Problem with Back ground MRP Run (MDBT) or MD01

Hello SAP Experts,
Issue :- Material is not considering during Automatic back ground MRP run ( MDBT or MD01)
But when we run MRP in forground (MD02) system is considering the material.
we have checked both the selection parameter are same for MD01 and MD02 .
can you help us on this issue ?
Regards
Mahesh

Hi,
Problem is due to entry in Planing File is missing for that Material.
Go to MD21 and check whether Planing File entry is maintain for that Materiel.
If not then maintain it by T.code MD20 (Manual) or you can do it by using back Ground JOB - OMDU.
Regards,
Dhaval

Similar Messages

  • Problem with back ground job

    Hello experts,
    I have one background job which generates a text file and place it in a FTP folder.
    When one user runs this job its working fine. But,
    When two users run <b>the same background job at same time,</b> then i get trouble with my output file as the data is mixed up.
    How to avoid this!  Appreciate quick response.

    Have each run of the job create a unique file  OR  when a user starts a job, create a "marker" file that prevents all other runs of the same prg from executing until the marker file is deleted.
    The deletion of the marker file would need to be the last step of the prog then.  This would allow the second user to run the prog later (after the first user is done).

  • WorkFlow Back Ground Process Running More Time

    Hi all,
    I have very Big problem it is occured in production i need help vary urgent for this .
    Work flow Back Ground Process Running More than 5 hrs,actualy Daily it is running only below 2 min .but yesterday onwords it is running more than 5 hrs.but this workflow back ground process running long time only one item_type='REQAPPRV' REMAING item_types running normaly.
    i did have any root cause for this performance issue plz let me know any one for this problem what is the root cause.
    Thank's

    Reddy,
    Go through the following documents, it should be helpful in troubleshooting the issue.
    Note: 186361.1 - WF 2.x: Workflow Background Process Performance Troubleshooting Guide
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186361.1
    Note: 298550.1 - Troubleshooting Workflow Data Growth Issues
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=298550.1
    Note: 566577.1 - Workflow Background Process Has Significant Performance Issues
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566577.1
    Note: 743338.1 - Performance Degradation when the Workflow Background Process is Running
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=743338.1
    Note: 734425.1 - How To Generate Performance Trace for Workflow Background Process?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=734425.1
    If this is your production instance and the issue is urgent, I would suggest you log a SR.
    Regards,
    Hussein

  • Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  Any ideas?

    Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  I tried excluding different parts of the software from the back-up but it didn't make any difference.  I even tried exluding "invisible items" to no avail.  Any ideas?

    When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
    Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
    Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
    A full back-up on the iMac would be about 650 GB.  The partial updates that I have been trying start out at 115MB and keep growing indefinitely.  The original back-up never finished nor have any of the follow-up attempts.
    The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
    See A10 here.
    Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

  • Have problems with Mail on MacBook running OS X Mavericks. It suddenly became stuck: won't quit and won't display any messages. Please help.

    Have problems with Mail on MacBook running OS X Mavericks. It suddenly became stuck: won't quit and won't display any messages. Please help.

    Select Force Quit from under the Apple menu and select Mail (it may say that it isn't responding).
    Clinton

  • OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies

    Hello, i have problem with back up operating system from recovery cdies.
    When i acceped start button to backup partition system i get an alert "space not enough"
    I had linux before and i whant change it to windows back. i deleted all ext partitions. I have all unlocated space.I shouldnt have problems.
    Please help me

    I would use something like Partition Magic or Acronis Disk Director to first create a FAT32 partion for your C: Drive where your OS will go and be sure to leave 10GB or so unallocated for the secondary FAT32 Partition where your "factory image" will go. 
    You then create a Logical Drive with the unallocated space and make it hidden (PM or ADD will do this).   Install your OS (preferably Windows XP if you want less problems) and then after you have setup everything the way you want (drivers, applications, etc), then use Acronis True Image to create your "factory restore" image on the hidden partition and activate the Startup Recovery Manager.
    This is the way I do it and it works like a charm!

