Problem with Adobe Acrobat Pro XI after installation on Mac

I just installed Adobe Acrobat Pro XI on my Mac. My Mac has the correct version of OS and Safari yet I can not launch Adobe. When I launch it, an error box comes up and says a problem has been reported to Adobe. That's as far as it gets. Has anyone had this problem before?

Hi lsgahan,
Please try the following steps and let me know.
Delete all the files from following folders:
Library/Application Support/Adobe/SLStore
Library/Application Support/Adobe/SLCache
And, delete all files from following folder except cache.db
Library/Application Support/Adobe/Adobe PCD
Launch Acrobat and enter the serial number when prompted and check.
Regards,
Rave

Similar Messages

Problem with Adobe Acrobat Pro Extended version 9.3.4 reading Inventor 2009

I would like to be able to generate 3D PDF files from Autodesk Inventor CAD models (e.g. .iam files) using Adobe Acrobat Pro Extended. I am constrained to use Inventor 2009. When I originally installed Acrobat Pro Extended, I was able to make this work after installing the IMPORT3D update at:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4073
Recently (9/5/2010), I updated Acrobat Pro Extended to version 9.3.4. I believe that following that update, I lost the ability to read in Inventor 2009 files. Acrobat Pro Extended now gives the error messages:
"Exception has been raised" followed by:
"Acrobat could not open 'file' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
This is exactly what happened when I first installed Acrobat Pro extended and before I installed the IMPORT3D update mentioned above. I tried re-installing that update but now the installer gives the error message:
"No qualifying products found to apply this update."
Note that Inventor 2009 does allow one to "Save Copy As" to PDF format, but this just creates a 2D PDF snapshot of the current model view -- same for print to pdf.
I suppose one thing to try is removing Acrobat Pro Extended and then re-installing without the 9.3.4 update, but with the IMPORT3D update -- but if that is necessary, then I won't be able to take advantage of any further updates (e.g. security updates) to Acrobat, which seems like a bad situation.
Has anyone else had this problem? Or is it just me?

I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF. After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files. For example a .ipt file (part file) seemed to convert fine. I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked. Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default. In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

Have you opened Acrobat and gone to Help>Updates to get an updated install?

Problem installing Adobe Acrobat Pro 9

I have an HP Pavilion dvd6-3033 with Windows 7 Home Premium operating system. Some time ago I purchased and installed the Adobe Creative Suite 5 Web Premium system which included a disc with Adobe Acrobate Pro 9. Everything installed just fine. Recently my hard drive went bad and I had to install a new one. After reinstalling Windows 7 Home Premium I reinstalled the Creative Suite 5 just fine, but the Acrobat Pro 9 installation, after running for a while, produces Error 1311 (Source file not found: F:\Acrobat 9\Data1.cab Verify the file exists and that you can access it.) I checked the Acrobat9 folder on the installation disc and Data1.cab is there, but apparently the installer for some reason doesn't recognize it. Any suggestions on what to do?

use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Strange problem with Adobe Acrobat X (crash without a trace)

Hi,
I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
I've already tried to restart system after crash, it doesn't help - reinstall is required.
Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
Has anyone encountered a similar problem?
Acrobat version: 10.1.1
System info: Windows 7 64 bit

Hi Kelvin,
Please let me know what OS version you are using.
The error also shows OS requirements not met.
Futher please try the steps below :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

There is a problem with adobe acrobat reader please exit adobe acrobat reader and try again 101:101

I'm trying to access some web PDF files via SharePoint Application but i got this error message "there is a problem with adobe acrobat reader please exit adobe acrobat reader and try again 101:101"
my operating system is Win 7 and I'm using Adobe Acrobat Pro 11.0

I'm having the same problem. Only I have Windows XP and at the end of the error message it shows 103.103. Please let me know if and when you get an answer or remedy to this problem. Thanks!

There is a problem With Adobe Acrobat/Reader.

