Problem while using for first time the Repository in Des 6.0

After creating the Repository, with a new project, trying to use the process diagramer and defining the root process this message appears:
RME-00224: Failed to close activity
RME-00222: Failed to dispatch operation to Repository
RME-00011: Operation 'close' on ACTIVITY has failed
RME-00020: Internal API error - ORA-04031: unable to allocate 8192 bytes of shared memory ("large pool","unknown object","sort subheap","sort key")
How can I solve this problem?

Geraldo,
Please check your init.ora parameters:
max_enabled_roles = 30
sort_area_size = 262144
sort_area_retained_size = 65536
hash_area_size = 1048576
optimizer_index_caching = 50
optimizer_index_cost_adj = 25
shared_pool_size = 32000000
db_block_buffers = 2000
open_cursors = 1000
processes = 100
db_file_multiblock_read_count=16 # for a 4K Oracle block size
db_file_multiblock_read_count=32 # for a 2K Oracle block size
db_file_multiblock_read_count=8 # for a 8K Oracle block size
Davi

Similar Messages

HT201250 i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. do i keep my files in the portable hard disk when I connect it again with the macbook or the time machine will era

i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard drive

Welcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org

When itunes load   for first time ,the ios operating system load    automatically?

I connect my ipod for first time ,and   download itunes, but   an operating system doesnt show in settings /general/ doesnt appears software??
can somebody   tell me   what to do ? or if my ipod may be is not working properly? and any time I try to download an apps , read   need ios5.

What then does show?
Did you setup/activate the iPod? You have to do that via wifi (for newer ones) or conneft to iTunes and restore
iTunes: Restoring iOS software

New P-book: OK to use while charging for first time?

Hi All,
I'm getting my Powerbook today. Can I plug it in and set it all up while it's charging, or SHOULD I wait until it's fully charged? Thanks in advance for anyone's help.
-Mike

No, this will not do any damage. The thing you should do though is after that first charge is complete, go ahead and drain down to zero percent, so that it will be calibrated.
People who leave the battery charged in all the time while using the computer, do not have the battery go bad because they are using it plugged in. The reason it goes bad in that situation is because they aren't keeping the juices flowing in the battery! They don't take it off the A/C, the chemicals don't keep moving, so that shortens the life. That is why you should use a portable, not connected to A/C at least one or two times per week to at least 70 percent (use 25 to 30 percent of battery) or so.
However, the actual using of the machine while connected to A/c is no problem. Just be sure to regularly use it via battery too, to keep the chemicals moving.

Problem while using Overwrite/Addition in the Transformation

Hi Folks,
         Here the Scneario.
Source data:
Tr.No     Name     Cat     No
1               A     X     1
2     A     Y     1
3     A     X     1
4     A     Y     1
Target Expected:
          Cat X          Cat Y
Name           Unique No     Total no     Unique No     Total no
A          1     2     1     2
*Actual :     *
          Cat X          Cat Y
Name           Unique No     Total no     Unique No     Total no
A          0     2     0     2
In the above scneario.. whenever Cat X comes in, it makes Cat Y Unique to '0'. whenever Cat Y comes in, it makes Cat X Unique to '0'.
Please through some lights on it.
Thanks and Regards,
Meiy

How can i enforce the server to use url-rewriting ..because in the clinet i
disabled my cookies but still the request has attribute saying that
requestIsCookie set as true. and if i use url rewriting is it not the job of the
server while rendering the jsp to see such that all the urls should be encoded ..........You don't "enforce the server to use url-rewriting". And you don't disable cookiees in the client.
1) You can't rely on the client having cookies disabled. You can only ask them to, and why should they? I wouldn't.
2) You need to find the server setting for whatever server you use that allows you to disable it setting session cookies from the server side. Tomcat can, I believe, but I don't know where this setting is offhand. Read the documentation.
3) As for URL-rewriting, the server cannot do this for you automatically. Taglibs that generate URLs should handle this automatically, otherwise, that's a serious flaw in the tag. But regular links in a page, you have to call response.encodeURL(theURL) on the URL for the link everywhere you need the session to follow.
<a href="<%= response.encodeURL(theURL) %>">link</a>

Problem|Install iTunes problem! help for first time using iPod touch (2G)

Look i try to install the iTunes, but after press the install button, its write:
"The installer ecountered errors before iTunes could be configured.
Your system has not been modifited. To retry these operations at a later time, please run the installer again."
What to do? ****!250 Dollar on this iPod, not for free! i must have it working.
Please help me =]

Have you seen this iPod 101 tutorial? You might want to bookmark it.
http://www.apple.com/support/ipod/howto/

Can't open After Effects 5.5 - installed 2 years ago and just now using for first time

When I try to open Adobe After Affects 5.5 in Windows 7 64bit, it nearly immediately crashes and I get the following error. Can anyone help? Thanks!
After Effects error: Crash in progess.Last logged message was: <5920> <ASL.ResourceUtils.GetLanguageIDFromRegistry><0>Unableto obtain the User'Language'registry key at: Software\Adobe\After Effects\10.5\Defaulting to 'en_US'.

