Problem with ABAP Port Type

Hello Experts,
My problem is related to Idoc generation using ABAP Port Type.
In the creation of ABAP Port, one Z function module is assigned which has the code to generate another Idoc(MASTER_IDOC_DISTRIBUTE is used inside).
The problem is, I am able to create the first Idoc using this ABAP Port, and in the status, the first Idoc reached 03 with a message that this Idoc number reached the Zfunction module(which is assigned to port). But I'm unable to see the second Idoc generated. Even I am not sure whether this second Idoc generated or not.
Can you please explain how this ABAP Port type behaves, how to get this function module (which is assigned to port) into debugging mode and help me to solve this.
Regards
Sunil

Hello Radha,
Thankyou very much for your reply.
Even though we keep a break point inside the Function Module it will not come into debugging mode. It needs a different procedure.
I will explain again what my requirement is.
We have a port defined as ABAP Port (Not tRFC and not File Port ). While creating this ABAP Port it never asks for RFC destination, but it asks for a Function Module. So we have given that function module also. ( Basically this Function module creates Idocs using MASTER_IDOC_DISTRIBUTE afetr the original Idoc is created and sent to this port. )
So Initially we have generated one Idoc thru shipment which is sent to this ABAP Port. Immediately on reaching this port we got a message that this first Idoc reached this ABAP port and reached the Function Module. But we dont see any new Idocs created using this function module.
We used this Function module in a zprogram and created Idocs which means that the code in FM is working perfectly.
Now the problem is we are not sure whether the firstly created IDoc (on reaching the port) is triggering this Function module or not. We have checked WE02 if any new Idocs created after the initially created Idoc. But we found nothing. The one we created is the latest.
So can anybody explain how this function module (mandatory to give while creating ABAP port) gets triggered? And how can we get this FM in to debugging mode. Is there any link missing out there while defining ABAP port? Please explain.
Thanks you
Best Regards
Sunil

Similar Messages

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

ITunes Match: There was a problem with your payment type.

This Morning i received the following email from apple regarding my itunes match account.
I have no idea why this has happened, i am now worried of loosing all my music.
I have itunes match set for AUTORENEWAL, and there ist enough credit on my itunes store account.
Does anyone have an answer to this?
Would be greatful for help.
Thanks in advance
iTunes Match: There was a problem with your payment type.
There was a problem with your payment type that prevented the automatic renewal of your subscription to iTunes Match. To renew your subscription and to regain the ability to store your entire music collection on iCloud and enjoy it on your iOS devices, iTunes, and Apple TV, you will need to update your payment information. iTunes Match stores not only your songs purchased on the iTunes Store, but all of the other great music you have acquired over the years, including music from CDs.
To update your payment information or manage your subscription, sign in to iTunes on your computer and go to your Account Information page. Your matched and uploaded tracks will be removed from iCloud in 90 days, so renew your subscription now and keep all of your music in the cloud so you can listen to it anytime, anywhere.
Regards,
The iTunes Store team

I tried calling but they are closed in bservance of holiday. I want to resolve this issue now please via Internet so that I can resume my game. Thx very much for your help. Can u guide me thought this or email me the instructions as to how to resolve this step by step. It appears to me that there must have been a past billing issue.

I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

Reset the PRAM.
http://support.apple.com/kb/HT1379
If that fails, reset the PMU.
Scroll down the following page and click the G5 link for instructions:
http://support.apple.com/kb/ht1939

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem using logical port type "ABAP"

Hi, my problem is that I have to save a txt file with a certanly format who feeds from an IDOCs that is sended nowhere.
Instead of using a BADI the client wants that every time a PO is liberated an IDOC has to be triggered and it has to save that txt in a path, but that IDOC is not sended anywhere is just for saving the file. Dont ask why... they want to do this approach.
So I created a logical port of type ABAP, copy the function "OWN_FUNCTION" as a template and in my custom function I parse the IDOC and save the file... it works. My problem is that the IDOC is created when a PO is created but not triggered !!!
The IDOC is created with status 30 (ready to send).
What I need is that when the PO is saved the file has to be generated in the server but the function is not triggered. I try running the Program RSEOUT00 and the IDOC is not found (dont know why) the only way I can trigger the IDOC is via BD87.
Someone could help me, I dont know why the logical port type ABAP is not triggered. all my setting in WE20 is right.
Thx

