Problem using NEW webcam...

OS win98SE.
Have successfully installed my new webcam Vista Plus Model: VF0090. I now have a problem using it!
As per instuctions, I go to WebCam Centre and press 'capture'. I then get a message along the bottom of the screen saying 'this device is not available, it may be used by another resource'.
I'm completely at a loss as to what the problem could be.
Any one out there who could help?
Regards
Sue

Got the same problem (1), in addition to the installer freezing (2).
(1) There seems to be a problem with the software - the driver is OK. I used it to record still pictures and movies with MS Photoeditor, Irfanview, WinTVCap and YahooMessenger.
I played around for hours at no avail.
---> Creative - fix that problem in both Cam Detector and WebCam Center!!!
(2) The Setup freezes, then when you kill it it comes up with a DOS window complaining about not enough resources (?!?!?!).
Work-around:
a - Run Demo.exe from the CD;
b - it asks for a *.dbd: look for "your region".dbd, e.g. europe.dbd
c - continue and it will install ...
However, do not know if the install process is correct, because of problem (1). My guess is that it is, and that the problems (1) and (2) are independent.
Again:
---> Creative - fix that problem in with the setup!!!
e.g., use a setup which is less "cool" but which is working.
Regards, Hans

Similar Messages

Problems using new embedding method

My embedded Quicktime movies don't always play correctly! The problem I am having is when I load the page - rather than playing the movie at the correct dimensions of 640x376 (16 pixels taller than the .mov for the controller), I get just the quicktime controller centered in my "theater" without a picture, as if it's been squashed. See if this happens for you as well at the link below. If it plays fine try reloading a few times, for me it goes back and forth between working and not working.
Here's a sample page with the problem I'm having:
http://www.ghostlightdigital.com/portfolio/prototype/train/low/
I've followed the instructions for "External JavaScript Solution Two" found in the doccument at http://developer.apple.com/internet/ieembedprep.html but am still seeing problems in my website. I have many videos on this website at varying qualities, but I stick to basic HTML with some javascript (the latter I am no good at).
Here is the movie file that should play in my page:
http://www.ghostlightdigital.com/portfolio/prototype/train/low/prototype-train-l ow.mov
Here's the code I've included in that page where the movie should play:
<script language="JavaScript" type="text/javascript">
QT_WriteOBJECT('prototype-train-low.mov', '640', '376', '',
"autoplay", "true",
"align", "middle");
</script>
Here's the code included in the <HEAD> tag of the page:
<script src="http://www.ghostlightdigital.com/portfolio/includefiles/ghostlight-quickti me.js" language="JavaScript" type="text/javascript"></script>
Here's the external Javascript file (unmodified since I downloaded it, except re-named):
http://www.ghostlightdigital.com/portfolio/includefiles/ghostlight-quicktime.js
Phew, okay! I've looked around these discussions and haven't found a solution. The same problem happens on my G5 using the same OSX and Safari. Can anyone tell me what I'm doing wrong? Thanks for helping!
-James
G5 Mac OS X (10.3.8) Safari 1.3.2 (v312.6)

The page loads just fine and both the low and high versions show a 640X360 video (plus the QT controller). Safari 2.0.4 and Tiger 4.7.
The page source code is correct. Your link to the "download" should include text that asks the visitors to right-click (Control-click) and choose to "save linked file". As it works now most visitors will only have you movie open in a new window if they just click the direct link. Only QT Pro users can save from this new window.

Problems using new nano during workouts

I bought my new nano for more capacity than my 1st gen, which still works fine. But the touch screen does not work as well for me as the clickwheel did. The best location for the nano is clipped to my waistband, and I can operate the clickwheel by feel, to change volume or skip or repeat selections, which I do frequently during long workouts. But the touchscreen goes to sleep, and in any case I can't find the controls without taking off the new nano and looking at the screen. Sweaty clothes rubbing over it also actuate the touchscreen menus sometimes. So I've given up on using it and have gone back to using my old nano. Too bad, Apple presents the new nano as a workout tool but it certainly doesn't work that way for me. I'll try to figure out some way to get rid of it and get a slightly older refurb-ed nano with a clickwheel.

I'm sitting at my computer right now with my 6th Generation Nano (Product Red) and my Ultimate Ears headphones and that adapter. I'm able to skip to the next song, return to the start of that song, pause, hear voiceover, raise the volume, lower the volume, ...Works like a champ and I've never had a problem with sweat getting into the switches when I used it with my 3rd Generation Shuffle OR with my 6th Generation Nano.
I do suggest you use Google and find a plastic docking plug for the Nano when you use it while working out. It says that about the adapter because that is what it was developed for. It will work just fine with the Etymotic.

