Problem while calling an RFC Function Module in Background

Hello,
I have created a RFC function module for reading data from an external DB system. The FM calls an external RFC program (coded in C++ using RFC SDK), which delivers the required data. This external program is maintainged as an TCP RFC Connection in SM59.
Further I have created a report, that calls the RFC function module to get the data from the external RFC programm.
My problem is, when I call the report in foreground, everything works OK, the RFC connection works and data can be read from the external program.
However, when I schedule the report to run in background as a job, the report is stating in the protocoll that there was a problem calling the defined RFC connection (although the connection is working properly at that time).
More funny is, this particular problem with running in background occurs only in the productive system, in test and development system the report works correctly also while running as a job in background.
Can you suggest the solution to this problem? Could it be something with authorisations or server settings?
I will be on holiday for the next 6 weeks, so take your time to answer .
Regards,
Dusan.
Edited by: Julius Bussche on Jan 22, 2009 7:19 PM
Please read the forum rules about u r g e n t ...

This is an external RFC server program, not a remote enabled ABAP RFC function module as the others seem to be assuming, right?
Is it possible that your DEV and QAS systems only have one application server, but the PROD has many and dedicated one(s) for processing low priority background jobs?
It might be that the target server of your TCP connection is not this BTC instance, and your RFC server is returning the data "locally" - so, into nirvana...
Just guessing, but might be worth checking.
Cheers,
Julius

Similar Messages

Calling Synchronous RFC Function Module in Background

Hi all,
Currently we are working on some requirement where in we have to retrieve data from one system(CRM) and update the same into another system(ECC). We have developed a RFC Function in CRM system and it is being called from ECC system as in synchronous mode via a batch program.
Now since all sychronous call to a RFC function will be dialog there is a constraint on the runtime which is being set by maximum run time for each dialog work process. So my question is there an option to call an RFC function synchronously in background (background task) so there is no runtime performance.
The standard TRFC, QRFC calls in background runs asynchronously and so I am trying to check with the SDN world as whether has anyone tried SRFC(Synchronous) call in background?
Thanks in advance,
Jagath

So my question is there an option to call an RFC function synchronously in background (background task) so there is no runtime performance.
One solution would be to increase the value of the "time out" parameter defined the CRM system. This i feel is not a fool-proof solution as the run-times cannot be predicted. Check this thread: Re: RFC timeout profile parameter
For me a better solution would be to implement tRFC call instead of a synchronous call. Any reasons why you don't want to implement a tRFC ?
BR,
Suhas
Edited by: Suhas Saha on Jun 26, 2010 8:52 AM

Calling a RFC Function Module

Hello Guys,
I have a question regarding calling a RFC function module.
In BW - BI 7.0 I call a RFC function module:
(The ABAP program in BW-BI 7.0 is below)
CALL FUNCTION ''ZTESTFUNCTIONMODULE' " Function module in ECC
     DESTINATION 'DECCLNT110' " ECC system
    TABLES
      it_gl_item   = it_gl
      it_errlog_gl = it_errlog_gl.
The 'ZTESTFUNCTIONMODULE'   is RFC enabled in the ECC system.
The purpose is we retarct the data from BW to ECC.
When I run the function module it always asks for the user id and password.
The SAP logon screen appears and it asks for the user id and password.
The destination is maintained in the SM59 transaction and also the user is maintained there. I think it should login automatically into remote system and return the tables. is it correct. How to skip the logon screen.
Do I have to pass the user id and password in the function module. I think it should take the user id from the SM59 destination. Is it correct.
Please advise. As always thanks for your help guys.

Hi Senthil,
I think you answered your query in your question itself
The user ID and password need to be maintained in RFC destination in SM59.
Go to SM59 and then click on test connection..if it does not ask for ID and passwoed that means correct ID and password is maintained in SM59 otherwise maintain it.
Regards,
Atish

Where should i call the rfc function module? in xi or in r/3

where should i call the rfc function module?
for the synch scenario: file < -- > xi <---> rfc
i know the type of rfc is tcp/ip; but i'm not sure with the followings,
and with some trials i can not even see any message via rwb even all the setting
can be activated without errors.
where should i create the rfc destination? in r/3 or xi
where should i call the rfc via abap program? in r/3 or xi
i guess the calling program should belong to the different server with the rfc itself....
so confused....
Thanks for your reply!!
Jun

if i create the destination in xi point to r/3, then i call the rfc use the destination in r/3 right ?
The call doesnt use the destination in R3. XI has the RFC destination which is just used to connect to the R3 system
but where i need to create the fm via se37? in xi or r/3 ?
In R3
Regards,
Prateek