The problem was in the WE20, the radio button was in mode 4 (collect IDOCs) instead of 2 (send inmediatly)

Problem with ABAP proxies - HTTP connection to R/3 is not working

Hi guys!
I'm setting up a connection from XI to R/3 , because I'm using proxy objects. Our DEV is working fine. Now I have moved the objects to QA and since the HTTP connection is not there, I need to set it up.
I have created a service user on R/3, activated ICF service on R/3 and created a HTTP to abap type connection in XI. When I test the connection I get a new logon screen. Why? I have provided information about logon user, client, ....
Thank you! Olian

Hi,
this logon screen populated when the RFC User ID is locaked. ask your basis team to release it.
also refer below links if in case of any other problem
Actiave ABAP Proxies -- /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Setting Up Point-to-Point Connections with proxy
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Thanks
Swarup

Problem with Dockingstation Type 2504 and R60 LAN Performance

Hello,
we have a smal problem with a lenovo dockingstation type 2504 and a r60 laptop.
Made some performance test for oure fileserver.
Found out, if i use dockingsstation, i get poor performance.
If i use the r60 without dockingstation, lan performance is realy good.
Some idea why?
How could it be?
Performance profile is max.
Use battrie in r60, dockingstation with power supply.
Big thanks

Ok, so I was able to video chat with Defcom last night by turning on my firewall and also by changing iChat/AIM to logon through port 334. I still cannot video chat with appleutest01. Any other ideas?

OBIEE-Answers Problems with NVARCHAR2 data type elements

Hello experts,
After we completed the .rpd development and ported to the real-time environment, when we try to create requests in Answers of Presentation services by selecting certain columns only and try to see results, we are getting an error if the columns are of NVARCHAR type. The error is given below.
This is stopping end users being not able to create any answers/requests. Please suggest how we can resolve this or if any specific things need to be done to solve the problem.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 87720170. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 24328, message: ORA-24328: illegal attribute value at OCI call OCIAttrSet. [nQSError: 17007] Error while executing OCIDefine routines. (HY000)

Hello Damon,
Thanks for the response.
We have also tried to query the same data through SQL*Plus and it went well. We had no issues with any data. Also the .RPD is working in our local system with the same data, on windows OS. But when we port the .RPD in the Server (Sun Solaris) we are having problems with the columns which are considered as NVARCHAR2 in the database and VARCHAR in the Physical layer of BI.
We observed there is no NVARCHAR2 data type supported in BI administrator in building the RPD. Is there any other datatype supports the NVARCHAR2 datatype in BI?
Thanks,
Narasimha

Headphone connection sporadic and must twist to get good connection; is there connection problems with connection port?

More times than not the headphone i purchased from Apple Store (Nike) and others do not get good connection in port of the nano so cannot play; if i twist it in the port it might hit and get sound but then can loose it with movement and/or get static; any history/problems with ports allowing good connections with headphones; it is surely fully pushed in; thanks

Thanks for the quick reply. The use of a heat gun to loosen the adhesive complicates matters, but your point about the 4G's unsoldered jack brings it back into the realm of a possible self-fix. I've read the notes by other users--some were successful with pipe cleaners or pressurized spray cans or both. I'll try that first before going for disassembly.
The first repair place that comes up when I Google "iPod repair" prominently features headphone jacks for the iPod Touch, suggesting it's a pretty popular item. Maybe the placement of the port, or even its angle, is a receptacle asking for trouble. If I get it to work again, I'm going to look for a leather, or folio, type of covering that doesn't leave that hole exposed.

