Problem while installing solaris 10 on HP proliant DL 380 G5.

Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]

I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected.

Similar Messages

  • Error while installing Solaris 10 using Solaris CD

    I'm getting an error while installing Solaris 10 in an Ultra 10 box.
    I have Solaris CDs (Total 4) and I have installed Solaris 10 in a Ultra 250 box , I did not get any problem. That means CDs are fine.
    But when I try to boot the CD 1 from bootPROM mode by giving the following command
    ok boot cdrom
    I get the following error :
    rebooting with CD command boot cdrom
    boot device : /pci@1f, 0/pci@1 , 1/idi@3/cdrom@2 ,0:f file and args
    Cant read disk label
    Cant open disk label package
    evaluating : boot cdrom
    Cant open boot device
    Then the box boots up with Solaris 8 which it has now..
    Can anyone please help me to solve this issue ?
    Thanks

    With the above information , I just wanted to tell you that the CD rom is getting detected as i can view all files in the CD.,,

  • Install solaris 10 on Proliant 1600 - Compaq Smart Array 221

    I'm trying to install solaris 10 06/06 on a Proliant 1600 with smart array 221.
    I boot from the cd and choose the first option (Solaris), then I get this warning:
    WARNING: failed to program IO space [0/20/2] BAR@0x20 length 0x20
    and the system hang up.
    Does anyone know to what it is related to?
    Thank you
    Andrea V

    I have the save problem when installing Solaris 10 on my System.
    my configuration:
    Proliant 1600
    Compaq Smart Array 221
    1 CPU 550mhz
    512M RAM
    It would be nice if somebody could help.
    Edit:
    The system crashes in the same way when I try to boot the "install check CD 1.1."
    Message was edited by:
    darthich

  • Problem while installing CS6, Please Help

    Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.

    Hi,
    Please share your system configuration on which you are trying to install Ps CS6.
    Regards,
    Ashutosh
    Ps Installer QE

  • Problem facing installing Solaris 10 on Dell inspiron 6400.

    Hi,
    I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
    It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
    Please help...
    Thanks In Advance
    Saurabh

    Hi all,
    I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
    No Solaris Driver
         No Solaris Driver
         Multimedia
         Intel Corporation
         82801G (ICH7 Family) High Definition Audio Controller
    No Solaris Driver
         No Solaris Driver
         Network
         Intel Corporation
         PRO/Wireless 3945ABG Network Connection
    Solaris 10 11/06
         Solaris 10 11/06
         Firewire
         Ricoh Co Ltd
         Unknown device
         hci1394
    Note-1
         Note-1
         Network
         Broadcom Corporation
         BCM4401-B0 100Base-TX
         bfe
    Solaris 10 11/06
         Solaris 10 11/06
         Video
         Intel Corporation
         Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
         vgatext
    Solaris 10 11/06
         Solaris 10 11/06
         Storage
         Intel Corporation
         82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
         pci-ide
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #1
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #2
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #3
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #4
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB2 EHCI Controller
         ehci

  • Re: problem while installing WEB-enyterprise

    Ciao Rajeev
    It looks like you don't have the http directory under your active
    environment.
    Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
    '$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
    peace
    Claudio
    -----Original Message-----
    From: Rajiv Srivastava <[email protected]>
    To: [email protected] <[email protected]>
    Date: Tuesday, January 19, 1999 8:48 PM
    Subject: problem while installing WEB-enyterprise
    while running escript to install HTTP library on my machine(WINNT server)
    i am getting a error -
    system Error : There are no distributions available for the application
    HTTP
    can anybody help.
    rajeev
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Starmgmjo,
    Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
    http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :  "mac os x snow leopard cannot be installed on this computer"  And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1

    Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : 
    "mac os x snow leopard cannot be installed on this computer" 
    And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1
    Intel Core 2 Duo
    1.83Ghz
    l2Cache: 2mb
    Memory : 2GB
    Bus Speed: 667MHz
    Please help me......
    Thanks

    Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
    Please suggest me what to do???
    Thanks

  • Have a problem while installing Asmlib packages

    hi all
    I have some problem while installing ASMlib packages.
    my OS=Redhat linux 5.3
    kenel version using this command uname -r=2.6.18-128.el5
    I have downloaded packages and successfully installed following 4
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
    but while installing following got error
    rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
    kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
    kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
    kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
    thanx in advance

    I think you just need below rpms to configure asmlib:
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    Read this thread:
    Error install ASMLib on RedHat linux

  • A problem while installing webdynpro

    Hi all:
          there is a problem while installing webdynpro:
    The SAP NetWeaver Developer Studio 7.0.17 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
    Click Finish to exit the wizard. For detailed error descriptions, please open file://D:\nwds\NWDS\NWDS\J2EE-R~1\IDE\setup\saplogvw.exe .
    The following program files could not be registered:
         c:\windows\system32\librfc32.dll
    The installed applications may not function correctly until all program files are successfully installed.
    Could you please tell me how to solve it ?

