Problem while automatic creation of measuring document
Hello everyone,
my client requirement is to track the usage hours of the PRT used for maintenace order.
i have created the PRT as equipment with category P and assigned measuring point(counter) in the default values.
Then the PRT is assigned in the operation of the breakdown maintenance order,so when i tried to confirm(IW41) the operation(to which PRT is assigned) the measuring document is not created automatically.
Please let me know if ant setting needs to be done.
Thanks in advance
Santosh
Hello,
Can anyone let me know whether this is possible in PM module as i know it works in PP.
Thank you
Regards
Santosh
Similar Messages
-
Configure the automatic creation of accounting document while billing
Hi,
Could you telme where to find the customization where you configure such that
triggering of automatic creation of accounting document takes place during billing itself.
Regards
anil.Hi Anil,
In VOFA Document type in General contrlo is related to Accounting Document.If it is blank the system Automatically pics RV as accounting Document.
If posting Block is Ticked then Automatic posting will not happens.
You need to pass to Accounting in VF02 and release for accounting(Green Flag)
Regards,
Reddyy -
Backgorund job for automatic creation of billing document
Dear All
Could you advise me on how to set up a bacground job for automatic creation of billing document?
Thanks and regards,
SylwiaIn standard, you cannot generate automatic billing but you can set date and time so that you can generate invoices at the specified time in bulk. The TCode to achieve this is VF06.
thanks
G. Lakshmipathi -
Bacground job for automatic creation of billing document
Dear All
Could you advise me on how to set up a bacground job for automatic creation of billing document?
Thanks and regards,
Sylwia
Edited by: S. KOWALSKA on Jan 12, 2009 10:12 AMDear Sylwia
Please dont post the same question in multiple threads. You are receiving feedback in the other forum. Check this link
[Backgorund job for automatic creation of billing document |Backgorund job for automatic creation of billing document;
thanks
G. Lakshmipathi -
Automatic creation of billing document
Hi all,
i want to automate creation of billing document for all the deliveries for which PGI done.
i think we have to define a job which will call VF04.
my question is when we do VF04 manually, we have to give selection criteria like sales org etc and then it displays the list of all the deliveries and then we have to select the deliveries manually and press collective billing/individual billing.
so when the batch job calls the VF04, how will the batch job tells VF04 to select all deliveries and generate the invoices.
regards
sachinHi Sonu,
Go to VF04 and provide the inputs in the selection screen. Now save this as a variant.say ZZ_INV_DUELIST
After saving the variant, find the program name of the tcode VF04. This can be found by going to System----Status in the menu. The resultant screen will have the program of the tcode VF04. Lets say it is BILLDUELIST
Now go to SM36. Give some name for hte job name and click Step button
Here you have to give the program name(BILLDUELIST) and the variant name(ZZ_INV_DUELIST). Here you can also configure whether the job should run immediately or in some schedules.
Once this is done, you can create a delivery and then run this program in SM37. Now you can see the log of this program. It will tell you that the invoice is created
Hope this helps -
Automatic creation of billing documents
Hi all,
i want to automate creation of billing document for all the deliveries for which PGI done.
i think we have to define a job which will call VF04.
my question is when we do VF04 manually, we have to give selection criteria like sales org etc and then it displays the list of all the deliveries and then we have to select the deliveries and press collective billing/individual billing.
so when the batch job calls the VF04, how all the deliveries are selected and the selection criteria taken into account by the batch job,
regards
sachinhi,
thanks for the reply.
my mian question was when the batch job calls the VF04 and the slection criteria is filled using variants, then the list of deliveries is called up by VF04. my question is how will the batch job select all the deliveries for invoice creation beause whn we run the VF04 witout bathc jb ,we need to select the deliveries for billing (either collective or individual)
reards
sachin -
Automatic creation of WCD document
Dear Experts,
I am facing the below mentioned issue.