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Error getting in BSP while running for first time in server

Hi Experts,
Does any body knows step by step Configuration for BSP in server.
i have allready assigned paramertes in RZ11 SAPLOCALHOSTFULL and icm/host_name_full.
is there any other parameter need to apply.
When i am trying to test service BSP (sap>bc>bsp)
I am getting This Error
BSP Extention: the BSP URL/sap/bc/bsp?sap-client=800 Does Not Contain Any Namespace Entries.
Please Suggest me , How to solve This Issue.
Thanks,
Prashant

Hi,
read [this topic|http://wiki.sdn.sap.com/wiki/display/PLM/RelevantOSSNotesforPPM4.5SP4andAbove] in wiki and pay attention to note 1260386
There are a couple of interesting comments [here|BSP Exception: the BSP URL / Does Not Contain Any Namespace Entries; and [here too|BSP Exception: the BSP URL / Does Not Contain Any Namespace Entries;.

Lov is not validating when i open a form for first time

hi all,
i am using form6i.
i have one multi record block. in which lov is attached to it.
but when i open the form for first time the item corresponding the above said is not showing and if i enter the value then also its not validating against. its showing error frm-40210
but when i click on other item and come to this item Lov is showing.
what could be the reason for this strange behaviour.
i have checked set_item_properties too(there is properties have been set)
Please advice.
Thanks..

FRM-40210: Search string not found.
what could be the reason for this strange behaviour.Do you have an "Initial Value" set for the item? Do you have the "Validate from list" property set to yes or are you setting the initial value through code?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Problem While using Applet Reqd classes using Weblogic 5.1

Hi All,
Here is my problem while using other classes from the Applet gives an error:NoClassDefFound,
I have also put the applet reqd. classes in a jar file and placed this jar along with the applet
in weblogic/myserver/serverclases,
my tag in the html file is as follows:
<applet code="MyApplet.class" archive="voucher.jar"
codebase="/classes/" >
</applet>
is there any problem with my tag or directory structure,
It would be great ful and thanks for helping in solving this problem.
sai.

Is this an issue with the "T-engine" or the "J-engine"? Are you using a
ubbconfig file or weblogic.properties file? Can you post the stack trace?
This may be an known issue and simply require you to install the latest
service pack for WLS 5.1 (aka. J-engine)...
Mary Ann Slavin wrote:
Accordning to the Software Product Information (SPI) for WLE 5.1 it is
available on the following Linux versions so this could be a problem
with the version you are running.
"BEA WebLogic Enterprise 5.1 software for Red Hat Linux 6.2 and Reliant
Unix 5.45 is available separately. "
MAS
yajneesh Sabharwal wrote:
hello friends,
I have a Problem in Using Weblogic 5.1
I am using weblogic 5.1 Enterprise on Linux 2.2.16 SuSE (7.0) with
Dual Celeron 550MHz and 1GB RAM. The server runs our web application
which uses the servelt, JSP and XSQL technology. The problem is
that often i receive ASSERTION FAILURES where after the jsp's stop
displaying content. Is this a Weblogic administration problem or
the underlying OS problem. Kindly advice.
Thankx in Advance
Yajneesh sabharwal

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

How to make a program that will ask for a name the first time the program is used and if is not the first time will not ask the name?

I want to make a program that will ask for the ID of the testing machine the first time the program is running, then will never ask for it. I'm using Labview 6.0

Hi
There are a Couple of methods you can use for this.
Method 1 -
You can create an ini file and save a boolean Key "First Instance" as True. Now In your Program you read this Key, If it is True then you can show your ID Dialog VI.If False do not run the VI. At the Conclusion of Id Dialog you can update this registry enrty to False. So In effect you have created One time Event. In fact you can save ID as another Config entry.
The Drawback and advantage is that such an INI file can be edited by someone moderately knowledgeable about the Program
Method 2
Use Unitialized Shift Register in A while Loop. Please see LV2 style Globals entry under this forum. You can read and write to this Variable and it retains the Value it last had within it.
You can read
this Global the Very first time and say if it true you display your ID Vi. If False you dont. When you display your ID Vi you can Update your Global Like Before.
If you need Example Let me Know.
Good Luck
Mache!!
Good Luck!
Mache

SQL Server Management Studio - Configuring the environment for first time use

Hi
I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
Management Studio them loads and I can continue without problem.
I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
Thanks

Hi,
There is bug report of this issue:
http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
"SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
if any of these files are not available or unusable, SSMSE will generate new ones."
Hope this helps.
BR,
JoukoK

Computer keeps Configuring and setting up for first time use

I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
Thanks

It's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter

Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
Best would be to ask in the TimeMachine section Snow Leopard
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

Problem while using for first time the Repository in Des 6.0

Similar Messages

Maybe you are looking for