Problem while starting GP work flow from Wedynpro application

Hi Experts,
I have one more problem in my workflow.
1. Data entry from - User1
2. Verification. - User2 - Multiple Users.
3. Post - User3
Requirement: I need to start GP workflow from webdynpro application, i am able start a GP from webdynpro static users.
Problem: I am not able assign dynamically users( Context parameter mapping to role).
If i assign(User) role at before starting process from coding i am able to start a process, if i select context parameter and without assign user it is giving exception like:
com.sap.caf.eu.gp.exception.api.GPEngineException: Enter a role Action_2 of role type 2
Selected context parameter and i assign user from coding :
com.sap.caf.eu.gp.exception.api.GPEngineException: Enter a role Action_2 of role type 2
Action_2 is second level in my workflow.
If i select context parameter it is not starting process, i won't select context parameter process it starting..
I need get the user from backbend and assign to second level in my workflow.
Please give any solution to this problem..........
Regards,
Satya.

Similar Messages

Severe problem while starting Lenovo 3000 N200

Dear friends & experts,
I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a black and white window is being displayed which contains the following message:
We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight to your choice.
Seconds until Windows starts:30.....1
After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts. I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3.
A point to be noted is that earlier, I removed the Rescue & Recovery from my system thinking that it might not be of much use and now, I lament for it.
When I press F3 the same window appeared and the same problem recurred.
I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
I request you to help me in solving this problem so that I can continue my studies peacefully.
Thanking you,
With regards,
T.I. Kiran

First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
Good luck.

How to start/stop process flow from sql*plus?

Hi,
i know how to start a process flow via sqlplus_exec_template.sql, but i cannot find any information on how to stop (and rollback) a working flow from sql*plus. Any help would be appreciated.
Greetings
Christoph
Message was edited by:
ctrierweiler

Hi,
I've had a go.
How should I interpret the results of list_requests:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Er zijn geen rijen geselecteerd.
owner_owr@ORKDEV01>
Whilst a process flow is executing the last query will list executions, all of which have status BUSY:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Audit ID Status Name Date Owner
394512 BUSY PF_ONB01 04-MEI-06 09:11:12 OWNER_OWX
395328 BUSY ONB:FULL_PREPARE 04-MEI-06 09:11:55 OWNER_OWR
395324 BUSY PF_ONB01:ONB 04-MEI-06 09:11:55 OWNER_OWR
owner_owr@ORKDEV01>
As an aside, I will attempt to get rid of the READY deployment and deployment unit using deactive_deployment.sql
Now, if I attempt to use deactivate_execution.sql on any of the executions with status BUSY I get:
owner_owr@ORKDEV01> @deactivate_execution
Voer waarde voor 1 in: 396136
declare
FOUT in regel 1:
.ORA-20003: The object is not in a valid state for the requested operation
ORA-06512: at "OWNER_OWR.WB_RTI_EXCEPTIONS", line 94
ORA-06512: at "OWNER_OWR.WB_RTI_EXECUTION", line 774
ORA-06512: at "OWNER_OWR.WB_RT_EXECUTION", line 90
ORA-06512: at line 4
owner_owr@ORKDEV01>
So all the seems to remain is to use abort_exec_request.sql
This does the job, but the script itself hangs.
I think it has to do with the l_stream_id not being checked again after the initial IF. I think it should probably be part of the loop condition as it is again reset in the do_acks inside the loop.
Cheers & thanks,
Colin

Problem while starting DBConsole in windows?

Hi ,
Here i am facing problem while starting "OracleDBConsoleoracle". oracle is my oracle_sid.
when am trying to start this service from services in windows it is showing the error... please see the below link..
http://picasaweb.google.co.in/rajeshbalusu/Oracle
can anybody suggest me what is the problem?
My S/W Details..
OS : Windows XP Professional Version 2002 Service Pack 3
Database : Oracle 10gR2
Thanks
Rajesh

rajeshbalusu wrote:
Hi ,
Here i am facing problem while starting "OracleDBConsoleoracle". oracle is my oracle_sid.
when am trying to start this service from services in windows it is showing the error... please see the below link..
http://picasaweb.google.co.in/rajeshbalusu/Oracle
can anybody suggest me what is the problem?
My S/W Details..
OS : Windows XP Professional Version 2002 Service Pack 3
Database : Oracle 10gR2
Thanks
RajeshPlease check Event Viewer to find out the error raised during startup of the specific service

