Problem while creating PO (Cost center error)

Dear Expert,
While Raising PO through ME21N, we are getting an error for cost center budget exceeded for 2011.
The below is the error.
Budget for Cost Center 2110404 getting exceeded for year 2011. Please check
Message no. ZCO_VALIDATIONS004
The cost center is newly created in the fiscal year 2011 & the budget is assigned at internal order level & not on cost center level.
I want to know were the system is checking for the budget in cost center (T code).
I have checked the Tcode KPZ2, KPZ3, KP06, there is no budget assigned.
Thanks & Regards,
FICO Consultant

Hi,
I have checked the Co Validation in Tcode OKC7 & found the below validation set for specific  Cost center i.e Marketing cost center which i m using.
Cost Center IN
FIVAL_MARKETINGCC ( Marketing cost centers for Validations ) AND NOT
Activity type LIKE 'HR' AND NOT Activity type LIKE 'TR'
AND NOT Activity type LIKE 'AZ' AND NOT*
Ref. Transactn LIKE 'TR' AND NOT*
Ref. Transactn LIKE 'HR' AND NOT Ref. Transactn LIKE 'A'
AND Amount in LC <> '0.00'
Please let me know if you can give any inputs on the same to resolve my issue.
Thanks & Regards,
Dhaval

Similar Messages

  • How to creat a cost center

    While creating a cost center it is throwing a error that Controlling area XXXX does not have a standard hierarchy (please assign one)..
    Pls Guide what i need to do..
    Its urgent..
    Thnx & regards
    Subhajeet

    If you assigned the Std Hierarchy to the Controlling Area while the CCtr Create screen was still open, get out of that screen and try to create the CCtr again.
    Else, go to OKEON and maintain a hierarchy for the Controlling Area. Create a group or two below the Std Hierarchy and then try to create the CCtr.
    Cheers.

  • Cost Center Error while releasing Billing document to Accounting

    Hi SAP Gurus,
    Our user raised an issue that when he had released billing document to accounting, the system threw error message
    "Cost center xxxx (CO area)/xxxx(Cost center) does not exist on date 11/16/2011". Message No. KI 222.
    But the cost center xxxx does not exist in the system at all. The user does not want to create the cost center eirther. Cost center was not entered in Sales order, Delivery and Billing. I have checked 'Default account assignement' (OKB9) settings, Default account assignment in cost element master record and assignment of cost center to sales organization (OVF3). But cost center xxxx was not configured in the above settings. I have checked validations/substitutions, user exits and BAPIs, there is nothing specific to the cost center. This is not a cross-company code scenario. I have made field status to optional for cost center. But still the problem persists. Accounting document did not get generated because of the above mentioned error message. User applied SAP notes 315350. But it did not resolve the issue.
    Would anyone let me know 'why the system showed the cost center xxxx that does not exist, while releasing the billing document to accounting'?
    Thanks in advance.
    Best Regards,
    K.S.K

    Hi Friend,
    I think this link help for you
    Cost center XXXX does not exist on 15.09.2010.
    or check the OVF3

  • Error while creating Product Cost Collector

    Hi SAP Gurus,
    While creating Product Cost Collector I am getting the following Error:
    Enter a distribution rule for Order without a validity limit
    Message no. KD059
    Diagnosis
    The settlement profile used requires you to define a distribution rule for Order. For period 009 2008, however, you have not created a distribution rule for Order.
    Procedure
    Create a distribution rule for Order without a validity limit, because, if the distribution rule does have a validity limit, the system always issues this message in the period following the last valid period.
    You can also use a different settlement profile that does not require such a distribution rule, or change the settlement rule used.
    Can any one help where exactly i need to maintain this.
    The settlement profile settings are fine.
    I am getting this error only after i have changed the scenario to Reproting point back flushing

    Dear Suryanarayana
    Please check the corresponding settlement profile for product orders.
    In most of the cases message KD059 means that no distribution rule is assigned to your production order.
    This is not an error, but the system design. In order to avoid message KD059 you will either have to enter settlements parameters and a distribution, or change settlement profile for valid receivers in transaction OKO7 from 'settlement required' to 'Can be settled'.
    I hope this helps resolve the issue for you. I wish you the best in your endeavours.
    Kind Regards,
    Brendan

  • Error in account determination while creating shipment cost document in SD

    Dear all,
    I have come across a case where an error has come in determining account while creating shipment cost document. This is happening only in the case of a particular shipment cost type. The Status of " Calculated" is C, the status of " Assigned" is " B" and the status of "Transferred" is A.
    Can any one throw any light as to why it is happening like this?
    Thanks and best regards
    Kumaran

    Dear all,
    With the help provided, I am unable to resolve the issue.
    Any further inputs please?
    Thanks & best regards
    Kumaran

  • Problem while Creating Service order through Work Order

    Hi Gurus,
    I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
    So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n)  which automatically should be picked from the work order refference.
    But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
    Can anyone explain me this?
    Is this something that one can explain?
    Regards,
    Murugesh R
    Rewards for value replies.

    Closed..

  • Problem while creating Service order

    Hi Gurus,
    I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
    So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
    But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
    Can anyone explain me this?
    Is this something that one can explain?
    Regards,
    Murugesh R
    Rewards for value replies.

