Problem while starting solution manager.

Hi all,
i have installed solution manager on windows2003. when i tried to start the solution manager dispatcher is getting stopped and workprocess in abap process list is getting ended status of disp+work.exe is j2ee info unavailable.how can i resolve this issue.
here i am giving the develpoer trace
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SO1
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    52
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2584
Sun Feb 21 12:26:02 2010
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2584) [dpxxdisp.c   1231]
     shared lib "dw_xml.dll" version 52 successfully loaded
     shared lib "dw_xtc.dll" version 52 successfully loaded
     shared lib "dw_stl.dll" version 52 successfully loaded
Sun Feb 21 12:26:03 2010
     shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 3901
Sun Feb 21 12:26:07 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >wipro_SO1_01                            <
DpShMCreate: sizeof(wp_adm)          12672     (1408)
DpShMCreate: sizeof(tm_adm)          3954072     (19672)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1452)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05D00040, size: 4607512)
DpShMCreate: allocated sys_adm at 05D00040
DpShMCreate: allocated wp_adm at 05D01E28
DpShMCreate: allocated tm_adm_list at 05D04FA8
DpShMCreate: allocated tm_adm at 05D04FD8
DpShMCreate: allocated wp_ca_adm at 060CA570
DpShMCreate: allocated appc_ca_adm at 060D0330
DpShMCreate: allocated comm_adm at 060D2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06153130
DpShMCreate: allocated gw_adm at 06153170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 061531A0
DpShMCreate: allocated wall_adm at 061531A8
Sun Feb 21 12:26:08 2010
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Sun Feb 21 12:26:09 2010
J2EE server info
  start = TRUE
  state = STARTED
  pid = 2408
  argv[0] = E:\usr\sap\SO1\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = E:\usr\sap\SO1\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=E:\usr\sap\SO1\SYS\profile\SO1_DVEBMGS01_wipro
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=2190
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=SO1
  argv[7] = -DSAPMYNAME=wipro_SO1_01
  argv[8] = -DSAPPROFILE=E:\usr\sap\SO1\SYS\profile\SO1_DVEBMGS01_wipro
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
***LOG Q0K=> DpMsAttach, mscon ( wipro) [dpxxdisp.c   11414]
DpStartStopMsg: send start message (myname is >wipro_SO1_01                            <)
DpStartStopMsg: start msg sent
Sun Feb 21 12:26:10 2010
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
DpJ2eeLogin: j2ee state = CONNECTED
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Sun Feb 21 12:26:21 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1532
     (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2204) [nixxi.cpp    4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2408)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun Feb 21 12:26:49 2010
ERROR => W0 (pid 2340) died [dpxxdisp.c   14021]
ERROR => W1 (pid 972) died [dpxxdisp.c   14021]
ERROR => W2 (pid 2336) died [dpxxdisp.c   14021]
ERROR => W3 (pid 2776) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 2124) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 1900) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 672) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 2772) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 2684) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thanks&Regards
Dinesh

Hi Dinesh,
On 2nd thoughts, I think the problem is to do with the DNS.
I found this problem in your log that you posted:
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS
check your c:\windows\system32\drivers\etc\hosts , it should contain your hostname (name of your windows box) and the FQDN if you have a domain install.
Also ensure you have defined your SAPGLOBALHOST  in your startup profiles.
Hope that helps.
Regards,
Siddhesh

Similar Messages

  • Problems while starting the Managed Server through Node Manager..

    When I was trying to start a Managed Server using the Nodemanager , I am getting the following error :
    NodeManager not configured to receive commands from host : emis-develop
    I have the "nodemanager.hosts" file under the directory "c:\bea\wlserver6.1\config" and even while invoking the script for the startnodemanager , I am indicating this in the script ! Any ideas for this problem ??