Problems with USB port and song transferring;

Hi! I just got an iPod and I am having problems with it. My computer doesn't have a Hi-Speed USB port, even if it's 9 months old. Some of my friends don't have it either but they still are able to transfer songs onto their iPod. For mine, it keeps saying "Do Not Disconnect." I waited for 5 hours last time I got it and it still isn't working.
I also updated my iPod software today and the iPod icon isn't appearing on the bar to the left in iTunes. I'd really appreciate any help on this! As well as if I really need to do something about the ports or if it could function like this normally.

Quote from: Svet on 08-December-10, 00:48:07
Install chipset drivers from MSI web:
http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
+
NEC USB 3.0 Drivers:
http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
are these the same driver provided with the disc driver? as i already installed both of these..

Problem with setting oracle type parameter in viewobject query

Hi There,
I am facing a problem with JDev1013. I have a view that has JDBC positional parameters that are supposed to be in parameters for function like:
SELECT x.day, x.special_exact_period_only
FROM (
SELECT x.day, x.special_exact_period_only
FROM (
    SELECT
      x.day,
      rb.special_exact_period_only
FROM TABLE (
    RentabilityPkg.findMarkerSlots(
      'start',
      ? /* dchannel */,
      NULL,
      ? /* resorts */,
      'special',
      NULL,
      ? /* code */,
      NULL,
      TRUNC(SYSDATE),
      TRUNC(SYSDATE + 365 * 2),
      NULL
) x
    JOIN resourcebase rb USING (rentabilitymanager_id)
    UNION
    SELECT
      x.day,
      rb.special_exact_period_only
    FROM TABLE (
      RentabilityPkg.findMarkerSlots(
        'start',
        ? /* dchannel */,
        NULL,
        ? /* resorts */,
        'composition',
        NULL,
        ? /* code */,
        NULL,
        TRUNC(SYSDATE),
        TRUNC(SYSDATE + 365 * 2),
        NULL
    ) x
    JOIN resourcebase rb USING (rentabilitymanager_id)
)x
ORDER BY x.day
) x
WHERE ROWNUM <= 30now the JDBC positional parameters take our custom defined list type defined as:
CREATE TYPE NumberList AS TABLE OF NUMBER;
we are setting the parameter in the views with the help of oracle.sql.ARRAY class like:
   * Set parameters.
public void setParams(Integer dchannelId, Integer[] resorts, String specialCode)
    try {
          System.out.println(this.getClass() + ".setParams()");
          ARRAY arrParam1 = ((NWSApplicationModule)getApplicationModule()).toSQLNumberList(Arrays.asList(resorts));
          ARRAY arrParam2 = ((NWSApplicationModule)getApplicationModule()).toSQLNumberList(Arrays.asList(resorts));
          System.out.println("arrParam1 - " + arrParam1);
          System.out.println("arrParam1 - " + arrParam1);
          System.out.println(this.getClass() + " ARRAY - " + arrParam1.getArray());
          System.out.println(this.getClass() + " -- " + arrParam1.length());
          System.out.println("arrParam2 - " + arrParam2);
          System.out.println("arrParam2 - " + arrParam2);
          System.out.println(this.getClass() + " ARRAY - " + arrParam2.getArray());
          System.out.println(this.getClass() + " -- " + arrParam2.length());
          Object[] params =
               { dchannelId,
                    arrParam1,
                    specialCode,
                    dchannelId,
                    arrParam2,
                    specialCode
          setWhereClauseParams(params);
          System.out.println("DONE WITH " + this.getClass() + ".setParams()");
    catch(Exception ex)
          ex.printStackTrace(System.out);
}the toSQLNumberList() method is defined in our App module baseclass as follows:
public ARRAY toSQLNumberList(Collection coll)
       debug("toSQLNumberList()");
       DBTransaction txn = (DBTransaction)getTransaction();
       debug("txn - " + txn + " : " + txn.getClass());
       return NWSUtil.toSQLNumberList(coll, getConnection(txn));
public static ARRAY toSQLNumberList(Collection c, Connection connection)
    //printTrace();
    debug("toSQLNumberList()");
    try
      ArrayDescriptor numberList = ArrayDescriptor.createDescriptor("NUMBERLIST", connection);
      NUMBER[] elements = new NUMBER[c == null ? 0 : c.size()];
      if (elements.length > 0 )
        Iterator iter = c.iterator();
        for (int i = 0; iter.hasNext(); i++)
