Problem while using an adobe form "Unable to fulfil request for memory"

Hi Experts,
When I try to call a Adobe Form from the porta,l the system encounters a problem and the error message is "Unable to fulfil request for 3665920 bytes of memory space.".Could yopu please provide you valuable suggestion to resolve the issue.
Thanks.
Arun.

Hey fellow ADS developer,
I had this issue once and had hard time to figure out from where it was coming!
In fact, check the free space on your SAP Server hard disk (or ask admin guys). It might be that there is no more hard disk! Because every time you generate a form, it is stored on your server harddisk. You need to flush all that temp stuff regularly.
Hope this helps
Yann

Similar Messages

Unable to fulfil request for 3665920 bytes of memory space.

Hi Experts,
I am facing the error " Unable to fulfil request for 3665920 bytes of memory space." when I try to call adobe form document from portal.The profile parameter ztta/max_memreq_MB has value of Min - 5 and Max - 2048.
Please let me know your valuable suggestions to resolve the issue.
Thanks in advance.
Regards,
Arun.

Hello,
I am facing the same issue as well. However, this profile param has a max value of 2048 right? The current value in our system is 2047. It means that this can not be extended anymore. If that is the case, is there any other way?
Thank you.
Mark

Unable to fulfil request for 528700 bytes of stora ge space.

Hi all,
I have a problem with messages getting stuck in XI, and
if I check QRFC monitor I get a SYSFAIL with message
"Unable to fulfil request for 528700 bytes of storage space."
So nothing passes thru.
Any idea where to start solving the error?
Regards,
Fredrik

Hello,
does anybody have a solution to this problem?
We've also already enlarged the ztta / max _ memreq _ MB parameter to 2048. In ST22 i can see the SYSTEM_NO_ROLL dump. The message there is "Unable to fulfil request for 310373472 bytes of memory space". When the message is processed i can see in ST02 that the Max.use of Extended memory is growing to 1.290.240 (about 1.3GB).
If somebody has a solution out there please let me know.
Thanks
regards
Florian

Error: Unable to fulfil request for 262144 bytes of memory space.

Hi experts,
When running a query and 30 minutes after that, I received an error message from BW:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Unable to fulfil request for 262144 bytes of memory space.
Can someone help me with this?

Hi Bob,
Many thanks for your reply. I believe your observation is correct. I can run the report when I choose only one month instead of 17 months.
However, do you think that something can be done on BW server to eliminate this problem? Is there not enough memory on BW server to fulfil this request?
Thanks.

Query - unable to fulfill request for 65536 bytes of memory space

Hi all,
When i executing query it is running for 20 mins and showing this below error. Please guide me on this.
Error:
- Unable to fulfill request for 65536 bytes of memory space
- No more storage space available for extending an internal table
Note:
Report design based on cube and it have around 60 laks records, aggrated and compression already available for this cube.
Thanks & Regards,
R. Saravanan

Hi raj,
Are you trying to execute the report in BEx analyzer?
if data is huge try to reduce the volume of data with the help of filters for ex run the report for particular material, date ,cost center etc.
If you are using BEx analyzer and with MS office -2003 version then Ms excell has a limitation of 65536 rows, this might be causing the error.
Looks like your report is having more than 65536 records (selections for which your report was run).
if you want all the records to be displayed try to use WAD. or use the MS excel 2007 or greater versions(not sure if it can hold all your 60 lack records).
Regards
KP
Edited by: prashanthk on Feb 1, 2011 3:09 PM

Unable to fulfil request for 3971508 bytes of memory space in SMQ2 -SYSFAIL

Hi Experts,
In Production Server PI SMQ2 transaction, I am getting SYSFAIL Status for a specific Queue Name <XBTO6___0000>. When I am double clicking it is showing "Unable to fulfil request for 3971508 bytes of memory space". I have tried to "Execute LUW" but the status is not changing at all. I have gone to the Message in SXMB_MONI, it is showing "Recorded for Outbound Processing".
Please advice as it is continously taking more and more Queue Entries.
Thanks,
Nabendu.