    The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.> You may configure custom Identity and Trust in weblogic. It is not recommended to use Demo Trsut and Demo Identity for environments higher to Dev. -
    http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/identity_trust.htm#i1202182
    Regards,
    Anuj

  • Problem while starting the managed server

    Hi
    We have following configuration :-
    We have 2 physical sesrvers :-
    Server1 and Server2 in Sun Cluster running Solaris 10.
    We also have Oracle DB server 9.2.0.8 in RAC mode, one instance each on Server1 & Server2.
    Server 1 :-
    cluster1 :- 1 Managed Server running
    Server 2 :-
    cluster2 :- 1 Managed Server running
    we are getting following error in admin server log :-
    <Error> <NodeManager> <BEA-300034> <Could not execute command "kill" for server "cluster1" using the node manager. Reason: Connection refused. Couldn't connect to NodeManager. Check that it is running at localhost:5556.>
    Recently we have enabled the Connection Filter.
    also getting following info in logs :-
    <Notice> <Socket> <BEA-000445> <Connection rejected, filter blocked Socket[addr=192.193.164.8,port=53666,localport=8001], weblogic.security.net.FilterException: [Security:090220]rule 16>
    <Notice> <Socket> <BEA-000445> <Connection rejected, filter blocked Socket[addr=163.37.174.126,port=58284,localport=8002], weblogic.security.net.FilterException: [Security:090220]rule 17>
    Is it because of any misconfiguration in Connection filter ?
    Or filter is not allowing the request for ipaddress and port of Managed Server in cluster1
    Thanks in advance .. :)

    Thanks for the information.
    Node Manager is not used.
    I found problem in Connection filter.
    169.187.186.76 - address ManagedServer1
    169.187.186.77- address Managed server2
    169.187.186.51 :- Admin Server (8001 is http and 8002 is https)
    Tunneling is enable for Managed Server
    Please help me understanding below things is there any ambiguity in this rules :-
    In the script to stop Managed server we are using t3 protocol like : t3://ip:port but its not allowing t3 protocol .whereas t3 protocol is no where denied in rules.
    If I use https to issue request still not working
    <connection-filter>weblogic.security.net.ConnectionFilterImpl</connection-filter>
    <connection-filter-rule>127.0.0.1 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.0.129 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.1.1 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.59 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.51 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.76 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>192.168.10.4 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.4.1 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.77 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.60 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.0.130 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.1.2 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>192.168.10.5 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.4.2 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>ocs1.in.citicorp.com 169.187.186.51 8002 allow https</connection-filter-rule>
    <connection-filter-rule>* 169.187.186.51 8001 deny</connection-filter-rule>
    <connection-filter-rule>* 169.187.186.51 8002 deny</connection-filter-rule>
    Thanks in Advance .......

  • Problem while starting the weblogic managed server

    Hi,
    I am facing the following error while starting the managed weblogic server :
    weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException:
    java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:66)
    at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the
    file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.Heap.open(Heap.java:185)
    at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:88)
    at weblogic.store.internal.PersistentStoreImpl.recoverStoreConnections(PersistentStoreImpl.java:332)
    at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:323)
    at weblogic.store.xa.PersistentStoreManagerXA.createFileStore(PersistentStoreManagerXA.java:104)
    at weblogic.store.xa.PersistentStoreManagerXA.createFileStore(PersistentStoreManagerXA.java:177)
    at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:85)
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:64)
    ... 4 more
    Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file
    "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:214)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:104)
    at weblogic.store.io.file.Heap.open(Heap.java:183)
    ... 11 more
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
    at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
    at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:52)
    at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:139)
    at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:118)
    at weblogic.store.io.file.StoreFile.open(StoreFile.java:148)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:96)
    ... 12 more
    >
    The WebLogic Server encountered a critical failure
    Reason: Assertion violated
    Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class
    weblogic.protocol.ServerIdentityManager$Initializer
    at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:64)
    at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:172)
    at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:801)
    at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:423)
    at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:409)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:187)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:458)
    at weblogic.Server.main(Server.java:67)
    Kindly suggest some solution for this.
    Best Regards,
    Varun

    Hi,
    I killed the processes hunged up and now m facing the following error while starting the managed weblogic:
    <Oct 12, 2012 3:01:53 AM PDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger.
    weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
    at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
    at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
    at com.thortech.xl.security.wl.XellerateAuthenticationProviderImpl.<clinit>(XellerateAuthenticationProviderImpl.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:247)
    at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:51)
    at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: com.thortech.util.logging.Logger
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
    Truncated. see log file for complete stacktrace
    >
    <Oct 12, 2012 3:01:53 AM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Oct 12, 2012 3:01:53 AM PDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  • Error while starting weblogic Managed Server

