Problem when i publish my web site with muse
i have an erreur inconnu when i want to wruite my pass word
i had changed my adobe ID
it is reconise by BC
Yes i had restart Muse and my mac. I have no more message than a red hexagon with an exclamation point and the message : "erreur inconnue" no number nothing more.
Best regards
Le 8 mai 2014 à 16:24, Aishvarya Raj Rastogi <[email protected]> a écrit :
I can't publish my web site with Muse because of an "error inconnu . I have my ID Adobe and my pass word. But i have an error message " erreur inconnu" Business catalyst tell me that my ID and pass word are ok. so wath ?
created by Aishvarya Raj Rastogi in Help with using Adobe Muse CC - View the full discussion
Hi,
Have you tried restarting Muse and your computer? If not, please try it. If you still face the problem, please provide us the complete error message and we'll look into it.
Regards,
Aish
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6365165#6365165
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
Similar Messages
-
How to publish custom web site with own domain name?
Hey out there. I wonder if anyone can give me any tips on how to publish a web site with my own domain name.
I have a web site I'm building and I want to purchase a domain name and then publish the site using that domain name.
I know how to buy a domain name. I have a .mac account so I'm hoping that .mac can host the site. What I don't quite understand how to do is get .mac to host the site using that domain name. I looked through Apple Support but couldn't find what I was looking for. Just wondering if anyone has been in this situation. Thanks in advance.
Dave
[email protected]Dave ~ Welcome to the discussions. .Mac was re-branded as MobileMe last July. If you're not building your site with iWeb, it's considered to be a "custom" website. These Apple docs may help:
MobileMe: How to publish a custom website
iWeb ’08: Using your own domain name
...Use this search page to find such documents:
http://support.apple.com/kb/index?page=search
Note that you don't need to have iLife '08 to be able to direct your domain name to your custom website published to MobileMe. As someone wrote on another thread:
"My personal domain is linked to my MM but i don't even have ilife on my mac. When you go to the options in MM to link your personal domain to your MM it provides directions that will guide you with setting up your godaddy settings."
...Where "MM" is MobileMe here:
http://me.com/account
...+Personal Domain+ tab, and "godaddy" is wherever your domain name is registered. -
I registered with a web site and used the name Kostas as the log on name. Entered a question and recieved replies
When I later tried to log onto the web site to say thankyou ,and enter Kostas in the log on box a reminder appears created by Firefox of kostas, I ignore this, move to the password box and firefox changes the log on name to kostas with small k. The register is case sensitive so for quite a while I could not understand what was going wrong? I eventually managed to log on by using a rival system
My previous experience is that if you use a different log on name it is recorded and then you choose the correct one to use? But in this case I am given no choice
How can I correct this please
Probably no connection but
I registerd with another site and recieved an e-mail in which I had to click on web address to confirm registration and came up with an error message, tried a few times and same thing happened?? The webmaster of this site had no record of my registration details?
Finally I had a phone call from a company called NERD-I.com
offering to solve various computor problems at a fee. I did not take up their offer, but hope they do not have anything to do with my current problems??
Many thanksHi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert -
In the past I have been able to access web sites that require certificates pulled from a common access card inserted into a card reader attached to my Mac. Since I have updated to the newer version of Firefox, the sites that I am trying to gain entry to are not recognizing either the card, card reader or those certificates. If I use Safari or my work computer, the sites recognize my card and certificates and I am grated entry. I would use Safari but I like the format of Firefox for the specific tasks that require the access card. Just looking for a solution. Firefox does open other sites just fine. It's just the ones that require the card, reader and certificates.
Anything here:
* [[/questions/808161]] Trying to use a CAC smart card reader with Mac version of Firefox
* [[/questions/752709]] Having problems configuring FireFox to use a CAC reader -
I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL? -
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
Problems deploying VS 2005 Web Site with Crystal Reports
If it's not one assembly reported missing, it's another. Runs fine on my local machine, but can't deploy to a test environment on my company's server. How can I force crystal to install everything on the server that is needed so that my clients (end users) can run this report?
We are not running Crystal RAS.
When I set up my msi, I made sure to set it to take assemblies from my local machine. Yet, my local machine does not seem to contain all of the assemblies that it needs. They're not showing up in the bin anyway.
I am using non-embedded report files (as you can see from my code below) so that I can change reports on the fly, if necessary without recompiling the entire app.
I am using the ReportDocument object.
Error as follows (when run from any desktop) in IE.
Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 21: 'Server.MapPath(strPath)
Line 22:
Line 23: crMissing218 = New ReportDocument
Line 24:
Line 25: Dim file As String = Server.MapPath("\reports\CrystalReports\crmissing218.rpt")
Source File: C:\Inetpub\wwwroot\MicsaReports\Missing218s.aspx.vb Line: 23
Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' could not be loaded.
=== Pre-bind state information ===
LOG: User = NT AUTHORITY\NETWORK SERVICE
LOG: DisplayName = CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
(Fully-specified)
LOG: Appbase = file:///C:/Inetpub/wwwroot/MicsaReports/
LOG: Initial PrivatePath = C:\Inetpub\wwwroot\MicsaReports\bin
Calling assembly : CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304.
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Inetpub\wwwroot\MicsaReports\web.config
LOG: Using host configuration file:
?\c:\windows\microsoft.net\framework\v2.0.50727\aspnet.config
LOG: Using machine configuration file from C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\config\machine.config.
LOG: Post-policy reference: CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/Temporary ASP.NET Files/micsareports/aa1e0492/7939610/CrystalDecisions.ReportAppServer.CommLayer.DLL.
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/Temporary ASP.NET Files/micsareports/aa1e0492/7939610/CrystalDecisions.ReportAppServer.CommLayer/CrystalDecisions.ReportAppServer.CommLayer.DLL.
LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/MicsaReports/bin/CrystalDecisions.ReportAppServer.CommLayer.DLL.
LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/MicsaReports/bin/CrystalDecisions.ReportAppServer.CommLayer/CrystalDecisions.ReportAppServer.CommLayer.DLL.
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/Temporary ASP.NET Files/micsareports/aa1e0492/7939610/CrystalDecisions.ReportAppServer.CommLayer.EXE.
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/Temporary ASP.NET Files/micsareports/aa1e0492/7939610/CrystalDecisions.ReportAppServer.CommLayer/CrystalDecisions.ReportAppServer.CommLayer.EXE.
LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/MicsaReports/bin/CrystalDecisions.ReportAppServer.CommLayer.EXE.
LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/MicsaReports/bin/CrystalDecisions.ReportAppServer.CommLayer/CrystalDecisions.ReportAppServer.CommLayer.EXE.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.]
CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +0
[TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.]
CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0
Missing218s.Page_Load(Object sender, EventArgs e) in C:\Inetpub\wwwroot\MicsaReports\Missing218s.aspx.vb:23
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Any help with this would be most appreciated. Is there a KB that deals with deploying a VS 2005 WEB SITE with Crystal?
Thank you,
BobOkay. So I installed the correct MSMs, opened the deployment document that came with it entitled, "Crystal Reports for .net Framework 2.0 - Deployment using Merge Modules" and got to page 4. At the bottom of page 4. It had me create a new Web Setup Project. The MSMs are included in the project, as they should be.
On page 4, #7, it says "Build the project."
#8 says Run your development setup.
There are 3 panes on my VS interface (4 including the Solution Explorer). To me, they look like they need the information regarding what Web Site this is to deploy.
I don't see any instructions on how to do this. I just blew away my old MSIs that I created because the previous document said not to use them.
So, how do I add my Web Site to these panes?
Thank you for your help with this.
Bob -
Question
HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.
-
Multiple Web Sites with Personal Domain Names - Overview
I have read through the last 10 pages of these discussions and have almost worked this out, but I need some help.
Problem:
I want to publish and edit two separate web sites with their own, individual, personal web addresses
from the same user account on the same Mac using iWeb '08 (2.0.2) and my .Mac account
_So far:_
I have purchased and registered the two domain names (with Cheap-DomainRegistration.com)
I have configured the CNAME to point to web.mac.com, and "Set up a Personal Domain" in iWeb successfully, but using a separate Mac for each web site.
The two sites work great.
_What (I think) I need to know:_
(excuse me for copying these posts out, but I can't find a way to link them to this post)
1) Should I be using iWebSites as suggested by Old Toad (posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
2) Should I be using Mireille's approach (also posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
Yes you are correct in the thought that with a family pack you can use different accounts and that is the easiest way to upload with one click to .mac. But it is still possible to publish differents sites to one .mac account if that is all one has. Even if the sites are in one domain file each purchased mysite.com domain name purchased can be pointed to a different page in the site
Look at it this way
Original Poster has
site1 page 1 page 2 and so on
then he/she has brothersite page 1 and so on.
They each have a domain name purchase wherever
then site1domain.com is forwarded to site 1 page1
and brotherdomain.com is forwarded to brothersite page 1.
Even though both sites are in the same file they do not have anything to do with each other.
This is one possibility there are others but for a novice user this could be the way to go for simplicity.