Hi Nabendu,
May be this thread will help you...have a look..
Re: Unable to fulfil request for 528700 bytes of stora ge space.
Regds,
Pinangshuk.

How to avoid Print pop-up while using a Adobe form.

Hi Experts,
I am calling a adobe form from a BAPI.I am using the following function modules FP_FUNCTION_MODULE_NAME and CALL FUNCTION fun_name. But when I try to execute the BAPI a print preview pop-up appears.Please let me know the steps to avoid the print preview pop-up while execution of the BAPI.
Thanks in Advance.
Warm Regards,
Arun.

Hello
I don´t understand the connection between BAPI and the printing program. I guess - at least that is what I have done - is to generate the form when creating and invoice or something, then I could understand.
When you ask for GETPDF = 'X' then you always get the PDF data back and not the popup.
Or if you would like to display the print preview without a print settings popup. Or variants...
FUNCTION ZPDF_SET_OUTPUT_MODE.
*"*"Lokální rozhraní:
*" CHANGING
*" VALUE(FP_OUTPUTPARAMS) TYPE SFPOUTPUTPARAMS
fp_outputparams-dest = 'ZPDF'.
fp_outputparams-nodialog = 'X'.
fp_outputparams-preview = 'X'.
ENDFUNCTION.
regards Otto

Current page printing problem - while repeating pages : Adobe forms

Hi Experts,
I have a problem in printing current page number of an adobe form.
My requirement is that , my form got 2 pages. On first page i am not printing page numbers and excluded from numbering.
Numbering starts from second page. The second page needs to be repeated twice.
In this case my page printing should look like :
First page - no page number
second page - 1 of 1
Third page - 1of 1 (as it is a copy)
IF second page extends to multiple pages (eg.. 2)
First page - No Page no
First instance of second page - 1of 2 , 2 of 2
Second instance of second page - 1 of 2 , 2 of 2 . Presently it is printing like : 3 of 2 , 4 of 2. I need to initialize current page count. I could able to set the total page count 2 via variable from print program. But while printing the second instance, I am not able to initialize the current page count.
I have seen the following thread which exactly talks about my problem but with out any solution.
Re: Adobe Forms - Page Count
Can any one help me in this regard.
Thank You,
Regards,
Naresh.

Hi,
I am not sure how your page design looks like.
Assumption:
During runtime, ONLY 1 page for Page1, multiple pages for Page2 and Page3, same number of pages for Page2 and Page3.
This is what i did:-
I have 3 pages:
Page1: With NO page number: ONLY 1 page
Page2: With page number: Multiple page
Drag the "Insert -> Custom -> Page n of m"
- TextField: "CurrentPage",
-- replace the original script: "this.rawValue = xfa.layout.page(this)" with "this.rawValue = xfa.layout.page(this) - 1"
- TextField: "PageCount",
-- replace the original script: "this.rawValue = xfa.layout.pageCount()" with "this.rawValue = ( xfa.layout.pageCount() - 1 ) / 2"
Page3: With page number: Multiple page
Drag the "Insert -> Custom -> Page n of m"
- TextField: "CurrentPage",
-- replace the original script: "this.rawValue = xfa.layout.page(this)" with "this.rawValue = xfa.layout.page(this) - 1 - ( xfa.layout.pageCount() - 1 ) / 2"
- TextField: "PageCount",
-- replace the original script: "this.rawValue = xfa.layout.pageCount()" with "this.rawValue = ( xfa.layout.pageCount() - 1 ) / 2"
Good luck.

