Problem while executing SAP transactions

Dear All,
When I am executing transaction like ME21N, ME51N its going to ABAP runtime error.Below is the runtime error description will you please go through it.
Type group was changed at runtime.

What happened?
Error in ABAP application program.
The current ABAP program "SAPLMEACCTVI had to be terminated because one of
The statements could not be executed.
This is probably due to an error in the ABAP program.

Error analysis
The type group "MMPUR" was changed while the program was running, so that an
inconsistence occurred at runtime.
The type group "MMPUR" has the version 20050805102540.
The program "%_CMMPUR" uses the version 20051012133357.
The internal session was started at 20051121083436.
Please give us the solution as soon as possible...
thanks in advance...
Nagesh Aswartha

Hi Nagesh Aswartha,
While you on the Debug, try put break points at all the occurences of the message. You do this by just pressing the enter key after /H. Once its in Debug mode follow the path
On the Menu, Breakpoints->Breakpoint at->Statement. At this point you get one pop up. In the Pop up write 'MESSAGE' and press enter. Break point inserted at every occurences of the message and you go on press F8.
Check the place where u r getting the error, and analyze the values in it. You may come to know what is the error and how it is coming in.
probably this may help you.

Similar Messages

Problem while executing the transaction code FMBV (Reconstruct)

We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,

Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors.

Error while executing SAP E-Commerce Application with UME system

When attempting to login to the B2B application (http://hostname:port/b2b/init.do), we receive the following error:
Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
I checked the defaultTrace log and every time the login page is called the following messages are displayed:
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The output is committed.
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain### at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:354)#
another 40 lines of similar text
When a login is attempted, the following messages are appended to the trace file:
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#Guest#0##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='begin' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin'#
tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='end' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin' [forward]='/login.do' [exectime]='42'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofuncionexecution]='begin' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##<hostname>_CJM_678801250#USER1#f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofunctionexecution]='end' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM' [exectime]='12'#
I have modified the userid and hostname in the above trace output.
Does anyone know how we can debug this issue further?
Thanks,
Setu

Hi,
Are you using UME login type for your B2B Scenario?
In your B2B XCM setting have you selected UME related login type?
eCommerce Developer

Problem While Executing T.CODE DP90

Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1.     We are creating Sales Order and system will create Service order automatically as per the configuration.
2.     In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
   Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PM

Hi Prashanth,
      Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of   Cost element and Blank activity type so, we are getting different material in DP90.

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Re: [iPlanet-JATO] Experiencing problem while executing model.

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Error while executing the transaction QC22 (Quality Certificate for Batch)

Hello Friends,
While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
Message no. ZQ010
Diagnosis
Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
System Response
The missing charactertistic will not be printed on the certificate,
Procedure
Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
As i am new in QM, kindly explain we were to maintain the certificate profile.
Waiting for the experts inputs.
Thanks and Regards,
Jitendra Chauhan

Hi
Try with QA33 you may have display authorization, or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
Regards
Naveen.
Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

Problem while installing SAP netweaver developer workplace

hi,
I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
[Cannot connect to host uklonki1 Connection refused: connect, -813.]
the database is online and the x-server is also started.hope anyone can help me in this problem.
with regards,
Jaisamma

Hi Michael,
I have tried that, but the result remains the same.
Manish

Facing Problem while executing a command through WLST

Hi,
Iam using Weblogic 11g(10.3.2).Whenever I execute the below command in WLST on windows it is working fine.
reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hostname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idmhost1")
But whenever i execute the same in Linux,it is throwing the error as below:
wls:/base_domain/serverConfig> reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hoistname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idm1")
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: reassociateSecurityStore
Please suggest....
Regards
Pavan

Facing Problem while executing a command through WLST

Facing a small problem while executing WDA application from portal

Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
Sridhar

Hi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar

Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1

Hi All,
We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed.
Product instance 54 not found
Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
Please suggest if someone has faced this issue.
Thanks
Sunny

Hi Sunny,
You can refer to my first blog on this topic:
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
Hope it helps.
Cheers,
Nicholas Chang

Modification problems while applying SAP Note manually

Hi Guys,
I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
Now I can go to SPAU and reset the object, but it will lose all its changes which was done
by 2 SAP notes previously.
How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
the changes for other 2 notes !!
Is there a solution for this? please help asap.
Many thanks in advance,
Sandip.