(Mireille, if you're there, can you clarify what you said - thank you)
3) Would I use Roddy's fix (posted Jan 23 in response to canadensis' "Publishing Multiple Websites?")?
Here's an example of how you can separate two websites that are on the same domain file.
Quit iWeb
Create a new folder on your desktop and call it "iWeb Sites".
Inside this folder create two more - Website A, Website B.
Go to Home Folder/Library/Application Support/iWeb and copy your domain file - command C
Paste this into folders A and B - command V - and also paste a copy of it somewhere else - like in Docs - in case you make a mistake!
Double click the domain file in the folder Website A - this will launch iWeb.
In the left column, delete site B, save and quit iWeb.
Double click the domain file in the folder Website B to launch iWeb.
Delete website A, save and quit.
Drop the iWeb sites folder into your Home Folder.
If you want quick access to this folder you can highlight it and do command L to create an alias to leave on the desktop.
From now on, to launch any site in iWeb you open its folder in the iWebsites folder and double click the domain file.
This is not necessary when you are working on only one site as iWeb saves the domain file of the last site you were working on to Home Folder/Library/Application Support/iWeb. When you open the iWeb application, the last site you worked on will be launched.
Summary:
I'm not sure if some of the answers in previous discussions allow for personal domain names, which is what I need.
I would be very grateful for any suggestions as I'm getting bogged down.
Many Thanks,
JeffWhen you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
Am I way off?
All help gratefully received,
Jeff -
An error occurred while publishing file "/Web/Sites/iWeb/Jim and Steph's Si
I'm guessing this is a common message most see when they try to publish their website. Reason I say this, is it is the only message I have recieved in the last week when trying to use this faulty software.
Here it is again if you missed it:
An error occurred while publishing file “/Web/Sites/iWeb/Jim and Steph's Site/Jim's Blog”.
I got this MacBook week ago yesterday. Totally excited to share pictures and blog information. Spent 99 dollars or close to it for a mac account to simply share this information on the web. The first four pages (all pictures), I published worked well. Then I updated to iWeb 1.1.1 and tried to publish with blogs and more pictures and it won't work. Now all that I published before does not even come up. I emailed support here on mac.com and got the generic reply that I have already read on this forum. I tired as many fixes as I could to no avail. Two questions:
1. Any ideas to fix this problem?
2. Can you get your money back?
Sorry this was so long.
Thanks everyone,
Jim BJim...
Try doing a "Publish All to .Mac" if nothing else works for you. And if I could make a recommendation, it probably wouldn't be a bad thing to simplify your site name (Jim and Steph's Site) and eliminate the apostrophes (also in Jim's Blog). A longer site URL with complexities such as punctuation and spaces and even capitalization can potentially wreak havoc on your site navigation and function. Simplifying your site and page names will at the very least lead to shorter and more recognizable URLs...and when you start to add more pages it will also make the navigation menu at the top of your pages look "cleaner". Think simple names, like "oursite" and "HeSays" or "SheSays"
Just a suggestion. -
Publish Error - An error occurred while publishing file "/Web/Sites/iWeb/X"
Hello everyone,
I've been using mac for about 10 years now and have finally decided to try out this iWeb application. Spent several hours putting the site together... fun... but when I hit the publish button, the following error popped up.
Publish Error
An error occurred while publishing file "/Web/Sites/iWeb/X". (X being my site name which also happens to be my .mac account name.
So I've spent another 3 hours trying it over and over again but still no luck. So I've searched this forum and see if there's any tips. Found a lot of solutions but none of them seem to help. I've deleted all the folders and file on my 'Sites' folder on the iDisk. Closed all running apps before hitting the 'Publish' button. And I've even deleted all my work and tried just to upload the 'welcome' page. Still doesn't work.
I'm getting a bit annoyed... Are there any solutions for my problem??
I'm using a PowerBook G4 12" 1.33GHz Mac OS X 10.4.9 with iWeb 1.1.2
Any help will be greatly appreciated! Thanks in advance!!
88kin
PowerBook G4 12" 1.33GHz Mac OS X (10.4.9)Probably not. No big deal, really. The important thing is we have been able to get your site on the .Mac server, albeit in the homepage directory.
Ok here's your last assignment. This will also take awhile, but when you are finished your site will be up on .Mac and accessible using the web.mac.com/username/iWeb/sitename url.
Since you have already initiated a publish to .Mac from iWeb, the root directory for iWeb should be on your iDisk. You should be able to navigate to the iWeb folder following this path:
Go/iDisk/MyiDisk/Web/Sites/iWeb/SiteFolder
"SiteFolder" should be a folder named for the site you are having trouble publishing.
