Problem when using About Operator in Contains Query

Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
  id           NUMBER(10)      NOT NULL,
  name         VARCHAR2(200)   NOT NULL,
  description  VARCHAR2(4000)  NOT NULL,
  price        NUMBER(7,2)     NOT NULL
ALTER TABLE my_items ADD (
  CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
      1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
      1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
      0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
      0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AM

Hello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Error when using "inlist operator" in the query filter of Webi 3.1

    Hi,
    We are currently in the process of migrating Deski to webi (BOXI 3.1).
    The problem is, Deski is using the "inlist" operator which is working fine but after migrating to webi the inlist operator in the query filter is throwing the below error,
    *Error Message :*
    A database error occured. The database error text is: ORA-00907: missing right parenthesis. (WIS 10901)
    Appreciate your assistance on this.
    Thanks !
    Regards,
    Perialt

    Karthik ,
    Yes I am seeing an additional paranthesis in Webi SQL query.
    For example plz consider the product table below,
    SELECT
    Product.ID,
    Product.Name
    FROM Product
    WHERE
    Product.Name IN ( @Prompt('4) Name:','C','Product\Name-M',multi,free)  )
    As a work around in Custom SQL, If I remove the paranthesis the below query is running fine in webi
    SELECT
    Product.ID,
    Product.Name
    FROM Product
    WHERE
      Product.Name IN  @Prompt('4) Name:','C','Product\Name-M',multi,free) 
    But I want a permanent solution.

  • Problem when using SDO operations

    Hello everyone,
    I'm trying to execute some spatial SQL queries and I've come up with a problem: If I enter the following query, the spatial operation (in this case SDO_INSIDE) is executed perfectly and data is returned:
    SELECT SUM(fact.quant) as SUM_quant, instalacao.name as Name
    FROM fact, instalacao, layer_region, emissao
    WHERE fact.instalacao_id = instalacao.instalacao_id AND fact.emissao_id = emissao.emissao_id AND SDO_INSIDE (instalacao.glocal, layer_region.geom)='TRUE'
    GROUP BY instalacao.instalacao_id, instalacao.name
    ORDER BY instalacao.instalacao_idHowever, if I introduce another GROUP BY element, like this (Where 'emissao' does not have any spatial information, and is not used in the spatial operation) :
    SELECT SUM(fact.quant) as SUM_quant, instalacao.name as Name
    FROM fact, instalacao, layer_region, emissao
    WHERE fact.instalacao_id = instalacao.instalacao_id AND fact.emissao_id = emissao.emissao_id AND SDO_INSIDE (instalacao.glocal, layer_region.geom)='TRUE'
    GROUP BY instalacao.instalacao_id, instalacao.name, emissao.poluente
    ORDER BY instalacao.instalacao_idthe database apparently gets "stuck" in a loop, and when I cancel it I get the following error:
    ORA-13268: error obtaining dimension from USER_SDO_GEOM_METADATA
    ORA-06512: at "MDSYS.MD", line 1723
    ORA-06512: at "MDSYS.MDERR", line 8
    ...I can't understand what I'm doing wrong as the "emissao" table is not used in any spatial operation.
    Any ideas please?
    Thanks in advance,
    ~Ruben

    Although I'm not a 'Spatial guy', maybe you can interprete the action you need to take on the error:
    ORA-13268: error obtaining dimension from USER_SDO_GEOM_METADATA
    Cause: There is no entry in the USER_SDO_GEOM_METADATA view for the specified geometry table.
    Action: Insert an entry for the destination geometry table with the correct dimension information.
    (http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e12700.htm#sthref3918)

  • Performance problem when using in operator

    Hi,
    I have two tables (master - detail): NETZ - NETZPART (detail table).
    The following query is very slow:
    select NP.*
    from NETZPART NP join NETZ N on N.NETZID = NP.NETZID and N.ISVIRTUELL <> 'T'
    where NP.NETZID in (40446621,40446622)
    order by ACHSSEGMENTID, STARTDISTANZ
    I tried different changes but it's always slow (left join, without join)
    I have primary key indices on both tables and an index for NETZPART (NETZID).
    What am I doing wrong?
    cu Christian

    Welcome to the forums!
    With the information provided we can't really say much. Please visit these threads and provide the requested information.
    {message:id=9360002}
    {message:id=9360003}

