Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Similar Messages

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

Error on MIGO with added new field that was not pass empty

Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
Munur

I send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM

KE5Z : UserExit or SAP Note for adding new fields in the report output

Hi,
I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
Order reason(AUGRU), Sales Document Type (AUART) fields.
Is there any UserExit or SAP Note available for this....
Thanks in advance,
fractal

Hi Fractal,
See if Note 92864 will help you.
Summary
Symptom
Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
Additional key words
KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
SUPPORTGUIDE 20010613143936 -
REPORTWRITER,
SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
Cause and prerequisites
The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
For Release 3.0F, you should ensure you have applied Note 62511 first.
Solution
To include a field in the actual line item report, proceed as follows:
Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
Then save and activate the structure.
Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line afield-no_out = 'X'. "<<<< insert Note 92864 .
You should note that the place where you insert the lines influences the position of the column in the report list.
To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
Cheers,
Vikram
Pls reward for helpful replies!!

Adding new field in the table for Output

Hi ,
I need to add a field catalogue as Payment method in the condition table for Output, but the payment method field does not exist in the table. Can this be done?
regards,
Ragu

Hi Refer below link on sdn for adding new Field
Adding New Field to Catalog
Adding New fields to field catalog

Adding new field in SC Account Assignment Screen (only for information)

Hi guys,
we have a requirement, to show additional fields within the account assignment screen. The contents should only be displayed as information for the user. It is not necessary, respectively not wanted to save this data within SRM or the Backend-System.
2 questions:
a) Is it necessary to expand the item-structure of the SC (INCL_EEW_PD_ITEM_CSF_SC) AND to expand the accounting structure (INCL_EEW_PD_ACC_CSF) for this fields?
b) Is it sufficient, that the INCL_EEW*-structures of the PO-/billing-document etc. are NOT expanded with the additional fields to avoid the saving? In OSS-Note 458591 it is mentioned, that it is necessary to expand the CI-COBL-structure within the Backend-System.
Thanks in advance with best regards.
Bernd
ps. We are using SRM 4.0.

Hi
We have done this several times, in our past previous SRM implemenatations.
a) Yes. You need to expand the item structure at the Shopping cart level to display your Custom fields in the We bapage. As Per OSS Note - 672960, you can see the details. For display purpose, at least these custom fields must be created in the standard include structures [e.g., INCL_EEW_PD_ACC_CSF, etc ].
b) Yes, no need to expand any other SAP Include structure, incase you don't want the field contents to be saved in backend system (incase of Purchase Order / Purchase Req).
Please see the follwoing links, which deal with the similar requirements, you have asked for in detail with code and other relevant details ->
Re: Item Field Appearing In Account Assignment Field
Re: Control Busniess Area Field in Account Assignment..
Re: Add new account assignment field
Re: Account assignment category not passed into Target Objects Badi
Re: Add customer fields in Shopping cart and purchase order
Re: Hiding CUF fields in SC Basic data
displaying custom fields on shopping cart
Custom Fields in Cost Assignment Tab
How to add the custom field in SRM EBP shopping cart?
Add customer fields in Shopping cart and purchase order
Hope this will definitely help. Do let me know, incase you face any issues.
Regards
- Atul

Adding new fields in the layout.

Hi gurus,
I have a requirement in which i need to change the layout of a report v.25 through transaction VOKF. Actually i have added one field VDATU in the table VBMTV and the fields of this table are getting displayed in the output but not all fields. so through the transaction VOKF a variant has been created with some fields and there is also option for additional fields addition. But the field which I have added new through append structure doesnt appear in the possible value fields.
So do anyone have any solution for this or if anyone has ever encountered this type of issue.
Thanks in advance.

I have added the field VDATU in the Structure VBMTV and the structure is active. This field is getting filled in the my Standard report and and is displayed only when change the layout after displaying the output.My requirement i need this field by default in the output.
Thanks in advance.

Adding new field in the TCode FBL3N

Hi folks,
          We want to add New filed (Vendor Name) in the final output of TCode FBL3N. We added field in the 'Change Layout' option in the application tool bar. Now the field is coming on to the output, but with no data. What to do to get data into the Vendor Name field in the output. My doubt is whether it is Functional Consultant's work (Configuration work) or Abaper's work....pls help me regarding this...Thanks in advance....
            Santosh.

Hi any answers to the above Question.
          Thanks,
          Santosh

Fields missing in SM30 after adding new fields to the table

Hi ABAPers,
I added a new field & marked another field as primary key in the table. Then I generated the table maintenance view for the table in SE55 and adjusted Database utility SE14.
When i saw the table in SM30. The number of fields in the overview screen of SM30 shows less field then existing in table. i.e in my table i have 10 fields(3 primary). in SM30 it shows only 5 fields(3 primary + 2 normal fields)
In SE51, the overview screen of the table show less fields in the field list..
I want all the fields in the Table maintenance overview screen. Please suggest me a way forward friends..
Note: the system is 4.0B.
Thanks...Suresh Kumar

Hi
You have to re-generate your dialog for SM30 by table maitenance generator.
- From Se11 go to table maitenance generator
- Choose update icon
- Set flags for NEW FIELD
- Go to expert
- Set flag to re-generate dynpro
Message was edited by: max bianchi

Adding new field to the page when the field source not available

Hi,
I have a requirement to add vendor_serial_number (manufacturer's serial number) to the page /oracle/apps/csi/instance/general/webui/InstanceDetailsPG. This column is available in mtl_serial_numbers_all_v table. I don't see any VO in that page has access to this. What is the best approach to add this field in the page.
Create a new VO with the query to get the vendor_serail_number based on the item_number, serial_number.
Attach the VO to the AM InstanceDetailsAM or create a new custom AM as we can't attach the new VO to the seeded AM.
Add a item to the page that gets the column value from this new VO.
Please suggest.
Thanks,
HC

1. Create the textfield item using personalization.
2. Create a View Object to get the field
3. Extend the InstanceDetailsCO and attach the VO to AM programatically in the extended CO.
Any suggestions.
Thanks,
HC

VA05 - SAPMV75A Adding new fields in the list

hi,
I want to add 2 new fields in VA05 -SAPMV75A list.In the open Sales order report I need to add 2 fields from table (KONV) -KBETR and KWERT.I found a note 350068..Is this correct one
Any body worked ...
Thanks,
fractal.

