Problem while creation custom Infotype for HRP (Organization mgmt)

Hiii...
Newbie to HR-ABAP...
I have successfully created a custom infotype for HRP (Organization mgmt)....how can i see the infotype in t-code PP01.
Thanks
A

Hi
Perhaps MM11/12 can't update your custom field because you have use a data element where the flag Document change isn't setted.
Max

Similar Messages

Problem while postings a MIRO for partial deliveries.

Hi,
We ar facing a problem
while posting a Miro for the Planned delivery costs for the import orders.
when we receive an item in partial consignment of the same order.
The system will allow for the first time to post the deliver cost, after this the MIGO and MIRO will be done and cycle will be completed.
For the second remaining consignment, the system is not allowing to post the Miro itself for the delivery costs.
IT is giving an error message."Quantity invoiced greater than goods receipt quantity."
We have disable GR based IV in PO
Provide me the solution.
Sunil

hi,
i hope you have done the following steps
1) for import do MIRO first for the custom duties ( CVD, Edu Cess, S& H Cess on CVD) by selecting planned delivery cost.
2) J1IEX ( capture) referencing material document number of MIRO.
3) MIGO of the qty received.
4) J1IEX ( post).
follow the same steps for the next consignment.
what I see is that you have mentioned the full qty against the value in MIRO.
say ur PO qty is 10 and your partial shipment is of qty 5.
then in first MIRO entry enter qty as 5 not 10.
pl check your material documents of MIRO and MIGO and see what qty you have entered.
Thanks and regard
Rajesh

Auto picking Excise values while booking customs invoice for Import.

Hi All..
I want to have the excise values(...BED,CVD,CESS,HCESS,SAD...), to be picked up in my MIRO screen while booking customs invoice for my imports.
These excise values have to be captured based on my PO excise values.As my PO has number of lineitems,its tough to enter the excise values manually one by one while booking my customs invoice (before migo...).
Could you pls share your experience and valuable ideas to capture this automatically.
Thanks in advance
R.Kannan..

First of all, as we do MIRO before MIGO in case of imports, the duties cannot be defaulted as per standard SAP. another problem you will face in applying any exits/enhancements is that Your PO will be in foreign currency , you will do MIRO in INR, at time of MIRO , what exchange rate do you expect system to pick up? because customs have their own exchange rate for the month which is different from the exchange rate mantained as per Forex .

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

Custom Infotype for eRecruiting

Dear Experts,
We need to create a custom infotype for eRecruiting.Need some pointers to the same.
PM01 is used for PA infotypes
PPCI for OM & PD.
How should we create custom infotype for eRecruiting which starts from 5102 onwards?
Please help asap.
Regards,
Sowmya

Hi,
Thanks a lot Divya.
We indeed created the infotype using PPCI.
For checking purpose we assigned it to a OM object & using Transaction PP01 entered a few records just to check if it is working.
But the real test would be if we can successfully bind it to the webdynpro ABAP screen.
Regards,
Sowmya

Error imparting while creating Customized infotypes

Dear Expert,
I am working on customized infotype for the PA module.
i am creating through PM01, i have update the fields and save, check and activate the structure then i go back to PM01 main screen the following warning massage imparting. for reference following screen shot
But still i go back and click on technical attribute button for the maintain the details. the new warning massage
Please help me out how to resolved this issue, i am unable to do the customized infotypes.
Thanks
Urvashi

Hi Urvashi,
The field names of your infotypes better have to start with ZZ* like ZZWRITE or ZZREAD. This would avoid 2 warnings.
The other 2 warnings are caused because you didn't set an enhancement category for your structure PS9002.
If you're creating a new infotype, please use the button "generate objects" in place of edit.
Afterwards, you could go to each step with the edit button.
Best regards,
Jonathan

Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers of the appropriate version can be accessed from the Internet

Good Morning,
We are getting this error
Outlook Web Access is currently unavailable. If the problem continues, contact technical support for your organization and tell them the following: No Client Access servers
of the appropriate version can be accessed from the Internet
We installed a new Exchange 2007 CAS on Windows 2008R2. Got rid of old CAS on Exchange 2007. Now seeing this error. Does anyone have an idea??

