Problem using PC Suite via USB

I have a problem accessing my Nokia phone (E50) with PC Suite via USB, but since I pruchased it earlier on though, it never had this problem. My phone's connection settings via USB has been modified to let the phone be connected thru "PC Suite", and I have the USB wire that came with the phone. I had access to the contents of my phone just fine, until this week.
The problem is that the phone does connect, but my PC doesn't read any phone from the connection. I tried connecting the phone with four different USB sockets available, but no result. I tried reconnecting the phone with the USB wire, but it was futile.
Honestly, I do not know if the problem is from my phone or from the computer. My cousin, after all, came over for a slumber party during the weekend, and he visited websites that might have badware. [My computer restarts when I choose "Shut Down", it's working slowly at times, and it restarts if I bother downloading anything.] If anyone has an idea how I could resolve this connectivity problem, I'd most appreciate it.

Where this wonderfull place is located? I could not find out yet!
I should say that Nokia is to think more when making manuals on E71 et al/
Thanks ib advance

Similar Messages

Problem connecting C3-01 to OVI Suite via USB

I can't seem to successfully connect my C3-01 to the OVI Suite via USB.
The PC (running Vista) sees the device, but OVI Suite keeps complaining that I need to change the USB mode on the device to OVI Suite, although that's how I set it. OVI Suite also doesn't show the device under the update section. Does work when using Bluetooth though.
Any ideas what may be the issue with the USB connection?
Thanks!

I just bought Nokia C3-01 over the weekend and I have the newest version of OVI suit and I connect mobile and pc with USB cable click sync and nothing happens my mobile is still without pics and videos and music I'm trying to uplod on the phone?????
Sometimes it writes some contentn was not synced properly error code:80043bee and other times it says sync ok but nothing happens...no pics or video were transfered??
What's wrong??

E63 updating contents using PC-Suite via Bluetooth...

When updating my E63 contacts, calendar etc. using PC-Suite via Bluetooth, every update asks the phone "Accept connection request from PC?" This doesn't occur when using a cable connection but is a real nuisance when using Bluetooth.
Any way of automatically accepting the connection request?
Thanks,
Norm
Solved!
Go to Solution.

Where this wonderfull place is located? I could not find out yet!
I should say that Nokia is to think more when making manuals on E71 et al/
Thanks ib advance

Problem using PC Suite to connect to internet

Any help would be much appreciated.....I have searched support discussions as well as general web, and no fix is to be found. Here is the issue:
I have connected my new n900 to my PC (WinXP, SP2) via PC Suite. Instructions to connect to the internet (on my PC, using the n900 as a "modem") are to click on "Connect to the Internet" in PC Suite.
When I do this, I receive the message "No modem found!" and "Make sure you have installed Nokia Connectivity Cable driver software". All support articles advise that this particular driver software is already part of the newest versions of PC Suite though. Also, there is no option to "Select a Modem" and the Configure clickthru is not accessible.
I have gone into Device Manager on my PC, and tried to update Driver under "Nokia USB Modem"....it states that the "Drivers for this device are not installed. Code 28." Searching for driver and reinstalling driver produce the message "Windows was unable to install the modem" and then "An error occured during the installation of this device, A service installation in this section INF is invalid".
I have uninstalled all Nokia related software through the Control Panel and reinstalled via download from NokiaUSA.....twice. Keep getting the same errors.
I have deleted all USB root hubs in Device Manager in case there was a resident conflict from my old Nokia n80, with which I used an older version of PC Suite.
I've restarted WinXP after all uninstalls and reinstalls of PC Suite.
Nokia seems to think it should be "plug n' play" to use PC Suite for internet access on my PC, but so far it isn't.......at all!
I've read articles about limited support for the n900 in PC Suite, but it doesn't seem as if this is part of that since Nokia has a tutorial about how simple this should be... see here: http://www.nokiausa.com/get-support-and-software/software/nokia-pc-suites/how-to/connect-to-the-web
Again, any help would be appreciated! Thanks in advance.
Nhoi

Any updates on this? Its still a problem for me. Maybe someone else is having the same issue. Im using a bluetooth connection .. maybe I should try a USB Cable.
Screenshot
http://i114.photobucket.com/albums/n277/moontore/BackupFailed.jpgMessage Edited by trotter on 02-Jan-2007
05:40 PM