    Hi ,
    I am new to SOA 11g. I installled the latest version(11.1.1.4) of all the components.I started web logic and able to login into Admin Console but I have a problem
    while starting Managed Server.It gives me an error saying
    <Feb 2, 2011 2:01:29 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17
    from Sun Microsystems Inc.>
    <Feb 2, 2011 2:01:30 PM IST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.management.ManagementException: Unable to obtain lock on C:\Oracle\Middleware\user_projects\domains\fmw_domain\servers\AdminServer\tmp\AdminServer.lok.
    Server may already be running
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:58)
    at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:74)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:879)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:566)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:467)
    at weblogic.Server.main(Server.java:71)>
    <Feb 2, 2011 2:01:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Feb 2, 2011 2:01:30 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Feb 2, 2011 2:01:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Can anyone help ?
    Regards,
    Vikas Manchanda
    Edited by: 829347 on Feb 2, 2011 12:48 AM

    How are you starting the managed server? Is it a new install? The error suggests that the managed server is already running. You could check the windows task manager to see if there is a Java process running (or two if managed and admin server is on the same machine)
    Damien

  • Error while starting oam managed server

    Hi Experts,
    I am facing the following errors while starting the managed oam server instance.
    I am using 11gR2.
    <Jan 8, 2013 12:13:32 PM IST> <Error> <oracle.jps.audit> <BEA-000000> <IAU:IAU-5
    048: Problem in transferring audit record to Audit Store null null. Please verif
    y your Audit Store configuration>
    <Jan 8, 2013 12:13:49 PM IST> <Error> <oracle.security.audit.logger> <BEA-000000
    <IAU:JNDI Resource does not exist JNDI Name=AuditDB><Jan 8, 2013 12:13:49 PM IST> <Error> <oracle.jps.audit> <BEA-000000> <IAU:IAU-5
    047: Problem in transferring audit record from file:C:\Oracle\MIDDLE~1\USER_P~1\
    domains\OAM_OA~3\servers\oam_server1\logs\auditlogs\OAM\audit.log position:898,9
    24 will retry in next cycle. caught exception oracle.security.audit.AuditExcepti
    on: javax.naming.NameNotFoundException: Unable to resolve 'AuditDB'. Resolved ''
    ; remaining name 'AuditDB'
    at oracle.security.audit.ajl.loader.OracleRepository.<init>(OracleReposi
    tory.java:84)
    at oracle.security.audit.ajl.loader.JDBCLogWriter.reinit(JDBCLogWriter.j
    ava:59)
    at oracle.security.audit.ajl.loader.JDBCLogWriter.write(JDBCLogWriter.ja
    va:104)
    at oracle.security.audit.ajl.loader.AuditLoader.readMessages(AuditLoader
    .java:488)
    at oracle.security.audit.service.AuditLoaderManager.readMessages(AuditLo
    aderManager.java:209)
    at oracle.security.audit.service.AuditLoaderManager$Runner.run(AuditLoad
    erManager.java:284)
    Caused by: javax.naming.NameNotFoundException: Unable to resolve 'AuditDB'. Reso
    lved ''; remaining name 'AuditDB'
    at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
    NamingNode.java:1139)
    at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
    a:252)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
    ava:182)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:20
    6)
    at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.j
    ava:254)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:412)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at oracle.security.audit.ajl.loader.OracleRepository.<init>(OracleReposi
    tory.java:74)
    ... 5 more
    Any pointers would be appreciated.
    Thanks,
    Subin

    Hi Subin,
    Once the server is started, is Auditing to DB successful?
    Assuming that you have auditing to DB configured and that it is generally working, I suspect that the errors messages are occurring during the time when the server is making the jndi sources available to the server. If so, the messages are harmless (although I do not think they should happen).
    Regards,
    Colin

  • Error while starting the managed server using nodemanager

    HI ,
    I am getting the below error while starting the managed server from the Admin console. All the serverstart and the node manager proeprties looks fine.
    Below is the error in the managed server log,
    startWebLogic.sh: grep: not found
    startWebLogic.sh: uname: not found
    startWebLogic.sh: test: argument expected
    can you help me to solve the problem please. i am using weblogic 10.3.3
    thanks
    Arun

    I think you've changed and added some lines into your startWebLogic.sh script. Can you put your script here?