          elements[i] = new NUMBER(iter.next().toString());
      return new ARRAY(numberList, connection, elements);
    catch (Exception ex)
      ex.printStackTrace();
      return null;
protected Connection getConnection(DBTransaction dbTransaction)
    //return null;
    debug("Inside getConnection()");
    CallableStatement s = null;
    try
       * Getting Conenction in BC4J is dirty but its better
       * as otherwise we might end up coding with connections
       * and the Transaction Integrety will be
      s = dbTransaction.createCallableStatement("BEGIN NULL; END;", 0);
      debug("DOING s.getConnection()...");
      Connection conn = s.getConnection();
      debug("DONE WITH s.getConnection()...");
      /*try
            throw new Exception("TEST");
       catch (Exception ex)
            ex.printStackTrace(System.out);
      debug("conn CLASS - " + conn.getClass());
      return conn;
    catch (Exception ex)
      ex.printStackTrace();
      return null;
    finally
      try { s.close(); }
      catch (Exception ex) {}
}Whenever we try setting the parameters in view using setParams() and use this view to set the model of a java control it thorws the following exception :
[2006-10-10 12:34:48,797 AWT-EventQueue-0 ERROR] JBO-28302: Piggyback write error
oracle.jbo.PiggybackException: JBO-28302: Piggyback write error
     at oracle.jbo.common.PiggybackOutput.getPiggybackStream(PiggybackOutput.java:185)
     at oracle.jbo.common.JboServiceMessage.marshalRefs(JboServiceMessage.java:267)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:343)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:316)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2283)
     at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7509)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
     at oracle.jbo.server.remote.ejb.ServerApplicationModuleImpl.doMessage(ServerApplicationModuleImpl.java:79)
     at oracle.jbo.server.ejb.SessionBeanImpl.doMessage(SessionBeanImpl.java:474)
     at sun.reflect.GeneratedMethodAccessor7.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.StatefulSessionEJBObject.OC4J_invokeMethod(StatefulSessionEJBObject.java:840)
     at RemoteAMReservation_StatefulSessionBeanWrapper906.doMessage(RemoteAMReservation_StatefulSessionBeanWrapper906.java:286)
     at sun.reflect.GeneratedMethodAccessor63.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.io.NotSerializableException: oracle.jdbc.driver.T4CConnection
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1075)
     at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
     at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1341)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
     at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069)
     at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
     at oracle.jbo.common.SvcMsgResponseValues.writeObject(SvcMsgResponseValues.java:116)
     at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
     at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
     at oracle.jbo.common.PiggybackOutput.getPiggybackStream(PiggybackOutput.java:173)
     at oracle.jbo.common.JboServiceMessage.marshalRefs(JboServiceMessage.java:267)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:343)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:316)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2283)
     at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7509)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
     at oracle.jbo.server.remote.ejb.ServerApplicationModuleImpl.doMessage(ServerApplicationModuleImpl.java:79)
     at oracle.jbo.server.ejb.SessionBeanImpl.doMessage(SessionBeanImpl.java:474)
     at sun.reflect.GeneratedMethodAccessor7.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.StatefulSessionEJBObject.OC4J_invokeMethod(StatefulSessionEJBObject.java:840)
     at RemoteAMReservation_StatefulSessionBeanWrapper906.doMessage(RemoteAMReservation_StatefulSessionBeanWrapper906.java:286)
     at sun.reflect.GeneratedMethodAccessor63.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)This is a typical interaction between 2 server-side components (view-object and app module). Now the question is why is this exception thrown? Any answers?
This application is one that we have migrated from 904 to 1013 and are trying to get it running in 3-tier.
Regards,
Anupam

