Problem while Adding the SAP Web service in Visual Studio 2005

Hi all,
I have created the web service thru SOAMANAGER.
Now I am just trying to access that web service in Visual Studio 2005.
I am not able to access...
Please give me the procedure , if any body knows.
-Balajee Jeyaraj.

- Start Tcode SOAMANAGER
- Now it depends on your setup, you might have to press "Logon" and.......logon
- Click tab "Business Administration"
- Click "Web Service Administration"
- Choose "Service" for "Search by"
- Enter a search pattern (E g Z*) and press "Go"
- Mark the line of your web service
- Press "Apply Selection"
- Click the link "Open WSDL document for selected binding"
- your web browser opens.
- copy and paste the link into Visual Studio.
I'm always adding    &wsdl=1.1     at the end of the link.

Similar Messages

  • Create BCS External Content Type or a list based on a WCF Web Service using Visual Studio

    Hi ,
    How to create a BCS External Content Type or a list Based on a WCF Web Service using Visual Studio.
    The link provided here shows the requirement through Designer. http://msdn.microsoft.com/en-us/library/office/ee556431(v=office.14).aspx but I want this to be through VS code..
    Please help ..Appreciate your help..
    Thanks,
    Satheesh

    HI Sateeshlt,
    You can see the below link also;
    http://www.fabiangwilliams.com/2013/10/14/part-2-of-3-blog-update-on-sharepoint-bcs-with-full-crud/
    Best Regards,
    Brij K

  • Problem when calling the XI web service

    Hi all ,
    I have configured the XI web service and generated its WSDL file. Following is the URL generated from XI webservice creation wizard.
    http://server:50000/XISOAPAdapter/MessageServlet?channel=:BS_B2B_ECOMMERCE_PORTAL:CC_SOAP_SND&version=3.0&Sender.Service=BS_B2B_ECOMMERCE_PORTAL&Interface=http%3A%2F%2Feur%2Fcs%5EMI_TradeAsset_Master_Request_Syn
    When the web service being called by the clinet application (Java application) we are getting the error
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/NW04S_14_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    Has anybody faced this problem b4 ??

    >>When the web service being called by the clinet application (Java application) we are getting the error
    where this error comes? In sender application usuing WSDL file?
    Do check the URL it should be as per the standard.
    You can also call WS from NWDS also. Else you can use SOAP client like Altova XML spy or something else.
    Thanks
    Farooq
    Edited by: Farooq Farooqui on Aug 1, 2008 12:59 PM
    Edited by: Farooq Farooqui on Aug 1, 2008 1:10 PM

  • Handshaking problem while invoking a secured web service

    Hi,
    I have developed a web service. I made my WLS 7.0 secured, using SSL. Also
    I made the
    my web service accessible only by https protocol. Also I configured the WLS SSL
    to have one
    way SSL. The problem is I am not able to access this web service using a swing
    client, It throws
    an exception saying some Handshaking exception. This problem occured only when
    I made
    the web service secured (https).
    Has anybody faced this problem ever?.
    For one way SSL do I need to supply any certificate file or PEM file from the
    client to the
    server?.
    Thanks,
    Anish

    Hi Anish,
    No, in this case the client is checking the cert provided by the
    server. Have you tried the flag
    -Dweblogic.webservice.client.ssl.strictcertchecking=false on the client
    side?
    Also take a look at the entry by Michael Jouravlev, on SSL "how to"
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.webservices&item=1910&utag=
    Have you gone through the simpleSSL example:
    http://webservice.bea.com/simpleSSL.zip
    HTHs,
    Bruce
    Anish wrote:
    >
    Hi,
    I have developed a web service. I made my WLS 7.0 secured, using SSL. Also
    I made the
    my web service accessible only by https protocol. Also I configured the WLS SSL
    to have one
    way SSL. The problem is I am not able to access this web service using a swing
    client, It throws
    an exception saying some Handshaking exception. This problem occured only when
    I made
    the web service secured (https).
    Has anybody faced this problem ever?.
    For one way SSL do I need to supply any certificate file or PEM file from the
    client to the
    server?.
    Thanks,
    Anish