  • Program with Back Ground User.

    Hi ,
    In my development we are sending data from MDM to R3 through XI.
    Here iam having the following issue:
    When sending IDOC's from XI to R3, some of the IDOC's are struck in Queue  with status 64 and, those not going to be processed at all. This is because of the unavailability of the work processes at that time. All this is done through the back ground user XIS_REMOTE.
    Iam trying to process the unprocessed IDOC's through a standard program, all the IDOC's are processed, but the data created under the Fore Ground user (i.e. my id).
    <b>I want to know is there any possibility to run or write the program using back ground user XIS_REMOTE</b> <b>so that all the unprocessed IDOC's will process and get the back ground user XIS_REMOTE.</b>
    Any inputs appriciated.
    Best Regards
    Shyam Reddy.

    ST05 you can trace SQL-statements and get expainings how these statements are being worked upon by the database. this is more a tool for investigating the performance of abaps on your 'special' database.
    since you posted your request in the security forum i will assume that you want to do an authority trace. use tx. ST01 instead of ST05. Set the filter options to the program and/or user you want to trace and flag the areas you want traced like 'authority check' 'database access' 'kernel commands' ...
    activate the trace using the matchlight-icon. run the background job to be traced. stop the trace after a sufficient time (or until the job hits the error you want to investigate). then press 'evaluation' and check the boxes for the lines to be displayed again ...
    if both my answers don't fit to your problem come back here and state a bit more precisely what your problem is, maybe we find another approach to it.

