Problem: Using iTunes 6 with multiple user accounts in XP

I recently installed iTunes 6.0.0.18 as an upgrade in Windows XP Professional. After installing the software and a restart, I attempted to use iTunes with success as the Administrator. However as another user, iTunes when launched will prompt the user with the user license agreement. When the user accepts the agreement, iTunes never opens, however I have noticed that the hard drive where the music files are located is continually accessed. When logging out an "End Task" message pops up stating that Quicktime Helper Files are still being used.
After the problem arose I attempted twice to completely uninstall iTunes, restart, cleanup the directories, reinstall, and then give all users full control permissions in both the directory structure of iTunes and the registry, with the exact same results.
Currently I have no fix for this problem, but I suspect that it is an issue with the software (iTunes 6.0.0.18). I have since downgraded back to iTunes 5.0.1.4 and am not having any issues.

Hello B,
So I finally had time to download the latest version of iTunes (ver. 6.0.1.3) and install it (logged on as the Administrator account). Please note that during the install I did get an error message that stated something to the effect that "a program tried to access memory location XXXX which is "READ" only." I believe this to be the new memory lock "virus" deterrent system that Intel has recently introduced with the latest 64-bit processors and motherboards, (which I have) but I am only guessing. In any case the installer finished in the background without incident.
After installing iTunes I launched it as the Administrator, and everything work just fine. I then logged off and logged in as my user account and attempted to run iTunes. I got the license agreement window, clicked "Accept" and nothing happened, but again I noticed that the Network card and my NAS were being accessed. I launched "services.msc" to check, as you suggested, to see if my QuickTime service had started. Much to my surprise the service was not listed. So I figured, well if there is such a service that needs to be launched then perhaps launching QuickTime would start this service, (still baffled to why the service is not listed in Windows Services). I launched QuickTime, and while leaving QuickTime open I then attempted to launch iTunes. Much to my surprise it started! I then closed both apps and have attempted to start iTunes several times since with success. A crazy fluke but, the steps listed above seemed to work for me. I can only hope that it helps others out who may be experiencing the same issue.
So it seems that my issue has been resolved. Thank you for all your time and efforts on this matter, I do appreciate it.
Jamie

Similar Messages

  • Problem sharing iTunes with multiple Windows accounts

    My kids and I share a single computer via multiple user accounts. We also share a common iTunes account across all Windows accounts. When new songs or playlists are added, they appear in the other accounts.
    Recently, I had to create a new Windows account for my daughter. In iTunes, I went to Edit -> Preferences and changed the iTunes Media folder location to the shared folder. The problem is that none of the playlists came through, and when new songs are added, they do not show up in her account either.
    What could be causing this problem on just this account, and what is the possible fix?
    Thanks,
    Jeff

    If you create multiple user accounts on one computer but want the same music to be available in iTunes for all users, see iTunes: How to share music between different accounts on a single computer.
    The important stuff is near the bottom
    +To listen to another account's music files+
    +Open iTunes.+
    +From the iTunes menu, choose Preferences.+
    +Click Advanced.+
    +Deselect the "Copy files to iTunes Music folder when adding to library file" option.+
    +Click OK.+
    +From the File menu, choose Add File to Library.+
    +Note: Windows users can also choose Add Folder to Library to add a folder of songs.+
    +Navigate in the Add File To Library window to the location where the other user's music is saved (the iTunes Music folder in the case above).+
    +Click Open.+
    +Repeat these steps for each account that is listening to shared music.+
    +When another user of the computer has imported new music from CD, *repeat steps 6 through 8* to add the music to your library.+

  • Using iTunes with multiple Windows accounts

    A friend of mine has 2 Windows accounts on his Win XP machine. He uses iTunes on each account, but has his music in a shared location. If he has music playing in iTunes on one account and then uses Fast User Switching to log into the second account, the current song continues to play but the next song and every song thereafter will be very jerky. Like trying to stream music with a slow internet connection.
    Any thoughts.

    hiya!
    hmmmm. it might well be the Windows Fast User Switching causing his problem (although he isn't getting the usual problem i see associated with Fast User Switching):
    iTunes for Windows: about Fast User Switching with Windows XP
    love, b

  • Use itunes with multiple users on this computer

    Our laptop is used by both my wife and I. I set up itunes uder my profile. When my wife opens her profile on the laptop, itunes is empty as if it is only under my profile. How do I get Itunes to open when any user logs on to the laptop?

    you can put the music in the shared folder under users, but as far as profile each user has a profile, ITunes does not support profiles

  • Problem with iTunes and multiple user accounts in Windows

    I am running iTunes on a PC (Windows XP) and have multiple user accounts. When I switch between user accounts and try to open iTunes, I get a message that tells me I can't open the program because another user is using it. Is it really true that I can only have iTunes open in one user account at a time on a PC with multiple user accounts ?!? If not, what am I doing wrong?