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

Samsung Fascinate, problems with playing music via USB port on car stereo

Before the update, I could play the music files on my Fascinate via the USB port on my Kenwood stereo, and control basic functions such as skip, pause etc. Now, my stereo does not recognize the device, and cannot read the files. I went to local Verizon store where a sales rep tried to connect it in here new Kia Soul and it didn't recognize the device either. It will play via the AUX jack, but I lose player control and the phone does not charge via the AUX cable. She did a hard reset which did not resolve the problem. We tried one of the other employee's Fascinate in my car, which did not work either.
So, after hoping to be able to stream music via Pandora, Jango etc thru the USB port after the update, now it seems its primary function is for charging.
Also, the ALL SHARE function, which I used to get the music on my phone originally, does not work now.
Anyone else have this issue with music player and USB connection?

txgopher- I have personally never used my Fascinate to listen to music via USB via stereo however, I can see why it would be frustrating for you to no longer be able to do so when it was never an issue prior to the update.
It sounds as though you and the store rep already did some troubleshooting by trying to duplicate the problem with another car, stereo and even doing the final troubleshooting step which is a master reset.
Since you have done all of the necessary troubleshooting steps to no avail, it most definitely appears as though the software update has interfered with that USB connection in some way.
What I have done is forwarded the information you have provided to Samsung in order for them to look into this concern as well as come up with a way to get this resolved.
Please stay tuned because as soon as we hear back from Samsung we will be sure to update this forum with the results/findings.

IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks

Problem: BB 8700g - connected via USB to my PC but not visible on Windows Explorer

when I connect my 8700 g (OS 4.5 / DTM 5.01) to my PC via USB and open the Windows explorer I exspected to see there the device , I don't!!!
I would like to "drag and drop" *.mpg-or *. jpg-files from my PC to the BB device (such as ring tones or photos)
Other smart phones are recognized , I can see them as drive E or F etc, and if I click on e.g. E, I see the contents of E and am thus in a position to transfer the files to the place I want.
So what have I got to do in order to make my device visible and ready for the work I described?
I hope I made myself understood and would appreciate you helping me solve this problem, thank you

Hi!
Here is the list of troubleshooting atricles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Conecting to TK-Suite via USB / serial conection

Hi we are trying to connect to a AGFEO phone system using TK-Suite software the connection on the AGFO is a PC style serial port I have tried a serial to USB adaptor (from CEFC) but my mac book cannot see any port activity.
Thanks Gary

What Agfeo Model is this? You can connect some older Models directly via USB (AS3X). Others work fine via Prolific chipset based USB connectors. Make sure Yo have the right settings in Network for your new USB-Serial Controller (in advanced - Manufacturer: NullModem 9600bps - no compression, ignore dialtone).
In TK-Suite's (current 3.3.2.0) TK-Set make sure to choose proper PASSIVE serial connection at 9600 no Parity 8bit 1stopbit.
TK-Server and Client works fine for me. Unfortunately no Universal Binary yet, plus remember to quit the App manually or your Mac will not shutdown.

Stop the Trust My Computer msg for my work computer that I only use for charging via USB

I only use my work computer to charge my iPhone 5 via USB. Worked fine with iOS6, but now everytime i plug it in I get the "trust this computer" message, which I say "trust".
But it shows up again when if I plug it back in. I dont sync with anything via USB (incl iTunes) on my work computer, It is only a USB based charger for this purpose.
Any way to prevent?
Thanks.

Mavericks has had a lot of compatability issues and are slowly being fixed. This is why I haven't upgraded yet.
Either downgrade back to Mountain Lion or just wait for a software fix.

Replaced hard drive and used Recovery Manager via USB but now I don't have a D:recovery partition.

I replaced my bad hard drive on my G62 Notebook and used HP Recovery Manager on a USB stick. Afterwords I restored from a back up but couldn't restore the D:recovery portion because the new hard drive doesn't have this partition. How can I create this now and restore the recovery partion now?