Hi,
If the issue persists, I recommend you install Exchange 2007 SP3 RU7 and check the result. Also, ensure that Exchange 2010 SP2 RU1 or later version is installed. Old Exchange version may lead to the CAS-to-CAS proxy incompatibility.
What's more, here are some helpful blogs for your reference.
Exchange 2010 SP2 RU1 and CAS-to-CAS Proxy Incompatibility
http://blogs.technet.com/b/exchange/archive/2012/02/17/exchange-2010-sp2-ru1-and-cas-to-cas-proxy-incompatibility.aspx
OWA Coexistence With Legacy Versions
http://blogs.technet.com/b/sjimmie/archive/2010/07/09/owa-coexistence-with-legacy-versions.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Problem in creation of infotype

Hi,
When i will try to create a custom infotype and am trying to save it ,it gives the following error "Package in non-original system only modifiable with Organizer Tools" and a default package came in the initial screen of PM01.So i cant understand it please help me to saolve this issue.
Waiting for ur reply.....
Thanks,
Ali

Ali,
Please check the package which you are saving. per my understanding, this is routed to non original system.
Use the valid package which is attached and routed to QAT and PRD box path, then it will resolve your issue.
Regards,
Raj

Bins problem while creating goods receipt for production order.

Hi All,
          I am facing a problem with selection of bins while creating goods receipt for production order in transaction MB31 and MBBE.
The order of filling bins is with respect to storage Unit not by document no, Please suggest something.
The scene is like that.
The bins are not filled in the proper sequence, the system checks for the empty bins and filled those later on.
like this,.
Typ StorageBin SC SS    Stock Avail.st BUn GR Date    DocumentNo Storage Unit         Time
SLoc Batch      Re IA PutawayS Pick qty Cert. No.
VN1 106A088                 0        0 CS 01/25/2010    4739297 1005721391           10:00:59
100 0001020069            60        0
VN1 107B076                 0        0 CS 01/25/2010    4739298 1005721392           10:01:01
100 0001020069            60        0
VN1 108B076                 0        0 CS 01/25/2010    4739299 1005721393           10:01:04
100 0001020069            60        0
VN1 109A077                 0        0 CS 01/25/2010    4739300 1005721394           10:01:06
100 0001020069            60        0
VN1 110B079                 0        0 CS 01/25/2010    4739301 1005721395           10:01:08
100 0001020069            60        0
VN1 106B088                 0        0 CS 01/25/2010    4739302 1005721403           10:01:11
100 0001020069            60        0
VN1 123B158                 0        0 CS 01/25/2010    4739303 1005721389           10:01:13
100 0001020069            60        0
VN1 124A160                 0        0 CS 01/25/2010    4739304 1005721390           10:01:15
100 0001020069            60        0
VN1 118A133                 0        0 CS 01/25/2010    4739305 1005721396           10:01:17
100 0001020069            60        0
VN1 119A128                 0        0 CS 01/25/2010    4739306 1005721397           10:01:20
100 0001020069            60        0
VN1 120B162                 0        0 CS 01/25/2010    4739307 1005721398           10:01:22
100 0001020069            60        0
VN1 121B159                 0        0 CS 01/25/2010    4739308 1005721399           10:01:24
100 0001020069            60        0
VN1 122B159                 0        0 CS 01/25/2010    4739309 1005721400           10:01:26
100 0001020069            60        0
VN1 123B159                 0        0 CS 01/25/2010    4739310 1005721401           10:01:29
100 0001020069            60        0
VN1 124B160                 0        0 CS 01/25/2010    4739311 1005721402           10:01:31
100 0001020069            60        0
Thnks you,
Anmol.
Edited by: anmol112 on Jan 25, 2010 10:34 PM

no replay, clossing threat.

Problems while defining EJB relations for container managed bean

I am having a problem while trying to create my relations for my container managed bean.
My Database schema is:
Order table
order_id
message
WorkItem table:
order_id
item_id
message
I have defined my OrderBean to have:
@LocalMethod()
@CmrField
public abstract Collection getCmWorkItemsCmr();
@LocalMethod()
public abstract void setCmWorkItemsCmr(Collection workItems);
I am not sure how to define my relation for my class:
@Relation(cmrField = "cmWorkItemsCmr", multiplicity = Relation.Multiplicity.MANY, name = "Orders-CmWorkItems")
An order can have many workitems. I am not sure how to fill in the rest for foreign Key jointable and such.
Any help pointing me in the right direction would be helpful.
Thanks,
Ian

