Problem with call forwarding and "call divert"

I have been receiving calls lately and a dialogue box pops up and says "fowarded call" with a button that says "dismiss" - I'm not sure why or how to disable this. in my settings I have call forwarding turned off. Also when I make calls I sometimes see messages saying something about call forwarding active or active diverts. Again I have call forwarding turned off and I see no settings for divert. How can I fix this?
Thanks.

i am having a similar problem.  I have a Pearl 8100 with T-Mobile.  I've had it for almost two years (since Jan. '07).  About four weeks ago, this problem started.  I have a landline office phone through AT&T, and when I leave the office, I forward this land line to my Pearl.  When someone calls my office after hours, on nights and weekends, the problem is that instead of the person's name and phone number showing up on my caller ID, my Pearl shows that I am calling myself from my own cell phone!  I don't get "Private Number" like you get, the caller ID shows that I am calling myself!
I've spent six or seven hours with T-Mobile tech support, with five different tech people over a period of several days and several phone calls, and they can't figure it out; their final and "best" answer is that it's a blackberry problem, that the issue has been addressed and identified as a "known issue" and a "trouble ticket" has been created.  I contacted RIM and they directed me to their archived troubleshooting and to this forum, so I still don't have an answer.  And T-M had no answer when I told them that this feature worked just fine from Jan. '07 through Aug. '08.  T-Mobile offered to put me into a different device, the T-Mobile wing, which by fair assessment, looks like a piece of junk, and it's window's mobile, which is even worse.  I rejected this option.
I'm hoping someone can solve this.  One friend of mine thought that it's a network issue, any issue with caller ID would be with the network, not the phone or its software...this makes some sense to me...and one of the techs at TM thought that this could be the issue as well.  As T-M upgrades its networks to 3G, these bugs are popping out. who knows, I'm sticking with this Pearl and 8100 for a little while longer, b/c I am waiting to see if an answer shows up somewhere on one of the forums, but I hate not knowing who's calling before I answer the phone!

Similar Messages

  • What's the meaning of Forward No Coverage at Call Forward and Call Pickup Settings

    hi All,
    Please, I have a CUCM and I need to understand the meaning of the follow configuratio at the line:
    Forward No Coverage Internal  
    Forward No Coverage External   
    Forward on CTI Failure   
    Could you explain to me by a easy way?????
    How can I do a test?
    Thanks a lot

    Actually the no coverage is not only for DNs in line groups. The way no coverage works is that you set a CF setting on any phone (doesn't need to be in a line group), and you send them to a hunt pilot. ie CFB to a hunt pilot
    In the hunt pilot for the Forward Hunt No Answer/Forward Hunt Busy you choose:
    Use Personal Preferences—Use this check box to enable the Call Forward No Coverage (CFNC) settings for the original called number that forwarded the call to this hunt pilot.
    So, after it rings your phone, rings thru all the hunt pilot/hunt list/line group members, it goes back to the phone that routed the call to that hunt pilot, looks at the no coverage setting and does as instructed. Send it to VM, another hunt pilot, your mobile, etc.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Problem with xsl:template and call-template

    Hi
    in XSQL i am getting one row like this
    <REASON_FOR_REJECTION>1.Overhead line is not existing in front of the premises,2.The distance from the pole to the serice is more than 30 meters.,3.Another service is existing in the same premises with arrears.</REASON_FOR_REJECTION>
    In the above String for every comma i want to put <br>
    the output should come like this:
    1.Overhead line is not existing in front of the premises
    2.The distance from the pole to the serice is more than 30 meters.
    3.Another service is existing in the same premises with arrears
    i have written xsl like this;i am getting this error;
    XSQL-011: Error processing XSLT stylesheet: ../xsl/CMS48_RejectionLetter1.xsl
    (Error) Template 'ROWSET/ROW/REASON_FOR_REJECTION' invoked but not defined.
    wat's wrong with this code?
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:java="http://xml.apache.org/xslt/java" exclude-result-prefixes="java" version="1.0">
    <xsl:template match="/">
    <html>
    <body Class='Ecrm_Body'>
    <xsl:apply-templates/>
    </body>
    </html>
    </xsl:template>
    <xsl:template match="ROW">
    <p>
    <xsl:apply-templates select="REASON_FOR_REJECTION"/>
    </p>
    </xsl:template>
    <xsl:template match="REASON_FOR_REJECTION">
         <xsl:param name="REASON_FOR_REJECTION"/>
    <xsl:variable name="year"
    select="substring-before(.,',')"/>
    <xsl:choose>
    <xsl:when test="string-length($year) > 0">
    <td><xsl:value-of select="$year"/></td>
         <xsl:call-template name="ROWSET/ROW/REASON_FOR_REJECTION">
    <xsl:with-param name="REASON_FOR_REJECTION">
              <xsl:value-of select="substring-after($REASON_FOR_REJECTION,',')"/>
    </xsl:with-param>
    </xsl:call-template>
    </xsl:when>
    <xsl:otherwise>
    <td><xsl:value-of select="$REASON_FOR_REJECTION"/></td>
    </xsl:otherwise>
    </xsl:choose>
    </xsl:template>
    </xsl:stylesheet>

    <xsl:call-template name="ROWSET/ROW/REASON_FOR_REJECTION">
    This looks for a template defined like this:
    <xsl:template name="ROWSET/ROW/REASON_FOR_REJECTION">
    not one defined like this:
    <xsl:template match="ROWSET/ROW/REASON_FOR_REJECTION">

  • Problems with missing forward and backward arrows in iweb slideshow.

