Problem with blue color in Photoshop CS4 after calibrating monitor

Hi to all! I would appreciate if someone can help me!
Before some days I calibrated my monitor with Pantone Huey Pro and after that I find out that photoshop doesn't show blue color corectly. I create a blue (0,0,255) page and it looks a bit like violet, while I don't have any problems with red and green (which are perfect), or with other programs (other programs display blue and all colors correctly). But when I save this blue page and open it with a different program I see the real blue color. So the problem is that during editing in Photoshop blue color isn't correct, it's a bit violet.
Can anyone tell me why blue color doesn't behave properly in Photoshop? Is there any setting I should change in Photoshop Color Settings?
I use sRGB on my camera, and sRGB in Photoshop (North America General Purpose 2, sRGB IEC61966-2.1, U.S. Web coated (SWOP) v2, Dot Gain 20%, Dot Gain 20).
Thanks for your time!
George

Thanks for your quick responce!
I update Huey and Photoshop and did the calibration again but it didn't fix the problem. Is it possible that the calibrator doesn't work properly?
My monitor isn't very new, so I don't think it has wide gamut display.
When you say that "if your display is not truely sRGB" you mean that maybe the profile created Huey isn't correct? I have done many times the calibration and the result is always the same.
I think that Paintshop uses color management, too, shouldn't it display the same wrong blue color if Huey's profile is wrong?
How can I check if Huey works properly? Maybe I should try it on a different PC?
Thanks for your time!!!
Best regards,
George

Similar Messages

Acrobat 9 pro and problems with pdf made by photoshop cs4

Hello,
I have encountered a problem when viewing pdfs exported from photoshop cs4 using acrobat pro 9. If I open single pdf, it's ok, but whenever I open another pdf, all text is jagged. Then if I close all pdfs and try opening the second one, it's ok again. It looks like acrobat is not able to render texts correctly in newly opened pdf when another pdf is already opened.
This happens only with pdfs exported from photoshop (file->save as->pdf). It does not really matter if the first opened pdf is from photoshop or not, all other opened pdfs from photoshop are crapy.
I tried different settings when saving pdf but the results are always the same - jagged type (it does not even look like aliased, it's completely screwed and unreadable) in second pdf. It is funny because text present as smart object from illustrator renders fine all the time. Therefor I think the problem is between photoshop export and acrobat, vectors are rendered with no problems.
I tried opening on different pc (also with acrobat 9 pro) with the same result. Systems are vista on exporting pc, the second pc is running windows7 beta. However on the third pc with windows XP and adobe reader 9 everything works fine.
Any ideas how to make this work?
regards,
embee

Solution found for me. From Adobe Acrobat & Reader 9.1 Release Notes:
Roaming Profiles on Windows and Networked Home Directory on Macintosh
are not supported configurations for 9.0 or 9.1, however we have made
several fixes in 9.1. We are looking at the possibility of supporting
this for the next major release.
As I am working with roaming profiles, my current solution (which is no solution at all) is to wipe current and reinstall Acrobat/Reader 8. Among other things there are supposed console hacks to make the purchased Adobe software run at all in a group work environment. I will end up trying them later.
Some good reads are :
http://forums.adobe.com/thread/300660
http://forums.macrumors.com/showthread.php?t=198512
http://forums.adobe.com/thread/391738?start=150&tstart=0
http://serverfault.com/questions/37805/adobe-reader-wont-launch-when-logged-into-network-u ser-accounts-open-directory

Problem with auto install of Photoshop CS4

Hello,
I'v a problem with the installation of Adobe Photoshop CS4 under Windows 7. It's working
with Windows XP. I've a Exit code: 7 (Unable to complete the silent workflow). I use the
command Setup.exe --mode=silent or Setup.exe --mode=silent --skipProcessCheck=1 or the same commande
with de response file but always the same error code.
Can you help me to resolve my problem ?
Best regards

You should probably go to the PS Windows forum with this question...

Having problem with correct color using Photoshop Elements 9 and Hp photosmart c6150.

Have been trying to print pictures from PSE9 to HP Photosmart C6150 and the colors are overly red and not the same as the original photo. I tried to get the ICC profile online without any success. How do I setup my color management on PSE9 and my C6150 to get the best pictures. I am using HP Premium Plus Photot Paper.

Delete the editor's preferences: quit it, then restart it (use the button in the welcome screen or organizer) while holding down ctrl+alt+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do.

