Problem with Calculated Key Figure and Acumulated

Dear Masters,
I am trying to use cumulated KF in a query. No problem with results. I just flag 'Cumulated'. However I need to use the value of each line in an operation. Let me illustrate it:
Cumulated KF    KF1      FINALKF
2                         2             2/2=1
3 (2+1)                1              1/1=1
5 (3+2)                 4             4/2=2
6 (5+1)                 2             2/5=0.4
As you can see above instead divide the KF1 by Cumulated value of a Line, the final result is always KF1/the value that would be the add value. The first line always is right because for the line 1 cumulated value has no accumulation value.
Any idea?
Regards,
GilsonTeixeira

Any idea?

Similar Messages

Problems with Calculated Key Figure in Bex

One of our super users have copied a query and trying to do some changes in the new query. In the Query designer, the person was directly dragging a Calculated Key Figure from the left hand side panel into columns and trying to change its properties (Currency conversion key is changed from 'Nothing Defined' to 'Monthly average rate' with variable entry.
Then we get the error 'Abort system error in program and form SET_TCUR-02-' without even getting the variable popup window.
Also when we check the Query properties, we observed that one variable entry (which is displayed in the target currency field in the properties) is displayed twice and came to know that this is the reason for the error.
But why is that displaying twice there? Is there anything wrong in the way we had created the CKF? Do you have any document on how to use CKFs and RKFs?

Check here:
http://help.sap.com/saphelp_nw04/helpdata/EN/13/e072abaddb574284d22361f0b824bf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/6f/56853c08c7aa11e10000000a11405a/content.htm
For Currency Translation "How to:, see here:
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
Thanks..
Shambhu

Query problem with accumulated key figures

Hi BI Gurus!
I have a report problem that I hope you can help me with!
In my report I have 2 key figures. One for accumulated revenue previous year (KF1) and one for accumulated revenue current year (KF2). Both key figures should be presented in a graph in monthly buckets.
January figures from both the key figures shoule be presented in the same bucket. Therfore I can't use 0CALYEAR since we have the "year" information in there. Instead I'm using 0CALMONTH2 which is only two digits, 01 for January. That way I can map figures from both previous year and current year in the same bucket.
I need the figures to be accumulated and this is what I have problem with. When I run the report today in February 2010 it looks like this:
Month   KF1   KF2
01        10     15
02        10     20
03        15
04        10
05        20
06        10
07        10
08        15
09        15
10        20
11        20
12        10
This is how I would like the report to look like:
Month   KF1   KF2
01        10     15
02        20     35
03        35
04        45
05        65
06        75
07        85
08        100
09        115
10        135
11        155
12        165
I have tried to use the setting "accumulated" for the key figures but then I get this result:
Month   KF1   KF2
01        10     15
02        20     35
03        35     35
04        45     35
05        65     35
06        75     35
07        85     35
08        100   35
09        115   35
10        135   35
11        155   35
12        165   35
Since the KF2 is revenue for current year and I run the report in February I don't want any figures to be displayed in Mars...
I have tried to restrict the key figures by 0CALMONTH2 and 0CALYEAR. The KF1 is havein a restriction to only show values for 0CALYEAR - 1 and an interval for 0CALMONTH2 from JAN - DEC.
The KF2 is having a restriction to only show values in the interval "first month in year - current month" (in this example JAN - FEB) for 0CALMONTH2. And current year for 0CALYEAR.
Despite my restrictions for KF2 the numpers repeats itself for every month...
Any suggestion how I can resolve this?
Best regards
Anders Florin

Hi Khaled and thank you for trying to help me!
I agree with you and think the users should accept the report as it is. But they are claiming that top management will not accept this and they would really want this to be fixed the whay that they want. I have tried to push back on this and said that I'm not sure that it can be resoleved and that it could cost them a lot of money if I try.
But I will try to resolve it for them if I have spare time in the end of the project. I have not promised them anything but it would really be nice if I could fix it.
So when you say I need to use a structure and a calculated key figure. How should the calculated key figure and the structure be configured?
If I use a structure in the rows I guess I can't use same object in calc.key.figure right? Like if I use 0CALMONTH2 in the structure I'm not able to restrict the key figure with the same object? If that is correct I also have a ZMONTH object, different story why I have that... , that I can use in the same way as 0CALMONTH2. Or is this only a problem when I use "local" formulas within the query and not using a "global" calculated key figure? Cause I have only used the "loacal" formula calculated key figure in this report....
Br
Anders