  • Problem setting up the UCP Web Service

    I am new to CISCO and my first project is to set up the UCP Web Service.  I don't have access to the web interface on ACS but I was told that acs config-web-interface ucp enable was run. 
    I have in the UCP file on tomcat
    C:\Tomcat 7.0\webapps\ROOT\UCP
    within the UCP file I have :
    META-INF
    pythonImport 
    pythonUCP
    WEB-INF
    index.jsp
    wsdl.xml
    With that set up I get to the index.jsp page.  When I put the information in I get the following error message:
    HTTP Status 404 - /UCP/UcpServlet
    type Status report
    message /UCP/UcpServlet
    description The requested resource (/UCP/UcpServlet) is not  available
    I am sure I have done some sad and strange things.  Can someone point me in the right direction?  A simple stupid one at that...
    Thank you so much

    Hi,
    Is there solution for this issue? I also have encounter similar problem:
    An error occurred at line: [14] in the generated java file: [C:\Program Files\Apache Software Foundation\Tomcat 7.0\work\Catalina\localhost\_\org\apache\jsp\indexacs_jsp.java]
    Only a type can be imported. com.cisco.nm.acs.mgmt.common.version.VersionFileReader resolves to a package
    An error occurred at line: 23 in the jsp file: /indexacs.jsp
    VersionFileReader cannot be resolved
    It's seems there is a missed library (VersionFileReader) for JSP, does anyone can guide me to find it?
    Thanks,
    Rp

  • Delayed response while calling the process web service

    I have four managed servers in a cluster and the ip addresses are
    managed_server_1 -20.20.40.21
    managed_server_2 -20.20.40.22
    managed_server_3 -140.20.40.23
    managed_server_4 -140.20.40.24
    The admin server is on 20.20.40.21
    I start the managed server from command prompt using the commant
    ./startManagedWeblogic {name of the managed server} {admin console url} ie
    i start managed_server_1 from 20.20.40.21 unix box by going to {weblogic installation}\bin
    and running the following command (we have some issues with the node manager so have been using this
    method)
    ./startManagedWeblogic managed_server_1 http://20.20.40.21:17003
    similarly i start the other servers from their respestive unix boxes
    managed_server_2 from the 20.20.40.22 unix box using the command ./startManagedWeblogic managed_server_2 http://20.20.40.21:17003
    managed_server_3 from the 140.20.40.23 unix box using the command ./startManagedWeblogic managed_server_3 http://20.20.40.21:17003
    managed_server_4 from the 140.20.40.24 unix box using the command ./startManagedWeblogic managed_server_4 http://20.20.40.21:17003
    all these servers are in the cluster named BPM_cluster and the bpmengine is deployed onto this cluster
    when i deploy the application to the bpmengine it gets properly deployed onto the servers
    and i could see the process web services getting generated
    but when i try to call these webservices for each managed server seperately
    the response from managed_server_1 and managed_server_2 takes leass tha 2 secs
    but the response from managed_server_3 and managed_server_4 takes about 25 secs
    I am not able to figure out why us taking so long from the managed servers 3 and 4
    the bpmengine ds and directory ds have the cluster as targets (I also tried to point to all the servers in the cluster even that
    didnot work). I feel that there is db connectivity issue from the servers but i am not sure how to check that.
    Can anyone help me with this ?
    Thanks

    Please make sure that your solman box meet the software prerequisit as per this note below
    1483508 : Solution Manager 7.1: Root Cause Analysis pre-requisites
    This will solve that ptoblem .
    Best Regards
    Jai Wardhan