  • Problem in JDBC , when using LIKE operator. - VERY URGENT

    Problem in JDBC , when using LIKE operator.
    LINE 1 : String temp = "AA";
    LINE 2 : String query = "select * from emp where EMPNAME like '*temp*' ";
    LINE 3 : Staement st = con.createStaement();
    LINE 4 : ResultSet rs = st.executeQuery(query);
    '*' character is not getting evaluated. In MS ACCESS2000 only * is accepted instead of '%'. Moreover in MS ACCESS the like operator has to be used within double quotes as a String. whereas in other databases, it accepts single quotes as a String.
    Ex:
    In MS ACCESS
         select * from emp where ename like "*aa*";
    Other Databases
         select * from emp where ename like '%aa%';
    In my situation iam passing a Variable inside a like operator and '*' is used.
    For the above Scenario, Please help me out.
    If possible Kindly let me know the exact Syntax.
    Please give me the answer as LINE1,LINE2,LINE3,LINE4,
    I have verified in JDBC Spec also, it has been specified to use escape sequence.that too did not work.
    Due to this, My project is in hold for about 4 days. I could not find a suitable solution.
    Please help me out.

    I made a LIKE clause work with M$ Access, using PreparedStatement and the % wildcard:
                escapeStr                   = "%";
                String sql                  = "SELECT USERNAME, PASSWORD FROM USERS WHERE USERNAME LIKE ?";
                PreparedStatement statement = connection.prepareStatement(sql);
                statement.setString(1, ("user" + escapeStr));
                ResultSet resultSet         = statement.executeQuery();
                while (resultSet.next())
                    System.out.println("username: " + resultSet.getObject("USERNAME") + " password: " + resultSet.getObject("PASSWORD"));

  • How to use 'about' operator in Full text search query?

    Hi all,
    I have to search the following string in full text index using 'about' operator.
    'Advertisment(Cosmetics) Assets'
    If use the following query
    SELECT keyword_id
    FROM mam_keyword_languages
    WHERE contains(fts_text_uc, convert('about(Advertisment(Cosmetics) Assets)',
    'WE8MSWIN1252', 'WE8MSWIN1252')) > 0
    ORDER BY nlssort(text, 'NLS_SORT=EEC_EUROPA3')
    It gives following error.
    ERROR at line 1:
    ORA-29902: error in executing ODCIIndexStart() routine
    ORA-20000: Oracle Text error:
    DRG-50901: text query parser syntax error on line 1, column 37
    How can i do this search? Is there any other way?
    Thanx in advance.
    T.Umapathy

    Sum((postab.subtotal)*(loc.royalty)/100)
    Is there any other way to take product of two
    attributs? your help will be greatly appreciated as
    it is really stumbling block in my project. Thanks in
    advanceSuch a stumbling block should have inspired more activity on your part.
    I'd try rewriting it like this:
    sum(postab.subtotal*loc.royalty/100)[/b]%

  • NLS support problems when using AL32UTF8 in dads.conf

    Hello,
    Following a post by Joel Kallman, in one of the forum threads, about the mandatory use of AL32UTF8 in dads.conf, when running HTML DB v2.0, I changed my PlsqlNLSLanguage parameter accordingly.
    Prior to the change, I experienced some problems when using non-English characters – some application items appeared as gibberish when contained non-English characters, and the LIKE operator didn't perform as expected. After the change, it all seems to work OK, but now I have a different problem.
    All the non-English characters in my HTML page source code appears as gibberish. On screen, at run time, everything display correctly, but the source code seems to be corrupted. It is very difficult, and very annoying to debug the pages that way. Is there a way to enjoy both worlds – Using AL32UTF8 in the dads.conf, as required, and still getting a coherent HTML source code, containing non-English characters?
    Thanks,
    Arie.

