Problem with bluetooth pairing with BB 8100 and Jag after loading Helper App

Hi,
There is a Pairing Helper App available for the BB 8100 to assist with pairing on Jaguars or
Land Rovers, which I've downloaded.  It seems as though the BB is finding my car -
but the car isn't finding the phone.  Any ideas?

The helper has worked when I have used it in the past, its unfortunate it isnt working for you.  The other topic on here I believe was issues with 4.2.1 code, and devices with 4.2.0 work fine, RIM is aware and working on it apparently.
Keep in mind car bluetooth is finicky for whatever reason, no matter the device or car model. 
www.novawirelessconsulting.ca

Similar Messages

  • Problem remebering bluetooth pairing with 09 Saab (Gm blue tooth)

    I have a 09 saab 9-3, and the car has built in blue tooth. The problem is when i pair the phone it works while the car stays on that whole time. The minuet i turn the car off and try to come back into the car it will not reconnect. If you go to setting and blue tooth and try to tap the correct device it still wont reconnect. The only way to get my GM Blue tooth and my Apple iphone to work is to pair it every time i sit in the car and that just isn't feasible!

    1.   Click the Manage Connections icon on your Home screen
    2.   First, verify that the Bluetooth technology is turned On
    3.   Then select Set Up Bluetooth
    4.   Click Search to find other devices or Listen to allow your BlackBerry smartphone to be discovered by other Bluetooth devices
    5.   Click on the device you would like to pair with and enter the Numeric Passkey if required
    6.   Click Yes
    7.   To connect to a paired device, click the Options icon on the Home screen
    8.   Select Bluetooth
    9.   Click on a Bluetooth enabled device and select Connect
    Make sure your headset is also in discoverable mode. Instructions should be included in it's user manual. If this does not work, then I would assume a compatibility issue.
    Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

  • I have iphone 6 with ios 8.1.1. The bluetooth pairs with my sony car radio and everything works fine. However, the iphone won't stop searching for other devices.

    I have an iPhone 6 with ios 8.1.1 operating system. The Bluetooth pairs with my Sony car radio and works fine. However, the iPhone will not stop searching for other devices. This does not seem to affect anything, but I can't help but think it is using battery power.

    One possibility: 
    How do you know it is searching for other devices?  Because you opened Settings > Bluetooth?
    Why is it searching for other devices? Because you opened Settings > Bluetooth? 

  • TS2756 Does the iPhone 4S supports Bluetooth pairing with iPad mini?

    Does the iPhone 4S supports Bluetooth pairing with iPad mini?

    Only from within peer-to-peer apps from the app store or internet tehering (if proved by the carrier)
    They support bluetooth for handsfree telephone, stereo music, some keyboards, some peer-to-peer apps from the app store, and internet tethering when provided by the carrier.
    Other than these it will not connect to another iphone, phone, computer, device, ipad

  • HT204387 Why does my iPad Bluetooth pair with other devices but my iPhone 4s does not???

    Why does my iPad Bluetooth pair with other devices but my iPhone 4s does not???

    Other devices such as?
    iOS devices have limited bluetooth support, see supported bluetooth profiles.

  • Plantronics m155 bluetooth paired with ios 8.1.3, cuts the phone volume when I turn  on, but won

    Plantronics m155 bluetooth paired with ios 8.1.3, cuts the phone volume when I turn  on, but won't transmit the streaming podcast through the earpiece.

    Hi Eslam El-Gammal,
    Welcome to the Apple Support Communities!
    I understand that after resetting your iPhone, you are being prompted for Apple ID information that is not yours. This can happen if an iPhone is restored without turning off the Find My Phone feature. For more information on this, please refer to the attached article. 
    Find My iPhone Activation Lock - Apple Support
    Best regards,
    Joe

  • What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out

    What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?