Problem using new editor

Hi people! I hava a strange issue in my machine. I'm currently using SapGUI 710 patch level 7 in my PC. I'm trying to use the new editor, but when I set it and try to open any source codes in SE38 or in SE80 (source codes editor in general) the SapGUI freezes and the only way to get off this, is endind SapLogon with a right click on tray of windows.
Anyone already seen this? If I use the new editor in other machine with the same SapGUI and same server, its works fine...this problem is specific to my machine...
Thanks a lot!

Hi Jack
I encountered the same problem last week in upgrading from 710 Patch 5 to 710 Patch 9. Uninstalling and applying a previous patch to the last one you installed will fail also. Incidentally prior to installing Patch 9, I was happily editing source code in the new editor.
This is how I managed to resolve it:
Had a look around the net and found information on SAPSWEEP.EXE (created by SAP themselves). Used SAPSWEEP.EXE from the setup folder of SAP GUI 640 - this will remove Registry entries and files if you tell it too. I cleared everything at first. If you use this, pull the network cable on the machine in question just in case. It detected a SAP GUI setup I had copied to my Temp folder in case I lost network access, and did think about removing that however I stopped the program running at that point. So it may (I don't know as I did not want it to check the Network drives) delete install instances if you are not careful.
I then removed the following folders (due to the failed uninstall earlier):
C:\Program Files\SAP
C:\Program Files\Common\SAP Shared
C:\Documents and Settings\<my userid>\SapWorkDir
C;\Documents and Settings\<my userid>\Local Settings\Temp (all files removed)
Rebooted laptop.
Re-installed SAP GUI 710 Patch 0. Editing code worked at this point.
Re-installed SAP GUI 710 Patch 9 and still able to edit the code.
I believe my problem came about after a possible corruption involving LIBRFC32.DLL, but I then also lost network connectivity and the ability to acquire a DHCP delivered IP Address. I understand that in 710 the RFC methods have been enhanced, plus MS recompiled the LIBRFC32.DLL using Visual Studio 2005 (rather than .NET 2003).
I have not upgraded to Patch 10 (corporately we are evaluating Patch 9 for release).
Hope that helps to get you back editing again!
Nick

Problem using new ABAP editor in GUI 7.20

Hi Guys,
I need some help. I am running SAP GUI 7.20 on Windows 7 professional.
When I open the new ABAP editor from SE38 it does not open the mouse pointer keeps rotating for ever.
I tried changing the setting to ABAP Editor old. It did work this time, I could open the ABAP editor.
I also tried uninstalling and re installing the SAP GUI,but the problem persists.
Please suggest if anyone has a solution for this.
Thanks
Ramya

Hi
check OSS Note 1456628 This may be helpful [Click here|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1456628]
4.1.1.1 Fixed a CrossThreadException due to the change of the mouse cursor in the repair background worker. Fix an KeyNotFoundException in the construction of the tree in the edit form.
also did you try Installing MSXML 4.0 software as mentioned by Suresh Dareddy
[Ref Post|http://forums.sdn.sap.com/profile.jspa?userID=3753798]
Regards,
koolspy.

NSS326 Problems Using New SFTP Features

Is anyone else having issues using the new SFTP feature that was released in the 1.2 firmware? We are running firmware 1.3. When we try to connect to the NSS326 via SFTP, the only user that can login is "admin" and they get placed directly into the root of the device. We want to use the SFTP feature to backup Communications Manager (which requires SFTP) but being dumped into the "root" does not appear to give us access to the vast disk space on the unit, so the backup fails. Is there a way to configure the SFTP options, because the administration GUI only specifies FTPS (Explicit)? Thanks.

On my NSS326, I have a single RAID-6 volume and it's mounted under /share/MD0_DATA. Each shared folder is containted in that directory (i.e. Web), but is also symlinked to /share, so my Web content is available under /share/Web. If you create a new "backups" shared folder, for example, it should be available under /share/backups. You could try specifying that destination directory for your SFTP backups.

Problems using new version with many sites including facebook...how do I uninstall it NOW

Can't access a multi-list site for my business as a real estate agent...totally screwed up my chats on facebook...I want to uninstall this new version

-> [[Uninstalling Firefox]] - Uninstall your current Firefox
* REMOVE USER DATA AND SETTINGS
* Restart your system
-> Download latest Firefox version from one of these links using some other Web Browser:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/central/
* http://www.mozilla.com/en-US/firefox/fx/
* http://www.mozilla.com/en-US/firefox/all.html
-> [[Installing Firefox]]
Check and tell if its working.

Problem using new modem with TC

Hello all. I successfully set up a new AT&T DSL modem today which is working good when connected to my iMac. But when I connected it to the WAN on the TC things weren't working like before. Using AirPort Utility, I did a factory reset and while going through the setup routine, I got a message that I never saw with the old modem:
So I hit continue
Then update. After finishing and closing AirPort Utility, the iMac complained:
And of course I can't go online using TC. Any advice?

The message was right .. you should have put the TC in bridge mode.. you have smashed the setup by using double NAT and something is also using your address..
Shut down everything.. reboot in order.. modem.. TC.. computers. 2min gap for everything.
That should get rid of the IP conflict.. then do the setup again. This time follow the instruction to bridge the TC.