I have XP professional, IE 8, and Adobe Reader 9.3. When I try to open any pdf files from a web page I see the following error: "These is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again. "
Although, the web pdf rendering returns an error, I'm able to open pdf files locally.
Any assistance would be appreciated.
Thanks,
Mike

I had similar problems with Windows XP SP3 and Adobe Reader 9.3 and I uninstalled AR 9.3 and went to:
http://get.adobe.com/reader/otherversions/ and installed Adobe Reader 8.3. No problems after that. However,
ʇɐb ɹəuəllıʍ posted this reply to one of my earlier posts. So, I don't know what to think...
3. Feb 15, 2010 7:45 PM in response to: cbuzz1
Re: Can you help me access PDF files via Adobe Reader?
cbuzz1 wrote:
I just discovered that Internet Explorer 8 is not supported by Adobe Reader 9.3 or that they just don't interface properly.
Reader 9.3 works perfectly fine in IE8.

There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (0:104)

There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (0:104)
I keep getting that message when I try to open a PDF link from a webpage. When I open the Windows Task Manager under the Applications tab I do not see Adobe Acrobat/Reader listed at all.
How do I fix this problem?

I may as well answer my own question.
After typing "patch" and reading a few threads I found out how to fix it.
http://forums.adobe.com/message/4541936#4541936

There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)

Trying to open a streamed PDF in an IFRAME in Internet Explorer 9 on my Win7 64bit machine.
This results in the following dialog:
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)
The PDF is streamed (not read from disc) from a servlet in our Java WebSphere environment and the call looks like this:
https://intranetserver.com/myapplication/OpenDocumentServlet.pdf?documentToOpenID=1
The Servlet sets content-type header application/pdf and content-length and writes the bytes to the buffer.
Does the error dialog even come from Acrobat? When the dialog opens there is no active AcrReader process visible in task manager.
Please advise!
Meddelandet redigerades av: p b
Solved. Our IT dept. responsible for packaging and deployment repacked and redeployed 11.0.9. Unknown what changes were made to make it work.

I don't know what acrofix.exe is; can you explain?
Issue
Nothing happens when you launch Acrobat 30 days after installing a CS6 suite.
Solutions
Important: Perform the solutions below in order. Do not continue further if an earlier solution resolves the problem.
Solution1: Install the patch for Acrobat installed as part of a CS6 (Windows Only)
1.   Log in to your Windows computer as an Administrator.
2.   Click the following link to download the patch file:
Acrofix.zip
3.   When prompted "Do you want to open or save this file?,” click Open.
4.   Extract the file. The location varies depending on your operating system and the utility.
5.   Double-click the extracted Acrofix.exe to begin the execution.
6.   If the execution is successful, Command Prompt closes automatically.
7.   When the execution is complete, launch Acrobat.
or
Solution2: Install the patch for Acrobat installed as part of a CS6 using Command Prompt (Windows Only)
1. Run the Command Prompt as an Administrator.
2. Navigate to the location of the extracted hot fix in Solution 1 (Step 4).
3. Type Acrofix.exe to execute it.
4. If the execution is successful, Command Prompt shows Exit Code:0
5. When the execution is complete, launch Acrobat.
Solution 3: Reactivate Acrobat through another Suite product
I will try your cleaner, thanks
[private data removed]

Hi, So I'm having a problem with Adobe Acrobat 10

Hi,
So I'm having a problem with Adobe Acrobat 10. I have backed up adobe acrobat files and stored them on an external hard drive. When I attach the external hard drive to one laptop I can open the acrobat files just fine but when I try to open the files from the other laptop I get "Acrobat could not open "file.pdf" because it is either not a supported file type or because the file has been damaged (for example. it was sent as an email attachment and wasn't correctly decoded). To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF.
Both computers are Toshiba Portege laptops and both computers have Adobe Acrobat 10 Pro installed. I can open files fine from one but can not open the exact same files on the other. I find this very strange. Also, I can plug the external drive into my iMac and open the files fine from there and other different Windows computers. It appears the issue is just happening on the one laptop. Any ideas for a fix? Thanks.