  • AuditLogFileException while starting a managed server

    Hi all,
    I implemented custom JAAS authentication for WLS 7.0 server and console. There
    are no issues with a standalone or single server in the domain. When testing an
    AdminServer with a managed server, I could still start the Admin Server without
    any problem after configuring the security realm. I got the following errors while
    starting the managed server. I tested with both servers on the same machine.
    Any help would be appreciated.
    <Server failed during initialization. Exception:weblogic.security.service.AuditLogFileException:
    Couldn't rename C:\bea7\user_projects\deletedomain\.\DefaultAuditRecorder.log
    to C:\bea7\user_projects\deletedomain\.\DefaultAuditRecorder.log2598.old
    weblogic.security.service.AuditLogFileException: Couldn't rename C:\bea7\user_pr
    ojects\deletedomain\.\DefaultAuditRecorder.log to C:\bea7\user_projects\deletedo
    main\.\DefaultAuditRecorder.log2598.old
    at weblogic.security.service.AuditLogFile.<init>(AuditLogFile.java:98)
    at weblogic.security.providers.audit.DefaultAuditProviderImpl.createLogF
    ile(DefaultAuditProviderImpl.java:106)
    at weblogic.security.providers.audit.DefaultAuditProviderImpl.initialize
    (DefaultAuditProviderImpl.java:89)
    at weblogic.security.service.SecurityServiceManager.createSecurityProvid
    er(SecurityServiceManager.java:1752)

    Hi,
    Please remember to mark the answers accordingly... Helpful or correct... You will be helping the forum community by doing that.
    First thing to fix is the Admin_URL, there should be something like:
    -Dweblogic.management.server=http://localhost:7001How are you starting this managed server? Node manager or command line? Try both options and see if they bring up the same error.
    Cheers,
    Vlad

  • Facing some problem while configuring Workflow Manager 1.0.

    Hi,
    I am facing some problem while configuring Workflow Manager 1.0. in my farm.
    Scenario is,
    I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working. 
    Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually" 
    And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed" 
    If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting")  and don't starts.
    I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups. 
    Also given permission to databases, and assign role of sysadmin and dbcreator to user
    I also tried following steps    
        1) Stop all services associated to workflows
        2) Uninstalled workflow manager
        3) Deleted all databases associated with workflows
        4) Installed workflow manager and tried to configure.
    But showing same error. 
    If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
    We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
    sysadmin, and dbcreator role to local admin.
    I am attaching snapshot of error for better understanding.
    Your help will be very precious to me. 
    Thanks,
    Rajesh
    Rajesh Agravat

    Rajesh
    Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
    Service Bus Message Broker
    Service Bus Gateway
    Workflow Manager Backend
    All of these should be running and your workflow service account should be running all of these.  If any are still configured under the old service account, they'll need to be updated.  Next, check to see what service accounts have access to the
    Workflow Manager 1.0 databases:
    SbGatewayDatabase
    SbManagement
    SbMessageContainer
    WFInstanceManagement
    WFManagement
    WFResourceManagement
    The Workflow Manager service account should be mapped as the DBO for all of these.  if any are still configured under the old service account, they'll need to be updated.
    Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation.  Do it thus:
    Launch Workflow Manager Configuration Wizard
    Select the Leave Workflow Manager Farm
    Stop all workflow services (see above list)
    Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
    Delete all Workflow Manager databases (see above list).
    reboot.
    Start new installation.

  • A problem on Sap Solution Manager

    Hi all,
    I got a problem with Sap Solution manager and i hope that you will be able to help me…
    I’ll try to do my best to be understood in English =)
    So, here is my goal :
    I want to use SolMan as a workbench for test with eCATT. I made a very simple test with the transaction SECATT : A script for a customer creation by the transaction XD01.
    This script works well, so I’ve done the “test configuration”, the “Test data” and the “system data”.
    At this point, I don’t have any problem. If I launch the test, it works. (Important point maybe : I work in remote from an environnement dedicated to SolMan toward a production one).
    When I try to put this test in SolMan, there appear my problems.
    I don’t really know SolMan for the moment, but it seems that I have to begin  by the transaction “SOLAR01” which lead me to the “Business blueprint change”. But I can’t modify anything in it, as the system always tells me the following error : “You cannot change (or There are no) Structure nodes”.
    Maybe I’m not going in the good way, but I try every transaction in SolMan, like Configuration, Test plan management or project overview & Administration. I filled all field I could, but it’s not working for the moment.
    I just want to know how to get my test in a workbench, in a test plan on SolMan…
    Can you help me ?
    Thx a lot
    R.P.
    (P.S : Of course, if you got a step by step document, I would be pleased to receive it ! =))