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Problem while starting Weblogic 7.0..please help

Hi,
Im facing this problem while starting the weblogic.
Below is the error i get...
<Nov 3, 2006 6:11:29 PM IST> <Alert> <WebLogicServer> <000297> <Inconsistent security configuration, java.lang.Exception: Certificate expired or not yet valid:
fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California
L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certi
ficate Authority Constraints [email protected] , key = modulus length=65, exponent length=3>
java.lang.Exception: Certificate expired or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after
= Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key = modulus length=65, exponent length=3 at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:219)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1556)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:891)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:300)
at weblogic.Server.main(Server.java:32)
<Nov 3, 2006 6:11:29 PM IST> <Emergency> <Security> <090034> <Not listening for SSL, java.io.IOException: Inconsistent security configuration, Certificate expir
ed or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before
= Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com Email=s
[email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key =
modulus length=65, exponent length=3.>
I have updated my license.bea file also. the date of expiration="2006-12-02" ..
Please suggest as to how to proceed
Thanks and Regards
SmitaUdupa

Your server certificate expired. You need to update your identity keystore with a new certificate.
The expired certificate was issued by the demo BEA certificate authority (CA). These certs are not adequate for production but if you want to take this approach for your new cert you'll have to use the BEA CertGen utility. Have a look at http://edocs.bea.com/wls/docs70/secmanage/ssl.html for more details.
Your other option is to use Java's keytool utility to create a private key. You'd then generate a certificate signing request (CSR) that you'd send to a CA such as Verisign. You might even have a CA in-house. The CA will then send you a signed certificate that you load in your keystore. Assuming you've configured WebLogic to use this keystore you should be back in business with SSL.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Problem in Starting a GP Process from Webdynpro Code

Hi Experts
I have a problem in starting a GP Process from webdynpro code. I have imported the following used DCs in my Webdynpro DC
caf/eu/gp/api/wd
caf/eu/gp/api (external)
com.sap.security.api.sda
Once I deploy I get the following error. No Syntax, Build errors in the application.
java.lang.NoClassDefFoundError: com/sap/caf/eu/gp/process/rt/api/IGPRuntimeManager
I have used the following code to start the GP Process - getUserDetails Context is of type IUser
          //Starting GP Process
try {
IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(
     wdContext.currentContextElement().getUserDetails());
IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                    "00A897714C5A11DE8E33005056A260C3", userContext);
IGPStructure params = GPStructureFactory.getStructure(process.getInputParameters());
IGPProcessInstance prInstance = rtm.startProcess(process,
                    "New User Registration Process",
                    "New User Registration Process",
                    wdContext.currentContextElement().getUserDetails(),
                    roles,
                    params,
                    wdContext.currentContextElement().getUserDetails());
} catch (Exception e) {
     e.printStackTrace();
Please do the needful EXPERTS.
FYI... SP17
Thank you
Best Regards
Ramamoorthy D

Hi Ram,
You have to add Library reference to your DC.
in the context menu of your DC select
properties->webdynproReferences->LibraryReference
add sap.com/cafeugp~api as refernce.
I hope this will solve your problem.
Regards,
Rajesh

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

Code source works fine from console application but not from SharePoint interface