    Can anyone help?

    The only way i could get it to work was to open the "domain" file in a different mac. Then the arrows appear.
    Good luck
    Dave

  • Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

    Hello apple
    I have the problem with my iPhone and my friends have this problem too.
    My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
    Who have this problem??

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • There was a problem with your order please call?

    My wife ordered a 4S 32GB black model and was putting me on her plan of currently 2 phones.  We ordered via the site about a week ago and got the message the phone would ship 11/30, added a data plan etc on a 3rd separate line.  Received an order confirmation, but couldnt use the 6-7 digit order number to check on it kept saying no order.  Today she checked and said she received soemthing from Verizon saying there was a problem with the order and to either call or email them.  She's at work til 4p EST time but was curious if anyone else got this and what it could cause this message?
    On a separate note I have my own plan with a iPhone 4 that I was going to cancel and move to her plan porting my number but the order wouldnt permit a port of a verizion number.  I called and the rep swore there would be no cancellation fee (sounds fishy to me) but he had someone else look and they said there was no cancellation fee either.  I dont know if the order flow recorded that and they are question it or something else is going on.
    Any ideas on why Verizon would have a problem with the order would be great!  Thanks!

    As far as the porting of your line to your wife's account...you might want to go in to a local store to handle that. I don't think it would be a port in the traditional sense...but a swap of responsibility...meaning your wife would take ownership of your line. I will have to do that soon for one of the lines under me so that the person using it can have it in their name. In that instance, there would not be any cancelation fees because the line isn't being canceled. The account ownership is just being taken over by someone else and they would take over the remainder of the contract.
    As far as the issue with the order...if your wife makes you an authorized manager on the account you would be able to call in and discuss whatever is happening. The issue could be a number of things so it's hard to tell you what it could be. It's also possible that there isn't an issue at all and the problem is just that the system isn't recognizing the order number.

  • Before I update, is firefox 27.0.1 compatable with Skype click and call?

    Every time I update Firefox I lose Skype click and call and have to wait weeks for access to it again. I now will not update Firefox until I know it is comparable with Skype click and call.
    Is firefox 27.0.1 compatable with Skype click and call at this time?

    I presume ''"Skype click and call"'' is official [http://portableapps.com/apps/internet/firefox-portable-esr Skype] software.
    If you need skype and this happens on every update an unoficial solution would be to install Firefox portable ESR as an additional browser and then use that for skype whilst using the fully updated Firefox Release for all other browsing. (Firefox Portable is based on Mozilla Firefox, the ESR version probably will remain compatible with skype and not have problems on updates )
    * http://portableapps.com/apps/internet/firefox-portable-esr
    The official solution would be to use Firefox Releases and update Skype. Complaining to Skype as necessary when it is not compatible with the Firefox Releases. Skype will be aware of the Release dates and will be able to test and modify their software as necessary whilst using public pre release versions of Firefox. <br />Presumably Skype is controlled by MS and they would prefer you to always use IE and not use Firefox at all.

  • Acrobat Problem with Vista X64 OLE calls

    Acrobat Problem with Vista X64 OLE calls - CreateObject("AcroExch.AVDoc") does NOT open its window in the CreateObject("AcroExch.App") - but opens a new (invisible) window. Works correctly in XP x64 and 32 bit Vista - happens with Acrobat v8 and v9.

    Again, I contend that something changed between 8.1.2 and 8.1.3.
    refer to http://www.adobeforums.com/webx/.59b6fe7c
    To show the viewer, use the show method after the document is opened.
    In 8.1.2 you did not have to perform this extra step.

  • TS4268 I have two IPad registered in my name. I would like to leave one at home with my husband and call him on FaceTime while I travel. I cannot get this to work between the two iPads. What am I doing wrong?

    I have an old IPad 2 and a new IPad. They are both registered to my name . I would like to leave the old one at home with my husband and call him on FaceTime when I travel. I have tried this at home with the two iPads and cannot seem to get it to work. Any ideas?

    Hey Lft1033,
    You'll want to have your husband sign up on the older iPad with his own Apple ID. First, on the old iPad, sign out of your Apple ID:
    To sign out of your Apple ID
    Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
    Then, sign in with the other Apple ID, and that should work. If it doesn't work after having separate Apple IDs on each iPad, check out the following document where, towards the bottom, there is a "Troubleshooting FaceTime calls" section:
    iOS: Using FaceTime
    http://support.apple.com/kb/HT4319
    Have a good one,
    Delgadoh