  • Problems with Web Services in Visual Studio

    (Cross-posted from WAS forums)
    I'm using VB.NET to access SAP BAPI's via web services from a 4.7 system. This works really well (and in my view is simpler than the .Net connector) until I try and add a Web reference to a SAP web service that returns a BAPIRET2 structure - as soon as I add the reference, I get a load of "Reference to a non-shared member requires an object reference" errors - one for each line in the BAPIRET2 definition that VS automatically adds.
    Specific Example (guess who's been using OSS too long!):
    1. Browse the R/3 Web Service Repository at:
    http://yourmachinename:8000/sap/bc/bsp/sap/WebServiceBrowser/search.html
    2. Search for BAPI_USER_GET_DETAIL, click the small "wsdl" link.
    3. Copy the resulting URL, in VS add a web reference and type the necessary security details
    4. Immediately in the task list 15 build errors show - one for each line of the BAPIRET2 definition.
    Would be very grateful for any help on this!
    Thanks
    Martin Dolphin
    Bentley Motors Limited
    [email protected]

    Did you ever get this figured out?  I am having exactly the same problem in code generated by VS, with the BAPIRET2 structure.
    Any help you could provide would be greatly appreciated.
    Thanks!
    Leighton Wingerd
    Adirondack Solutions, Inc.
    [email protected]

  • Error when adding BI XMLA service as a web service in Visual Studio

    I have Visual Studio 2003 and I am trying to add the XMLA web service via a URL using Add Web reference.
    Visual Studio is able to locate the service and methods but I also  get the following error message. Can anyone help with this issue. Thanks in advance for your assistance.
    message in left panel indicates it found the methods
    "MsXmlAnalysis" Description
    Methods
    Discover ( RequestType As string ,  Restrictions As ,  Properties As )
    Execute ( Command As ,  Properties As PropertiesType )
    actual error message in right panel
    There was an error downloading 'http://bid01.citus.sharp.com:8000/sap/bw/xml/soap/xmla?sap-client=100'.
    The request failed with the error message:
    Moved Temporarily !DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"

    Hi,
    Thanks for posting here.
    Upgrading Web and Business Databases
    Upgrading Web or Business databases to a new service tier/performance level does not take the database offline. The database will continue to work through the upgrade operation. At the time of the actual transition to the new performance level temporary
    dropping of the connections to the database can happen for a very small duration (typically measured in seconds). If an application has transient fault handling for connection terminations then it is sufficient to protect against dropped connections at the
    end of the upgrade.
    Upgrading a Web or Business database to a new service tier involves the following steps:
    Determine service tier based on feature capability
    Determine an acceptable performance level based on historical resource usage
    Why does existing performance for my Web or Business database map to the higher Premium levels?
    Tuning your workload to fit a lower performance level
    Upgrade to the new service tier/performance level
    Monitor the upgrade to the new service tier/performance level
    Monitor the database after the upgrade
    Refer:
    http://azure.microsoft.com/en-us/documentation/articles/sql-database-upgrade-new-service-tiers/
    https://msdn.microsoft.com/en-us/library/azure/dn741336.aspx
    Hope this helps you.
    Girish Prajwal

  • Consuming Web Service In Visual Studio

    Hi there:
    I'm using the sneak preview of SAP NetWeaver 2004s ABAP Server and am able to consume in Visual Studio 2005 (C#) all the 'delivered' Web Services without any problems.  However, when I create a Web Service through SE37 or SE80 (Wizard WS_WZD_START) using a BAPI or Remote enabled RFC (ie RFC_READ_TABLE) I am getting a error when I try to call it in Visual Studio.  In Visual Studio, I am able to add the reference (http://localhost:8000/sap/bc/srt/rfc/sap/ZRFC_READ_TABLE?WSDL) no problem.  When I call it though, I get {"Unable to connect to the remote server"}, with inner exception {"No connection could be made because the target machine actively refused it"}.
    I am providing the credentials (username and password) in the code which are the same as when I go to retrieve the reference.
    Any help would be greatly appreciated.
    Thanks
    Russ

    Hi Russ,
    I had similar problems. You should download the WSDL file to the local file system. Then you can add the downloaded WSDL file as a Web reference rather than using a URL.
    Please note the following issue:
    You have to provide the full qualified path <b>including</b> the file name in the text box for the URL and then press Go.
    For example:
    <i>
    C:\Documents and Settings\USERID\My Documents\downloads\SAP\WebServices
    Z_BAPI_CUSTOMER_FIND_VI.wsdl
    </i>
    If you just provide the path and try to select the WSDL file this probably does not work. At least it was not working for me.
    Best regards,
    Andre

  • Fault messages in target web service (microsoft visual studio) -experience?

