Problem when saving the outline

Hello:
We're working with Essbase 9.3.1.
When saving an outline with EAS, the message windows "Starting save of outline" appears and it never close (even if the modification is as simple as adding an alias or an UDA). We've found that If we make Ctrl+Alt+Supr and press cancel in the client machine, the message disappear inmediately. So, it seems a Java problem. Does anyone knows any solution for this issue?
Thanks in advance and regards,
Joaquin Castellano

Hi,
I take it you are accessing EAS through the web client, if you it will probably down to using the 1.6 JRE.
You can install the 1.5 JRE and go to control panel > java > Java > disabled the 1.6 versions and keep just the 1.5
Or you can have a read [here |http://john-goodwin.blogspot.com/2008/09/never-ending-eas-outline-save.html] for futher details
Ok?
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Problem in saving the outline.

Hi
i'm running with a problem.
i have deleted the members of a dimension in my outline and now i'm loading it again by build files. when i am trying to save my outline it displays "Unable to complete reading from outline. Out of memory".
can anyone tell me the reason behind this?

Recommendation: use a default/template outline that has not been edited too much (one that doesn't have the members in that dimension to begin with).
Then, with the data cleared, you can unload the database, copy the outline over, and then perform your dimbuild against this outline, and reload your data.
There are caveats to this approach, but you should be able to test this process out and make it work for you.
The other approach is to save/unload/reload the database between removing members and rebuilding them, although this won't solve the problem of the "ever expanding outline" issue.

Problem when saving the Data basis for the Consolidation

Hi Gurus,
I am having 2 problems.
1) When i try to execute the UCWB transaction . It gives an information message
" Data basis DB needs to be generated (after upgrade) . I am following the procedure given in that "<b>Run maintenance of data basis DB in display mode. Go to the "Data Streams" tab page. Choose the "Generate" button.
If changes to Customizing settings are permitted in the current system or client, as an alternative you can maintain the data basis in change mode and save. In the case of systems supplied with Customizing transports, as an alternative you can generate the data basis in the source system and then transport it again.</b>
Even after doing that procedure when i again execute the UCWB. it give me the same message.
2) when is try to save data basis for the consolidation . it give me this error message.
"Field 0HC_ATCCODE: This compound differs from that of basic field 0HC_MEDCTG"
I have checked the referenced Info objects . Checked the compound info objects. Activated them again. They dont differ in any way. but still i get this problem.
Please help me out. If someone has come across this error and solved. Please help me.
Regards
satish

Hi satish,
I constantly receive the message like your #2 saying that it was a critical change in X infoobject. It's just a warning and I found several OSS notes saying that this message is not correct. Just ignore it.
In case of your Q #1. The data basis might be generated in two ways: by pressing Save icon and by clicking the Generate icon (the system refers just to this very option) and then - Save. The last way is used in Productive environment. Try it.
Hope this helps.

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Inserting Pricing condition in Sales order when saving the sales order

Dear ABAPers,
My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
How to do this.
Thanks & Regards,
Ashok.

Dear ABAPers,
I have Solved this Problem.
Thanks & Regards,
Ashok.

Problem when saving form in web dynpro abap application in se80

Hi,
I am trying to develop an adobe application. When I save the form which i have designed.
I get the "error" unable to convert data and the transaction is terminated.
I dont have any idea why.
Help
Thanks,
Harish

Hi
Are you getting the problem while saving the Adobe form or while saving the webdynpro application.
Could you please elaborate your problem.
Regards
Naresh

Problem While saving the Invoice

Dear Experts,
                  I am facing the Problem while Saving the Invoice, In invoice, We assigne the Output as RD00 and Medium as 6 (EDI).
When we are saving the Invoice, it getting as ' Updated Terminated'. When i found where the Error is coming in SM13, it showing in as Function Module "RV_MESSAGE_UPDATE' & Error Details is 'EAN11 not found for Material'.
                 But in Invoice whatever we enter the Material number, we maintain the EAN11 code. This EAN11 code is seen in MARM & VBRP Table. Unable to find the what the exact error is.
               please help me to sort this issue, Its business complicated.
Thanks in Advance,
Srini