Problem while using struts 1.3.8

Hi All,
I have some problem while using struts 1.3.8 in my application.
I am using OC4J 10.1.2.0.2, my simple coding is follows:
<%@ page contentType="text/html;charset=utf-8"%>
<%@ taglib uri="/WEB-INF/tlds/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="/WEB-INF/tlds/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tlds/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tlds/struts-logic.tld" prefix="logic"%>
<html:xhtml />
<html:form action="<action page>" method="POST" enctype="multipart/form-data" >

 <label for="Subject" >* Subject:</label>
 <html:text size="40" property="subject" />


 <label for="upload" >Attachment:</label>
 <html:file size="40" property="attachmentFile" />


 <html:submit />
after clicking my the submit button in the server console i m getting
JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.tiles.commands.TilesPreProcessor.doForward(TilesPreProcessor.java:260)
at org.apache.struts.tiles.commands.TilesPreProcessor.execute(TilesPreProcessor.java:217)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.ed.ecomm.edcore.web.filters.SecurityFilter.doFilter(SecurityFilter.java:196)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.MonitoringFilter.doFilter(MonitoringFilter.java:138)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:92)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
further i investigate and i removed the "enctype=multipart/form-data" from the form attribute its working fine..
but without using this attribute struts doesn't support the "upload" i.e, form file... its throwing another exeception..
could you anyone please let me know whether i can change my OC4J server version of anything need to do..
many thanks in advance

I'm having the same exact problem. Any ideas?
Schema sfactory;
Schema schema;
sfactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
ErrorHandler eHandler = new MyErrorHandler();
sfactory.setErrorHandler(eHandler);
LSResourceResolver lsrResolver = new MyLSResourceResolver();
sfactory.setResourceResolver(lsrResolver);
schema = sfactory.newSchema(new File(argv[1]));The last line gives me NullPointerException. I know the file (argv[1]) exists and can be read because I can print it with a BufferedReader.

Using the Adobe Forms for printing through portal

Hi All,
I've got a problem with the fact that I do not know exactly how to use the Adobe Forms from the portal.
I've got the Form Objects done (Interface & Form using SE80) and they work OK when testing the form. The Interface gathers all the datas etc. and the form displays this correctly.
My problem now is that I need to have this form available from the portal, and this I presume needs some WebDynPro stuff or something else? I'm totally lost on this part ...
The customer wants to have a button or link in the portal that opens a new window with the produced PDF opened in the new window, much like opening a static PDF file. The user then has the option to print the PDF him/herself using Adobe Readers own print mechanism.
My interface has only one Import parameter (PERNR number) and one EXPORT parameter (default). The PERNR number must be supplied to the interface so that it can gather all the needed data based on this number.
Any help on this will be greatly appreciated and rewarded accordingly.
Thankyou in advance,
Kim

Hi Arnab,
from a forms point of view:
(I assume you have the ADS up and running on the Java stack. Without it, the form generation doesn't work.)
If you create your form in transaction SFP and execute the corresponding program that calls the form for testing in SE38, you get to the print dialogue. Here you may choose either locl or lp01 (or any other printer accessible through your network) and then select Print Preview. This should then display the PDF in SAP GUI.
If you are asking about general printer setup within SAP, check the corresponding documentation: http://help.sap.com/saphelp_nw04s/helpdata/en/d9/4a8eb751ea11d189570000e829fbbd/frameset.htm
Hope this helps,
Markus

What is use of Adobe forms

HI Gurus,
I have some doubts on adobe forms.
we are developing adobe forms for getting out put in PDF formate .
but we have same features in smartforms also like we can give the output in pdf to the client .
recently i faced this problem in pre sale actitvity .
Client manage asked me so many questions in adobe forms
questions are
1. What is use of adobe forms
2. we are can get the out put in pdf formate through smartforms . then why you are suggesting buy pdf licenced software .
3.what is extra functionality you are providing to end user
please can one give clear usege and advatages avalable in adobe
please dont tell as abaper point view please suggest me as a enduser point of view
Regards
RameshG