  • HELP!! asa 5505 8.4(5) problem with port forwarding-smtp

    Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa  to my mail server.
    my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
    When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
    below is my config file , any help would be appreciated
    Result of the command: "show running-config"
    : Saved
    ASA Version 8.4(5)
    hostname ciscoasa
    domain-name domain.local
    enable password mXa5sNUu4rCZ.t5y encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.0.0.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    pppoe client vpdn group ISPDsl
    ip address 80.80.80.80 255.255.255.255 pppoe setroute
    ftp mode passive
    dns server-group DefaultDNS
    domain-name domain.local
    same-security-traffic permit intra-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network Server_SMTP
    host 10.0.0.2
    access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    object network obj_any
    nat (inside,outside) dynamic interface
    object network server_SMTP
    nat (inside,outside) static interface service tcp smtp smtp
    nat (inside,outside) after-auto source dynamic any interface
    access-group outside_access_in in interface outside
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    http server enable
    http 10.0.0.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    telnet timeout 5
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    vpdn group ISP request dialout pppoe
    vpdn group ISP localname [email protected]
    vpdn group ISP ppp authentication chap
    vpdn username [email protected] password *****
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
    : end

    Hi Jennifer
    I have removed that nat line as suggested but still no joy.
    here is my current config
    Result of the command: "show running-config"
    : Saved
    ASA Version 8.4(5)
    hostname ciscoasa
    domain-name domain.local
    enable password mXa5sNUu4rCZ.t5y encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.0.0.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    pppoe client vpdn group ISP
    ip address 80.80.80.80 255.255.255.255 pppoe setroute
    ftp mode passive
    dns server-group DefaultDNS
    domain-name domain.local
    same-security-traffic permit intra-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network Server_Mail
    host 10.0.0.2
    access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    object network obj_any
    nat (inside,outside) dynamic interface
    object network Server_Mail
    nat (inside,outside) static interface service tcp smtp smtp
    access-group outside_access_in in interface outside
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    http server enable
    http 10.0.0.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    telnet timeout 5
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    vpdn group ISP request dialout pppoe
    vpdn group ISP localname [email protected]
    vpdn group ISP ppp authentication chap
    vpdn username [email protected] password *****
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
    : end
    also here is the packet trace
    and my acl
    Thanks

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Problem with the MenuBar and how can i delete a own component out of the storage

    Hello,
    I opened this thread in the category "Flex Builder 2", but
    under this category my questions fit better.
    I have a problem with the MenuBar and a question to delete a
    component out of storage.
    1. We have implemented the MenuBar, which was filled
    dynamically with XML data.
    Sporadically it will appear following fault, if we "mousover"
    the root layer.
    RangeError: Error #2006: Der angegebene Index liegt
    außerhalb des zulässigen Bereichs.
    at flash.display::DisplayObjectContainer/addChildAt()
    at mx.managers::SystemManager/
    http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
    at mx.managers::SystemManager/addChild()
    at mx.managers::PopUpManager$/addPopUp()
    at mx.controls::Menu/show()
    at mx.controls::MenuBar/::showMenu()
    at mx.controls::MenuBar/::mouseOverHandler()
    Here a abrid ged version of our XML to create the MenuBar:
    <Menuebar>
    <menu label="Artikel">
    <menu label="Artikel anlegen" data="new_article" />
    <menu label="Artikel bearbeiten" data="edit_article" />
    <menu label="Verpackung">
    <menu label="Verpackung anlegen" data="new_package" />
    <menu label="Verpackung bearbeiten" data="edit_package"
    />
    </menu>
    <menu label="Materialgruppe">
    <menu label="Materialgruppe anlegen"
    data="new_materialgroup" />
    <menu label="Materialgruppe bearbeiten"
    data="edit_materialgroup" />
    </menu>
    </menu>
    </Menuebar>
    It is a well-formed XML.
    2. Delete a component out of storage
    We have some own components (basically forms), which will be
    created and shown by an construct e.g.
    var myComponent : T_Component = new T_Component ;
    this.addChild(myComponent)
    Some of our forms will be created in an popup. On every call
    of the popup, we lost 5 mb or more, all childs on the windows will
    be removed by formname.removeAllChild();
    What cann we do, that the garbage collector will dispose this
    objects.
    Is there a way to show all objects with references (NOT
    NULL)?
    I have read in the Flex Help, that
    this.removeChild(myComponent) not delete the form and/or object out
    of the storage.
    Rather the object must be destroyed.
    It is sufficient to call delete(myComponent) about remove
    this object out of the storage as the case may be that the
    garbage-collector remove this object at any time?
    Or how can I destroy a component correctly. What happens with
    the widgets on this component e.g. input fields or datagrids?
    Are they also being deleted?
    Thanks for your help.
    Matze

    If you mena the "photo Library" then you cannot delete it.
    This is how iphone handles photos.  There are not two copies.  There a re simply two places from which to access the same photos.  ALL photos synced to iphone can be accessed via Photo Library.  Those same pics can be accessed via their individual folder.

  • I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

    I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609.  Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2.  My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

    Handoff Continuity Troubleshooting

  • I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

    I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
    I would like to set up a new Apple Id for one of the phones and remove it from the old account.
    If I do that, can I move all of the purchased apps and songs to the new Apple account?
    Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

    Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address).  While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
    Rather than do all that, don't fight it -- use separate IDs for iCloud.  You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

Maybe you are looking for