Problem with airport g4 desktop

i can't turn on my airport on my computer.  I put in the original airport card into my g4 desktop running leapord 10.5 put i can't connect to the internet.  I go into network and make a airport section but i click airport on but it keeps turning off.  I just don't know how to fix it.

You might want to power down the G4,  unplug the Airport card, then re-start the machine to "clear" its knowledge of your Airport card. Then shut it down again, be sure the antenna is properly connected to the Airport card, and carefully plug the Airport card back in, making sure it's seated properly.  Finally, when you restart the machine and go to the Network system preference panel, be sure to press the Apply button when the G4 detects the "new" Airport interface.

Similar Messages

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

  • HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

    why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
    please advise
    Michaelgfrommet

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Problem with Airport express N (2nd gen)

    Problem with Airport express N (2nd gen)
    Firmware 7.6.4
    ISP - 20 Mbps ethernet cable
    I have MacBook Air 13 mid 2013 os x 10.9.5, ipad 4 ios 8.0.2, ipad4 ios 7.1.2 , iphone 5 ios 7.1.1
    When i try to use speedtest.net from my Macbook i got good results of download speed and incredible upload http://www.speedtest.net/my-result/3801286946 (connection 300 Mbps) , both ipads got terrible speedtest download result and incredible uploadhttp://www.speedtest.net/my-result/i/981631804 (connection 150 Mbps), iphone 5 got bad download and great uploadhttp://www.speedtest.net/my-result/i/981695357.
    All these tests were done near airport express with really good signal and 5ghz. I tried to choose different channels, 802.11 mode, guest ssid, 5ghz ssid ...
    I think that something is wrong with my new airport express. Can anyone help me to solve this problem?
    ps sorry for my bad english

    As a last resort, try a factory default reset on the AirPort Express as follows:
    Power off the AirPort Express
    Wait a minute
    Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
    Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
    On an iPhone or iPad home screen....
    Tap Settings
    Tap WiFi
    Look for a heading of Setup a New AirPort Base Station. If it appears.....
    Tap on AirPort Express just below the heading to start the configuration process on the Express again
    If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

  • Extreme problems with airport and harddrive no pun intended. please help.

    okay experts, please help. i have a lacie brick 500gb external drive that i got yesterday. i attatched it to the airport and the drive showed up on the desktop fine and dandy. the problem was that no backup software would recognize that a hard drive was attatched. i was given some advice to format the hard disk for apple using disk utility. i did that and it finished formatting this morning. (i had to do all this by plugging the hard drive in directly to the computer's usb port, it wouldn't let me do it attatched to the airport) now the dilemma is that when i attatch it to the airport, the disk no longer even shows up on the desktop, or anywhere else. wen i go to airport utility, manual setup and disks, it shows the hard drive there, but nowhere else. i know it isn't a problem with the hard drive because when plugged in directly to the computer, everything works fine. can someone please give me a run through of the settings i need to have set? i'm quite sure it is correct. i am just frustrated beyond belief getting this hard drive to work via the airport. thank you very much guys and gals.
    wait....update
    okay. finally, it is on the desktop, but not how it should be. superduper or the lacie backup system still doesn't recognize it as a disk. when i plug in the h.d. to the computer usb port it shows up as an orange icon on the desktop and is recognized by the software. but when i plug it in via the airport it shows up on the desktop as a different icon, like a box and isn't recognized by the software. what on earth is going on?
    this is driving me mad.

    You need to make sure that your backup software supports Bonjour(network attached) devices. I use the mac backup program and it recognizes AEBSn disk devices.
    Can you copy a file manually from finder to the drive?

  • Is there a software problem with Airport Extremes?