    Joel,
    I use the following settings and they work fine for me:
    Operating system:
    LANG=de_DE
    LANGVAR=de_DE.UTF-8
    NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    daust:oracle[o1020]> uname -a
    Linux daust.opal-consulting.de 2.4.21-37.EL #1 Wed Sep 7 13:35:21 EDT 2005 i686 i686 i386 GNU/Linux
    daust:oracle[o1020]> cat /etc/redhat-release
    Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
    daust:oracle[o1020]>
    marvel.conf:
    <Location /pls/htmldb>
        Order deny,allow
        PlsqlDocumentPath docs
        AllowOverride None
        PlsqlDocumentProcedure wwv_flow_file_manager.process_download
        PlsqlDatabaseConnectString localhost:1521:o1020
        PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
        PlsqlAuthenticationMode Basic
        SetHandler pls_handler
        PlsqlDocumentTablename wwv_flow_file_objects$
        PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
        PlsqlDefaultPage htmldb
        PlsqlDatabasePassword @BZvJYqadreElOqj5poCB5gE=
        Allow from all
    </Location>
    Database:
    daust:oracle[o1020]> sqlplus "/ as sysdba"
    SQL> select * from nls_database_parameters;
    PARAMETER                      VALUE
    NLS_LANGUAGE                   AMERICAN
    NLS_TERRITORY                  AMERICA
    NLS_CURRENCY                   $
    NLS_ISO_CURRENCY               AMERICA
    NLS_NUMERIC_CHARACTERS         .,
    NLS_CHARACTERSET               WE8ISO8859P1
    NLS_CALENDAR                   GREGORIAN
    NLS_DATE_FORMAT                DD-MON-RR
    NLS_DATE_LANGUAGE              AMERICAN
    NLS_SORT                       BINARY
    NLS_TIME_FORMAT                HH.MI.SSXFF AM
    PARAMETER                      VALUE
    NLS_TIMESTAMP_FORMAT           DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT             HH.MI.SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT        DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_DUAL_CURRENCY              $
    NLS_COMP                       BINARY
    NLS_LENGTH_SEMANTICS           BYTE
    NLS_NCHAR_CONV_EXCP            FALSE
    NLS_NCHAR_CHARACTERSET         AL16UTF16
    NLS_RDBMS_VERSION              10.2.0.1.0####################
    Using AL32UTF8 resulted in the same problem as described ( and fixed ) here: Re: Strange - HTML not written correctly
    So, what is the proper configuration of the DAD, perhaps there are different ones for Unicode instances and non-Unicode instances.
    ~Dietmar.

  • ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

    ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
    1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
    TABLE NAME - EMP
    Item Containing PRIMARY KEY - P2099_EMPNO
    Primary key column - EMPNO
    By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
    2) Created a HTML region. Within this region add
    text item P2099_FIND_EMPNO
    Button GET_EMP to submit
    Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
    If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
    I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
    EXIST (SQL query returns at least one row)
    select 'x'
    from EMP
    where EMPNO = :P2099_EMPNO
    But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
    Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
    Any ideas?
    Thanks Pete

    Hi Mike,
    I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
    0.05: Computation point: AFTER_HEADER
    0.05: Processing point: AFTER_HEADER
    0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
    0.05: Show ERROR page...
    0.05: Performing rollback...
    0.05: Processing point: AFTER_ERROR_HEADER
    I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
    Thanks Pete

  • TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

    i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site  to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
    I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
    I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
    i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
    i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
    saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
    i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
    does anyone have a sollution?

    Type '''about:support''' in the URL bar and hit Enter.
    Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
    If you do have that, click on '''user.js file''' in this sentence. <br />
    ''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
    Does that "different homepage" appear in that user.js file?

  • Using XML Operation Tags to query by date

    Problem 1:
    When I use timestamps from items' XML to form queries on repositories, I receive SQL errors.
    Problem 1 Example:
    Query the PublishingRepository to find all active projects created on August 16.
    In Dynamo Administration, navigate to /atg/epub/PublishingRepository
    In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
        <query-items item-descriptor="project">status = "Active" AND creationDate = "08/16/2013"</query-items>
    Result: java.sql.SQLDataException: ORA-01843: not a valid month
    Problem 1 Solution:
    Use this query instead:
    <query-items item-descriptor="project">
    status = "Active"
    AND
    creationDate = date("2013-08-16")
    </query-items>
    Problem 2:
    Using the "<" operator to construct a less-than argument doesn't work.
    Problem 2 Example:
    Query the PublishingRepository to find all active projects created before August 16.
    In Dynamo Administration, navigate to /atg/epub/PublishingRepository
    In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
        <query-items item-descriptor="project">status = "Active" AND creationDate < date("2013-08-16")</query-items>
    Result: SOURCE:org.xml.sax.SAXParseException: The content of elements must consist of well-formed character data or markup.
    Problem 2 Solution:
    For some reason, the ">" greater-than operator seems to work fine, even when the "<" less-than operator won't. You can switch around the order of the query to get the desired result:
    <query-items item-descriptor="project">
    status = "Active"
    AND
    date("2013-08-16") > creationDate
    </query-items>