    The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
    See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

  • I have recently reinstalled my mac air with the tiny usb device provided and some of the software/apps which came with the mac is now gone! how do i get it back. thanks.

    i have recently reinstalled my mac air with the tiny usb device provided and some of the software/apps which came with the mac is now gone! how do i get it back. thanks.

    thank you so much ill give it a shot

  • Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

    Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

    That means your iMac could not find a system to use for startup.  That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
    First, you should try resetting PRAM
    http://support.apple.com/kb/HT1379
    and if that does not help, use this procedure to reset SMC (power management).  If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
    http://support.apple.com/kb/HT3964
    (This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
    Disconnect all peripheral devices.  When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially).  Start up with nothing but the power cord connected, then add only standard mouse and keyboard.  If it works, run it that way for a while. 
    If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down.  This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu. 
    In Disk Utility, does the internal hard drive appear in the sidebar?  If so, select Macintosh HD in the sidebar and go to the First Aid tab.  Use Repair Disk.  If an error is found, note if Disk Utility was able to fix it or not.
    You can then quit Disk Utility and attempt to restart normally.

  • I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

    I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

    All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?

  • Problem with bluetooth mouse setup at startup and no usb mouse functions

    Today for the first time ever I got this screen for bluetooth mouse setup at startup. I've never seen this before and have no bluetooth devices. Very weird! It continues to search for a blue tooth mouse and won't let me do anything.The window says "Pairing with your bluetooth mouse.If the mouse is not found, make sure it is discoverable" My generic usb scroll mouse will not function and has always worked fine in the past. I tried plugging in the stock apple usb mouse also and this doesn't function either so there is no way to cancell this out. I've restarted several times and no luck ,can't login and no mouse functions. Just continues to search for a bluetooth mouse . This has me worried as this is recording studio computer and I have a session tomorrow . Any ideas how to get this to bypass this bluetooth window so I can startup and login and get my mouse functions back.
    thanks,Craig
    OS 10.4.10
    G5 dual 2.5GHZ / 4GB ram

    Solved it on my end... Hope you're not afraid of using some Unix programming...
    I went into Unix mode (start up holding command key and s-key down). black screen with lines of white type pop up. (Means you are now in Unix mode). Give it a few minutes to check all the computer and when it no longer keeps adding any further info on screen type "fsck -fy", that is fsck space minus sign fy and without the quotation marks - exactly as shown inside quotation marks, and hit enter. It will run for several minutes detecting all that makes your computer work... I had in the final lines a message that read "file system modified". If this is the case than re-enter the fsck -fy command. Repeat this until one of the final lines will read "the volume appears to be OK". (I only had to do it twice to get to it). At this stage type "reboot". My mac restarted and I could log in without any sign of the annoying bleutooth mouse message. Hope it will work for you too!
    Jo

  • IPhone 5S bluetooth pairing with prius in-car phone Issue

    Let me begin by saying that this is my first problem with any apple device!  EVER!!
    I have an Verizon iPhone 5S, less than 2 months old, with the new OS 8.0.2 update and it will no longer pair correctly with my 2012 Prius V's in-car bluetooth phone.  You try to call someone, it doesn't connect and you can't hang up!!!! Then auto-calls them when you turn the bluetooth on (in the phone)... but doesn't physically make the call on the phone.  Now if the bluetooth in my phone is on, and I even start the car, the car states it's trying to call home.  I have attempted many of the following in different combinations with no success:
    Tried to end the call on the car's interface (it won't turn off), pressed the hang up button on the steering wheel -- nada.
    Restarted Phone
    Turned Car on/off/on
    Removed all pairings and re-paired them together
    Made sure the LTE option was on (the iPhone 6 option, which seems to be relatively successful, for data and voice/voice only/data only is not an option on iPhone 5S)
    Now, my husband has a Droid 4 and it works seamlessly with the bluetooth pairing.  The car does play, through the bluetooth, Audio through the phone.
    I guess I should also state I did NOT have any issues with iOS 8.0 or the 8.0.1 upgrades with pairing with the car's bluetooth technology.  I have checked and my Entune "upgrades" are all up to date. 

    Hello Sorridera,
    The article linked below details a number of steps that can restore your iPhone's ability to correctly connect to your vehicle's Bluetooth system.
    If you can’t use a Bluetooth accessory or car kit
    http://support.apple.com/kb/HT6473
    Cheers,
    Allen

  • Can the Apple Watch Bluetooth pair with a car

    Just curious; can the watch be paired to a car's Bluetooth?