    Hello Papillon,
    What I understand from your contribution: You do not seem to have a problem working with the Test Workbench in general but would like to know how to work with the Test Workbench as integral part of SAP Solution Manager.
    The basic idea of SAP Solution Manager is that you have the possibility of doing a process-oriented testing (instead of straight module or functioned-oriented testing with regular Test Workbench functionality).
    This is why in SAP Solution Manager you would start of with setting up a project (in transaction SOLAR_PROJECT_ADMIN), in which you define a <i>process-oriented</i> blueprint structure in the next step (transaction SOLAR01) and attach test cases to your process-oriented structure (in transaction SOLAR02) afterwards.
    You will find a guide dedicated to testing topics in SAP Solution Manager here:
    <a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000213552006E">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000213552006E</a>
    This guide should provide sufficient guidance and walks you through the whole process, explaining why and how you operate the above mentioned transactions and much more.
    Best regards,
    Doreen Baseler

  • Facing Problem in Starting Weblogic Managed Server

    Hi,
    While starting a managed server through Weblogic Console it is giving "nodemanager is not running" related error. I am not sure what is happening here. It was working fine earlier.
    Thanks
    Pawan

    Hi,
    Please check wheather node manager is running inside the server. Please check the nodemanager listen port in nodemanager.properties file and issue below command from your server.
    netstat -a |grep "port"
    Regards,
    Kishore

  • Severe problem while starting Lenovo 3000 N200

    Dear friends & experts,
    I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
    Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a  black and white window  is being displayed which contains the following message:
    We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
    If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration  to revert to the most recent settings that worked.
    If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
    Safe  Mode
    Safe Mode with Networking
    Safe Mode with Command Prompt
    Last Known Good Configuration (your most recent settings that worked)
    Start Windows Normally
    Use the up and down arrow keys to move the highlight to your choice.
    Seconds until Windows starts:30.....1
    After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts.  I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
    I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
    Setup did not find any hard disk drives installed in your computer.
    Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
    Setup cannot continue. To quit Setup, press F3.
    A point to be noted is that earlier, I removed the Rescue & Recovery from my system  thinking that it might not be of much use and now, I lament for it.
    When I press F3 the same window appeared and the same problem recurred.
    I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
    I request you to help me in solving this problem so that I can continue my studies peacefully.
    Thanking you,
    With regards,
    T.I. Kiran

    First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
    More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
    The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
    As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
    One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
    Good luck.

  • Error while starting the managed server

    Hi,
    While starting the managed server i get ClassNotFoundException for the following files.
    oracle.as.jmx.framework.wls.spi.StartupListener - jmxframework.jar
    oracle.security.jps.wls.JpsWlsStartupClass - jps-wls.jar
    oracle.security.audit.ajl.loader.JEEAuditLoader
    oracle.dms.wls.DMSStartup - dms.jar
    oracle.core.ojdl.weblogic.ODLConfiguration - odl2.jar
    oracle.ias.cache.Startup -
    oracle.mds.lcm.weblogic.WLLifecycleListener
    oracle.dms.wls.DMSServletFilter
    When checked I found jars related to above classes in BEAHOME/jdeveloper/modules folder.
    are the jars also present some where in weblogic related folders.
    Also "wsil-wls" and "dms" applications are not properly deployed in the ManagedServer.
    When I am trying to deploy another application in managed server i get DMSServletFilter ClassNotFoundException.
    I tried to add the above jars from jdeveloper folder to the POST_CLASSPATH in setDomainEnv.sh but i still get the same ClassNotFOundException while deploying.
    Which config file should i update?
    Thank You.