    I recently bought a new 802.11ac next generation AE to replace my old generation AE mainly for the increased wifi speeds.  I have been having trouble though getting my proper wired speed using the router though.  I didn't have problems with the previous version in the past.  But now using the new one I get low speeds at times, but its not constant.  I have comcast and get 60 mbps speeds when hooked up straight to my PC. Using the AE, at times I get the same speeds, but usually now it drops all the way to like 12 mbps. I don't understand what it is, and thought about returning the AE but I have past my purchase time to return.  The other night I used speedtest.net and I got 12 mbps. So I unplugged the comcast modem and restarted everything and it went back up to 60 mbps.  But it seems to drop down to 12 constantly.  I tried the same process last night, and it did not return to 60 mbps, it stayed at 12.  So I still have my old AE, and hooked that up figuring I would not have the same issue.  Yet I totally did.  12 mbps again.  So is this some sort of software issue that is making this happen, I don't understand it.  I see people having trouble with WiFi speeds on here, but this is a wired connection.  I also thought I would test the wifi for the heck of it while I was getting 12 mbps wired through my AE.  So I used my phone connected to wifi and ran speedtest, and I got 23.  So how can my wifi speed get higher returns than my wired connection?  Can anyone help?
    Thanks,
    Eddie

    I'm having a similar issue. I have TWC turbo cable in Manhattan. I get 20Mbps download speed when I connect a Mac directly to the modem via ethernet. When I use the current gen AirPort Extreme, my internet speed gradually decreases to unusable. Less than 1Mbps. Websites timeout before loading. My LAN still works, but internet crawls. Doesn't matter if a device is wired directly to Airport or wirelessly connected - internet crawls, if I'm lucky.
    This is after weeks of things running perfectly with this airport. Over the past few days, I'm dying.
    I spent time with TWC to make sure it wasn't on their end. Reset the modem. Ran signal tests. Rebooted everything. It's not an issue on their end. As soon as I plug directly into their arris modem, I'm golden. 20Mbps download again.
    I hard reset my AirPort Extreme, and set it up as if it was brand new. But internet speeds still drop to slow to unusable when I'm going through AirPort Extreme.
    Had some luck getting speeds up to usable by specifying DNS servers from TWC in airport, but this was false hope. Overnight, internet speeds were back down to less than 1Mbps.
    Again, if I connect a mac directly to the modem, I'm getting 20Mbps speeds again, as I should.

  • MBP 5.1 I have a recent problem with airport connectivity. ethernet connection is working fine, but wifi has become extremely slow and bad functioning. signal is received, no problem with the wlan (my husband 's wifi with MBP is perfect) please help

    I have a MBP 5.1 with snow leopard 10.6.8. It has been working fine until few days ago, when it started to have different problems:
    1) airport is not working well. it is extremely slow, has difficulties in fully loading pages, looses connectivity, It is not browser related, behaves thesame in safari or firefox; it is not the router/wlan; my husband mbp wifi works fine (as it was mine...) and iphone wifi is also working fine. it sees the signal and different networks. , it is also very very slow in opening skype (after that, it is working ok) if  I connect via ethernet cable to the same router, everything works perfectly and with the correct speed.could it be a damaged airport card? a software problem/corruption? logic board? (I hope not, the computer is out of apple care now....)
    2) after a certain time (more than hours) of use, the trackpad is behaving strangly, increase sensitivity to touch, unwanted selection of folders, files and text or images in web pages when i move the cursor, the cursor jumping all over the places while writing, ecc I have the impression it starts doing that when I use heavily the CPU ( and the temperature goes up). Is this again a problem of the mother/logic board?
    I had recently serviced it since it was not booting properly, but except some permissions repaired, they did noit find anything wrong in the hard drive (which I have  now substituted with a SSD) or other hardware.
    thanks in advance for any help/suggestions
    alessandra

    I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
    the funny behaviour of the trackpad/cursor still persists. any suggestion???
    thanks again

  • HP Color Laserjet 3600 Printing Problems with Airport Extreme & JetDirect

    I have a HP Laserjet 3600n connected via ethernet cable to our Airport Extreme base station using the built-in JetDirect functionality of the printer. Prior to installing Snow Leopard we had no problems and every computer on the home network could see and print with full functionality on the printer.
    After installing Snow Leopard, it took a while but I got the printer working again with the same setup. Then we had a power outage and the printer was no longer visible on the network or in the airport settings. Again it took a while but I once again got it to work. But now it seems like it keeps falling off the network and the printer itself either shows an IP address of 0.0.0.0 or another random one. The IP address should be generated by DHCP by the airport.
    I don't know if this is a problem with Snow Leopard, the airport extreme, or the printer. The way I got it to work the last couple times no longer fixes the problem. Someone please help.
    Message was edited by: balistikboy