    Hi guys!
    We use async scenario : SAP_R3 (ABAP Proxy) -> XI -> Web Service (SOAP). Target web service is created in microsoft visual studio. Standard scenario worx fine. We send data from r3, the web service processes them. However, we want to use also fault messages in case, there will be exception rised in the target web service and let operator in sxmb monitor know, that there's a problem. These fault messages should be used as acknowledgement. But we have serious problem with implementing fault messages in the target web service in the visual studio. Does someone have experience with this?
    Thanx a lot for info!
    Olian

    Hi
    see the below links
    Consuming XI Web Services using Web Dynpro – Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
    Consuming XI Web Services using Web Dynpro – Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0d7349b6-0901-0010-ddbe-ec43178a61ff
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
    Troubleshooting SOAP Message - XI - /people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
    Troubleshooting - RFC and SOAP scenarios-/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
    Regards
    Chilla

  • Problem while testing a ABAP Web Service

    Hello,
    I'm facing a problem while testing a webservice for the BAPI BUPA_CENTRAL_GET_DETAIL. I have opened the Web Service Home page, and I get no error. I fill in the input values and then when I send the request, I get back an error which says "Authority check failed"
    Urgent help needed..
    Thanx,
    Anupama

    you need s_service and s_object authorization objects in your role.
    its explained in this document
    section 3.1 on page 7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/92d80512-0a01-0010-32a3-cd3735bd9275
    Regards
    Raja

  • Error occured while Adding a reference Web Service(BizTalkServer2009_Tutorial2)

    Hi,
    I was going through the Biztalk tutorials. While doing the second tutorial of web service I got stuck while adding reference to the Web Service.
    Steps I did:
    Add service reference(by right clicking my project) --> Advanced -->  Add Web Reference -->  URL : http://localhost/b2bsupplierprocesspo/process.asmx
    But somehow this URL is not accesible over there. I got following error:
    Please suggest/guide me on this.
    Thanks, Girish R. Patil.

    The error clearly states the reason for failure, being "CS0016: Could not write to output file ..... ..... - Access is denied."
    The directory in question is the "C:\Windows\Microsoft.Ner\Framework\v2.0.50727\Temporary ASP.NET Files". So two things
    Does the tutorial mention that the Web Service should be hosted under a .Net V2.0 Application Pool? If so then please give "Full Control" permissions to the above directory for the BizTalk Service Accounts (which also should be part of your "BizTalk Isolated
    Host Users" Group.
    If not then the service has to be hosted in a .Net v4.0 app pool. Change the Application Pool Settings through IIS Manager and give permissions to a similar folder (Temporary ASP.Net) but under the Framework\V4.0.... directory.
    Regards.

  • Problem while testing a BAPI Web Service

    i face this problem in web service bapi when i am carrying out the test... so can anyone help me???
    HTTP/1.1 500 Internal Server Error
    Set-Cookie: <value is hidden>
    content-type: text/xml; charset=utf-8
    content-length: 803
    sap-srt_id: 20080610/144609/v1.00_final_6.40/DD36B8E7DE44B5F19BA900145E6770F3
    server: SAP Web Application Server (1.0;700)
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Client</faultcode><faultstring xml:lang="en">Deserialisation failed</faultstring><detail><n0:SimpleTransformationFault xmlns:n0="http://www.sap.com/transformation-templates"><MainName>/1BCDWB/WSS0080610064309718000</MainName><ProgName>/1BCDWB/WSS0080610064309718000</ProgName><Line>128 </Line><Valid>X</Valid><ReferenceFault><DescriptionText>Error accessing the ref. node 'EMPLOYEENUMBER'</DescriptionText><RefName>EMPLOYEENUMBER</RefName></ReferenceFault><Caller><Class>CL_SRG_RFC_PROXY_CONTEXT</Class><Method>IF_SXML_PART~DECODE</Method><Positions>1 </Positions></Caller></n0:SimpleTransformationFault></detail></soap-env:Fault></soap-env:Body></soap-env:Envelope>