Sorry I missed out some semicolons, the script follws:
-- The following TABLE was created to simulate the issue
CREATE TABLE TEST_OBJECT
     ASSET_ID NUMBER,
     OBJECT_ID NUMBER,
     NAME VARCHAR2(50)
INSERT INTO TEST_OBJECT VALUES(1,1,'AAA');
INSERT INTO TEST_OBJECT VALUES(2,2,'BBB');
INSERT INTO TEST_OBJECT VALUES(3,3,'CCC');
COMMIT;
SELECT * FROM TEST_OBJECT;
-- The following TYPES was created to simulate the issue
CREATE OR REPLACE
TYPE DUTYRESULTOBJECTTAB AS TABLE OF DUTYRESULTOBJECT;
CREATE OR REPLACE
type DutyResultObject as object
( ASSET_ID number,
OBJECT_ID number,
NAME varchar2(150)
-- The following PACKAGE N FUNCTION was created to simulate the issue
CREATE OR REPLACE PACKAGE TESTOBJECTPKG
IS
     FUNCTION OBJECTSEARCH(P_RESOURCE IN NUMBERLIST) RETURN DUTYRESULTOBJECTTAB;
END;
CREATE OR REPLACE PACKAGE BODY TESTOBJECTPKG
IS
     FUNCTION OBJECTSEARCH(P_RESOURCE IN NUMBERLIST) RETURN DUTYRESULTOBJECTTAB
     IS
       BULKDUTYRESULTOBJECTTAB DUTYRESULTOBJECTTAB;
     BEGIN
       SELECT DUTYRESULTOBJECT(ASSET_ID, OBJECT_ID, NAME)
       BULK COLLECT INTO BULKDUTYRESULTOBJECTTAB
       FROM TEST_OBJECT;
       RETURN BULKDUTYRESULTOBJECTTAB;
     END;
END;
[\code]

Problem with item of type DB column, reinitialized in a process

Hello,
I have a problem with an item P216_username with source type=database column(empty in this case). In a process On Load-After Header(with a sequence number bigger then the Fetch Row sequence number) , I change the value of this item:
:P216_USERNAME := 'custom_value';
When I run the page, I see the item P216_USERNAME with the value from the database column(empty), instead of attributed value from the process('custom_value').
Here is a copy of the page in a debug mode:
0.00: Session: Fetch session header information
0.00: ...Metadata: Fetch page attributes for application 107, page 216
0.00: Fetch session state from database
0.00: Branch point: BEFORE_HEADER
0.00: Fetch application meta data
0.01: Computation point: BEFORE_HEADER
0.01: Processing point: BEFORE_HEADER
0.01: Show page template header
0.01: Computation point: AFTER_HEADER
0.01: Processing point: AFTER_HEADER
0.01: ...Process "Fetch Row from CONSULTANT_ALLOCATION_PERIODS": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:CONSULTANT_ALLOCATION_PERIODS:P216_ALLOCATION_PERIOD_ID:ALLOCATION_PERIOD_ID
0.01: ...Process "Initialize Username": PLSQL (AFTER_HEADER) begin :P216_USERNAME := 'custom_value'; htp.p(:P216_USERNAME); end;
custom_value PrintLogout
0.01: Computation point: BEFORE_BOX_BODY
0.01: Processing point: BEFORE_BOX_BODY
0.01: Region: Edit Allocation Period
Edit Allocation Period Cancel
Create
0.02: Item: P216_ALLOCATION_PERIOD_ID HIDDEN
0.02: Item: P216_USERNAME TEXT
Username
0.02: Item: P216_START_DATE PICK_DATE_MM_DD_YYYY
Start Date
0.02: Item: P216_END_DATE PICK_DATE_MM_DD_YYYY
End Date
0.02: Item: P216_COMMENTS TEXTAREA
Comments
custom_value ''
0.02: Computation point: AFTER_BOX_BODY
0.02: Processing point: AFTER_BOX_BODY
0.02: Computation point: BEFORE_FOOTER
0.02: Processing point: BEFORE_FOOTER
0.02: Show page tempate footer
If you had this problem, or you know where it comes from, please answer.
Thank you.