Unknown error calling a RFC Function Module in BODI

Hi all,
I am having an issue identifying the error that my batch job in BODI is giving with regards to a RFC function module call in my query. The value returned by the standard parameter 'AL_RFC_RETCODE' are square characters ( ).
At the completion of the job, the error message 'RFC CallReceive error <Function ZCT_INDSLS_SLS_TRN_INSERT: Invalid request.. Invalid request.>.' is being output.
Correct me if I'm wrong but the parameter 'AL_RFC_RETCODE' should return standard values as per the techical manual provided to undertand any errors that might occur during a RFC FM call.
Can anyone help me on this?
Best regards,
Andrew Wong

Hi Senthil,
I think you answered your query in your question itself
The user ID and password need to be maintained in RFC destination in SM59.
Go to SM59 and then click on test connection..if it does not ask for ID and passwoed that means correct ID and password is maintained in SM59 otherwise maintain it.
Regards,
Atish

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Calling BAPI(RFC function module) in java? Part 2

Hi
Can any body tell me or give me source code for calling give BAPI...i need to give the inputs to that parameters..
data l_order_header_in    like bapisdhd1.
data t_return             like bapiret2 occurs 0 with header line.
data t_order_items_in     like bapisditm occurs 0 with header line.
data t_order_schedules_in like bapischdl occurs 0 with header line.
data t_order_partners     like bapiparnr occurs 0 with header line.
*data t_order_condition_ex like bapicond   occurs 0 with header line.
*clear   t_order_condition_ex.
*refresh t_order_condition_ex.
clear l_order_header_in.
l_order_header_in-doc_type      = 'TA'.
l_order_header_in-sales_org     = 'ZZ02'.
l_order_header_in-distr_chan    = 'Z2'.
l_order_header_in-division      = 'Z2'.
*l_order_header_in-purch_no      = '12'.
clear   t_order_items_in.
refresh t_order_items_in.
t_order_items_in-itm_number     = '000001'.
t_order_items_in-material       = 'HAMAM'.                 " 'LBYA1'.
t_order_items_in-target_qty     = '0000000000001'.
t_order_items_in-comp_quant     = '0000000000001'.
append t_order_items_in.
clear   t_order_partners.
refresh t_order_partners.
t_order_partners-partn_role     = 'AG'.
t_order_partners-partn_numb     = '0000000006'.
append t_order_partners.
clear   t_order_schedules_in.
refresh t_order_schedules_in.
t_order_schedules_in-itm_number = '000001'.
t_order_schedules_in-sched_line = '0001'.
t_order_schedules_in-req_qty    = 1.
append t_order_schedules_in.
clear   t_order_partners.
t_order_partners-partn_role     = 'WE'.
t_order_partners-partn_numb     = '0000000006'.
append t_order_partners.
break kumars.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
SALESDOCUMENTIN               =
    order_header_in               = l_order_header_in
ORDER_HEADER_INX              =
SENDER                        =
BINARY_RELATIONSHIPTYPE       =
INT_NUMBER_ASSIGNMENT         =
BEHAVE_WHEN_ERROR             =
LOGIC_SWITCH                  =
TESTRUN                       =
CONVERT                       = ' '
IMPORTING
SALESDOCUMENT                 =
tables
    return                        = t_return
    order_items_in                = t_order_items_in
ORDER_ITEMS_INX               =
    order_partners                = t_order_partners
    order_schedules_in            = t_order_schedules_in
ORDER_SCHEDULES_INX           =
ORDER_CONDITIONS_IN           =
ORDER_CONDITIONS_INX          =
ORDER_CFGS_REF                =
ORDER_CFGS_INST               =
ORDER_CFGS_PART_OF            =
ORDER_CFGS_VALUE              =
ORDER_CFGS_BLOB               =
ORDER_CFGS_VK                 =
ORDER_CFGS_REFINST            =
ORDER_CCARD                   =
ORDER_TEXT                    =
ORDER_KEYS                    =
EXTENSIONIN                   =
PARTNERADDRESSES              =
break venkat.
call function 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT          =
IMPORTING
RETURN        =
Awaiting for ur responses..
Thx
PRadeep