Hi,
Use of Adobe form:
As of SAP NetWeaver u201904 (in SAP Web Application Server), you can use a new solution to create interactive forms and print forms for the optimization of your form-based business processes. This solution uses Portable Document Format (PDF) and software from Adobe Systems Inc. that has been integrated into the SAP environment.
You can create interactive forms in PDF format that allow users to fill out the form on the screen and save their entries in XML format in the form. When the SAP system receives the PDF form, it extracts the data saved in the form, and can process it further.
Smart form Vs Adobe form
Smart forms / scripts are used to show the data in SAP. Most likely you will use these to print / display some kind of reciepts / forms.
but, Adobe forms are used to post data into SAP from SAP too.
●      Create form templates for the layout that include logos or pictures
●      Generate documents by merging form templates and current system data
●      Edit forms online or offline
●      Forms can be filled in advance automatically with specific data from SAP applications and then sent to the correct recipients using secure methods
●      Automatic consistency checks for forms
●      Activate enhanced functions such as comments
●      Digital signatures and form certification
●      Send completed forms to the SAP application with automatic updates of the business data
For More reference,
http://help.sap.com/saphelp_nw70/helpdata/en/32/20709747d649e8bc74e084d0b2432c/frameset.htm
By
Parthi

Proxy problem while using pkgbuild..

Hi all,
I was trying to makepkg a certain theme. When I was in my college I used a certain proxy...but at home I have dhcp. I have edited rc.conf accordingly and I can browse the web. I can also use pacman to install stuff. However makepkg(or rather wget) still thinks I am using my college proxy..
[spai@spai xfce4-axe-theme]$ makepkg -s
==> Making package: xfce4-axe-theme 1-1 i686 (Thu May 14 10:57:19 IST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading 73291-axe.tar.gz...
--2009-05-14 10:57:19-- http://xfce-look.org/CONTENT/content-files/73291-axe.tar.gz
Resolving iiscproxy.serc.iisc.ernet.in... failed: Name or service not known.
wget: unable to resolve host address `iiscproxy.serc.iisc.ernet.in'
==> ERROR: Failure while downloading 73291-axe.tar.gz
Aborting...
So is there a way to solve this resolve problem?
Thanks all,
Spai
Last edited by Isomorphism (2009-05-14 05:33:32)

s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

Problem while using trigger from line of 6534

I have faced some problems while using triggering with 6534. They are listed below. Please provide solution me.
1. ) i was using pattern input with triggering(buffered) in which i am using the example given in library buffered pattern input-triggered.vi
Now i am using port 0 to take input. From line 0 of port 2 i want to generate a pulse which can trigger the operation & start acquisition. For that i am using write to single line.vi . My DPULL is open so bydefault the line will be at low level & by vi i will make it high which will trigger the operation.
In normal condition if we use write to a single line.vi it will write the given status on that line within a fraction of second and abort execution. But when i am usin
g it for trigger in following manner, it did not work.
First i started the VI buffered pattern input-triggered.vi.I have configured the start trigger with leading edge trigger. I have set the time limit properly.Synchronous operation is set at the front panel of vi.
Now if start the write to a single line.vi to give start trigger, nether it triggered the operation,nor it abort execution of single line write vi.When time out occured in triggered vi, then both vis stopped simultaneously. Why this happened?
2.) Similar problem i faced when i wanted to perform the change detection.vi Port 0 is configured for input.Line 1 to 7 are fixed with some status by connecting them to Vcc or GND. I have connected port 0 line 0 with port 2 line 0. So when i change status of line 0 of port 2 change detection should be occured o port 0. i am changing the status of line 0 of port 2 by write to a single line.vi But here i faced same problem as first that it was not writing to port 0 line 0. And bo
th process stopped when time limit occured in change detection vi.
So what can be the problem? Please help me.

Hi Vishal,
1) You should check to see that when you are writting a static 1 to line 0 you see a pulse high. You should also make sure that you wire this line to the STARTTRIG for group 0.
2) If you solve question 1 you will also have question 2 solved.
It might be helpful to create a program that configures both programs (pattern I/O on port 0 and static I/O on port 2) in the same program and then starts both groups. I would do a little testing to see exactly what signals you do or do not see.
Ron

Problem while using an adobe form "Unable to fulfil request for memory"

Similar Messages

Maybe you are looking for