Weblogic 6.0sp2, problems useing new XML Registry

I'm trying to configure a parser other than the Built-In Parser, but WLS seems
to still us its default.
I follow the documentation at http://edocs.bea.com/wls/docs60/xml/xml_admin.html#1055027,
and use xerces 1.4.3, also creating a new server that is targeted.
I have attached a java file that I set as a startup class, targeted to myserver.
It shows the classname of saxparsers.
I allways get the following printout:
parserFactory: weblogic.xml.jaxp.RegistrySAXParserFactory
saxParser: weblogic.xml.jaxp.RegistrySAXParser
parser: weblogic.xml.jaxp.RegistryParser
But if I run the program from the command prompt, with xerces in the classpath
I get the following:
parserFactory: org.apache.xerces.jaxp.SAXParserFactoryImpl
saxParser: org.apache.xerces.jaxp.SAXParserImpl
parser: org.xml.sax.helpers.XMLReaderAdapter
Anyone now anything about this, seems like a bug?
-perotto
The parser
[PrintParserInfo.java]

hi,
try keeping the xerces.jar file before the weblogic.jar in the classpath of the
server script...
cuz' weblogic.jar file includes weblogic xerces parser..
but weblogic does not support all the features that xerces 1.4.3 version support.and
they(BEA) does not recommend to use other versions...
hope it will help you..
Vijay
"Per Otto Christensen" <[email protected]> wrote:
>
>
>
I'm trying to configure a parser other than the Built-In Parser, but
WLS seems
to still us its default.
I follow the documentation at http://edocs.bea.com/wls/docs60/xml/xml_admin.html#1055027,
and use xerces 1.4.3, also creating a new server that is targeted.
I have attached a java file that I set as a startup class, targeted to
myserver.
It shows the classname of saxparsers.
I allways get the following printout:
parserFactory: weblogic.xml.jaxp.RegistrySAXParserFactory
saxParser: weblogic.xml.jaxp.RegistrySAXParser
parser: weblogic.xml.jaxp.RegistryParser
But if I run the program from the command prompt, with xerces in the
classpath
I get the following:
parserFactory: org.apache.xerces.jaxp.SAXParserFactoryImpl
saxParser: org.apache.xerces.jaxp.SAXParserImpl
parser: org.xml.sax.helpers.XMLReaderAdapter
Anyone now anything about this, seems like a bug?
-perotto
The parser

Problems using new apple earbuds

I have just purchased and iPhone 5 and I'm unable to adjust the music volumes, play, pause, etc on the new apple EarPods.
Any help would be much appreciated!!

Yes. The only thing that won't work are the volume buttons.
http://support.apple.com/kb/HT3310

I phone 3 problem using new software

I am using iphone 3 just updated the latest software and it is hanged cannot come back also. please suggest how to get back my iphone to normal.
Thanks..

Hello ashharuddin,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Have a nice day,
Mario

Problem w/ Dell webcam monitor

I bought a Dell SP2008 LCD ws monitor w/ webcam recently, but my Mac Mini (running Parallel 3.0 & XP Home) has problem using the webcam. I spent 4 hours w/ the tech. guy at Dell, & he concluded that the chipset & audio drivers of the Mac Mini need to be updated/upgraded. His conclusion is based on the fact that the XP fails to update the chipset & audio drivers. I check the Support page of Apple but couldn't find any chipset or audio drivers download. Does anyone have the same problem as me? Any help will be appreciated. Thanks.

I personally don't use Dell Webcam Central. With my onboard dell camera lighting is always an issue when compared to my external cameras. There may be a setting in the software that might be adjusting the lighting that doesn't come across when using it in Skype. I also know that most onboard cameras have a poor ISO level. You might want to try the generic Microsoft drivers to see if conditions change. They have worked with my Dell onboard camera especially when the current drivers aren't fully compatible with Windows 8.x I have used either successfully in Windows 7.

Webcam problems using Messenger Live

I've just purchased a new S10-2 running Windows 7. When I've come to use the webcam to talk to my son using Windows Live Messenger I find that messenger displays my webcam video OK, however my son can't see or hear anything. The volume on the mic is turned up to full. His picture shows a pic of a webcam with a red cross through it, no video although I can hear him talking. I know his webcam is working, if I boot up my desktop everything is OK we can both get sound and video.
Anyone any ideas how to get this up and running

I have similar problems on an intermittent basis,
which I have always attributed to poor or inconsistent internet
band-width. Is your desktop wired and S10 using wireless?
If so, try your S10 with wired internet.
Or perhaps try a different way.
I've had better experiences using Skype,
Your son will need to load it too, of course

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

Do you get this window when you hold down the Command+Option keys and launch iPhoto?
If not then you're not holding down both keys long enough.
OT

Problem using NEW webcam...

Similar Messages

Maybe you are looking for