To call an RFC, you need to import that first. For that right click on the project into which you need to add the rfc.
Import >>import RFC modules from r/3>>Give the package name and a port name for the rfc.
set the server options as your r/3 server properties.
Then you can search the Function name >> it will be displayed in the result area>> select it and press finish.
The RFC will be imported to your project.
Then you need to create JCO for calling that rfc.
Here is a sample code which calls an RFC and setting jco..
import com.sap.mw.jco.JCO;
import com.sapportals.portal.prt.component.*;
public class rfc extends AbstractPortalComponent
     private JCO.Client jcoClient;
     Insert_pgm_PortType insFunc=new Insert_pgm_PortType();
     Zinsert_Pgm_Input ip=new Zinsert_Pgm_Input();
     Zinsert_Pgm_Output op=new Zinsert_Pgm_Output();
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
    this.connect();
     insFunc.messageSpecifier.setJcoClient(jcoClient);
//setting input params
     ip.setAssociate_Id1("44");
     ip.setCourse_Objt1(2);
     ip.setQlty_Content1(5);
     ip.setSeq_Content1(2);
     ip.setTraining_Id1("22");
//calling RFC
     try{
     op=insFunc.zinsert_Pgm(ip);
     }catch(Exception e){}
          response.write(op.getMessage());
          this.disconnect();
//creating JCO connection
     private void connect() {
               try {
                    jcoClient =
                         JCO.createClient("Client","userid","password","Language","servername","Systemid");
                         jcoClient.connect();
               } catch (Exception e) {
                    System.out.println("Error connecting to SAP ::" + e.getMessage());
                    e.printStackTrace();
     private void disconnect() {
               try {
                    jcoClient.disconnect();
               } catch (Exception e) {
                    System.out.println(
                         "Error dis-connecting to SAP ::" + e.getMessage());
                    e.printStackTrace();
Hope this Helps
gEorgE

Regarding: calling a rfc function module for web dynpro for JAVA

Hello all,
I want to call an rfc enabled function module from webdynrpo application.
*and there is one condition that function module should be called not threw bapi.*
Thanks
Edited by: Punit Pawar on Jul 21, 2008 10:38 AM

Hi
You can call RFC(remote enabled) from R/3 through Models in Webdynpro Java.You need to have JCO destinations.You connection properties of backend System
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0310cf8-8cdb-2910-4a82-df1f11619f4e
Thanks,
Tulasi Palnati

RFC function module called inside an enhancment section

Hi All,
I am calling a RFC function module in background task as a separate unit. I am calling this FM within an enhancement section. Is it alright to use a commit work inside this RFC enabled FM even if I am calling it within an enhancemnt? Please help

Hi,
Yes, you can use a commit work inside this RFC enabled FM even if I am calling it within an enhancemnt. Please refer below link regaring this. Thanking you.
Commit within an enhancement point

Facing Problem with RFC Function Module

Hi,
I have created an RFC function module to get some data in table format.
I have run the RFC in original system: It is giving the data.
However, when I run this in target system, It is not giving any values.
Could you please let me know, why it happens? I am not sure where I missed out.
Thanks,
Sandeep

HI,
i hope you are calling the RFC function module in the target system like this
CALL FUNCTION <FUNC NAME> DESTINATION <DESTINATION NAME> . The destination should be logical system name of the source Logical system .
Regards,
Nagaraj

Backgroung job failing becuase RFC function module is running in Dialog

Hi,
I have a program which is calling a RFC function module. I am running this program in background as a job. Now this function module which is in other system is running in Dialog and giving a time out error and the job is failing becuase of that.
I tried call fucntion 'test' in background task
destination 'XVZ'
tables
test = 'test'.
But this is not working, i can still see this function module running in Dialog in SM50. Any suggestion?
Thanks,
Shweta

Hi !
RFC-Called function-modules are running in a dialog workprocess of the
target system (they could not run in a batch proecess !!).
That means the do have the same "Timeout" limitations than any other
Dialog-Process.
What you can do:
- The Dialog "Timeout" could ce increased by your SAP-BASIS
- If they could not - you should "shorten" the LUWs in the target-funktion.
...means - put a COMMIT WORK an any point the work is done.
After a COMMIT WORK the "Timeout" Counter beginns at 0 !
Hope that helped....
Reward points would be nice...