While creating WCM objects in Maintenance Order, We can create it automatically if we choose tab shown in print screen.
I am getting an option for Work Approval & Application But I am not getting an option of auto creation for WCD document.
Did I miss any config?
Thanks.Hello
Please refer the below thread publish by Bhanu .P
http://scn.sap.com/docs/DOC-46197
Br
Rakesh -
Problem while SO creation through BDC
Hi Experts,
The follow problem came in log file of SM35 ,while SO creation through BDC for some sales org.
Runtime error COMPUTE_BCD_OVERFLOW has occurred.
could you please tell me what is problem.
Thanks
jaiHi
It could be the following reasons,
1. Too many orders
2. Mismatch in the field, like fields skip a line so data not matching.
Check these
<b>Reward if it helped!</b>
Chandru -
Problems while reading and displaying .pdf-Documents from Bfile
Hi
I want to read and display .pdf-Documents in Adobe-Reader that are stored as BFile. While displaying the Document Adobe Reader is showing several Errors like " ..less Picture-Data read than expected.. ". Is this a Buffer-Problem? or whatelse ??
Thanks for help
nullPrintStream wr = new PrintStream(socket.getOutputStream());
wr.close();I suspect this is the problem. You could try socket.shutdownOutput() - or you could just leave the streams alone and let socket.close() shut things down.
Grant -
Automatic creation of clearing document
Hi experts,
We have a scenario where:
1. Co code 1 is created as vendor in Co code 2 and Co code 2 is created as customer in Co code 1.
2. Co code 1 sells to customer of co code 2, this generates AR in co code 1 and AP in co code 2
3. Co code 2 makes payment to vendor of co code 1. This clears AP open item in co code 2
We want the AR in co code 1 to be cleared automatically after step 3 i.e. we want the clearing document in co code 1 to be posted automatically.
Any suggestions how to achieve this? We thought of using IDOCs.
Thanks in advance.
- VidhyadharThe scenario is that:
1. One company code lets say 5001 has been created as vendor V5001 in co code 2012
2. and the co code 2012 has been created as customer C2012 in co code 5001
3. Co code 5001 sells to customer C2012, this generates AR in co code 5001 and AP in co code 2012
4. Co code 2012 makes payment to vendor V5001. This clears AP open item in co code 2012
We want the AR in co code 5001 to be cleared automatically after step 3 i.e. we want the clearing document in co code 5001 to be posted automatically.
Any suggestions experts?
Thanks in advance
- Vidhyadhar -
Automate creation of Pages documents from Numbers or delimited text file?
I'm just trying to find a way of automating my processes a bit.
Basically, you can assume I have information in a Number's document like this:
File Name
Headers
1-FileName
Some Title with Capitlization I Need to Keep
Subheading 1
Subheading 2
Subheading 3
2-DifferentName
Some Title with Capitlization I Need to Keep
Subheading 1
Subheading 2
Subheading 3Subheading 4
... Or in a text document like this:
1-FileName
Some Title with Capitlization I Need to Keep
Subheading 1
Subheading 2
Subheading 3
2-DifferentName
Some Title with Capitlization I Need to Keep
Subheading 1
Subheading 2
Subheading 3
Subheading 4
====
I need to turn it into separate Pages documents such that I have (in this case, 2) documents in a folder
1-FileName.pages
2-DifferentName.pages
Where each document has the title and subheading already in it and it doesn't matter how many documents I need to make.
Any suggestions, help, straight up answers?
I really appreciate any help you can provide! orzThe APIs for file conversion are only available to plugins - they are not exposed to COM APIs. You can certainly write a custom plugin to handle this and then call it from your VB app. Plugins are written in C/C++.
Leonard -
Updating Batch Number while delivery creation from sales document
Hi Experts,
I have to write code inside user exit MV50AFZZ which updates batch number during delivery creation. Suppose I have a sales having more than one line items. Each line item have different material numbers, and one material number may have more than 1 batch number. And all these batch numbers have to be updated for their corresponding material numbers. Batch number corresponds to LIPS-CHARG. So how we can maintain values for this field more than once for a particular material number?Hi Pankaj,
Were you able to update the Batch Number?
