Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Similar Messages

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problems with Street View

new street view from new google map release shows black screen

I'm having similar problems with Street View on openSUSE. For the time being you can try to switch back to the classic Google Maps.
https://support.google.com/maps/answer/3045828?hl=en&ref_topic=3093612

Open Transaction MM01/MM02 with multiple views using CALL TRANSACTION

Hi All,
I want to open MM01/MM02 with multiple views using call transaction but in the parameter ID for Views (MMX) I can pass status of only one View.
SET PARAMETER ID 'MAT' FIELD v_mat.
SET PARAMETER ID 'VKO' FIELD ' '.
SET PARAMETER ID 'MTA' FIELD IT_MOFF-MTART.
SET PARAMETER ID 'MTP' FIELD IT_MOFF-MBRSH.
SET PARAMETER ID 'VTW' FIELD ' '.
SET PARAMETER ID 'BWT' FIELD ' '.
SET PARAMETER ID 'LGT' FIELD ' '.
SET PARAMETER ID 'MXX' FIELD 'K'. "Sales View
SET PARAMETER ID 'MM5' FIELD ' '.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN
Please suggest.
Regards,
Divya

I do not exactly understand what you mean, but what i already did:
- I checked that the fields are from the same type.
- KUNNR is initialized! I already had a look to the debugger, that's why i'm posting this in this forum.
any more comments on this ?
maybe i have to change anything in the z-transaction. Btw, this is what the parameter looks like in the transaction:
SELECTION-SCREEN BEGIN OF BLOCK Debitoren WITH FRAME TITLE text-001.
PARAMETERS pkunnr type kna1-kunnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK Debitoren.
Edited by: Sven Delangle on Sep 3, 2010 2:42 PM

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Problem with 2 View Objects based on One Entity -Probably a Bug in ADF BC

Hi
I am using JDeveloper 10.1.3(SU5) and adf faces and ADF BC and to explain my problem I use HR schema.
First, I created 2 view objects based on countries table named as TestView1 and TestView2. I set TestView1 query where clause to region_id=1 and TestView2 query where clause to region_id!=1 in the view object editor and then I created 2 separated form on these 2 view objects by dragging and dropping from data control palette.
Now when I insert a record in the form based on TestView1 with region_id set to 1 and commit the record and go to the next form I can see the record in the second form which is completely wrong since it is against the where clause statement of the second form.
I am really confused and the situation is very wired and it seems to me something like bug in adf bc.Am I right.Is there any work around or solution for solving this problem.
Any help would be highly appreciated.
Best Regards,
Navid

Dear Frank,
Thank you very much for your quick response.
Reading your helpful comments now I have some questions:
1- I have commited the record in the database so shouldn't the query of view objects be re-queried?
2- We try to use ClearVOCaches (entity_name,false) in afterCommit of the base entity object but unfortunately it does not work correctly. after that,We got root app module and used findViewObject method to find all the view of that entity (we have found them by using name not automaticlly) and called executeQuery of all views. From my point of view it has 2 big disadvantages. First suppose that this entity is an important entity and 4 or 5 viow objects are based on it. Now, For inserting one record we should re-execute 4 or 5 view which I think makes some performance issues. Besides, If during the development one programmer add a new view object based on this entity and don't add the executeQuery in the afterCommit for this view, again we have the same problem. Isn't there at least a way that automatically refresh all related view objects however the performance issue still exists.
3- You mentioned that this issue is handled in the developer guide. Could you kindly give me a refrence which developer guide you mean and which section I should read to overcome this problem.(I have ADF Developer's Guide for Forms/4GL Developer's Guide , however I search for clearVOCaches and surprisingly nothing was found!!!)
4- Could you please give me some hints that from your point of view what is the best method to solve this problem with minimum performance effect.
Any comment would be of some great help.
Thanks in advance,
Navid

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Problem with creating/viewing PDF's from InDesign CS3