For the specific laptop - consider doing a "repair" (under Acrobat's Help).
If that does not do it then consider uninstall-deactivate-reinstall-active.
Still no go? Try:
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
Be well...

Error: "There is a problem With Adobe Acrobat/Reader..." What is .MST file??

I get the following error message and I looked it up in the knowledge base, and there was a solution for fixing the error message. However, I have no idea what they are talking about. I have downloaded the Customization Wizard, but I have no clue what the following means:
A) Create a new transform
B) Open your previously created .mst file
I went into the C Drive and opened Program Files. I found the Adobe folder, but I couldn't find an .mst file anywhere. Am I completely lost??? Below is the knowledge base solution:
Error: "There is a problem With Adobe Acrobat/Reader..." when you view a PDF in a browser (Acrobat and Adobe Reader 8 on Windows)
Issue
When you try to view a PDF in Internet Explorer, you see the error message, "There is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again." When you click OK to the error, the PDF opens outside of the browser.
Reason
When you use the Adobe Customization Wizard to create a transform for Adobe Acrobat 8 or Adobe Reader 8, and you choose the option to "Make Acrobat the default viewer if both Acrobat and Reader are installed", or "Make Reader the default viewer if both Acrobat and Reader are installed", an error occurs if the computer does not have Acrobat or Reader already installed.
Solution
Create a new transform and re-deploy Acrobat or Adobe Reader.
Start the Adobe Customization Wizard 8.
Open your previously created .mst file.
Under Installation Options, select "Installer will decide which product will be the default".
Save the transform.
Re-deploy Acrobat or Adobe Reader.
Additional Information
When you create a transform in Adobe Customization Wizard 8, the installation options allow you to set the default viewer for PDF files. "Installer will decide which product will be the default" is the default setting and should be used when you are uncertain if the target machine has a version of Acrobat or Adobe Reader that won't be removed as part of the installation process. When installed silently using this option, Acrobat will always be configured as the default viewer.

I think you are headed down the wrong path. The Customization Wizard is what you use to push out Reader to several hundred computers. An MST is a package or transform file that is used to accomplish this task. Unless you are an IT person and are trying a deployment of Reader this solution does not fit your situation.

Cannot get C7280 to scan with Adobe Acrobat Pro 8.0. Can you help?

I know this may not be the right place to post this, but here goes. I'm using 10.5.2 along with Adobe Acrobat Pro 8.0, a HP C7280 AIO connected to network via wireless. The normal software I use is HP Scan Pro.
Here's my problem. When I try to scan from Acrobat it will either open the scan pro software, show acrobat as the place to scan to in the bottom, but not do anything. If I "accept", it crashes Acrobat OR it will say it can't communicate, so either way it doesn't work. Any ideas how to make this work?
Thx

*"I know this may not be the right place to post this,"*
Try the Adobe forums: http://www.adobeforums.com

Can't open pdf created with Adobe Acrobat Pro

I can't open a pdf (that was created with Adobe Acrobat Pro) using Reader 11. However, the file will open with an older version of Reader (10.1.4) on another workstation. Is there any way to resolve the problem?

Reader 11 is not available for general release. If you participated in the beta program, there is a place for this discussion which you have been provided. If you did not participate in the beta program, then you should not yet have access to Reader 11. I have just checked the Adobe website and it is not available to download from there.

"there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)

We are getting the following error "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)" and a gray screen appears (Image not viewable) with multiple users. We are using Adobe Reader XI (11.0.05) and (11.0.06). The current workaround is to log off the website and log back in. Once the user logs back in, the pdf will appear. However it occurs anywhere from 2-8 times in a day. Anyone else having this issue or know of another workaround? Any suggestion with how to fix? Please help!!

Hi Valerie,
Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?
Also, try this:-
Launch Adobe Reader/Acrobat.
From the menu, choose Edit -> preferences -> General
Uncheck the option for "Enable Protected Mode at startup"
Restart the Adobe Reader and web browser.
Regards,
Aadesh

Problem with Adobe Acrobat Pro XI after installation on Mac

Similar Messages

Maybe you are looking for