Hi,
Tomáš : I noticed that if i change the Source Used to 'Only when current value in session state is null' it works but I dont think its a normal behaviour.
Scott: Thanks, it's working now with the post computation callculation attribute.
Thanx for answers,
Vastiana

If you're having problems with USB ports, read on...

i'm reading that alot of people on here are having problems with their front (or top) usb on their cases not working with their k7n2 boards. i have come across the correct solution to this problem in one of the posts (after having solved the problem on my own), however noone has posted the solution by itself on this forum so everyone can easily see it.
The trick is to make sure that pin 10 (at least on a K7n2 delta-L), the pin labeled USBOC (USB Open Connection), is wired to NOTHING. If the connector to your front usb ports is fused into one giant connector and it HAS a wire that will connect to this pin (labeled GND2 or Shield or something), CUT THAT WIRE. Pin 10 on JUSB2 (at least on a K7n2 delta-L) must be OPEN. If this pin IS connected to something (even if it is only GND), the motherboard will think something is connected to this usb port and you will get many unknown devices listed in your windows device manager and the rest of your usb ports may or may not work.
As a general rule of thumb, if a pin on a motherboard is labeled OC for "Open Connection" and you wire something to it, you're asking for trouble.
If you cannot understand this you should not be attempting to wire a motherboard in the first place.
Here is a picture to go along with this discussion. If you cannot see this picture, I am sorry for it has probably been removed from the place I posted it online as I cannot attach pictures physically to this post. If someone here has a way to permanently host this picture and post it to this thread permanently, that would be wonderful.
In summary: all usb ports/headers have only four pins associated with it (VCC, USB+, USB-, GND). If the connector (whether it's one big connector or individual sockets) to your front/top usb port has 5 sockets, don't connect the 5th socket to anything. That goes for any case/motherboard combination. This is what i'm talking about above. I have no idea why motherboard and case manufacturers have a 5th pin involved in any way on either the pin or socket side. It is not used for usb.
EDIT: I just noticed this has already been discussed in the trouble shooting guide in the above sticky post. oh well, now we have a pretty picture to go along with it (i hope).

:-D)Hello guys,
as promised I come back here to give the results of my tests... and I have to say that you saved my day (even if I had to open back 60 secured cases).
So the solution was the right one, when I unplugged the "ground" end of the front USB connector cable from the USBOC pin, those connectors finally worked as expected with USB 2.0 compliant devices.
So thank you really much for this very usefull information !
And even if maybe it's not only MSI's fault, I still believe that more information on those connectors in the user's manual would be really usefull (who knows what USBOC means except a few people and who could imagine that pluggin on it a "ground" cable would make it unserviceable ??). And who ever saw a user's manual bundled with a case ?? it's pretty unusual
Hope that someone at MSI will read that and take it into consideration, not for me (because now I'm aware) but for the thousands other consumers that will feel a little bit "annoyed" with that issue. I don't think that adding one line about it in user's manuals would be so much expensive
But I'm quite lucky myself... being able to understand and write english (even if I still have some progress to do ) gave me the possibility to find the solution... but a lot of my french fellows can't do that... and there's no french forum here... How can they do ? They rely on user's manual
Best regards,
Nicolas

Creation of client proxy for a WSDL with 2 port types??

Hi,
I am trying to consume an external web service from SAP - ECC6.0. The WSDL file has 2 porttype definitions - one for i/p and one for o/p
When I proceed with SE80 to create a client proxy, it asks me to select any one port type to generate the client proxy. If I select only the input port, it generates proxy for the input port alone.
In this scenario, how do I create proxies and configure logical ports, and call it from a single program to invoke the whole web servie with both i/p and o/p?
TIA,
Regards
Deepthi

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

Problem with ABAP Port Type

Similar Messages

Maybe you are looking for