I have a problem with our PDF workflow and just cannot seem to resolve it.
The problem is as follows: My coworker and I (both designers running CS3 on iMac's running 10.5.6 Leopard) work daily on producing documents and graphic layouts.
Internally we can view and print PDF documents we create just fine with no troubles with the exception of our supervisor, who is running a mac with Tiger operating system. Our office environment is both Mac and PC. On may occasions he cannot print PDF's we create. Many times his prints will contain garbled characters, drop italics and formatting, replace fonts, or just print slowly.
This problem is also happening to our editor who is offsite. This is a fairly serious problem for her, considering her job relies heavily on being able to view and open PDF files we create. She was able to send a PDF file which shows the garbled mess her printer spit out when she printed. Apparently there were pages upon pages of messy garbled text. When documents do print from her, they are usually very slow in printing, taking up to a minute or more to print each page.
The sample of what she sent me is attached, and can also be found on my MobileMe iDisk at: http://public.me.com/rlcollier (document entitled Print Results.PDF)
My question really to the community is obviously what might be causing these problems. Its very frustrating not being able to determine if its something we're doing ourselves thats causing some incompatability or corruption in these files, or if its the users systems themselves. I can say that Debra our editor has can have a garbled mess of a 4 page file from us, and then turn around and print a graphic heavy 90 page PDF with ease from Boeing. Our PDF's seem to be the only ones she struggles with. That being said, my inclination is that its something on our end.
Any ideas of where to start looking? Any help at all would be greatly appreciated and welcomed. Thanks!

I currently had our editor test printing of some of our files using both Foxit and Adobe Reader (as was suggested) in order to see if either made a difference in her printing ability and here is what she came back with:
I tried to print out both these pdfs (David's is the one you reworked and Lisa's HESSM-3, both sent yesterday).
With Adobe: David's first page printed quickly, but it had errors (part of his pants didn't print, and there's an arbitrary shaded box in the text). Page 2 didn't print--every time I tried it had a different "offending command" code. Printing Lisa's HESSM made it up to page 7 before problems showed up (stock photo only partially printed), and it stopped on page 8 (with the random "offending command" code).
With Foxit: Both David's and the HESSM pdfs printed completely and without error...but it took a long time. David's 2 pages took about 3 to 4 minutes, and HESSM's 16 pages took close to 20 minutes. The time is in the transfer of data to the printer; the physical printing goes pretty quickly.
I cant say that I believe email is the problem, although I cant rule it out. I've tested emailing vs. passing through our workgroup with my supervisor, and it does not make any difference in his ability (or lack of ability) to print our files. He was able to print to a different printer (an HP 4650 as opposed to a 4100) without troubles. He refuses to believe its a printer problem however because PDF files originating from our office are the only ones he has trouble with. Never has he had any trouble with a single PDF file produced from any other source. This is also the case for our editor who only has trouble with PDF files originating from either mine, or my coworkers systems.
PS: I've attached both files that were referenced by our editor above for viewing/testing.

Problem With Image View After Cropping

Hi All,
I have a problem when I try to crop an image in CS4. The crop tool works perfectly, however sometime the cropped image has parts of the image “out of line” I believe the problem is just with the view, not the actual file. I have saved the image and opened it in MS Picture Viewer and the image is perfect.
I was using Windows XP without a problem. I have only experienced this since I upgraded to windows 7 64 bit.
Below is a screen shot of the problem, not the bottom right of the image. Any suggestions please.
Thanks - Vicki

No, it was me. Feel free to review the thread history at this URL if you'd like: http://forums.adobe.com/message/4206899
Your display driver IS out of date. You really don't want the one from Microsoft's WHQL
If you would like to be able to use the OpenGL-specific features, listed on the page below, as well as not have display corruption, I recommend you update SPECIFICALLY to Catalyst 11.7 (which carries driver version 8.872). Anything up to 11.12 is probably okay, but 12.1 has some very specific problems with Photoshop. Several of us on the forum here have had particularly good, solid results from 11.7.
http://kb2.adobe.com/cps/405/kb405745.html
-Noel

Problem with GET PARAMETER in "O4K_LICENSE" Transaction

Hi folks,
I am facing a problem with the usage of "GET PARAMETER ID" in the transaction O4K_LICENSE (IS-oil).
I have written a BDC which feeds in the License Type, External License type and a few other Mandatory fields to the Transaction, and on saving the transaction, SAP generates an "Internal License Number". This field has a Parameter ID "OIH", and I am using the command
GET PARAMETER ID 'OIH' FIELD lw_licin.
For the first pass of the loop, there is a value coming into lw_licin, but in the later loops this Value is not refreshing and the value which is coming into lw_licin is not changing. But the Database table OIHL is getting updated with the correct Internal License number values.
So, my question is, is there anyway by which i can refresh the SAP Global Memory after every loop pass?
Or, is there any way out to get the new generated values into lw_licin ?
Thanks in advance,
Vijay.