    I don't know if this is related, but...
    My MacBook Pro (Airport) has always been dicey connecting to an HP LaserJet 4000 on my wired LAN. Before Snow Leopard, I used AppleTalk rather than IP printing because it just worked.
    But Snow Leopard doesn't support AppleTalk any more, so I reinstalled the printer to connect via JetDirect (which supposedly provides more features). When it works, it works fine. But very often I get a message that it can't connect to the printer. The only thing I've found that fixes the problem is power-cycling the printer, which somehow enables queued jobs to print. Needless to say, this gets old.
    Is there some trick I'm missing?

  • Printing problem with Airport printer

    Hi,
    I am having problems getting my daughter's G4 Macbook to print with Airport Extreme. The history is:
    1. Set up my iMac, Airport Extreme, all well, both G4 and iMac fine over wireless.
    2. Added HP Photosmart 8150 to Airport. Worked fine for iMac
    3. Added it to Macbook, no go
    4. Discovered that I had not actually added it to Macbook. At some point in the past, to allow printing for my daughter we had done a direct USB connection for her, and it was that we were trying to print to. But, it was there via Bonjour as a third printer when I looked.
    5. Tested it from the MacBook. Graphic fine, but no text. However, v. pushed for time so no further testing.
    6. Daughter tested, no good
    7. Looked at all 3 printers on Macbook. 2 x USB (1 8150 plus one other from her University), plus the Bonjour 8150.
    8. Decided that installing the same printer twice might be a problem. So deleted all three.
    9. Now I can't install. When I go to add a printer the Macbook can't see any. Have downloaded drivers, but to no avail. Have tried as many combinations as I can in drop downs.
    Basic Airport connectivity for the G4 is fine - internet functions no problems, no dropped connection etc.
    Any thoughts? I am a Mac newcomer, ex PCs, pretty techno-literate.
    p.s. Have reset print queues etc

    Airport Extreme unit failed - replacement cured all problems

  • Problems with AirPort and WPA access point

    Okay, I have done quite a bit of research and I still cannot resolve my problem because of this, I am turning to this user community.
    Here is what I know as of right now:
    I am running Windows OS X 10.4.4 with AirPort Update 2005-001. My Access Point is a 3COM 8250.
    The AP is setup not to broadcast its SSID, to use WPA-TKIP (or in Apple terminology, WPA Personal) and the password is set to use alphanumeric.
    When I try to connect my PowerBook with the SSID name, WPA Personal and the correct password, I get the following error:
    The password you entered is not correct for the Airport network *******.
    To troubleshoot here are the test I have run and their outcomes:
    Test
    - Result
    Set the AP to completely open
    - Connected
    Set the AP to open, didn't broadcast the SSID
    - Connected
    Set the AP to WEP, broadcast the SSID
    - Connected
    Set the AP to WEP, didn't broadcast the SSID
    - Connected
    Set the AP to WPA & WEP, broadcast the SSID
    - WEP : Connected
    - WPA : Not Connected
    Set the AP to WPA & WEP, didn't broadcast SSID
    - WEP:Connected
    - WPA:Not Connected
    Set the AP to WPA only
    - Not Connected.
    Now, I should mention that when I was running 10.3.3 I could not connect either. The AP is running the newest firmware and I have three Windows XP SP2 laptops / workstations that can connect with no problems.
    I have tried to find a compatibility matrix on both 3COM's and Apple's websites to see if it might be a compatibility issue but I have not been able to find one on either site.
    Any help that anyone could provide would be greatly appreciate.
    Thanks in advance.
    17" PowerBook G4   Mac OS X (10.4.4)  