Problem with a key figure restriction

Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

Global calculated key figures and their descriptions

Hi, I currently have a strange problem concerning calculated key figures.
We have several global calculated key figures which are used in approx. 100 querys. These key figures have a custom description ( not the same as the underlying keyfig info object).
When we use the calc. key figures in querys we let them take the description from the global key figure (the box 'use Standard text' is checked). When we execute the query, the description of the calculated does not show. As soon as we uncheck the box 'use Standard text' (and thus use 'local' -query level- descriptions) the description does show. Offcourse this is not a solution but merely a workaround, we want the key fig to take its description from the global key figure.
The problem as described above only occures on one of the two development environments. The environment on which the problem occures has support package skw70018(nwv st 16), the environment on which the problem <u>doesn't</u> occure has support package skw70013.

Execute the content at Infoprovider level as below
Div Team A B C
A X 2 1 6 9
A Y 4 2 9 15
Result Row 6 3 15
If you get same desired result in Infoprovider .. it should come in Report ... Run the report in RSRT (Without cache)
How you built the MP based on single cube or 2 ? Display content in MP for above critieria ... to cross check the report
check the idenfication ... is marked to which cube ?

Diff between Calculated key figure and new formula 6extra functions why

Hi Friends
In BEx query designer we have Restricted key figure & Calculated key figure. In the case of Ristricted Key figure And new selection the difference is Global and local.
But if we come to Calculated Key figure and New Formula the difference is same global and local. But in New formula we have 6 extra function. My question is does is there any certain reason for this or SAP AG not be able to develop those functions
Thganks & Regards
Bramhanand

Hi Surendra thank you for your reply.
But i am not asking difference between calculated key figure and New formula.
What i am asking is in the case of Restricted Key figure And new selection the difference is Global and local.
But in Calculated Key figure and New Formula the difference is same global and local and in New formula we have 6 extra function. My question is does is there any certain reason for this.Why not SAP AG is not included the new formula functions in Calculated key figure.
Thanks & Regards
Bramhanand

Problem saving queries with calculated key figures

Hello Experts,
I am analyzing this problem since many hours during the last weeks and I don't know, what else to do.
The problem is saving a key user query containing a calculated key figure in the production system (BW 3.5 SP SAPKW35015). The Error 'The query could not be saved due to a problem in transport' occures.
If I exclude the KF from the query, saving is possible, so the calculated KF must be the source of the problem.
The system is set to not changeable, but the 'Object Changeability' of 'Query Elements' in 'RSA1' --> 'Transport Connection' is set to 'Changeable Original'. If I set this option to 'Everything changeable', saving of the query works, but this is not possible in production, because transported standard queries would also be changeable.
For saving queries, die authorization object S_RS_COMP and S_RS_COMP1 is included completely with *, but this does not help.
I also transported the query and the KF again from development system ... no change, same problem.
I found the SAP note 533413, but what does this mean? "This problem can only be solved in the next BW release ..." I heard from colleagues, that BW 7.0 has the same problems.
Does anyone have an idea, how to solve this problem?
I would be very thankful for any reply...
Hannes
Edited by: Hannes Heidrich on Jun 23, 2008 12:07 PM

Thank you for your answer, but I have set the Object Changeability to Everything Changeable and restricted the user with S_RS_COMP. So only certain query names can be used and changed. Experiences from collegues said, that deleting and transporting again would not help.
Best Regards,
Hannes