Cursor problems with new mac pro and cs4

I am having a major problem with my cursor in photoshop cs4 extended.
any tool i select as soon as i touch it to the canvas the tool turns to a black mac arrow cursor.
this is extremely annoying and makes brushing anything almost impossible as i can't see the edge of my brush because it turns to an arrow as i try to use it. (it starts out at the correct size before i actually brush with it)
i have my brush set as normal and precise tools are set but this problem happens with any brush and tool setting
I have tried turning off Open GL advanced redraw, all that.
I have the stock nvidia gt 120 - is it a video card problem? should i have gotten the ati 4870?
should i reinstall cs4?
my system is a base octo 2.26 with 6 GB ram - no scratch disk setup yet - waiting on the drives and more ram to come.
thanks all...

um...not to detract from the other users problem but mine has nothing to do with displacement of the cursor
i have uninstalled CS4 suite, reinstalled it, repaired permissions and deleted prefs.
I am still getting the arrow whenever I click the cursor with any tool to the canvas.
I am a pro p-shop retoucher - this is making CS4 essentially UNUSABLE - i will only be able to use CS3 and all this after I spent 600 for the "upgrade"?
I have to teach at a retouching seminar soon and i will have a very poor working knowledge of CS4 as a result
I can't find any similar complaints at nvidias site or on here
any help is still needed!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Problems with "no color" in the "Fill and Stroke"

I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

Have you updated flash to 10.0.2? Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect? I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters?

I recently tried to install Adobe CMM, as a pop-up window suggested after I installed Photoshop CS5 on a new computer, running Win7x64 Ultimate. Before trying to install CMM, my Akvis Sketch Plug-In for Photoshop worked fine. Afterwards, Akvis Sketch runs under the filters menu, but will not accept mouse clicks from my Wacom tablet. Prior to Adobe CMM, all was fine. Somehow, the frustrating attempt to use Adobe CMM broke links to Akvis Sketch.
By the way, Adobe CMM setup tried to run and vanished without a trace - no indication of success or failure. CMM doesn't show on my control panel as installed software, so I can't de-install it.
I did un-install Akvis Sketch and re-install it. No luck as a filter, nor as a stand-alone program.
Additional point of interest - a second identical software/hardware workstation continues to run Akvis Sketch just fine because we didn't try installing Adobe CMM on that machine. It certainly looks like CMM is the culprit here.
Since Akvis Sketch is broken as a stand-alone, I doubt that de-activating, uninstalling and then re-installing, re-activating Photoshop CS5 will help, but it will take a lot of time to recreate actions and re-install other add-ins, plus preferences settings.
Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters, and have you found a work-around?

Thanks for your response. Recent evidence points to Wacom's tablet driver, not the plug-in.
Fact #1 - another identical system with ms mouse worked fine so I swapped out the Wacom tablet and bingo, the Akvis plug-in works again.
Fact #2 - So does Amazon's Kindle for PC app, which also quit working after running the Adobe CMM setup I'd downloaded.
Suggestion - since there's a legacy for CS5 users getting the "you should download CMM" pop-up, yet no need to do this, maybe Adobe should remove the CMM download page from its website - or flag this download as unneccessary for photoshop users. All Best, Charles Pierce.
Message was edited by: PECourtejoie Please do not autoquote messages, it makes threads difficult to follow.

Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Cannot open dng files using Photoshop CS4 after formatting my computer.

I had Photoshop CS4 installed at my desktop and because I couldn't open my raw files taken with my Sony A99 I downloaded DNG Data Converter.After that I was able to open my dng files using Photoshop CS4.After some months I formatted my computer and I reinstalled Photoshop CS4.Now I cannot open my older dng files and I get an error message.Also I cannot update my initial version of Photoshop from version 11.0.

Mac or Win?
Did you update Photoshop after reinstalling it?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm usi

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm using a Mac with Mountain Lion OS. Any solutions?

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

Problems with a new IP phone 7906 after factory reset

Hi Guys
I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
http://www.youtube.com/watch?v=vvCLtwIAwVw
I used this command I found on the net:
Hold down
while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking. Then
release # and type 123456789*0# in sequence.
I was trying to switch my phone to sip and it also dont want to take tftp setup either.

Tim,
Found this on the net
http://www.cisco.com/en/US/ts/fn/620/fn62949.html
Might be woth giving it a go
6.Pull power on the phone (even if power is PoE).
7.Hold down the # key on the phone.
8.Continue holding down the # key and re-apply power.
9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
3491672850*#
Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
* Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
Additional Diagnostic Steps:
- Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
- Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
Regards
Alex

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work. What should I do

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?

Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora

Problem with blue color in Photoshop CS4 after calibrating monitor

Similar Messages

Maybe you are looking for