    There seems to be conflicts with the Apple Watch, iPhone6 Bluetooth and car connectivity.  The iPhone is the hub that Bluetooth goes through for both the watch and the car, the watch itself is not pairing to the car.  I have an iPhone 6 Plus that has no problem connecting to my Toyota RAV4 EV audio and phone system via Bluetooth.  I recently paired an Apple Watch to the phone, and all was well until the next time I got into my car.  The automobile Bluetooth would no longer automatically pair with the phone, and when I forced a connection, the result was that my watch would no longer receive calls.  I left it alone, and a few days later I realized that my watch had ceased other operations as well: it would no longer charge with the provided dock, and sending taps, heartbeats and on-watch texts immediately failed.  Ultimately, I had to remove the car Bluetooth connection from my iPhone and reset the watch to "out of the box" settings before it became functional again.  At this point I cannot connect the iPhone to the car via Bluetooth without impacting the watch.  Apple Watch devs: software fix, please!

  • E66 bluetooth pairing with BMW

    Hi,
    I have a BMW 6 series and recently bought the new E66. I could not find any posting on bluetooth pairing problems with this model. It is the same classic issue with phonebook.
    I installed Contact Download Application" and made sure it was running on the phone. I paired the phone and car and nothing worked even with one contact.
    I had Sony Ericsson before and had no problem.
    I would be very thankful for your help

    I called on Nokia support and they diagnosed the problem, but unfortunately they did not provide the solution. The new E66 is running on 2.0 Bluetooth platform while my older phones are onm 1.2 so either I change my 6 series or the E66. I am sure you know my decision :-)

  • Bluetooth pair with logitech travel mouse

    I've been updating the various OSes I have installed via Bootcamp on my Macbook Pro: Ubuntu Linux, Windows 7, and Mavericks.  After getting Linux and Windows up to speed, I went back to Mavericks, where I do 95% of my work.  Now the Logitch Travel Mouse that I have used for weeks and was using all morning with Linux and Windows won't pair with Mavericks.  Clearly the mouse itself is fine.  It's about 10 inches from my laptop, and there are fresh batteries in the mouse.  When the Bluetooth applet discovers the mouse, and I click the Pair button, I get a momentary status change from "Connecting" to "Connected" then to "Paring failed".  This happens whether the access code is empty or 0000.
    Does anyone have any advice for me?  (Other than popping the $70 for an Apple mouse that might not work either?)

    Okay.  So I turned Bluetooth off and back on again and that seems to have, at least temporarily, solved the problem.  I don't like to sound critical, but that seems lame to me.

Maybe you are looking for

  • How can I obtain a list of the numbers I have dialed if they are no longer stored in "recent calls"?

    Hello: I called someone in early July but the calls in recent calls go back only to July 14 (2 weeks I presume). I really need this numer and I have no other way to get it. Could you please help me? Thanks.

  • QuarkXpress 8 won't start up and the filesystem verify failed

    HELP Quark won't start - Exception Type: EXCBADACCESS (SIGBUS) Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000004 Then the filesystem verify failed - Verifying volume "Macintosh HD" Performing live verification. Checking Journaled HFS Plus

  • RENTED HD MOVIE NOT PLAYING

    I bought an Apple TV last week, and updated to the latest software. I rented an HD movie today with Apple TV, waited until it said "ready to view", then tried to play it. All I get is a white screen. I fast forward, and still nothing but a white scre

  • Folders&ScreenMagnifying not the same after SnowLeopard upgrade.

    Magnifing my screen and scrolling up to make the pic bigger works just fine but the screen nolonger moves with my mouse, it just magnifies ( it wont move to the left or right) and double clicking on a folder and dragging it back and forth from the bo

  • Changing primary user (in a test machine)

    People,I have a NT4 machine with 2 cubes. Essbase 5.0.2.I want to test in another machine, Essbase 6.5 under Windows 2000.I installed a D: drive so I have the exact storage as my NT4 production machine, but that first user we create I named different