    There is SAP Note no. 830340 addressing this issue.
    https://websmp106.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=830340&_NLANG=E
    Pl try to apply that SupportPack and let us know the results after that.
    Also pl reward points as appropriate.

  • Problem in Accessing the Siebel Web Service

    Hi,
    I have a seibel web service which needs to be called from a SAP Webdynpro application. The URL is something like this.
    http://xxx.yyy.com:80/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd=Execute
    I am using Adaptive Webservice model and without hardcoding this value i should be able to send the user name and password information to the webservice.
    How i can achieve that. I am getting the error that,
    <b>returned http code 500 (Internal Server Error) with unacceptable content type (text/html;charset=UTF-8).
    <html><head><title>Message:</title></head>
    <body>The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[12:02:58]</b>
    Siebel team was asked us to send the user/password info through SOAP header.
    <b>Is there any way to set thatbusername/password info in NWDS (Basically set the SOAP Header) and if it is OK only if we can set it in the Webservices security in the Visual Administrator.</b>
    Appreciate your reply.
    Thanks and Regards,
    Sekar

    Sekar,
    I have the same problem.
    How did you change your web service as Anonymous?
    I have a user id and pwd, i tried by appending end of the service and tried with basic authentication by passing uid and pwd. No luck.
    Can you please help me how to change web service as anonymous?
    Regards,
    Sridhar

  • Problem in accessing the XI web service in Web DynPro

    Hi Experts,
            I have a wsdl file created in XI. I have followed the as per this link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7  to access the Web Service. But I end up in the following error. Can you please suggest me what are the credentials that I have to provide when creating the Logical Destinations in the Visual Admin.
    I have provided the Pipeline URL of XI server, system id and client
    Regards,
    Mathan MP

    Hi Experts,
            I have a wsdl file created in XI. I have followed the as per this link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7  to access the Web Service. But I end up in the following error. Can you please suggest me what are the credentials that I have to provide when creating the Logical Destinations in the Visual Admin.
    I have provided the Pipeline URL of XI server, system id and client
    Regards,
    Mathan MP

Maybe you are looking for

  • My itunes wont reconize that i plugged my ipod it !

    i dont know what to do , normally when i plug it in to the usb thing it attomatically opens and syncs any new songs that i had added, but now when i plug it in , nothing happend, even when i open itunes manually , it shows theres no ipod plugged in?

  • When I try to open iTunes, it asks me if I want to report my error..?

    I dont understand. I erased iTunes and Quicktime from my copmputer and then added it again..that didn't work. Then, I re-installed my CD that came with my iPod..and THAT didn't work. And then today, I opened my control panel and I opened my Quicktime

  • How do I know that a PDF files was manipulated?

    Is it possible to find out if a PDF files was manipulated? Such as if was added o deletede and so on? Thanks. Miguel

  • All photos album missing

    Hi, I am using iPhone 5 with iOS 8.0.2. Yesterday I realized that I cant view "All photos album" in Photos app. There are just the album Recently Added and other default albums. Of course i can list all albums I created, but I cannot view older pictu

  • Why no sound output?

    This will seem really dumb but I am getting no sound today, on the same project as yesterday. I am playing an Akai EWI breath controller and can see in the transport bar the 'NO IN' change each time I play a note. But the bottom 'NO OUT' stays that w