Jco Call a Function Module in BackGround

Hello All.
Some one can send me a simple exemplo how to call a ABAP Function Module in BackGround.
Can i set this in Java side?
..or only set the BackGround Work Process in SAP side?
In my java application call the Abap Function Module like this:
client.execute(function);
How to set parameters to execute the function in BackGround.
My rpoblem is when the return the data to java side ...occurs the error TIME_OUT in Dialog WorkProcess.
I need to call in background to better performance and to prevent the TIME_OUT.
Best regards.
Taylor.

Hi.
I dont know how to do, but, you can do a previous RFC, this new RFC execute the original function in background mode. I did something like that:
- JAVA: client.execute("RFC_FUNCTION", input, output);
- SAP: RFC_FUNCTION:
CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
or
CALL FUNCTION update_function IN UPDATE TASK
                             [EXPORTING p1 = a1 p2 = a2 ...]
                             [TABLES t1 = itab1 t2 = itab2 ...].
I hope that help you

Exception error_message in rfc function module

Hi all,
I am getting a short dump Raise exception in my R/3 system when calling a RFC function module in R/3 for printing a label in LOFTWARE. The error analysis shows the that exception condition 'Nlink exception' condition raised . The rfc destination is working fine and also i have included the predefined exceptions system_failure and communication_failure and also I have used RFC_PING function module before calling teh rfc for printing . Yet it is giving short dump.
I heard that if we include one more exception error_message with return code 99
ie exceptions
    system_failure = 1
    communictaion_failure = 2
    error_message = 99. there will be no short dump.
Can anyone explain me why the return code for exception error_message is not 3 but 99 and also what is the significance of this.
Need your help.

from dump no information is available also it last occured 5 days ago so refreshed from our system..
I want to know what is the importance of the return code 99 here...
can anyone clarify this concept and aslo genrally in rfc exception handling communication_failure and system_failure can handle all type of exceptions then why error_message exception is added with a return code of 99..

Debuggin a Call to Remote Function Module

Hi
I have a scenario where i have a Remote Function Module in r3 which is being called synchronously by an external java application. The FM has a lot of input and output parameters and many tables. The output returned by the FM is not as expected.
Can anyone tell me how debug a Remote Function Module when a call has been made from an external application.
I am not able to get the test data sent by the external application . So when the external application gives a call to this Remote FM and if it is possibele to debug it would be great.
regards
Nilesh Taunk.

Hi Nilesh,
1) Login to SAP with the same ID with which you will calling the RFC function module from the outside system.
2) Goto transaction - se37/se38
3) Goto Utilities => Settings.
4) Select the ABAP Editor Tab.
5) Click on the Debugging tab.
6) Tick the Actv. button and give the user name with which you will be debugging the code. In this case the logged in user id.
7) Press Enter.
8) Now put an external break point inside the Function Module.
9) Load your external application (from where you want to debug the FM) once again.
The execution will stop in the FM.
Hope it helps..
Lokesh
PS: This was a simple question, but I guess the reason no one has answered your question is due to the fact that you havent rewarded points to members helping you. Also remember to close your post once it has been answered.

Debugging the Functional Module in Background.

I am calling a Custom Functional module in Background mode using the syntax CALL FUNCTION ZFM in background task.
Can anyone tell how to debug the code using this..
Thanks ,
Yatish

Hello Yatish
You could try to use the following trick:
(1) Put an endless loop into the coding of your function module where you want to start debugging, e.g.
DATA:
 lx_exit_loop(1) TYPE c.
lx_exit_loop = ' '.
DO.
 IF ( lx_exit_loop = 'X' ).
 EXIT.
 ENDIF.
ENDDO.
(2) Call your function module in background task
(3) Call transaction SM50 and search for the background process.
(3) Choose from menu Program/Mode -> Program -> Debugging
Now you the debugger should bring you right to your endless loop. Set lx_loop_exit = 'X' in the debugger and continue (F5 or F6).
Regards
Uwe

Problem while calling an RFC Function Module in Background

Similar Messages

Maybe you are looking for