    I think you've changed and added some lines into your startWebLogic.sh script. Can you put your script here?

  • Problem while starting Weblogic 7.0..please help

    Hi,
    Im facing this problem while starting the weblogic.
    Below is the error i get...
    <Nov 3, 2006 6:11:29 PM IST> <Alert> <WebLogicServer> <000297> <Inconsistent security configuration, java.lang.Exception: Certificate expired or not yet valid:
    fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California
    L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certi
    ficate Authority Constraints [email protected] , key = modulus length=65, exponent length=3>
    java.lang.Exception: Certificate expired or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after
    = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key = modulus length=65, exponent length=3 at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:219)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
    at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1556)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:891)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:300)
    at weblogic.Server.main(Server.java:32)
    <Nov 3, 2006 6:11:29 PM IST> <Emergency> <Security> <090034> <Not listening for SSL, java.io.IOException: Inconsistent security configuration, Certificate expir
    ed or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before
    = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com Email=s
    [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key =
    modulus length=65, exponent length=3.>
    I have updated my license.bea file also. the date of expiration="2006-12-02" ..
    Please suggest as to how to proceed
    Thanks and Regards
    SmitaUdupa

    Your server certificate expired. You need to update your identity keystore with a new certificate.
    The expired certificate was issued by the demo BEA certificate authority (CA). These certs are not adequate for production but if you want to take this approach for your new cert you'll have to use the BEA CertGen utility. Have a look at http://edocs.bea.com/wls/docs70/secmanage/ssl.html for more details.
    Your other option is to use Java's keytool utility to create a private key. You'd then generate a certificate signing request (CSR) that you'd send to a CA such as Verisign. You might even have a CA in-house. The CA will then send you a signed certificate that you load in your keystore. Assuming you've configured WebLogic to use this keystore you should be back in business with SSL.
    Mike
    Weblogic/J2EE Security Blog: http://monduke.com

  • Problem while starting DBConsole in windows?

    Hi ,
    Here i am facing problem while starting "OracleDBConsoleoracle". oracle is my oracle_sid.
    when am trying to start this service from services in windows it is showing the error... please see the below link..
    http://picasaweb.google.co.in/rajeshbalusu/Oracle
    can anybody suggest me what is the problem?
    My S/W Details..
    OS : Windows XP Professional Version 2002 Service Pack 3
    Database : Oracle 10gR2
    Thanks
    Rajesh

    rajeshbalusu wrote:
    Hi ,
    Here i am facing problem while starting "OracleDBConsoleoracle". oracle is my oracle_sid.
    when am trying to start this service from services in windows it is showing the error... please see the below link..
    http://picasaweb.google.co.in/rajeshbalusu/Oracle
    can anybody suggest me what is the problem?
    My S/W Details..
    OS : Windows XP Professional Version 2002 Service Pack 3
    Database : Oracle 10gR2
    Thanks
    RajeshPlease check Event Viewer to find out the error raised during startup of the specific service

Maybe you are looking for

  • JSF - Read a text file and diplay lines of text data on the web page

    Hello, For one of my projects, I need to display lines of text data on the web page using Java Server Faces Technology. The raw data could be from simple text files or sockets or anything. (Getting the data is not my issue but displaying is). Could a

  • Error when trying to install Adobe Acrobat Pro, recently purchased.

    Recently purchased Adobe Acrobat Pro, when trying to install get an error message 'Your account subscription cannot be validated'. Have tried several times, double checked login etc, but same message each time. Please help, how to fix this issue??

  • Last payment date shown in credit master sheet is wrong.

    Hi, The last payment date and amount in the credit master sheet S_ALR_87012218 does not reflect the true last payment info. As per the payment history list, there have been more recent last payments after the last payment date shown on the credit mas

  • How to increase the size of the Data file?

    There are two factors afftecting the datafile size. One is the block_size, the other is the MAX_Blocks. How can I increase these two number to increase the datafile size? I am building the raster dataset. And I have several terabyte images. But curre

  • Photo's are not displayed in iPhoto

    I can see Events and can click on them to see pictures, but when I click on the individual photos, they are not displayed, although I can see them in the "filmstrip' at the bottom of the screen. iPhoto will show the names if someone is tagged in the