Hi,
When you reinstall the operating system using the USB recovery stick, it should create by default a recovery partation Drive D. Since you wont be able to create the partation manually. So if the HDD which you had replaced is not matching with the exact HDD which was shipped in the system, then it would have caused the issue. So try reinstalling the OS again.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Problem using different plugins via OBJECT tag

Hi all,
before installing JRE 1.5.0_06 everything was well. I had 3 different JREs (1.3.1_02, 1.3.1_08, 1.4.2_06) installed on one Windows system which could be invoked in Internet Explorer 6 for an applet as described in http://java.sun.com/j2se/1.5.0/docs/guide/plugin/developer_guide/version.html
example:
<HTML>
<HEAD>
<TITLE>Java Plugin 1.3.1_08</TITLE>
</HEAD>
<BODY>
Java Plugin 1.3.1_08:�
<OBJECT classid="clsid:CAFEEFAC-0013-0001-0008-ABCDEFFEDCBA" width="150" height="25">
Plugin missing
<PARAM name="code" value="HelloWorld.class">
</OBJECT>
</BODY>
</HTML>
(Note: The output of my HelloWorld class is the VM's version number.)
After installing 1.5.0_06 it doesn't work anymore. The new 1.5.0_6 is always used. Does anybody have a clue?
Thanks in advance
Peter

I've seen a similar problem that didn't seem to exist with JRE 1.5.0_05 but does with 1.5.0_06. On the JRE 1.5.0_06 workstation the Windows registry contains CAFEEFAC-... entries for what looks to be all 1.3/1.4/1.5 JREs and points them all to the 1.5.0_06 JRE plugin dll, even though there is still a 1.4 JRE on the workstation. So even when you specify an OBJECT tag with a classid such as classid="clsid:CAFEEFAC-0014-0001-0010-ABCDEFFEDCBA" that should load the 1.4 plugin by design, the 1.5 plugin is loaded. This seems to defeat the multi-version JRE support. The JRE 1.5.0_05 workstation on the other hand didn't overwrite CAFEEFAC-... Windows registry entries for previous JREs, and properly loads a specfic JRE's plugin when specified by a CAFEEFAC-... classid in the OBJECT tag.

Use PC internet via USB cable on n97mini

How can I use PC internet on my s60v5 device, this was possible on s60v2 by using custom COM ports and a software. Is it possible to achieve this on s60v5?

Ok.. Reverse tethering over USB .
May want to check your Windows sharing options/settings and the network adaptors settings
Also make sure all the drivers are properly installed and USB debugging in turned on.
The issue is Windows related. Maybe this VIDEO will help .
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem using a NETGEAR wg111v2 USB wireless adapter

The adapter wad recognized by the system. It was using the rtl8187 module. When I type iwconfig, there is an entry of wlan0. The result of "iwlist scan" looks to be just right. But when I type "iwconfig wlan0 essid ...", the link quality, signal level are all 0. However, in the result of "iwlist scan", these values are non-zero.
Then I started to wonder maybe rtl8187 is not totally compatible with this card. Therefore I installed ndiswrapper, and downloaded the inf files for nearly every version NETGEAR has supplied. I followed the instructions in http://wiki.archlinux.org/index.php/Wir … diswrapper . After I disabled rtl8187 and enabled ndiswrapper in rc.conf, "iwlist scan" begins to show no meaningful results at all. Sometimes it finds a "managed" source with essid "", sometimes it just finds nothing. no other results have been found.
I am confused...
How should I handle this? Any other one has similar experiences?

Yes, "Access Point: Not-Associated".
In dmesg's result:
wlan: authenticated
wlan0: associate with AP 00:18:3a:ae:d0:74
wlan0: associate with AP 00:18:3a:ae:d0:74
wlan0: associate with AP 00:18:3a:ae:d0:74
wlan0: association with AP 00:18:3a:ae:d0:74 timed out
Where else should I look at to find interesting logs?
It's now the rtl8187 module. So how, normally, should I handle this?
Thank you for your reply
Last edited by xuehuichao (2009-01-12 00:20:17)

Any way way to use Migrations Assist via USB?

Trying to suck stuff from drive from a dead PowerBook (drive's fine) to new MacBook, and of course
only option is Target Disc Mode by FireWire.
And only way I have of connecting the old drive is by USB. Bet not.
Guess I'll just create a partition from unused space on the HD, clone the old HD over and Migrate from there.
Never mind...
p2

That's the ticket.

Problem using PC Suite via USB

Similar Messages

Maybe you are looking for