    Problem 1:
    When I use timestamps from items' XML to form queries on repositories, I receive SQL errors.
    Problem 1 Example:
    Query the PublishingRepository to find all active projects created on August 16.
    In Dynamo Administration, navigate to /atg/epub/PublishingRepository
    In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
        <query-items item-descriptor="project">status = "Active" AND creationDate = "08/16/2013"</query-items>
    Result: java.sql.SQLDataException: ORA-01843: not a valid month
    Problem 1 Solution:
    Use this query instead:
    <query-items item-descriptor="project">
    status = "Active"
    AND
    creationDate = date("2013-08-16")
    </query-items>
    Problem 2:
    Using the "<" operator to construct a less-than argument doesn't work.
    Problem 2 Example:
    Query the PublishingRepository to find all active projects created before August 16.
    In Dynamo Administration, navigate to /atg/epub/PublishingRepository
    In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
        <query-items item-descriptor="project">status = "Active" AND creationDate < date("2013-08-16")</query-items>
    Result: SOURCE:org.xml.sax.SAXParseException: The content of elements must consist of well-formed character data or markup.
    Problem 2 Solution:
    For some reason, the ">" greater-than operator seems to work fine, even when the "<" less-than operator won't. You can switch around the order of the query to get the desired result:
    <query-items item-descriptor="project">
    status = "Active"
    AND
    date("2013-08-16") > creationDate
    </query-items>

  • Performance problem when using CAPS LOCK piano input

    Dear reader,
    I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
    Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
    Thanks and regards,
    Tim Metz

    Does your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?

  • TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

    Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

    search google for "iphone remove picture from contact"

  • When using FireFox I often cannot view pictures in Hotmail, but have no problem when using other browsers

    When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers

    Do you also have this issue if you temporarily switch to Private Browsing mode?
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Select: [X] "Always use private browsing mode"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    See also:
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords

  • Coercion problem when using Shared Variable

    I have a curious coercion problem when using Shared Variables.  I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached).  I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef.  So far, so good.  I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef.  However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable.  Why?  How do I get rid of the dot?  [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
    On a related note, the code seems to work.  This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator.  So it does appear to work.  The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
    Bob Schor
    Attachments:
    Coercion Problem1.zip ‏38 KB

    Hello Bob,
    I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
    If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
    Enjoy the holiday
    Regards,
    Erik J.
    Applications Engineer
    National Instruments

  • Problem when using IE9

    We use IE9.
    I enter in https://gwserver.
    Compose New mail (in Plain Text mode) with body:
    Line-1
    Line-2
    Line-3
    And send this mail , for example to itself.
    the received letter will look like:
    Line-1Line-2Line-3
    Someone has the same problem?
    Serg

    Are you guys still on the shipping code of GW 12? Novell had a fix for this within a couple weeks of GW 12 being released from what I remember. Open an SR and get the latest code.
    Or simply tell your users to user HTML.
    Todd Bowman
    Todd Bowman
    Senior Network Analyst
    University of Minnesota Physicians
    612-884-0744
    [email protected]
    >>>
    From: MarkDissington<[email protected]>
    To:novell.support.groupwise.2012.web-access
    Date: 5/24/2012 6:46 AM
    Subject: Re: Problem when using IE9
    skoltogyan;2197344 Wrote:
    > The solution is?
    >
    > Serg
    I would guess don't use IE9 until a fix is released? :-)
    M.
    MarkDissington
    MarkDissington's Profile: http://forums.novell.com/member.php?userid=27611
    View this thread: http://forums.novell.com/showthread.php?t=455634

Maybe you are looking for

  • Not Playing/Previewing Songs On Desktop

    I used to be able to have a song on my desktop, after it was downloaded or just moved there, to be able to play the whole song on the desktop without opening up itunes. I would simply scroll over the song on the dektop and a Play icon would appear an

  • 60W Power Adapter - UK compatible?

    Hey guys, I have a quick question that I'm sure most of you would be able to answer, I hope. I am bringing my laptop from the US to the United Kingdom and was wondering if my 60W adapter for my macbook pro would work? Also, in the same note, should I

  • Problems with videos

    Hi, I recently bought an iPod video, but when i went to try and put some videos on it, the video either wouldnt even go into iTunes or an error message would come up saying "iPod was not able to copy this video." Can someone help please??

  • Data not saving in Custom Infotype

    Dear Experts, I have created a custom infotype, 9003, for this I creates a structure ps9003. And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field. Now this key field was not coming in the infotype screen,

  • Wrong values in distributed column in CJ40

    Hi experts, I am carrying out cost element planning in CJ40 against one child level wbs (level-2)and also the cost is flowing from cProject to another child level wbs(level-2). But after saving the costing data distributed amount at the parenet level