  • Problem with Configuring Tomcat for running jsp web applications..Plz HELP

    I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
    to connect to the database. I have placed my project folder called
    tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
    a collection of html pages,jsp pages and images of my project. Also I created a
    WEB-INF folderand in that I have lib folder which contains catalina-root.jar
    , classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
    file which looks like this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!--
    Copyright 2004 The Apache Software Foundation
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    -->
    <web-app>
    <resource-ref>
    <description>Oracle Datasource example</description>
    <res-ref-name>jdbc/gdn</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    My Server.xml file in Tomcat\conf folder is as follows
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/gdn" auth="Container"
    type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
    url="jdbc:odbc:gdn"
    username="system" password="tiger" maxActive="20" maxIdle="10"
    maxWait="-1"/>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 5 documentation bundle for more detailed
    instructions):
    * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
    later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
         <!-- Note : To use gzip compression you could set the following properties :
                   compression="on"
                   compressionMinSize="2048"
                   noCompressionUserAgents="gozilla, traviata"
                   compressableMimeType="text/html,text/xml"
         -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector port="8443"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" disableUploadTimeout="true"
    acceptCount="100" scheme="https" secure="true"
    clientAuth="false" sslProtocol="TLS" />
    -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector port="8082"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" acceptCount="100" connectionTimeout="20000"
    proxyPort="80" disableUploadTimeout="true" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.4
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host
    Note: XML Schema validation will not work with Xerces 2.2.
    -->
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <!-- Defines a cluster for this node,
    By defining this element, means that every manager will be changed.
    So when running a cluster, only make sure that you have webapps in there
    that need to be clustered and remove the other ones.
    A cluster has the following parameters:
    className = the fully qualified name of the cluster class
    name = a descriptive name for your cluster, can be anything
    mcastAddr = the multicast address, has to be the same for all the nodes
    mcastPort = the multicast port, has to be the same for all the nodes
    mcastBindAddr = bind the multicast socket to a specific address
    mcastTTL = the multicast TTL if you want to limit your broadcast
    mcastSoTimeout = the multicast readtimeout
    mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
    mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
    tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
    tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
    in case of multiple ethernet cards.
    auto means that address becomes
    InetAddress.getLocalHost().getHostAddress()
    tcpListenPort = the tcp listen port
    tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
    has a wakup bug in java.nio. Set to 0 for no timeout
    printToScreen = true means that managers will also print to std.out
    expireSessionsOnShutdown = true means that
    useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
    false means to replicate the session after each request.
    false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
    <%
    HashMap map = (HashMap)session.getAttribute("map");
    map.put("key","value");
    %>
    replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
    * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
    * Synchronous means that the thread that executes the request, is also the
    thread the replicates the data to the other nodes, and will not return until all
    nodes have received the information.
    * Asynchronous means that there is a specific 'sender' thread for each cluster node,
    so the request thread will queue the replication request into a "smart" queue,
    and then return to the client.
    The "smart" queue is a queue where when a session is added to the queue, and the same session
    already exists in the queue from a previous request, that session will be replaced
    in the queue instead of replicating two requests. This almost never happens, unless there is a
    large network delay.
    -->
    <!--
    When configuring for clustering, you also add in a valve to catch all the requests
    coming in, at the end of the request, the session may or may not be replicated.
    A session is replicated if and only if all the conditions are met:
    1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
    2. a session exists (has been created)
    3. the request is not trapped by the "filter" attribute
    The filter attribute is to filter out requests that could not modify the session,
    hence we don't replicate the session after the end of this request.
    The filter is negative, ie, anything you put in the filter, you mean to filter out,
    ie, no replication will be done on requests that match one of the filters.
    The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
    filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
    ending with .gif and .js are intercepted.
    The deployer element can be used to deploy apps cluster wide.
    Currently the deployment only deploys/undeploys to working members in the cluster
    so no WARs are copied upons startup of a broken node.
    The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
    When a new war file is added the war gets deployed to the local instance,
    and then deployed to the other instances in the cluster.
    When a war file is deleted from the watchDir the war is undeployed locally
    and cluster wide
    -->
    <!--
    <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
    managerClassName="org.apache.catalina.cluster.session.DeltaManager"
    expireSessionsOnShutdown="false"
    useDirtyFlag="true"
    notifyListenersOnReplication="true">
    <Membership
    className="org.apache.catalina.cluster.mcast.McastService"
    mcastAddr="228.0.0.4"
    mcastPort="45564"
    mcastFrequency="500"
    mcastDropTime="3000"/>
    <Receiver
    className="org.apache.catalina.cluster.tcp.ReplicationListener"
    tcpListenAddress="auto"
    tcpListenPort="4001"
    tcpSelectorTimeout="100"
    tcpThreadCount="6"/>
    <Sender
    className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
    replicationMode="pooled"
    ackTimeout="15000"/>
    <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
    filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
    <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
    tempDir="/tmp/war-temp/"
    deployDir="/tmp/war-deploy/"
    watchDir="/tmp/war-listen/"
    watchEnabled="false"/>
    </Cluster>
    -->
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    This access log implementation is optimized for maximum performance,
    but is hardcoded to support only the "common" and "combined" patterns.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
    </Host>
    </Engine>
    </Service>
    </Server>
    I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
    My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
    in a browser. Here I accept a username and password from the user and then do the validation in
    a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
    accordingly. However when I enter the username and password and click Go in the homepage, nothing is
    displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
    WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
    WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
    IS IT POSSIBLE?WHY WILL THIS HAPPEN?
    I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
    Is there any other thing that I need to set in classpath? Should I have my project as a
    WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