    You are right, can only have one open. You have to log out of a user before logging in to another user to use iTunes. Do not use the fast user switching ability of Windows.

  • Migrate itunes from pc to mac with multiple user accounts

    I've read the numerous articles on transferring one's itunes library from a windows machine to a mac and I *think* I've got the details sorted (have itunes copy everything and then organize my library, then copy whole folder to external drive). I only have one itunes account but it my full library and itunes account is used across different windows user accounts.
    My mac is setup with multiple user accounts and I'd like to have a single library and single itunes account (same apps, etc.,). I'm not quite sure how to migrate the library from windows and then set it up on the mac such that all mac user accounts are sharing the same library and itunes account. Any guidance?
    Forgot to mention, have 2 iphones and 1 ipad as well, all attached to the same apple id.

    See these support documents:
    How to share iTunes between multiple accounts on a single computer:  http://support.apple.com/kb/HT1203
    How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

  • New Mac User: iTunes Auth with multiple user accounts

    With a Mac with multiple user accounts, does EACH user account need to have iTunes authorized, or is iTunes authorized for an entire mac machine?

    So then I assume that iTunes will know then if each of the computer's user accounts has a different iTunes account?
    When you authorize an iTunes account on your computer, the authorization info is stored in \Users\Shared\. When you run iTunes, it looks there to see if it can play purchases. The purchase account info is embedded into each purchased file.

  • 1 Apple TV 2nd Gen, Windows 7 Computer with multiple user accounts

    The issue that I am having is I have 1 Apple TV 2nd Gen and Windows 7 Computer with multiple user accounts.
    When I log onto my Windows user account, open up Itunes and turn on home sharing my Apple TV work perfect but if another family member switches to their Windows user account without logging me out, the home share shows up on Apple TV but it just says "Loading ... Library" and never loads.
    If we switch back to my user account, restart iTunes, everything is fine. Is there a way to keep my home share active in ATV2 across multiple user accounts? All of my video is under my account.

    You can home-share multiple libraries but only use one account at a time.

  • IMac with multiple user accounts "cannot associate apple id for ....."

    I have an iMac with multiple user accounts each with an Apple ID and individual iTunes library and Itunes match linking to iPhones iPads etc.
    I bought songs on my iPhone yesterday, on trying to listen to them on the iMac (my user account) this morning I get the "cannot associacte Apple ID for another 31 day" meassage.
    Is there any way round this? or is the answer only purchase via iTunes on the iMac in the individual account. Why do Apple do this?

    http://support.apple.com/kb/ht4627
    I'm guessing it's for piracy reasons.

  • Having trouble with multiple user accounts

    I am still getting used to Aperture and am having trouble with multiple user accounts on my Mac.
    My wife and I have separate accounts on our Mac, and both have Administrator rights. We keep our Aperture library in the "Shared" folder, and I have made sure that both she and I have read/write capabilities on the Aperture library.
    However, she has difficulty creating new projects, saving data, and viewing thumbnails in Aperture. Whenever she creates a project, it does not save into Aperture, and cannot be viewed by any user. In addition, changes she makes to photos do not save. She also cannot view thumbnails of any photos (although she can see the photos in the viewer).
    Are there any changes I need to make to the user accounts so she can have all these capabilities?
    Many Thanks.

    Rather than having the Aperture library reside in the shared folder, keep it within a folder residing at the top level of your mac, eg.
    I actually keep mine on one of my RAID disks.
    Tony

  • How do I share iTunes with multiple users on Mac mini?

    How do I share iTunes with multiple users on Mac mini?

    You have to turn on Sharing and then Authenticate Sharing on the other devices. You can have up to 5.

  • In trying to share music with multiple user accounts on one comp, I quit itunes, located my itunes media folder, moved it to a publicly accessible location. Problem is it didn't work and now I can't get it all back to the way it was.