Problem in Calculated Key Figure in BEx 7.0

Hi All,
In Bex 7.0
We have a requirement where we need to display a key figure which is having unit price of an Article. In our InfoProvider we have Article, Store and Date and the report is based on Article. As we have to display only the latest price we have created a RKF by putting a restrcition of the latest date in the date range on the the unit price key figure. But still unit price is getting aggregated over stores.
For example if there are 10 stores and the unit price of an article is 5, then data displayed is 50 and not 5.
We tried to create a Calculated Key Figure using the above RKF and an exception aggregation Average of all detailed value that are not zero, null or error on reference characteristic 0PLANT. Its working fine when the query is restricted to one or two Articles. But for all the articles it gives the following error messages.
1. Error while reading data; navigation is possible.
2. Error occurred during parallel processing of query 17; RC3
3. Error executing physical plan: AttributeEngine: no 6952
4. Error reading the data of infoprovider ZXMSC01$X
5. Amount of data that is to be read from the BIA server is too large
6. The following error 6952 occurred in BIA server
7. Error executing physical plan: AttributeEngine: not enough memory;BwPopMerge pop1(setIsLastMerge(1)),in executor::Executor in cube: p03_zxmsc01
Can anyone tell me the solution for the above error. Or if there is a workaround to our requirement.
Regards,
Sachin

Hi,
Could be a memory issue.
One of your cube in on BIA which is causing the Problem.
So executing the query in RSRT by selecting Do not use BIA index option.
If the query is executed with out any issue then take the cube out of BIA and push it back.
Hope it helps.
Regards,
Raghu
P.S : Also please let us know if this query is live and it is an issue that you are facing after executing it properly for few days.
Or this is a new query created and testing now and in the process got this error?
Edited by: Raghu tej harish reddy on Sep 24, 2009 5:53 AM

Currency translation problem for calculated key figure

Hi All
I have a problem with the currency translation for a calculated key figure.
I have a requirement to show the MM consignment stock value in the specified currency from the selection screen.
For consignment stock, there is no value maintained in the system. So for this we need to calculate the value as below
Restricted key figure: RKFConsignment stock: Total stock with special stock indicator restriction "K"
Calculated keyfigure: Consignment stock value = Nodim( RKFConsignment stock) * (Standard cost / price unit).
Here, in the calculated keyfigure properties --> I have used a currency translation for the 0CALMONTH.
The query has selection on the 0calmonth.
But in the result the I am getting unexpected results.
Do we have any inconsistencies in the currency translation on the formulas?
Please help me on this.
Regards
S.R

Hi All
I have noticed something. I changed my query date selection to Calendar day - Keydate instead of calendar month.
And I have changed the currency variable to fixed exchange rate "CHF", it is working fine.
I think I have some problem with the currency translation variable.
Could anyone of you please send me the currency translation variable for Calendar month with the below parameters
exch rate type : M
Time reference : 0CALMONTH
End of month
Target currency for a variable : < var created on 0currency>
For my report, i need calendar month selection, currency selection.
Please help me with your ideas.
Thank you
Regards
S.R

Creating Query in Production with Calculated key figures

Hi BW Experts,
Can u pls let me know that in case of Production System when we are allowing users to create reports with Adhoc Web Query Designer and using CKF + RKF
(Calculated key Figure) which is already transported to Production in a specific Package, Is Production system will allow to save report?
Pls sugges how to solve this problem ..to give permission for users to create reports in production server with CKF RKF?
Thanks in advance

rsa1 -> transport conection -> object changeability button -> Set query elements as everything changeable.
If you want to refine this you have to do by authorizations.

Problem with displaying key figures in report

Does anyone have experience with SAP Report Designer for Release 7.0. I want to display key figures in the following manner: 1'500 (Which means 1.500.000) For a billion the value displaye should be 1''000 (1.000.000.000).
1000 =     1.000
0'010 =     10.000
0'100 =     100.000
1'000 =     1.000.000
0''010 =     10.000.000
0''100 =     100.000.000
1''000 =     1.000.000.000
Thus the report always shows 4 digit figures. The problem is that I don't know how to include the apostophe as a separator for the million.
Additionaly to that I want to have the font changed to a smaller number, if the figure is to large for the column. Is there a possibity to change the display of the figure with the scaling? And is there a possibility to change the font? These two parameters have to be decided when running the report. (The scale of the numbers can differ within one column.)

there is two way to display the values , one is globally, where u do it the keyfigure and another way is on the query designer level
in keyfigure go to aggregation , there u will get the number display format , u can change there and another way is in the query designer right click on the key figure and select properties and select display format