    Hello MisssAsh. Welcome to the Apple Discussions!
    It's always a good idea to do a complete power recycle when changing network configurations.
    Try the following, in order, checking for Internet access after each step, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, AirPort Express Base Station (AX), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • Problem with Creative Cloud Desktop app since update to Windows 8.1

    Hi, I have updated my desktop and laptop to Windows 8.1 over the past day, and have noticed a problem with the Creative Cloud Desktop app.
    Some menu items when I right-click on either the CC system tray icon, or click on the Settings menu icon in the app interface itself do not show.  I've included a screenshot of the problem.
    I have tried uninstalling and reinstalling the desktop app, but this has not worked.  Any ideas?

    I am experiencing issues similar to the post above, with smaller floating windows but no dialouge. I uninstalled creative cloud desktop then re-installed- Issue is partly fixed, but now I get this:
    My system build:
    CPU:           Intel Core i7-3770 (Ivy Bridge-DT, E1)
                   3400 MHz (34.00x100.0) @ 3900 MHz (39.00x100.0)
    Motherboard:   ASRock Z77 Extreme6
    Chipset:       Intel Z77 (Panther Point DH)
    Memory:        16384 MBytes @ 666 MHz, 9.0-9-9-24
                   - 8192 MB PC19200 DDR3 SDRAM - G Skill F3-2400C10-8GTX
                   - 8192 MB PC19200 DDR3 SDRAM - G Skill F3-2400C10-8GTX
    Graphics:      Intel Ivy Bridge-DT GT2 - Integrated Graphics Controller [E1/L1/N0/P0] [ASRock]
                   Intel HD Graphics 4000, 2112 MB
    Graphics:      GIGABYTE GeForce GTX 660 Ti
                   NVIDIA GeForce GTX 660 Ti, 3072 MB GDDR5 SDRAM
    Drive:         SanDisk SDSSDHP128G, 125.0 GB, Serial ATA 6Gb/s @ 6Gb/s
    Drive:         Corsair Force GT, 117.2 GB, Serial ATA 6Gb/s @ 6Gb/s
    Drive:         SAMSUNG HD204UI, 1953.5 GB, Serial ATA 3Gb/s
    Sound:         Intel Panther Point PCH - High Definition Audio Controller [C1]
    Sound:         NVIDIA GK104 - High Definition Audio Controller
    OS:            Microsoft Windows 8.1  (x64) Build 9600

  • Problem with Digital Cinema Desktop Preview on Macbook Pro

    I hava a Macbook Pro 2.2 GHz with 2 GB RAM. I would like to use a connected 24"-Display for preview of my HD-Material (ProRes and HDV). Unfortunately I am not getting my Macbook Pro to playback all frames. Whend Digital Cinema Desktop Preview is activated, there are only still frames displayed. No smooth playing back neither in the canvas window nor the 24" display. I have External Video -> All Frames checked.
    Does the Macbook Pro 2.2 not meet the specs for this feature?
    Or is it a problem with Leopard? Is anyone with Tiger able using Digital Cinema Desktop Preview with succes?
    Regards,
    Joerg

    So are you saying that the DVI output on my MacBook Pro IS true HD resolution and not a proxy like the canvas?
    What I am saying is that the video feed coming out of the DVI port is YUV. Computer monitors take that YUV information and convert it to RGB for displaying purposes. So if you connect an Apple monitor to the DVI port, and then use that for Digital Cinema Preview, you are seeing a converted proxie image. The MXO takes the actual YUV footage and outputs that to the Apple display as YUV, and therefore presents full quality broadcast colors. And it does it pixel for pixel...the 23" display is 1920x1200, so there are thin black lines on the top and bottom.
    AND the MXO software has a proc amp for adjusting color bars, and a BLUE ONLY option for proper monitor calibration. THis really is an amazing little box.
    I'm using a Dell ultrasharp 20" that looks very good that way; I just didn't think it was HD.
    It is, but it is a converted RGB image...and since it is 20", it isn't pixel for pixel (well, it would be for 720p, not 1080), and if it isn't pixel for pixel, then it is a converted image. Not suitable for color correction.
    then using a DVI to HDMI cable I should be seeing HD from my Sony bravia also?
    Yup...sure can. It will look pretty good too. But it being a consumer set, and again having a YUV>RGB converted image, it won't look as good as it could. The MXO would feed it a proper YUV signal, as would an Decklink HDP (but you need a decklink card with SDI out for that).
    Shane