What is the function Module that you used? and where exactly did you code in the logic?
Thanks,
RV -
Problem with automatic creation of Universes on top of SAP BW - RKF
Hello
When I create Universes on top of SAP BW Querys everythings works fine, except for the Restricted Key Figures. The RKFs are created with the GUID code and not with the Description configured in the Query. I tried making the Key Figure Local and Global in the query without success. Does anyone know what's happening?
I'm using BO XI 3.1 SP2 with SAP BW 7.0.
AndréI created universes based on a BW Query in the following situations:
User specified username and password: language = PT - Dimension's name OK, RKF are GUID
User specified username and password: language = EN - Dimension's name OK, RFK are GUID
SSO: langue = PT or EN - Dimensions name are Ok and in English - RFK are GUID
I edited prefences of CMC to Portuguese. The same results.
The problem with the RKF still exists.
Is there some way resolve this problem? -
Creation of PM measuring documents after UD in calibration
Hi All,
There is a function module QFOA_QM_CHAR_TO_PM_E_POINTS (Follow-Up Action: Transfer of QM Charac. Results to PM Measuring Points) in SAP QM quality inspection configuration to create PM measuring documents automatically after the Usage decision. For that I have to create class characteristic in MIC to establish the link between MIC and the measuring point of PM equipments for automatic creation of measuring documents according to UD codes.
Can anyone please put some light how I can create the class characteristic for MIC and make a link between MIC and the measuring point of PM equipments.
Many thanks in advance.
kavita
Edited by: kavitash on Sep 15, 2010 2:59 AMHello,
Please refer this threads which will clear your doubts
[Re: Linking MIC and Batch char using class char.;
[CLASS CHARACTERISTICS LINK WITH MIC;
Regards,
Rakesh -
Automatic creation of meter reading order with RR 01 after move in
Hi Experts,
I am working with DM module of SAP ISU. Currently I am facing a problem that after move-in a periodic order with RR 01 is created automatically by the system.
Ex: Move in date is 01.01.2010. Monthly Portion is used with Schedule record 01.01.2010, 01.02.2010, 01.03.2010, 01.04.2010 and so on.
If current system date is 20.07.2010 then Meter reading order is created automatically by the system for sch MRD 01.08.2010.
Please let me know how to overcome this problem
Thanks in advance.Thanks for your reply but I have cheked SPRO setting the suggested check box is already uncheked.
I beleive the setting you have suggested is meant for default meter reading during move in but my problem is automatic creation of meter reading order with reason 01 during move in
Maybe you are looking for
-
I wondered if it was possible to create alphabet letter templates with CS2 wherein I can use the template over my wildflower photos? If this isn't possible, is there any digital photo template software available for this?
-
ORA-12054 when trying to create an MV
10gR2 I'm trying to create an MV, but is failing with the mentioned error. I've tried to search for the reason(s), but cannot seem to find it. Can somebody help? Thanks. create materialized view MV_POC build immediate refresh on commit enable query r
-
Does Client Hyper-V with Win 8.1 work on a MacBookPro 2014?
It requests "Second Level Address Translation (SLAT)" on a 64-bit architecture. The 64-bit architecture ist given, I know. But what about the SLAT?
-
Is vmware fusion version 3.1.3 compatible with OS maveric?
I´m running wmware fusion 3.1.3 with W XP in OS X (version 10.6.8) and I want to upgrade to Maverick OS without uninstalling vmware and W XP
-
Hd project - sequence issues - emergency!
I realize now the hardship I've given my computer in creating this project with Premiere. If someone could help me, that would be great because I need to finish this within the next few days! The total file size of my project is 138 GB and I'm workin