
    ENDIF.
    CLOSE DATASET G_FILE.

Uploading & Downloading Files into DMS Server using Web Dynpro Java

Hello Friends,
      I want to Upload a file from Portal to Document Management Server and to Download a file from Document Management Server to Portal, In short, I want to give the user the facility to Upload a File into DMS Sever via Portal and also to download the file from DMS Sever via Portal.
Can anybody give me a Input for the same from Both Java Development End as well as ABAP End, more inputs are required from ABAP end, since i have a very less ABAP Experience on working with DMS. Few Questions i have in my mind?
1. How to actually access the file contents with the help of Document Number?
2. With the help of Doc-Number we can extract the file from DMS sever but to provide a option for downloading in portal, the   RFC should convert the File Contents into X-String or is there some other way?
+3. While Uploading the Data should be given in Which format to RFC? Are there any limitation with respect to size or formats. Is there any Standard RFC i can use directly in WD4 Java application to upload the file into DMS Server and which will return me the Document Number? +
Please give me your valuable inputs.
Thank You.
Edited by: TusharShinde on Feb 21, 2011 11:13 AM
Now, I am able to download the File in Portal via my WD4 Java Application from DMS Server by passing the Document Number, but I am facing the problem in downloading the PDF files, Its not working for PDF files. Please give me inputs for the same.
Thank You.
Edited by: TusharShinde on Feb 22, 2011 10:13 AM

HI,
Thanks for reply.
I am able to download the file From DMS server but I am still not able to Upload the File to DMS Server via Portal. For Download also it is working for all file formats but not for PDF any specific reason for the same.
function zhrf_rfc_dms_download_document.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(LV_DOCUMENT) TYPE DOKNR
*" EXPORTING
*"     VALUE(LV_FADA) TYPE XSTRING
*" TABLES
*"      LT_DOC STRUCTURE BAPI_DOC_FILES2
*"      LT_OUT STRUCTURE ZST_DMS_FILE_XSTRING
data: ls_docfiles type bapi_doc_files2,
         ls_dms type dms_doc_files,
         lt_docfiles type standard table of bapi_doc_files2.
*      data: LT_OUT type table of ZST_DMS_FILE_XSTRING.
data :wa_out like line of lt_out.
select single * from dms_doc_files
    into ls_dms
    where doknr = lv_document."Retrieve file
if sy-subrc = 0.
    ls_docfiles-documenttype = ls_dms-dokar.
    ls_docfiles-documentnumber = lv_document.
    ls_docfiles-documentpart = ls_dms-doktl.
    ls_docfiles-documentversion = ls_dms-dokvr.
*    ls_docfiles-documenttype = '321'.
*    ls_docfiles-documentnumber = LV_DOCUMENT.
*    ls_docfiles-documentpart = '000'.
*    ls_docfiles-documentversion = 'A0'.
endif.
call function 'BAPI_DOCUMENT_CHECKOUTVIEW2'
    exporting
      documenttype    = ls_docfiles-documenttype
      documentnumber = ls_docfiles-documentnumber
      documentpart    = ls_docfiles-documentpart
      documentversion = ls_docfiles-documentversion
      documentfile    = ls_docfiles
      getstructure    = '1'
      getcomponents   = 'X'
      getheader       = 'X'
*      pf_http_dest    = 'SAPHTTPA'
      pf_ftp_dest     = 'SAPFTPA'
    tables
      documentfiles   = lt_docfiles.
data: i_bin type standard table of sdokcntbin,
        i_info type standard table of scms_acinf,
        v_info type scms_acinf,
        v_id type sdok_phid,
        v_cat type sdok_stcat.
if sy-subrc = 0.
    loop at lt_docfiles into ls_docfiles.
      v_id = ls_docfiles-docfile.
      v_cat = ls_docfiles-storagecategory.
      call function 'SCMS_DOC_READ'
        exporting
          stor_cat              = v_cat
          doc_id                = v_id
          phio_id               = ls_docfiles-file_id
        tables
          access_info           = i_info
          content_bin           = i_bin
        exceptions
          bad_storage_type      = 1
          bad_request           = 2
          unauthorized          = 3
          comp_not_found        = 4
          not_found             = 5
          forbidden             = 6
          conflict              = 7
          internal_server_error = 8
          error_http            = 9
          error_signature       = 10
          error_config          = 11
          error_format          = 12
          error_parameter       = 13
          error                 = 14
          others                = 15.
    endloop.
    if sy-subrc <> 0.
    else.
      data: v_xstring type xstring.
      read table i_info into v_info index 1.
      call function 'SCMS_BINARY_TO_XSTRING'
        exporting
          input_length = v_info-comp_size
        importing
          buffer       = v_xstring
        tables
          binary_tab   = i_bin
        exceptions
          failed       = 1
          others       = 2.
      if sy-subrc <> 0.
      endif.
    endif.
    wa_out-file_name = ls_docfiles-docfile.
    wa_out-binary = v_xstring.
    lv_fada = v_xstring.
    append wa_out to lt_out.
endif.
endfunction.
The above is the RFC Code, I am using in my WD4Java app for downloading the file From DMS Server, Is there any Improvement suggested for above RFC to make it work in more efficient way. Please give me input for my Upload RFC.
Thank You.

Problem Uploading Encrypted BITS to Library Server.

Similar Messages

Maybe you are looking for