    I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
    to connect to the database. I have placed my project folder called
    tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
    a collection of html pages,jsp pages and images of my project. Also I created a
    WEB-INF folderand in that I have lib folder which contains catalina-root.jar
    , classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
    file which looks like this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!--
    Copyright 2004 The Apache Software Foundation
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    -->
    <web-app>
    <resource-ref>
    <description>Oracle Datasource example</description>
    <res-ref-name>jdbc/gdn</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    My Server.xml file in Tomcat\conf folder is as follows
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/gdn" auth="Container"
    type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
    url="jdbc:odbc:gdn"
    username="system" password="tiger" maxActive="20" maxIdle="10"
    maxWait="-1"/>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 5 documentation bundle for more detailed
    instructions):
    * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
    later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
         <!-- Note : To use gzip compression you could set the following properties :
                   compression="on"
                   compressionMinSize="2048"
                   noCompressionUserAgents="gozilla, traviata"
                   compressableMimeType="text/html,text/xml"
         -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector port="8443"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" disableUploadTimeout="true"
    acceptCount="100" scheme="https" secure="true"
    clientAuth="false" sslProtocol="TLS" />
    -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector port="8082"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" acceptCount="100" connectionTimeout="20000"
    proxyPort="80" disableUploadTimeout="true" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.4
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host
    Note: XML Schema validation will not work with Xerces 2.2.
    -->
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <!-- Defines a cluster for this node,
    By defining this element, means that every manager will be changed.
    So when running a cluster, only make sure that you have webapps in there
    that need to be clustered and remove the other ones.
    A cluster has the following parameters:
    className = the fully qualified name of the cluster class
    name = a descriptive name for your cluster, can be anything
    mcastAddr = the multicast address, has to be the same for all the nodes
    mcastPort = the multicast port, has to be the same for all the nodes
    mcastBindAddr = bind the multicast socket to a specific address
    mcastTTL = the multicast TTL if you want to limit your broadcast
    mcastSoTimeout = the multicast readtimeout
    mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
    mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
    tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
    tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
    in case of multiple ethernet cards.
    auto means that address becomes
    InetAddress.getLocalHost().getHostAddress()
    tcpListenPort = the tcp listen port
    tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
    has a wakup bug in java.nio. Set to 0 for no timeout
    printToScreen = true means that managers will also print to std.out
    expireSessionsOnShutdown = true means that
    useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
    false means to replicate the session after each request.
    false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
    <%
    HashMap map = (HashMap)session.getAttribute("map");
    map.put("key","value");
    %>
    replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
    * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
    * Synchronous means that the thread that executes the request, is also the
    thread the replicates the data to the other nodes, and will not return until all
    nodes have received the information.
    * Asynchronous means that there is a specific 'sender' thread for each cluster node,
    so the request thread will queue the replication request into a "smart" queue,
    and then return to the client.
    The "smart" queue is a queue where when a session is added to the queue, and the same session
    already exists in the queue from a previous request, that session will be replaced
    in the queue instead of replicating two requests. This almost never happens, unless there is a
    large network delay.
    -->
    <!--
    When configuring for clustering, you also add in a valve to catch all the requests
    coming in, at the end of the request, the session may or may not be replicated.
    A session is replicated if and only if all the conditions are met:
    1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
    2. a session exists (has been created)
    3. the request is not trapped by the "filter" attribute
    The filter attribute is to filter out requests that could not modify the session,
    hence we don't replicate the session after the end of this request.
    The filter is negative, ie, anything you put in the filter, you mean to filter out,
    ie, no replication will be done on requests that match one of the filters.
    The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
    filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
    ending with .gif and .js are intercepted.
    The deployer element can be used to deploy apps cluster wide.
    Currently the deployment only deploys/undeploys to working members in the cluster
    so no WARs are copied upons startup of a broken node.
    The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
    When a new war file is added the war gets deployed to the local instance,
    and then deployed to the other instances in the cluster.
    When a war file is deleted from the watchDir the war is undeployed locally
    and cluster wide
    -->
    <!--
    <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
    managerClassName="org.apache.catalina.cluster.session.DeltaManager"
    expireSessionsOnShutdown="false"
    useDirtyFlag="true"
    notifyListenersOnReplication="true">
    <Membership
    className="org.apache.catalina.cluster.mcast.McastService"
    mcastAddr="228.0.0.4"
    mcastPort="45564"
    mcastFrequency="500"
    mcastDropTime="3000"/>
    <Receiver
    className="org.apache.catalina.cluster.tcp.ReplicationListener"
    tcpListenAddress="auto"
    tcpListenPort="4001"
    tcpSelectorTimeout="100"
    tcpThreadCount="6"/>
    <Sender
    className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
    replicationMode="pooled"
    ackTimeout="15000"/>
    <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
    filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
    <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
    tempDir="/tmp/war-temp/"
    deployDir="/tmp/war-deploy/"
    watchDir="/tmp/war-listen/"
    watchEnabled="false"/>
    </Cluster>
    -->
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    This access log implementation is optimized for maximum performance,
    but is hardcoded to support only the "common" and "combined" patterns.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
    </Host>
    </Engine>
    </Service>
    </Server>
    I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
    My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
    in a browser. Here I accept a username and password from the user and then do the validation in
    a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
    accordingly. However when I enter the username and password and click Go in the homepage, nothing is
    displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
    WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
    WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
    IS IT POSSIBLE?WHY WILL THIS HAPPEN?
    I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
    Is there any other thing that I need to set in classpath? Should I have my project as a
    WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