Hi;
Please can you help
me to understand why my code below works fine from console application (VS 2010) and not working from interface of my SharePoint collection site :
From console application : the subsite is created and I can to open without any problem
From Sharepoint GUI : the subsite is created but impossible
to open subsite : error 404 page not found ?
The subsite creation is very long (2 minutes) and in concole application When I try to open the subsite just after its creation I have page not found and I must waits (several refresh) more time to open the subsite correctly.
Can be I must to display a PoPup to show the progress creation ?
using System;
using System.Security.Permissions;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Security;
using Microsoft.SharePoint.Utilities;
using Microsoft.SharePoint.Workflow;
namespace CreateSubSiteClients.EventReceiver1
    public class EventReceiver1 : SPItemEventReceiver
        public override void ItemAdded(SPItemEventProperties properties)
                 base.ItemAdded(properties);
                 try
                     SPWeb web = properties.OpenWeb();
                     if (properties.List.Title == "REFCLIENTS")
                         SPListItem curItem = properties.ListItem;
                         string name = properties.ListItem["SITE"].ToString();
                         curItem["SiteUrl"] = web.Url + "/" + name;
                         SPWeb rootWeb = web.Site.RootWeb;
                         SPWebTemplateCollection webTemplates = rootWeb.GetAvailableWebTemplates(1036);
                         SPWebTemplate webTemplate = null;
                         String webTemplateName = "ModeleSiteCourrier";
                         String webTemplateSearchName = "";
                         for (int i = 0; i < webTemplates.Count; i++)
                             webTemplateSearchName = webTemplates[i].Name.ToString();
                             if (webTemplateSearchName.Contains(webTemplateName))
                                 webTemplate = webTemplates[webTemplateSearchName];
                                 break;
                       SPWeb newSite = web.Webs.Add(name, name, name, Convert.ToUInt16(1036), webTemplate, false, false);
                        newSite.Navigation.UseShared = true;
                        newSite.Update();
                        newSite.Close();
                        Console.WriteLine("Le site suivant a été crée", name);
                 catch (Exception ex)
                     properties.Status = SPEventReceiverStatus.CancelWithError;
                     properties.ErrorMessage = ex.Message.ToString();
                     properties.Cancel = true;
Regards

Hi,
To create subsite using event receiver in SharePoint Empty Project, you can refer to:
Sharepoint 2010 event handler to create subsites
To display a PoPup to show the progress creation, you can use: MessageBox.Show("Hello, world.");
More information:
MessageBox.Show Method (String)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to make data flow from one application to other in BPEL.

Hi All,
I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
Experience people please guide.
Sales Person -----> Sales Manager ----> Production Manager
Thanks
Yatan

Yes you can do this.
If you each integration point to be in different process, you have to create three BPEL process.
1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
-Ramana.

Problem while starting Managed Servers from Admin Server console

I am facing a problem while trying to start the managed servers in wlp8.1 portal from the admin server console.
<Dec 7, 2004 4:52:14 PM IST> <Info> <NodeManager@*.*:5555> <Starting Server orbitPortalDomain::orbit_ManagedServer1 ...>
<Dec 7, 2004 4:52:16 PM IST> <Info> <NodeManager@*.*:5555> <Server orbitPortalDomain::orbit_ManagedServer1 started, process id = 1,832>
<Dec 7, 2004 4:52:17 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.4.2_04-b05 from Sun Microsystems Inc.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://10.6.0.212:7001 to check if there exists a running admin server at this URL.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic XMLX Module 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973 >
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://10.6.0.212:7001 to retrieve the initial configuration.>
<Dec 7, 2004 4:52:21 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\bea_turner\weblogic81\common\nodemanager\orbit_ManagedServer1\orbit_ManagedServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/bea/wsrp/util/debug/Debug
at com.bea.wsrp.security.WSRPIdentityAsserterProviderImpl.<clinit>(WSRPIdentityAsserterProviderImpl.java:45)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.createSecurityProvider(SecurityServiceManagerDelegateImpl.java:232)
at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:939)
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:257)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.java:698)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:731)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:874)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:717)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
Reason: com/bea/wsrp/util/debug/Debug
pls advice
Thanks
Sasanka

Hello,
There is a lot of stuff on this thread:
http://forum.java.sun.com/thread.jspa?threadID=567363&messageID=2801617
these guys are trying to run weblogic with JBuilder.
Looks like your classpath is incorrect, can you go to your admin console-->server-->remote start
copy the classpath and post it here.
Check for spaces in your classpath, missing jars or directories and miss spelt paths.
Has this problem been occuring as soon as you installed WLP or not?
Cheers,
Hoos