On your desktop, open the Site folder that iWeb delivered when you published the original site using the Publish to a Folder... command. You will see a number of folders in there and a number of page.html files. Drag each of these into the Site Folder mentioned earlier, on the iDisk. (The one named for the site). The root index.html file, (the one published outside of the Site folder) needs to be placed in the Web/Sites folder; you should see it in the column above the iWeb folder when done. Basically, you are "manually" uploading your site. It's cumbersome and a royal pita, but if successful, this exercise will confirm what I have suspected all along:
The problem is a latency/time-out error. (The actual error message itself is misleading and somewhat immaterial--iWeb probably chose it randomly). Lots of things contribute to it, but basically, iWeb gets tired of waiting on the WebDav protocol and then generates an error message. I wish I could be more specific, but that's about as close as I can get to the core issue. Many folks publish successfully from your area of the world; just keep trying, and when all else fails, you can always swap out the changed files manually following the method outlined above. -
An error occurred while publishing file "/Web/Sites". Try publishing again
Any ideas - I have been getting this since the move to ME. Systems logs on to Mac.com then immediately comes up with this error - An error occurred while publishing file “/Web/Sites”. Try publishing again later.
I hope that you're now able to publish?
Unfortunately I'm not.. and I'm really getting fed up. I'm first to admit I'm technologically-challenged (which is why I prefer Apple to PCs because they're far more user friendly) but I've tried the things I've seen mentioned in other threads.. such as ensuring the .me update has been done, successfully published to a folder, etc.. When I publish (I only have the 'publish to mac', not 'publish to me' option) the creating log bar progressed to the half way mark before disappearing. Suddenly another box pops up to say that my site will begin publishing. It doesn't. Instead 'iweb unexpectedly quit'. It doesn't make a difference whether I've published to mac, published all to mac or simply clicked the publish button on the bottom left. While 'creating' the buttons turn blue but once it quits and I re-open/relaunch they're back to being red. As I am unable to get through to the online chat support (several unanswered messages and now it's completely unaccessible) I'm hoping someone else can suggest what I try next. It's been almost 2 weeks and I love iweb but am at the point of wanting to cancel my membership. Help!
Signed,
Computer Illiterate -
IWEB An error occurred while publishing file "/Web/Sites/iWeb/t etc etc
An error occurred while publishing file “/Web/Sites/iWeb/testsite/workfiles/DSC04544.jpg”.
this is the message i get every bleeding time I try to update my page. anything I can do, or is it just the mac crew that have buggered up thier RUSHED update.
angry mac fan.yes - I have just done it - I tried to publish again
and got the same error, but on a different file...
bummer - this is really fustrating
This problem has been floating for several days already. There was a previous forum 'iWeb Publishing Nightmare' which ran over 4,500 people participating in comments and sharing their problems. Many had proposed solutions ending with more frustration among MacUsers.
All I did was downgraded back to 1.0 and shall wait until a fix is at hand. Use your original installer and choose custom, then select iWeb only.
I use iWeb for my work particularly every hour ... uploading work to clients. So I can afford time wastage here. I don't use or need 'Comments' nor the extra 6 new templates. My entire site is running over 100 pages with several sites.
dreamery
http://web.mac.com/joeleong/iWeb/dreamery/home.html -
i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file? -
I am looking to publish a web site I created in iWeb to another hosting provider. I have never published this site to MobileMe nor do I have a MobileMe account. Can someone please help me?
Hi Larry, no experience with iWeb, (which is ending soon), but what kind of files & folders does it make locally?
You need a Wb Hosting service & an ftp client, if you need more info reply with that & what kind of files/folders it made.
Maybe you are looking for
-
Finder - Get Info - changing "Open With"
In the Finder, I accidentally changed the default application specified to open a .nib file. How do I change it back to <NONE>. It is a system file. Powerbook G4 Titanium (DVI) Mac OS X (10.4.4)
-
Please help!
-
hi mates, Plese give me some clues for some of my questions. I stored xml file data as xmlType in oracle database. I am also using struts 2 for the project. I wanna retrieve that whole xml file in the form of string and send them to the client html t
-
How to reduce size of html files with JAVA?
We have html files full of tab char, carriage return, blank space between tags etc. We need to reduce the size of this files. HTML files are automatic generated by an engine and we cannot operate on it. Those files are in a solaris environment and we
-
Some help here would be great... I tried today to transfer a Aperture Slideshow from my iMac to my Macbook Pro via firewire. I read up how to do it and seemed to have everything set up right with Sharing - I was able to access the laptop in Finder on