Hi Asik,
          Thanks for your valuable Message.... I run as you suggested, but the dispatch time i kept as 1 or 2. because the program RSNAST00 is picking the values only for 1 or 2. so i run manually,, as of now the issue is, in the invoice number, for one material number, the Billed quantity is zero, so the UOM is getting as initial. From those vaues we are picking the EAN11 from maram table.
So, i modify that and run the EDI manually. As of now its working...
          Thanks for your reply,,,
Regards,
Srini

Problem when saving business partner on creation or changing

When i create a business partner in fmcac1 it is taking an eternity when saving. i am also encountering the same problem when saving changes in transaction fmcac2. its hanging when i click the save button but if i terminate the job the changes woul have been made. what might be causing the problem.
When i terminate the process am getting the message as shown below
Dev: SAP System message
Panic: Unrecoverable errors occured

well there are really many possibilities for that.
have you once waited, if the task will finish?
if it does finish i would suggest to do a SQL-Trace with TA ST05.
If this is possible, the performance trace will show you quite by detail where your process time is beeing used.
To find out why so much time is used in that position then is another thing.
But once you got the problem identified you should be able to exlude some reasons like (inperformant selects or such).

Problem when saving an order after using userexit_save_document

Hi
We are doing an enhacement in sales order capture, and we have next problem, after saving the order, the change of adding the new order is not saved in CDHDR table with the I (of Insert), that's only one problem, but I have another worst , after I use exit save_document, I'm saving data in a Z table, and debugging the program, when I finish the exit save_document the Z table is Ok saved, with the correct data saved, but when I pulse F8 to make the order being complete saved, something is happening because the Z table changes its values as if I run the VA02 , but I'm still in VA01 finishing the saving of the new order, It's very weird, and I don't know if somebody has experimented something like this, please let me know, because its very Urgent!!
Thanks
Regards
Soraya

Hi,
To have the changed values being reflected in CDHDR, for the fields you wanted to track the changes- In Ztable, AT Dataelement level, In FURTHER CHARACTIRSTICS tab check the box CHANGES DOCUMENT, if you check this checkbox then this becomes the pre requisite for the CDHDR entires. Then in SCDO trnsaction try to cretae a Change document object for this table.
I think the table is not locked for entires. For this table provide the authorization checks then we can restirct others to enter the value into the table.
Try to use Authorization objects or LOCK related Function modules like ENQUEUE and DEQUEQUE.
Reward if helpful.
Best Wishes,
Chandralekha

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

Is it possible when saving the psd file to have an automatic jpg file saved at the same time?

My work involves preparing images for printing lightboxes and window installations. My clients require to pre-approve the photos before printing.
I usually save my files as psd but since the files are very large in this format I usually save another copy as a jpg file that has a much smaller file size. This makes it possible for me to add these to a presentation and and send them to my client.
Is it possible when saving the psd file to have an automatic jpg file saved at the same time? Or do I still have to do this manually?

If you save the document manually as a PSD file in Phtoshop not from within an Action, Script, Plugin or Droplette. You may be able to write a Photoshop that would do as save as Jpeg, And you should be able trigger its execution by setting up a Script Save event using the Script event manager. When You do a manual save the script should be triggered. I wrote may be able to for I have never tried to write that script or set up a Script Manager Save event. I have only use open events.

User Exit or BADI for Tcode IW31 when saving the Service Order

Dear ABAPers,
I would like to add one more line in Service order item when saving the Service order in (IW31).Is there User Exit or BAdI.It is very Urgent Please help me.
Thanks & Regards,
Ashok.

Dear ABAPers,
These Exits does not meet my requirement.
These Exits are not called at the time of saving Service Order.
Thank you for your valuable reply.
My Requirement is when saving the service Order i want to add the Line itm at runtime.
It is very urgent requirement.Please help me.
Thanks & Regards,
ashok.

User Exit or BADI for IW31 when Saving the Service Order

Dear ABAPers,
I would like to add one more line in Service order item when saving the Service order in (IW31) at runtime.Is there User Exit or BAdI.It is very Urgent Please help me.
Thanks & Regards,
Ashok.

Hi
U can go through the tansaction.
System/ Status
Double click on program name.
For badis:
Search for the Phrase:
cl_exithandler=>get_instance.
U will the badi definitions.
For User exits:
search for the phrase: CALL CUSTOMER-FUNCTION
u will get the user exits.
If it is helpful rewards points.
Regards
Pratap.M

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

Problem when saving the outline

Similar Messages

Maybe you are looking for