Problem with virtual Key Figure in a query

Hi Experts,
I would like to share my problem with the virtual key figure in a query:
I have a query with a virtual key figure and when I eject the query by analyzer, the result sometimes is displayed and sometimes is not displayed (is equal to 0), with the same initials values. And when I eject the query by RSRT always display the result for the virtual key figure.
Why don't always display the result?
Thanks a lot

Hi,
I think that the problem is the level of support package. We have BI AddOn 7.X (based on 7.20) support package 0.
What do you think?
Regards

COPA calculated key figures and scheme on R/3 side

We have created calculated key figures on the R/3 side and inputted formula (which is essentially the scheme/basic formula in transaction KER1) for this key figure. We then checked off this key figure in the COPA datasource. These key figures are only adding and subtracting certain elements for a particular record. In RSA3 on the R/3 side, this key figure is calculated correctly. In BW, in the PSA, it's calculated correctly. The problem is when it goes to the ODS. It gets no values. All 0's.
Does anyone have any ideas? It's straight forward mapping and I'm thinking it's a bug, but wanted to check if there was anyone that had this problem before and some "hidden" config had to be done.
Thanks, Mark.

Anyone have any ideas?

Using Explorer with Calculated Key Figures from BEx (BW 7.31 / BI 4.1)

I'm looking for suggestions on how to leverage data from calculated and restricted key figures in BEx (from a BW 7.31 system) with Business Objects Explorer (from a BI 4.1 system). Our current process involves some complicated workarounds and with the implementation of BI 4.1 and I'm hoping to streamline things a bit.
Here is what I had in mind...
An information space (indexed daily) sitting on a universe (hopefully UNX) that referred to a BEx query on a multiprovider in BW. My understanding was that universes would be able to consume BEx queries (including their restricted and calculated key figures) in 4.1. Based on a recent post (http://scn.sap.com/thread/3417905), it appears that the feature that I was hoping for may have not made it into the GA release. Obviously, I could move the calculations and restrictions into BW ETL or maybe into the universe, but since that work has already been done and lives in the queries, I'm hoping to use them! Also, we could use a different tool such as WebI, but at this point the user base is comfortable with Explorer and we would like to continue to use it.
Suggestions?
Thanks!
-S

Hi McDowell,
Regarding to the BEx connection in Explorer, SAP provide two solution
1. BWA connection
2. Unv on top of connection
For the UNV situation, you could use the calculated / restricted key figure in the system but please assgin the aggregation level for them (Database delegate is not supported if I am not wrong)
Also plese consider two points
1. Data size (UNV cannot support large data size)
2. Scheduling (Explorer does not support event trigger? correct me if I am wrong)
Best regards
Alex yang

Restricted & Calculated Key figures and Structures

Hello Gurus,
I'm using a BW Query to create my universe and all I see is a class called Key Figures and few objects. I don't see my restricted and Calculated Key figures.
Also I want to understand how are the Structures in BW Query brought into Universe? All I see is a column class and row class with corresponding objects in it.
Environment: BO XI 3.1
Appreciate your help.
Regards,
Vijay
Edited by: vijay dwivedula on Jun 12, 2009 7:46 PM

Hi Ingo,
Sorry for getting back a little late on this issue. I've been trying to fix other issues. I'm creating my report out of BW Query and I'm not able to see all the Restricted Key Figures. Also when I try to create my report out of existing key figures and verify the data with BW analyzer the data seems to be different.
What happens is in my universe I've two classes naming Rows_xyz, Column_abc etc and there are like 25 objects in Rows_xyz when there are supposed to be like 60 key figures and in Column class I have a single object. When I pull in this coulmn obect and pull like 3-4 key figures (which I made sure have data from BW Query Analyzer) doesn't return any data. It doesn't even throw an error as No data to fetch.
I took the MDX Query that is generated by this report and ran it on the backend and see that there is no data even there. But from the BW Query Analyzer I can see data for this Column and the key figures that I pulled in the report.
Thank you for your help
Vijay

Problem with Calculated Key Figure and Acumulated

Similar Messages

Maybe you are looking for