Problem with audio jack iPad 4

Yo, i'm from México, last year (March 4 2013) My mom gave me an iPad 4 has a birthday present from march to august anything was cool.
But on august i was on the school and i just unplugged my headphones, then 1 hour later i plugged them and only one headphone was working, i told to a friend of mine if i can test them on his phone and they were working, then i tried plugging any ear/headphones in my iPad 4 and still just working Left one.
What do i do? i tried looking for the jack here on mexico and it's just unavailable, just for iPad 3.
There's any solution?
Thanks for reading.

Make sure you are plugging them in all the way.
If you have a case, make sure the case is not blocking the port.
Inspect the port, make sure it is free of lint or any debris.
Try getting some compressed air and blowing out the port.

Similar Messages

  • External Speaker Static: Problem with audio jack?

    I don't believe that anyone on the forums had the same question. 
    I am having trouble with my macbook pro.  Whenever I plug in external speakers, I get bad static (very loud, about as loud as the speaker's audio itself).  I have tested this on multiple speakers and get the same results on all of them.  When used on another computer, the speakers work fine.  This suggests that it is something wrong with my audio jack for my mac. 
    I noticed that the 3.5 mm plug doesn't go all the way into the jack.  There is about a millimeter millimeter or two of space This isn't much, but may be resulting in the static.  I have tried forcing the plug all the way in, but it still does not go in.  Any ideas?
    I am trying to avoid having to get a bluetooth speaker or anything wireless. 

    Headphones don't induce grounding problems like external speakers. I am guessing the external speakers were all amplified speakers, with built-in amps and some sort of mains power supply. Perhaps you also have some peripherals such as a display connected to the Macbook Pro.
    Try this: disconnect all peripherals from the MBP (including the Magsafe power plug) except the external speakers and see if you get static. I will also guess that the static is more of a whine/buzz that changes whenever the computer does something different.
    If this works, then you have a common ground problem. The cheapest way to solve this is a Radio Shack ground loop isolator on the speaker cable,
    http://www.radioshack.com/product/index.jsp?productId=2062214
    High fidelity versions are also available, more like $300USD.

  • Having problems with audio jacks, connections are shorting. i need an alternative solution for mixing in logic

    i am having problems with mac pros audio jacks,any alternative solutions ?

    If you're mixing in Logic, buy a FireWire audio interface. So many people make them, that it isn't funny. Personally, I'm a fan of M-Audio interfaces for a cheap, high quality device.
    Here's some FireWire interfaces, they also make USB products.
    http://m-audio.com/index.php?do=products.family&ID=FWinterfaces

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Problems with the new iPad and Joikuspot premium after iOS 6

    Hi,
    I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
    Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
    I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
    Finally the problem is 100% due to the iPad and the new iOS.
    disappointing, amateur for such a device... (iPad I mean).
    Any help?
    Many many thanks
    Vittorio

    Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
    vorrei ritornare a IOS 5

  • Problem with audio configuration

    when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

    I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
    instructions at: http://docs.info.apple.com/article.html?artnum=93698
    Thanks giterdone

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • Hy, I have a problem with a new iPad Mini.

    Hy, I have a problem with a new iPad Mini.
    When I try to use the cameras, it doesn't work.
    I get to take 3-4 pictures and after that all I see is the shutter.
    It happends even if just start the camera app, or the facetime app, after 4-5s.
    I've reinstalled IOS 6.1 but nothing changed.
    It is a new ipad. What can I do?

    Ok, Orange Romania changed my iPad mini but now I have another problem.
    I bought the iPad mini on 01/feb/2013, took it to service on 06/feb/2013, and got another ipad mini on 12/feb/2013.
    But the new ipad mini keeps requesting the password for some user [email protected], and it does it from the first day of activation. This is suspect for me, so I checked it's serial with selfsolve.apple.com and it shows "Estimated Expiration Date: January 31, 2014" and since it has one year free service I am worried the iPad mini wasn't new.
    Please help.

  • Two problems with audio clips

    Hello,
    I'm having two problems with audio clips:
    1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
    2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
    What am I doing wrong?
    Thanks.

    1. Drag the little hand on speaker icon to drag from
    the Viewer...
    Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
    2. It means your sequence settings don't match the
    properties of the source audio you're putting in it,
    and you either need to change the settings in the
    sequence, or render the audio.
    Ah, that would explain it. Thanks!

  • I am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    i am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?

    Further info - I changed my security settings to allow apps from anywhere, and again tried to install.  I again got an error message
    that the update failed to install, and to contact Customer Support.

  • Premiere pro cc 2014 problems with audio

    I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
    Anyone else experience the same problems?

    Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

  • I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button)

    I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button). Anyone out there can help. Thanks.

    I have a 64GB iPad Air WiFi+Cellular (Verizon), and I don't see the issues you are describing.  First I would suggest that you update your iPad to the newest iOS update.  If that doesn't help, then you may want to schedule an appointment at an Apple Genius Bar.  If you go this route, I suggest that you let the iPad sleep for long enough for the problem to arise before you go to your appointment.

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • Can't run itunes because it has detected a problem with audio configuration

    What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

    Some people have found the following works:
    Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
    http://docs.info.apple.com/article.html?artnum=93698
    Turn off antivirus/anti spyware
    Go to Control Panel>Add/Remove Programs>Change or Remove Programs
    Select iTunes, then click on Change, then select Repair.
    Restart computer

  • Problems with Audio in iPhone 5

    I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

    Do you have the side switch enabled - do you see orange on the switch above the volume keys.
    Make sure all your settings are turned up.
    Try a restart of the phone by holding the home and power button until it reboots
    If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

Maybe you are looking for

  • Error while doing settlement from WBS to P&L Account

    Hello I am trying to do a settlement from WBS to P&L Account(Expense account). In this case, "Dummy" Prof Ctr is getting derived from 0KE5 (we have maintained a dummy prof ctr). We have set the validations to disallow any postings/settlements to dumm

  • How to add new fields to standard alv report

    Hi, Tcode(VL10G) .ie.out put list will not showing one new field.I want to add one more field to output list. append the field(VIKP-SDABW) In the SHP_VL10_ITEM structure .And write the logic in the exit LV50R_VIEWG05---- >USEREXIT_PREPARE_LAYOUT_FILL

  • FI Table for Partner Profit Center

    Dear Friends, My client has requested for an FI report showing the Partner Profit Centers. The report needs to reflect the profit center & its partner profit center with respect to the GL account. I presume an ABAP logic has to be written for this re

  • Opatch error with IBM AIX6.1 when upgrade from r12.1.1 to r12.1.2

    I'm running E-Business Suite (Oracle Financials AR, AP and GL modules only) r12.1.1 on AIX 6.1. I clean install r12.1.1 from rapidwiz. I'm running one Apps tier and one database tier. Now I perform the upgrade to r12.1.2, and I plan the route to be:

  • Multiple button groups

    Hey everyone I am writing a program that contains 2 button groups(of radio buttons) and I am try to set a different value of Height for every height, and either the gender of male or female. But i can't get the getActionCommand to work with it. I don