Hi
If you clear the parameter, you should transfer a blank value to it:
DATA: NO_VALUE.
SET PARAMETER ID <ID> FIELD NO_VALUE.
Now the problem is this statament should be into loop and i think the transaction only does the GET PARAMETER.
If transaction doesn't do the SET PARAMETER yuo can do anything.
In your standard program there should be something like:
LOOP...
IF SY-TABIX > 1.
SET PARAMETER ID <ID> FIELD NO_VALUE.
ENDIF.
ENDLOOP.
but I think it's very hard there is a piece of code like that, and you can do nothing, because you can only set the parameter before calling the transaction (in bdc mode) and after calling the transaction but not while the transaction is working.
You should change the standard program to do this.
Max
Message was edited by: max bianchi

Problem with Warning Message in Financial Transactions eg. F-02

Hello Experts,
I have implemented a BTE - SAMPLE_INTERFACE_00001025 as a Z_SAMPLE_INTERFACE_00001025 for Account related transactions say for eg. F-02.
I had to implement 2 scenarios :
1) In which system should display Error Message and stop the user to post FI transaction.
2) In which system displays a Warning message but allows the user to continue with the posting of FI transaction.
The Error message worked successfully as it halted the transaction. But the warning message is not appearing. System is directly posting the FI transaction without showing any warning message.
I also tried using a status message, but it did not work. Neither did Information message work.
Here is what I have used,
I have created a Message class zbudget in which I have specified the messages.
Message E000(zbudget) with var1 var2 var3. ............. This is working successfully.
Message W000(zbudget) with var1 var2 var3.............. This has failed.
Can you please help me out in this.

Yes, you are correct Deepak.
The warning message is getting overwritten by the final message "Document Number XXXX is posted in company code YYY".
Is there any way to display this warning message for some time limit. I tried to use Wait for '2' seconds. But this also did not work.
Please help me out as I am not getting any workaround for this problem.
Thanks,
Danish.

HST60: Huge Performance Problem with VAPI Views

We are using a VAPI view (with instead-of-triggers) for a table with +/- 60 columns.
In this instead-of-trigger we call some functions to return constants and variables.
Using DML (for example a Update) on this view takes the Server 80 sec. CPU time.
Direct update on the table takes 0.2 secs. CPU time.
Assistance please cause we are planning to use VAPI views to populate a new database model with old Forms.
As I know in Oracle 7 there was a problem with code in triggers. I believe they were compiled each time they were called. And package onces !! MAybe has this something to do with it.
Thanks in advise,
M. Overdijk
null

Marc,
Thanks for the reply....
We are using 8.1.6 currently.
This is a problem of one my fellow developers. The problem is the update using the rowid. Headstart has a booster to customize a Designer module to not use this rowid.
Problem we have is we have a old Forms 4.5 application. We made a new server model along with cdm ruleframe. The old tables are dropped and the old forms now work with VAPI views......redericting the data the new tables.
Now we have (we think) the same problem wherefor Headstart has this above called booster.
Any solutions for us ??? Cause we don't want to change the old application forms (there are to much !!)
Our solution is to drop the instead of triggers and use some cev business rule to redirect the data...
Disadvantages:
1. some work to do
2. whern the old application is dropped we have to remove the cev rules.
Any other solutions

Problem with Mega View 561

I'm Italian. Sorry for my english; I hope to be comprensible.
I've just got a Mega View 561, but I had a problem with it.
Now it don't start anymore.
In the manual I read that there should be a restore CD-ROM in the package supplied with the Mega View, but i didn't find it.
I also didn't find a mail address able to connect directly the support in MSI, also in the Internet site.
Could someone help me in some way?
Thanks a lot

Bongiorno,
Try and look if what you need is here.
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=604&kind=6
If not:
[email protected]

Problem with Live View being slow

Since the latest update it now takes up to 20 seconds for the live view to appear in Dreamweaver. Is this usual - anyone else having this problem, How can I solve it? it's like working in mud!

It may just be a temporary issue on their server. That's one of the main problems with referencing files you don't own, you are at the mercy of the owner's server status.
If you can, I would suggest getting a copy of the font files you are using and keeping them on your own server to reference instead, it may cost you extra, but it's worth it.
To be honest, I've never used Typekit and don't even know if that's possible, but I've had similar issues with Google Fonts in the past and will download fonts to be stored on my own systems now whenever it's critical that they are available whenever the website is (doesn't happen often, but).
You just need both a .ttf and .otf version of the font to ensure it works when using the @font-face css rule. Converting a .ttf to .otf is pretty simple and can be done in a lot of places online. You would need to check with Typekit's user agreements to see if that's possible, but Google's are all open source and can be modified however you see fit.

Problem with a view in XK01 transaction

Similar Messages

Maybe you are looking for