    In trying to share music with multiple users on one computer, I followed the directions on "iTunes:How to share music between different accounts on a single computer" (http://support.apple.com/kb/ht1203). I did something wrong because i lost iTunes
    Tried to put files back, but it is not the same. Plugged in my ipod and it is not recognizing my computer.
    Can someone tell me where iTunes should be, and what sub files should be included with it. Thanks!

    If you are seeing the "Connect to iTunes" logo, then your device is in Recovery Mode, and you will need to restore it:
    If you can't update or restore your iOS device
    iOS: Back up and restore your iOS device with iCloud or iTunes
    Cheers,
    GB

  • Is there any information about using iCloud on a Mac with multiple user accounts (Mountain Lion)

    When upgrading to Mountain Lion, you are asked to sign in using your iCloud ID.  I don't understand how to set up the proper synching of "stuff" if your Mac has multiple user accounts, and they each have their own iCloud ID.
    The whole issue of supporting multiple users on a Mac and making everything easy to understand with regard to iTunes and iCloud is, in my opinion, currently in a state of disaster.  Apple needs to address this.  They have conveniently made it a non-issue on iPads by not allowing multiple users.  I can tell you that as one of the resident iOS and Apple experts in my office, most of the questions I get from others (not work-related) are on this topic.  It needs to be easier to understand and accomplish.
    Thanks in advance for any information you have on this subject.

    CS7981 wrote:
    is "Is there any benefit to using my Airport Express with my wireless router
    no.

  • Multiple Macs with multiple user accounts

    I have a Mac computer connected to airport and use Time Machine for backups. This works well.
    I have now purchased a second Mac and would like to include this second Mac so that I can move between Macs and work. There does not appear to be any mechanism to allow this.

    After searching the web and the discussion here, here's my minimal impact solution for multiple Macs with multiple users in a household:
    1) Set up Mac1 for myself only
    2) Set up Mac2 for the wife and kid
    3) Set up each Mac to backup to the Airport base station using Time Machine (this would create two separate backups on the Airport base station's drive, which from what I've read has its own problems)
    4) On Mac1 setup "empty user accounts" for the wife and kid. These will not have any files in them - just an access mechanism. If they want to access their files, they can use Time Machine's "The Browse Other Backup Disks Option" to get their file from Mac2, work on it and then drop it in the Shared Folder. Next time they are on Mac2, remember to copy the updated/created file from the Shared Folder into their Mac2 user account. If possible, get Time Machine to not backup the "empty user accounts".
    5) Do the same for me on Mac2.
    Not the most elegant solution, but until Apple get off their backside and make this seamless, I can't think of anything else :-( .
    P.S. iCloud is not a soluton since it costs hundreds of dollars a year, uses up intenet data allowance and is slow.

  • Using itunes with two users

    How can my wife and I use iTunes on one pc with two separate i-devices? And how can she move her library to another computer?
    Regards
    Mike

    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    iTunes: How to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - relocating iTunes' media folder to a shared area but leaving separate library files - extra tip at https://discussions.apple.com/message/17331189
    Chris CA's instructions on sharing one iTunes music library between multiple user accounts - https://discussions.apple.com/message/8974074 - Multiple users using a single library file - similar post at: https://discussions.apple.com/thread/3753008
    Note that a device will not like being synced with multiple computers.

Maybe you are looking for

  • Changes to multiprovider

    Dear Gurus, multiprovider got 10cubes and we added recently new cube to that we created some queries on the multiprovider when we run the queries it doest shown any data do we have to do anything after changes done to multiprovider. the queries for o

  • Timeline question

    I am using iMovie HD 5.0.2 (111). The story in my Timeline is complete. Yet the playhead keeps playing for about two extra minutes despite the fact that there are no more clips or audio. It's supposed to stop at the end of the sequence, correct? I th

  • How do i get contacts from iphone to merge with outlook contacts

    how do i get contacts from iphone to merge with outlook contacts

  • Again another 1097 error...

    Hello, For my project I have to call a function in a DLL. Its prototype in Basic is : Function xxxxxxx(ByRef arg1 As Long, ByVal arg2 As String, ByVal arg3 As Long, ByVal arg4 As Long, ByVal arg5 As Long, ByVal arg6 As Long, ByVal arg7 As String) As

  • Valid settlement rules

    We received a request from the business to block time entry charges for WBS with C* status. Also, block time charges for PM order and Network order if their settlement receiver WBS is in C* status. I was trying to find a transaction or functionality