I am having a problem while trying to create my relations for my container managed bean.
My Database schema is:
Order table
order_id
message
WorkItem table:
order_id
item_id
message
I have defined my OrderBean to have:
@LocalMethod()
@CmrField
public abstract Collection getCmWorkItemsCmr();
@LocalMethod()
public abstract void setCmWorkItemsCmr(Collection workItems);
I am not sure how to define my relation for my class:
@Relation(cmrField = "cmWorkItemsCmr", multiplicity = Relation.Multiplicity.MANY, name = "Orders-CmWorkItems")
An order can have many workitems. I am not sure how to fill in the rest for foreign Key jointable and such.
Any help pointing me in the right direction would be helpful.
Thanks,
Ian

Customs Declaration for Export- Organization View not showwing legal unit

Hi All,
System has generated customs document for invoice, I have open it in change mode and going to Organization tab(view)
Document type CULOEX
Foreign Trade Org xxxxx
Legal unit - no legal unit
showing blank
actually system has to pick legal unit automatically but not coming.
When i am trying to give (assign) manually legal unit and licence number , system is not taking legal unit when i am giving manually it is going out.
If i go directly other tabs(views) document is complete. no errors.
Please let me know where did wrong
Thanks
Tarun

hi,
check if you have assigned a partner function of
the partner function type 'Legal Unit' to the partner grouping that
is assigned to the document type you use for the process.
Balazs

Custom Infotype for Org Management

Hi Experts,
I Iam trying to create custom infotype to capture some infomation on an Org Management custom object and I am not sure if I can do this through PM01 because this is neither employee or applicant info but custom object info. Any idea on how to do this?

Hi,
For creating OM custom infotype you should start with transaction SE11. PM01 is only for employee and applicant IT.
Go to SE11Create structure Ex:HRI9009 Create all necessary datatypes. (fields for your IT).
Then go to PPCI enter IT name and number. then maintain Table T77I here maintain time constraint for your IT.
If you still have doubts get back to me.
Thanks and Regards,
Shilpa

Custom infotype for submodule 'RE'

I am new to SAP HR module . i have created a custom infotype through PM01 for sub module RE. but when iam going to create master data for this custom infotype using PB30 , system creates dump with following error message " Access via 'NULL' object reference not possible."
Thanks
Sarath

Hi,
Thanks a lot Divya.
We indeed created the infotype using PPCI.
For checking purpose we assigned it to a OM object & using Transaction PP01 entered a few records just to check if it is working.
But the real test would be if we can successfully bind it to the webdynpro ABAP screen.
Regards,
Sowmya

Customs Declaration for Export- Organization View

Hi All,
System has generated customs document for invoice, I have open it in change mode and going to Organization tab(view)
Document type CULOEX
Foreign Trade Org xxxxx
Legal unit -
showing blank
actually system has to pick legal unit automatically but not coming.
When i am trying to give manually legal unit and licence number , system is not taking legal unit when i am giving manually it is going out.
If i go directly other tabs(views) document is complete. no errors.
Please let me know where did wrong
Thanks
Tarun

hi,
check if you have assigned a partner function of
the partner function type 'Legal Unit' to the partner grouping that
is assigned to the document type you use for the process.
Balazs

Problem in Creation of implementaton for Badi FAGL_DERIVE_SEGMENT

Hello Abapers,
I am facing problem when creating a implementaion for BADI FAGL_DERIVE_SEGMENT,
FAGL_DERIVE_PSEGMENT,
The error is when i am going to save any of BADI implemenations, Specify filter types..
The badi is very important to meet my requirement.So How to solve this problem.
Waiting for your favourable replies.
Thanks & Regards
Maruthi.K

Hi,
Implementing a Filter-Dependent Business Add-In
If you want to use a filter-dependent Business Add-In, you will need an implementation for each relevant filter value. Multiple filter values may use the same implementation, however.
When implementing a filter-dependent Business Add-In, proceed as follows:
Create an implementation by referring to the corresponding Business Add-In definition.
Enter a characteristic filter value for the implementation, or choose F4 and select a value from the list of possible entries displayed. In principle, it is possible to define multiple characteristic filter values for each implementation.
Use the Class Editor to fill the interface method.
In the string conversion example, you would make the following entries for each country:
BRD:
translate parameter to upper case.
Ireland:
translate parameter to lower case.
Italy:
translate ...
Repeat steps 1-3 for each implementation that you create.
Activate your implementations.
Now, whenever you execute the report program described above, different country-specific implementations are executed.
Regards

Problem while creation custom Infotype for HRP (Organization mgmt)

Similar Messages

Maybe you are looking for