  • Back ground MRP

    For my client MRP is running in back ground
    When MRP is run planned orders is getting created against sales order. But for sales order from april 2001 no planned orders are getting created.
    Can any body help me on this

    Hi,
    For those sale orders check the schedule line category and for that scheduline categopry ,check in SPRO whether etransfer of requirements tick is there or not.
    path is SPRO-SD-basic functions-availability and transfer of requirements-define procedure for each shedule line category.
    Check and come back

  • I am having problems with an older ipod running 1.1.2 firmware trying to use earbuds with volume controls made for ipod. any suggestions?

    I am problems with an older Ipod classic running 1.1.2pc using earbuds with Ipod inline remote. The earbuds work fine with my new Ipod but not the older one. Any suggestions?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • Hard drive died - multiple problems with backed up home folder

    My friend called me when she started having some problems with her home iMac. After we did went through a myriad of troubleshooting items, I determined that her hard drive was failing and suggested she backup her home folder immediately to another drive. She copied her home folder over to her old Mac and took the iMac into the Apple Store for further diagnostics. Sure enough, her hard drive had failed and they replaced it for her.
    She reinstalled Leopard and set it up with a new account. We tried using the Migration Assistant to copy her old home folder back over but because she copied it rather than using Time Machine, Migration Assistant doesn't see it as a viable home folder. I'm very comfortable using the Terminal since I support both Macs and Linux in my department so I logged in as root and copied over her folders to the new account. That generally worked but we now have a ton of permissions problems of which Disk Utility doesn't fix. I'd like to start fresh again from her backed up home folder. So my question is if I can't use Migration Assistant to move over her old home folder, how do you make OS X see her old home folder as a viable account? (I hope this makes sense.)
    Thanks in advance!

    I would suggest the following.
    make a new temp admin account and get rid of the new account she made already. log in as the temp user and copy the old home folder from the external to /Users. then go to system preferences->accounts and make a new account with the same short user name as the name of her old home folder. It will say that a home directory by that name already exists and ask if you want to use it. say "yes". this should recreate that user and take care of all permissions issues.

  • Problem with backing file in weblogic portal

    Hi friends,
    Hope all are good. How to call the backing file methods,before begin method of jpf portlet of weblogic.
    Thanks,
    Ramanuja kolla.

    Serge, can you post this in weblogic.servlet.interest.portal? There is a
              chance portal gurus might be able to answer this query
              --Nagesh
              "Serge" <[email protected]> wrote in message
              news:403080b2$[email protected]..
              >
              > Hello.
              >
              > I am developing Portal Web application now using WebLogic Workshop 8.1
              with Service
              > Pack2 and I have a problem with Default Page in Portal.
              >
              > The problem is following: when I click on ANY link (even on Minimize or
              Maximize
              > in Portlet titlebar) on the page that is not default for my application,
              default
              > page is always shown. Why does it happen? Can you help me?
              