Problem while starting Portal Service from service configuration

While starting Portal service i am getting following error message:
"Server xxxxx:Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic"
Please help me to reolve this error
Edited by: Pande Sagar on Jul 15, 2010 11:46 AM
Edited by: Pande Sagar on Jul 15, 2010 11:49 AM

Following is the PortalApp.xml file
<?xml version="1.0" encoding="UTF-8"?>
<application alias="sample">
<application-config>
    <property name="ServicesReference" value="com.sap.portal.ivs.connectorservice,com.sap.portal.ivs.internalconnector"/>
</application-config>
<components/>
<services>
    <service name="sample">
      <service-config>
        <property name="className" value="sample"/>
      </service-config>
      <service-profile>
        <property name="test" value="na"/>
      </service-profile>
    </service>
</services>
</application>
sample.java file
package samp;
import com.sapportals.portal.prt.service.IServiceConfiguration;
import com.sapportals.portal.prt.service.IServiceContext;
public abstract class sample implements Isample{
private IServiceContext mm_serviceContext;
     public void init(IServiceContext serviceContext)
     mm_serviceContext = serviceContext;
     public void afterInit()
public void configure(IServiceConfiguration configuration)
     public void destroy()
public void release()
public IServiceContext getContext()
      return mm_serviceContext;
      public String getKey()
      return KEY;
Isample Interface
package samp;
import com.sapportals.portal.prt.service.IService;
public interface Isample extends IService
     public static final String KEY = "MySample.sample";
     public String hi();
Edited by: Pande Sagar on Jul 19, 2010 2:04 PM
Its getting deployed properly but from system administration >> system configuration >> service configuration >> from application >> administrate service >> List of services >> HERE ITS GIVING AN ERROR >> Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic
Edited by: Pande Sagar on Jul 19, 2010 2:06 PM

Problem while starting on a workflow

Hello,
I am using SharePoint 2013 online.
I have one site collection, that I am the owner of him, and I have full control on all sites.
I have a workflow that create a new item In a form library, and when I am trying to activate him it always failed.
the internal status is:
RequestorId: b1bc1314-d192-a837-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access
denied. You do not have permission to perform this action or access this resource."}}} {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["55"],"SPRequestGuid":["b1bc1314-d192-a837-b1bb-5c1835644592"],"request-id":["b1bc1314-d192-a837-b1bb-5c1835644592"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["16.0.0.1810"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 07 Aug 2013 00:56:41 GMT"],"P3P":["CP=\"ALL IND DSP COR ADM CONo CUR CUSo IVAo IVDo PSA PSD TAI TELo OUR SAMo CNT COM INT
NAV ONL PHY PRE PUR UNI\""],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine`1.SubroutineChild.Execute(CodeActivityContext
context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)
The work flow have no problems when I checked him In the SharePoint designer.
What should I do?
Thanks
Tamir Maimon

Hi,
Base on the description, you fail to start workflow thought you have full control on all sites .
I suggest you to add you to the site with edit permissions. This ended up being a permission for the user initiating the workflow though they had permissions to edit the entire site adding them to the site with
edit permissions (directly and not through an AD group) fixed the problem.
I also suggest you to create User Profile Service Application and then you need to create Sync connection and run full sync. All SharePoint 2013 workflows must be started from real users, not system
account.
Here are some similar threads for you to take a look:
http://sharepoint.stackexchange.com/questions/63041/how-do-you-track-down-workflow-errors-in-sharepoint-2013
http://www.sharepointviking.com/system-unauthorizedaccessexception-when-running-sharepoint-2013-workflows/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fe78502c-9e49-4ad6-9e0c-40a439c54e57/workflow-cancelled-with-a-sharepoint-designer-2013-workflow
In addition, this thread seems to related to SharePoint Online. You’d better to post your question to the forum for Office 365:
http://community.office365.com/en-us/f/default.aspx .The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read
the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Best Regards,
Linda Li