Hi Diego,
Here is mylogic to find the cost. For a particular order find the Doc. Condition value VBAK-KNUMV and go to table KONV to get the various price condition. The relevant price condition will be VPRS. For Cost per unit we need to use the field KBETR and for item Total Cost we need to use field KWERT.
Is this possible with this logic?
Thanks,
fractal

Error while adding new field in the Segment type thru WE31.

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 45B. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
Points will be rewarded
regards,
neslin.

Hi
You can create a new version. This will not create any problems. You might not be able to cancel the release because of upgrade.
Thanks
Vijay

Problem with adding output field in Bank Details(Infotype 0009)

Hi All,
I hav a criteria like, when i select a value for a field corresponding value should be displayed in input/output field just beside the selected field.
To make you understand the criteria more clearly.In infotype 0009 we hav Bank key.When we select a bank key corresponding Bank name is displayed just beside Bank key field.How to achieve that functionality.
Can anyone help please. Its urgent...
Thanks a lot...
Sandeep.

To make my question more clear.I have created a new field in bank details infotype.Similar to the field Bank key in 0009 Infotype.As soon as a select the Bank no through F4 functionality i want the Bank no no to be selected and at the same time i want Bank name to be displayed just beside this field.
In short with 1 selection i want both Bank no n Bank name to be selected.
If i hav ti write the code where should i write the code.I hav also created a structure .I presume i need to write a logic for this requirement.But i dont know where to write the logic.

Problem with adding user fields to user table

hi everyone,
i have written code to create user tables and some user fields to that table....
its working fine...
in the code i have some conditions like if the table is already created.. then it should execute the code written for creating table..?
udTables1 = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
 If udTables1.GetByKey("FA_MASTERDATA") Then
 udTables1 = Nothing
 Else
 udTables1.TableName = "FA_MASTERDATA"
 udTables1.TableDescription = "Fixed Assets Master Data"
 udTables1.TableType = SAPbobsCOM.BoUTBTableType.bott_MasterData
 ret2 = udTables1.Add()
System.Runtime.InteropServices.Marshal.ReleaseComObject(udTables1)
 udTables1 = Nothing
 GC.Collect()
 End If
but how to check the same condition for adding fields????
udfields1 = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
 '' 1st field
 udfields1.TableName = "FA_MASTERDATA"
 udfields1.Name = "Alias"
 udfields1.Description = "Alias"
 udfields1.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
 udfields1.EditSize = 20
'''how to write condition to check whether the field is already creatd or not????
 ret3 = udfields1.Add()
System.Runtime.InteropServices.Marshal.ReleaseComObject(udfields1)
 udfields1 = Nothing
 GC.Collect()

hi try this..
oUserFieldsMD = muc_ParentAddon.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
 '********Adding 1st Field
 If Not IsFieldExist("POR1", "PINo") Then
 oUserFieldsMD.TableName = "POR1"
 oUserFieldsMD.Name = "PINo"
 oUserFieldsMD.Description = "Purchase Indent No"
 oUserFieldsMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
 oUserFieldsMD.EditSize = 20
 lRetCode = oUserFieldsMD.Add
 If lRetCode <> 0 Then
 muc_ParentAddon.SBO_Company.GetLastError(lErrCode, sErrMsg)
 MsgBox(sErrMsg)
 Return False
 Exit Function
 Else
 Fields = True
 End If
 End If
 System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD)
Private Function IsFieldExist(ByVal as_TableName As String, ByVal as_FieldID As String) As Boolean
 Dim flag As Boolean
 Dim businessObject As SAPbobsCOM.Recordset
 Try
 businessObject = DirectCast(Me.muc_ParentAddon.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset), SAPbobsCOM.Recordset)
 businessObject.DoQuery(String.Concat(New String() {"Select * From CUFD Where TableId = '", as_TableName, "' AND AliasID='", as_FieldID, "'"}))
 If (businessObject.RecordCount > 0) Then
 flag = True
 Else
 flag = False
 End If
 Catch exception1 As Exception
 Me.muc_ParentAddon.SBO_Application.SetStatusBarMessage(exception1.Message, SAPbouiCOM.BoMessageTime.bmt_Short, True)
 End Try
 System.Runtime.InteropServices.Marshal.ReleaseComObject(businessObject)
 Return flag
 End Function
hope it helps

URGENT:: regarding adding new field in the info type0002

Hi,
I have added tax number in the 0002 info type through pm01 and CI include and then i creatad a sub module to calll the TAX NUMBER.
the added field is appearing in T588M table for that screen, but it is not appearing when i tryed to open a emploee that new field is not coming in the info type screen.
do i need to call this sub screen some where else.. if so please help wherei need to do what...
Please help on this...
Thanks suresh

Hi suresh,
You should also add the field into the screen through program MP .. 0002.
I advise you to add it from the P0002 structure which is the red dotted icon on the top part of screen maintenance screen.
Regards,
Dilek
P.S. Please reward if helpful

Problem with adding new field to the mass change screen in FBL5N

Similar Messages

Maybe you are looking for