  • Problem with Back button in Top Level Navigation

    Hi all,
    We are facing a minor problem with the Back button in the Top Level Navigation in Portal. This button is present under the Roles and Worksets menu along with the History, Forward, and Add to Portal Favorites links.
    The problem is faced when we have some worksets under a single role. While browsing accross these worksets by randomly clicking on them, we wish to use the Back button as well to go back to the previous workset. But when we use the Back button, the Detailed Navigation panel in the last workset is not retrieved.
    I will explain with the System Administration Role. I open the worksets under this role in the following manner:
    First I open Transport;
    Next I open Portal Display;
    Next I open System Configuration;
    Now I wish to go back to Portal Display workset by clicking on the Back button. But when I do this, although the Portal Display workset opens up, but I cannot see the Detailed Navigation Panel. See the screenshot below:
    http://img399.imageshack.us/my.php?image=backbuttonkg6.jpg
    Please help me in solving this issue.
    Regards,
    Ankur

    I think I have found a resolution, although not very pleasant:
    [Note 950426 - Portal Back button not working correctly|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_pi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393530343236%7d]
    Regards,
    Ankur

  • Problem with "back" on Safari

    Hi,
    I´m having problem with my Safari.  When i hit back or swipe on my trackpad to go on the site i just browsed, the Safari diplays an older version of the site, usually 1-2 days older.  For example:  When browsing news sites i get 24 hrs old news :-) To fix this i have to refresh the page but that´s really annoying all the time.  I´ve seen this problem here on this community but no repair or sollution of this problem.
    Please help me, i don´t want to go to Chrome or something :-)
    Styrmir

    Hi, thanks for the effort but,
    i dont think we are talking about the same issue here, my english is maybe not so good(i´m in iceland)
    my pages load allright, but just old pages and sometimes this happens and sometimes not.  I restarted my notebook and deleted my cache and history and that fixed the problem(obviously, since there are no old pages to load in the memory). 
    But i´ve been reading here on support community and many have this problem but no fixes in sight.  I dont want to delete everything constantly, so this remains a mystery.
    styrmir

  • A problem with Yotube Videos that run on flash

    Yotube Videos that run on flash load for a while then stop loading permanently and the video freezes. Im not experiencing this problem with videos that don't have adds and use HTML5 .I have tried everything from reinstalling flash to removing cookies to trying other web browsers. please help.
    (note that bofor this problem happened i updated to the latest version of mountain lion)

    amad55 wrote:
    i just relised that the problem happens to videos that only have a (MACKEEPER) add , when different adds appear the videio works normaly and doesnt freez, what do i do ?
    Since you mention MacKeeper, I'd suggest taking a look at this thread: https://discussions.apple.com/thread/3952819

Maybe you are looking for

  • Error message in Flash CS6

    I'm getting an error in Flash CS6 when trying to add web address.:The following JavaScript error(s) occurred:  SyntaxError: missing ) after argument list. I've opened new job and clicked on Publish Settings and ticked 'Permit Debugging' as suggested

  • Property settings not working

    I have several property tags in my JNLP file, but when I launch my application I get the following error: java.security.AccessControlException: access denied (java.util.PropertyPermission stubMessage write) for each property I've included in the JNLP

  • Boot-up Disk Choice in in Yosemite Style (black background) instead of white

    I have a MacBook Pro Retina 15" Late 2013 currently running OS X Mavericks. Yesterday I installed OS X Yosemite on a partition of my external HDD to try it out, and everything went smoothly. After a while I rebooted Mavericks and deleted the partitio

  • Reinstalling CS5.5 Master Collection, Installation Failed

    I'm running Mac OSX Mavericks (10.9.3) Macbook Pro late 2012 Hi! I just yesterday reinstalled my computer's OS and restored files via backup, only to realize none of my applications survived the transition. Most of them are back now, with the excepti

  • Encrypted file deleted from edge servers

    when any user try to send encrypted files as attachment from internal to external edge server stripe the attachment. and there is no attachment filter entry for encrypted files in the attachmentfilterconfiguration.