Error while starting disp+work

Hello Friends,
I am getting the following error while starting thesystem.Please help me in solving the problem. I have seen this problem has happened for many people but no solution provided. Points rewarded for helpfull answers.
error from dev_disp:
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) http://dpxxdisp.c 1239
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Feb 05 16:11:12 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5355
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >INLD50044432A_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04E60040, size: 4205552)
DpShMCreate: allocated sys_adm at 04E60040
DpShMCreate: allocated wp_adm at 04E61A28
DpShMCreate: allocated tm_adm_list at 04E632E0
DpShMCreate: allocated tm_adm at 04E63310
DpShMCreate: allocated wp_ca_adm at 051D35A0
DpShMCreate: allocated appc_ca_adm at 051D3A50
DpShMCreate: allocated comm_adm at 051D3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05254DB0
DpShMCreate: allocated gw_adm at 05254DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05254E20
DpShMCreate: allocated wall_adm at 05254E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Feb 05 16:11:13 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( INLD50044432A) http://dpxxdisp.c 11663
Tue Feb 05 16:11:14 2008
DpStartStopMsg: send start message (myname is >INLD50044432A_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Feb 05 16:11:54 2008
ERROR => W0 (pid 2280) died http://dpxxdisp.c 14318
ERROR => W1 (pid 2088) died http://dpxxdisp.c 14318
ERROR => W2 (pid 1504) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 3396) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2328) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 3316) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 3776) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
error from dev_w0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
http://dbsdbsql.cpp 112
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
http://dbsdbsql.cpp 136
B ***LOG BV3=> severe db error -10709 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
B ***LOG BY2=> sql error -10709 performing CON dblink#3 @ 431 dblink 0431
B ***LOG BY0=> Connection failed (RTE:Database name is missing) dblink#3 @ 431 dblink 0431
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1426
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10240
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server INLD50044432A_NSP_00 on host INLD50044432A (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Feb 05 16:11:15 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 720
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 260
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2280) http://dpnttool.c 327
Rgds,
Dinesh

Hi Bidwan,
        I tried executing the command for XUSER, Executed successfully. Still i am getting the same error..
Error logs for dev_w0
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C    (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C    (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C    (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C    (0.051) DB50 perm block defect (note 934194)
C    (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C    (0.045) Signal 11 during creation of BIA index (note 920743)
C    (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C    (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C    (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2    BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 112]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]
I would like to mention that no SIDadm user has been created in windows user account. But installation was successfull
Rgds,
Dinesh

Problem while starting the weblogic managed server

Hi,
I am facing the following error while starting the managed weblogic server :
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException:
java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:66)
at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the
file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.store.io.file.Heap.open(Heap.java:185)
at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:88)
at weblogic.store.internal.PersistentStoreImpl.recoverStoreConnections(PersistentStoreImpl.java:332)
at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:323)
at weblogic.store.xa.PersistentStoreManagerXA.createFileStore(PersistentStoreManagerXA.java:104)
at weblogic.store.xa.PersistentStoreManagerXA.createFileStore(PersistentStoreManagerXA.java:177)
at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:85)
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:64)
... 4 more
Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file
"WLS_DIAGNOSTICS000000.DAT"
at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:214)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:104)
at weblogic.store.io.file.Heap.open(Heap.java:183)
... 11 more
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:52)
at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:139)
at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:118)
at weblogic.store.io.file.StoreFile.open(StoreFile.java:148)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:96)
... 12 more
>
The WebLogic Server encountered a critical failure
Reason: Assertion violated
Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class
weblogic.protocol.ServerIdentityManager$Initializer
at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:64)
at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:172)
at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:801)
at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:423)
at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:409)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:187)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:458)
at weblogic.Server.main(Server.java:67)
Kindly suggest some solution for this.
Best Regards,
Varun

Hi,
I killed the processes hunged up and now m facing the following error while starting the managed weblogic:
<Oct 12, 2012 3:01:53 AM PDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger.
weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
at com.thortech.xl.security.wl.XellerateAuthenticationProviderImpl.<clinit>(XellerateAuthenticationProviderImpl.java:73)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:51)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: com.thortech.util.logging.Logger
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
Truncated. see log file for complete stacktrace
>
<Oct 12, 2012 3:01:53 AM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 12, 2012 3:01:53 AM PDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Problem while starting GP work flow from Wedynpro application

Similar Messages

Maybe you are looking for