  • PROBLEM WITH AIRPORT

    OK so if anyone could help me... i have a macbook only 1 year old and i am at a friends house and for some reason i cant connect to the internet...well it conects but its shows the airport light is yellow. i have no problem connecting at my house wirelessly until the last week when it would come in and out once a day and it would take like 10 min to connect but then it would work.
    so if anyone could help me please let me know if anyone has any ideas.
    PLEASE
    -JOE

    My Computer has no problem with my airport but my bro arrived from os and cant join my wireless network , it asks for a password . How do I find what my password is if I need one? We clicked on join network but it says theres a problem joining network ..It finds the network ok but wont join .. can you suggest anything cheers in advance
    Powerbook G4 17 1.5Ghz   Mac OS X (10.3.9)  

  • Skype problems with Airport Extreme after update

    I use Skype to call regular phones and landlines. For over a year now it has worked well with my Airport Extreme, however, I noticed that around the same time I updated my Airport utility to 5.5.2 and Mac OS X update on 1/7/11 I am having problems with audio getting scrambled, the person on the other end dropping out, and my voice dropping out of their calls and the sound of me "being in a long tunnel," as they describe it. If I plug the ethernet directly into my computer there is no problem so I know it is the Airport base station.
    I have tried plugging and unplugging the base station and I had comcast reset my cable modem but nothing seems to be working. I have 12 mbps internet so I know it is not a bandwidth problem.
    Please help! Thank you!

    Indeed I have the same problem.  I ended up buying a new router because I thought mine was malfunctioning.  After buying the latest generation Airport Extreme, turns out it's having the same problem.  I agree that it was not a problem until 5.5.2.  Also, I use YouSendIt constantly and it also chokes the Airport Extreme.  It appears to happen in scenarios of high bandwidth usage.
    5.5.3 maybe coming soon?

  • Timecapsule and iMac Early 2008 - Problems with Airport Utility

    I have bought a new iMac and a TimeCapsule. With *Leopard 10.5.5* i have some problems to change the configuration. The Assistant will not work. The changed settings will not send to theTime Capsule (Ethernet or and Wireless). The airport signal is _very low_ under OSX (-60 — -64 dB). When I use airport with Windows XP on Bootcamp partition it will work fine. No problems with changing settings and the signal is -1 db.
    Who has the same problems or can help me!

    Do the black bars drop also at these times?
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712

Maybe you are looking for

  • Audio problems with iDVD

    My problem is that the audio ( soundtrack and added music)quits half way through the burned dvd. It is fine when viewing it in iDVD.

  • How do I get rid of an error message that comes up on opening the Photoshop Elements 8 Organizer?

    When I double-click on the Adobe Photoshop Elements 8 desktop icon, an error messsage appears. The title line says: OWL ORPHANAGE: PhotoshopElementsEditor.exe - System Error Then the message ; The program can't start because CoreFoundation.dll is mis

  • JAXB unmarshalling elements with xs:type explicitly set

    I am working with XML content where the XSD defines an element as being of a complexType (say "ParentType") but the content explicitly sets the element's xs:type attribute to an extension of that complexType (say "ChildType"). As far as I can tell th

  • How to change the SAP Standard DCs

    Hi Experts,                I have to change the particular ESS Address view like enable and disable the property.SAP enable & disable the fields dynmically in DCs.How can I change the SAP standred DC?.... Please advice me........, Thanks.

  • EOIO for Idoc to HTTP

    All - can anyone tell me how to ensure EOIO processing in the Integration Engine (PI 7.0 SP16)? We have queue serialization on and the idocs appear to be coming into PI in the correct sequence but when the process and I check them in SXMB_MONI they a