If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
I had the same problem but we had manual changes to the program that is why didnt allow to implement note

Execute SAP transaction from Outlook

Hi,
I want to know whether it is possible to open SAP transaction from out look or not. My scenario is when work item triggers from WF to Outlook, which carry a link to open SAP transaction directly from outlook. If it is possibli plz explain me in detail, what are the steps involved, if not what are the alternative solutions. We are working ECC5.0

Hi Shambu,
First, please remove your e-mail from your post as this is not according to forum guidelines.
It is possible to send a link to a transaction to outlook. It is similar to the executable attachments the extended notification and RSWUWFML2 create. You could check how they do it and reverse engineer for the transaction. But all the users need a SAPGui locally installed. This maybe a problem as the MAPI is used.
FYI the MAPI is no longer supported by SAP, it is not supported since release 4.7 I think. It has been replaced by RSWUWFML(2) which is being replaced by the extended notifications. I think there has been an article about it recently here on SDN.
Regards,
Martin

Problem while executing the web template.

Hi Experts,
       I have created a web template and while executing it, I received the following error message in the BEx Launcher.
ERROR MESSAGE:
" Exception in BI runtime
Log ID: 0002B3510136CE0500000101000001FC00044748C57DB3F0
Initial cause
Message:
Concurrent call. Connection currently used in another thread.
Stack trace:
com.sap.mw.jco.JCO$Exception: (132) JCO_ERROR_CONCURRENT_CALL: Concurrent call. Connection currently used in another thread.
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3923)
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
     at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)
     at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:20810)
Message:
JCo exception thrown when connecting to system "DB7CLNT800"
Stack trace:
com.sap.ip.bi.base.exception.BIBaseRuntimeException: JCo exception thrown when connecting to system "DB7CLNT800"
     at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.createFunction(Jco640Proxy.java:88)
     at com.sap.ip.bi.base.application.service.impl.application.ApplicationSettingsService.initializeProperties(ApplicationSettingsService.java:130)
     at com.sap.ip.bi.base.application.service.impl.application.ApplicationSettingsService.initialization(ApplicationSettingsService.java:124).........       "
      Pls help me to solve this problem.
With Regards,
Yokesh Kumar.

There has been quite some patches lately for the java runtime. Please check if you're up to date.
Cheers,
Ron

BI 7.0 Problem while executing query on Infoset containing Infocubes

Hi All,
While executing quey on infoset containing infocubes we are getting following error message.
EError while reading data; navigation is possible
EError reading the data of InfoProvider A2PPI103
EError when generating the SQL statement
E[IBM][CLI Driver][DB2] DSNT408I SQLCODE = -204, ER ROR: SAPR3.T00001 IS
I>> Row: 11 Inc: RAISE_READ_ERROR Prog: CL_RSDRV_VPROV_BASE
any idea what could be the reason ?

Hi All,
it's very interesting the question of HariPrasad because from yesterday i have the same problem in a similar environment:
@5C\QError@     Error reading the data of InfoProvider ZC1ITS02
@5C\QError@     Error when generating the SQL statement
@5C\QError@     [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -204, ERROR: SAPBWD.T00002 IS AN UNDEFINED NAME DSNT41 8I SQLSTATE   = 42704 SQLSTA
May the SQL generator does'nt work well whit cube and DB2 ??
If i execute the Infoset with the debbugging option i can see the SQL code:
...........FROM "/BIC/PZC1CPROD0" "T00001",
"T00002"
WHERE................
the first table is an infoobject, the second one is the "missing" cube...............
Hari, did you solve the problem in the meantime ??
Thank's to all, Ray.

Problem while executing SAP transactions

Similar Messages

Maybe you are looking for