    Hi Murgesh,
    If GL code is not getting bydefault from the system it is needed to be provided by the user.
    If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
    it is avalible in deafult settings in order node
    If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
    But if your PO is not w.r.t. PM orders PR then needs to be given manully.
    Ramesh
    Edited by: RameshChandra  Soni on Jul 25, 2008 8:16 AM

  • Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

    Hi All,
    I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    SQL>
    SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
    Table created.
    SQL> create materialized view log on t;
    Materialized view log created.
    SQL> create public synonym syn_t for t;
    Synonym created.
    SQL> CREATE MATERIALIZED VIEW MV_t
      2  REFRESH ON DEMAND
      3  WITH PRIMARY KEY
      4  AS
      5  SELECT name,id
      6  FROM syn_t;
    Materialized view created.
    SQL> CREATE MATERIALIZED VIEW LOG ON  MV_t
      2  WITH PRIMARY KEY
      3   (name)
      4    INCLUDING NEW VALUES;
    Materialized view log created.
    SQL> select * from v$version;
    BANNER
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    PL/SQL Release 9.2.0.6.0 - Production
    CORE    9.2.0.6.0       Production
    TNS for Solaris: Version 9.2.0.6.0 - Production
    NLSRTL Version 9.2.0.6.0 - Production
    SQL>
    SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
    Table created.
    SQL> create materialized view log on t;
    Materialized view log created.
    SQL> create public synonym syn_t for t;
    Synonym created.
    SQL> CREATE MATERIALIZED VIEW MV_t
    REFRESH ON DEMAND
    WITH PRIMARY KEY
    AS
      2    3    4    5  SELECT name,id
    FROM syn_t;   6
    Materialized view created.
    SQL> CREATE MATERIALIZED VIEW LOG ON  MV_t
    WITH PRIMARY KEY
    (name)
      INCLUDING NEW VALUES;  2    3    4
    CREATE MATERIALIZED VIEW LOG ON  MV_t
    ERROR at line 1:
    ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
    Message was edited by:
    Avinash Tripathi
    null

    Hi Nicloei,
    Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
    Regards
    Avinash

  • Problem while creating JCA connection to MDM server

    Hi All,
    I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
    http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
    but I am getting following exception in this page
    Polling Repository
        name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
            Enrichment Request Threads
    Could somebody help me pointing if something I have missed..
    Thanks and Regards,
    Manoj

    hi Swarna,
    I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
    The detailed exception is
    Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
    SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
    com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
         at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
         at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
         at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
         at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
         at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
         at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
         at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
         at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
         at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
         at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
    Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
         at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
         at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
         ... 9 more
    Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
         at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
         at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
         ... 10 more
    Regards,
    Manoj
    Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM

  • Problem while creating data transfer process

    Hi friends
    I am using BI 7.0 version.
    I m getting a problem while creating dtp
    After activating DTP and selecting the execute button, I am getting the following error message:
    Request cannot be processed in its current state
    Messg no : RSBK209
    can anyone help me on this problem
    Thank

    Hi Deepthi,
    Also check the error message(long text) and paste it here...
    check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
    Hope this helps
    Thanks
    Kalyan

  • Problem while creating CAF project in NWDS workspace

    Hi Experts,
    We are facing a problem while creating CAF project in NWDS workspace. Even though we have tried in new workspace we are facing the issue. Find the below build error.
    We are not getting any error when we build from CBS.
    [javac] ERROR: C:\sap\test_VC_DC.jdi\0\DCs\test.com\ja\bl\journal\ejbmodule\_comp\src\com\test\ja\bl\journal\modeled\ModifyJournalLineItemRequestMessage.java:7: cannot find symbol
    [javac] ERROR: symbol  : class JournalLineItemDetail1
    [javac] ERROR: location: package com.test.ja.cm.util.modeled
    [javac] ERROR: import com.test.ja.cm.util.modeled.JournalLineItemDetail1;
    when we expand com.test.ja.cm.util.modeled there is no file with name JournalLineItemDetail1 and the actual file exists is JournalLineItemDetail but we are not able to understand why 1 is appending to the file JournalLineItemDetail. Can somebody throw some light on this?
    Regards,
    Pradeep

    Have you checked out the topics at the right in the More Like This section?
    OT

  • Problems while creating Web Services in development server

    Hello,
    We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
    Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
    We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
    Regards,
    Rachel
    Edited by: Rachel on Feb 3, 2009 9:15 AM

    Hi,
    With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
    *steps followed *
    Step 1 : Entered Service Registry Parameters in WSPARAM .
    Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
    Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
    We have followed steps in se80.Don't know how to proceed further.
    We are unable to find the service in soamanger .How to find the service name in soamanager?
    Regards,
    Rachel
    Edited by: Rachel on Feb 3, 2009 12:38 PM
    Edited by: Rachel on Feb 3, 2009 12:48 PM

  • Problem while creating script form - lang EN is not available in client 800

    Hi friends,
    I getting a problem while creating a script form in SE71.
    if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
    But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
    What could be the problem and how to solve it friends . Please help me.
    Thanks
    -Hima

    Hi There,,
    By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
    If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
    go head and create the Zform, don't forget to activate the form, before calling in the driver program.
    In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
    Thanks-
    Rahul

  • Problem:  While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off.  Video soundtrack is not in the right place.  HELP!

    Problem:  While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off.  Video soundtrack is not in the right place.  HELP!

    Have you checked out the topics at the right in the More Like This section?
    OT

  • Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

    Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
    1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
    2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
    Appreciate for any help rendered.

    Mikko777 wrote:So what is the best?
    I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
    What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
    Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
    Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
    Mikko777 wrote:PS:You produce a lot of text and welcome smile
    Yeah. Wonder why I'm still employed? So do I ...

Maybe you are looking for