    Hi
    Please have a look on these similar thread
    1.[Problem in installation SAP Netweaver 2004s |Problem in installation SAP Netweaver 2004s;
    2.[Installation error during installing SAP NetWeaver developer studio|Installation error during installing SAP NetWeaver developer studio 7.0.11;
    Best Regards
    Satish Kumar

  • Problem while Installing adobe pro X

    we have purchased adobe CS6 full version at biotech park, lucknow. and facing some problem while installing adobe pro X component out of all the given component. kindly help me on this..

    What system? What is the exact error? Provide more info and the install error summary.
    Mylenium

  • Problem while installing SAP netweaver developer workplace

    hi,
    I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
    [Cannot connect to host uklonki1 Connection refused: connect, -813.]
    the database is online and the x-server is also started.hope anyone can help me in this problem.
    with regards,
    Jaisamma

    Hi Michael,
    I have tried that, but the result remains the same.
    Manish

  • I am experiencing a problem while installing Adobe Flash player 10

    I am experiencing a problem while installing Adobe Flash player 10

    iam e
    xperiencing aproblem while installing adobe flash player10

  • Pages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

    ages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

    Who knows what "ages" means to you, or what speed Internet connection you have, or what else is happening on your computer or network.
    Pages/iWork are not small so it can take a while. Sometimes heavy demand at the Apple end can slow their server as well.
    Peter

  • Problem while installing NWSneakPreviewSP11

    Hi All,
           I am facing a problem while installing NWSneakPreviewSP11.In installation 29 phases available.
    It complete 17 phases successfully but get stuck at 18 phase.
    The 18 phase is "Load java DataBase Content" and At status bar it's showing Info:"EP_LOCK_APPLS loaded" message.I have seen view Log also this is not showing any error Message.
    What could be the possible reason to get stuck installation ....?
    Plz tell me how can i resolve this problem.
    Arun Sharma

    Some of the reasons could be:
    1.  You do not have sufficient DB Space
    2.  If it is SP11, you did not set your system Timezone to "Amsterdam, Berlin..." which is +1 GMT
    3.  You might be using JDK other than 1.4.2_08 (this problem was reported when 1.4.2_10 was used)
    HTH
    Venkat

  • I am facing problem while installing iTunes

    I am facing problem while installing iTunes with this error
    "There is problem with you installer package. A program required for this install to complete could not be run."

    Hi Owen,
    I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
    I was trying to understand the code that it creates. I won't be able get the code also.
    I would like to go from other way apart from B1DE.
    Need Urgent Help...

Maybe you are looking for

  • How do I connect my ATV to my Yamaha receiver, pvr, Sony Bravia, and DVD player?

    Note: I am not very savvy with this stuff so basic lingo please ;) I have a lot of hdmi inputs & outputs. I had it all connected & working except for the surround sound wasn't playing for Apple TV. I have 3 hdmi's on the TV labeled 1, 2 & 3. The rece

  • Problem itunes after upgrade ios 6

    Hello everyone: After to upgrade to IOS 6 I'm having problems to connect with iTunes Store from my iPad. The message is: Impossible to connect to iTunes Store. For this reason it don't be able to upgrade or buy applications directly in my iPad. I had

  • Editing theme images in 3.0.1

    Hi All, In 3.0.1 the images for a template are in the database in the /i/themes/opal (or whatever the template name is). I want to edit some of the images(slices) of my copy of a template using Fireworks. How can I accomplish this? Keep Smiling, Bob

  • File send to FTP

    Hi Friends, I generated a file and i strored in application server, now i want to move the same file into server SAPFTP. could u plz tell me how can I move this file to the servr SAPFTP? thanks in advance. with regards, magesh.s

  • OAS 4.0.8.1 Performance - Redhat 6.1

    I have noticed a few comments from other members of technet regarding Linux-based OAS performance. I, too, have notice considerable lag times in web/admin requests (as compared to an NT install on a similar box). As well, the java applet takes FOREVE