Problem with calling a report from a function module. Please help! URGENT!

Hi Experts,
I have a scenarion like this:
XI -
> Function Module -
> ABAP Report
From XI I am callingf a function module in another R/3 system. This function module inturn calls a ABAP report using SUBMIT statement. The function module and the report reside in the same R/3 system.
I am calling the report like this:
SUBMIT yseg_save_bp_data WITH SELECTION-TABLE rspar
AND RETURN.
The problem is when I run the function module directly in the R/3 system then it calls the report without any problem.
On the other hand, when I call the function module from XI then the report is not called. On debug mode I found that the program exits just at the Submit statement. Why is this strange problem?
What mistake am I doing? Is there any limitations or restrictions with SUBMIT statement.
What is the correct way of using submit statement in this scenario?
Kindly help me!
Thanks
Gopal

Hi Rao,
I have created the FM as remote RFC. Infact XI is able to call the FM. Only problem is when it reaches the point where the report is called via SUBMIT it exits.
Help me please!
Thanks
Gopal

Similar Messages

Calling java APIs from a function module

Hi,
Can someone tell me whether it is possible to call Java APIs from a function module in SAP system?
Thanks in advance,
Vineetha

Hi,
I guess you have changed the properties of screen only.
I assume you have made a Ztransaction Code.
When you define a transaction code, you need to specify a screen number for radio option program and screen and you need to specify a screen and not subscreen.( I think so!!)
You changed only the code without changing the transaction code properties.
Therefore, i think u r getting a dump.
If you want to call your subscreen, call it in some screen and then call that screen using your transaction code properties.
To include a subscreen screen in the subscreen area of the main screen and call its PBO flow logic, use the following statement in the PBO event of the main screen:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING <prog> <dynp>.
To call the PAI flow logic of the subscreen screen, use the following statement in the PAI flow logic of the main screen:
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Refer:
http://help.sap.com/saphelp_webas630/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Regards,
Tanveer.
Please mark helpful answers.
Message was edited by: Tanveer Shaikh
Message was edited by: Tanveer Shaikh

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

How to download garageband old version? i mean version 1.0 to install it on iphone 4s with ios 6.0.1??? please help urgently, how to download garageband old version? i mean version 1.0 to install it on iphone 4s with ios 6.0.1??? please help urgently

how to download garageband old version? i mean version 1.0 to install it on iphone 4s with ios 6.0.1??? please help urgently, how to download garageband old version? i mean version 1.0 to install it on iphone 4s with ios 6.0.1??? please help urgently

I did this a few weeks ago to be sure it was going to work for a young person I was giving my ipod to. Then I reset the information for her and now it will not load. Very sad. She is so talented and she really needs this. Anyone know?

Problem when calling a report from java

Hi all,
i have created a report using ireport which contains arabic data.
when i execute the report from ireport to generate a pdf file it works.
however when i call this report from java i have an exception"
Could not create the report Could not load the following font :
pdfFontName : ARIAL.TTF
pdfEncoding : Identity-H"
the pdfFont i used it in ireport, also the pdfEncoding.
did anyone passed with the same problem
thanks for help

Hello Oracle experts,
The parameters are getting passed successfully in my report.
But I want to know hous to use it in my query group.
I just want the syntax.
Thanks

Problem while calling a report from the report

Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regards

Thanx,
I have solved this problem.
Regards,
Hafeez

How can I call a Report From database function

Hi all,
I want to call a Report from a database function. Could you hel
me???
Rgds

Hello there!
There is a solution for executing an executable like RWRUN60
from PL/SQL on http://asktom.oracle.com/pls/ask/f?
p=4950:8:227101::NO::F4950_P8_DISPLAYID,F4950_P8_B:150612348067,Y
Or you can invoke the CGI from the Reports-Server through
UTL_HTTP
Hope this helps
Dannys

Problem in Calling a report from form 6i using parameters

Hello Oracle experts,
I am facing a problem while calling a report using form 6i and passing parameters,
Actually the problem is I want to use the parameters passed to reports in a
query group in my report. I am not able to use the parameters passed by form to report in one of my query groups in report. Could anybody guide my how to use it.
Thanks

Hello Oracle experts,
The parameters are getting passed successfully in my report.
But I want to know hous to use it in my query group.
I just want the syntax.
Thanks

Crystal reports from SAP function module

Hi,
How to create report based on SAP function module...
I tried it and succeeded for one function module... but i need single report for 3 function modules.
Please let me know i can get them,,, please....!!
When i select all 3, it showing links, what about Links??
Thank You!

No one answered it so far...!!

Problems with different received message from sql function

Hello all!
I have a little problem with my BPEL process. I call a sql function that returns a string. In this string I have a xml. The returned message can be something like:
<error><id>id_error</id><message>descr_error</message></error>
or
<comm>
<header>
children tags
</header>
<body>
children tags
</body>
</comm>
As you see, I can receive two types of messages. Of course, the process transforms string -> xml.
Depending on the type, the process must choose between two flows.
My questions are: what should be the solution(the steps) to determine what type of message the function returns? In my project, where should I define the same message types in order to assignate them to a variable? In a xsd?
Thanks in advance!!

seems like you could solve this with a <pick>. Take a look at the section "One Request, One of Two Possible Responses" in chapter 13 of the bpel developer guide.

Problem with Creation of CRM Order via Function Module Test

I am trying to check the order creation process from external systems by using the test function in Tcode SE37 with Function Module BAPI_BUSPROCESSND_CREATEMULTI.
I have created a Test Sequence of the following FMs:
BAPI_BUSPROCESSND_PROCSETTINGS
BAPI_BUSPROCESSND_CREATEMULTI
BAPI_PROCESS_SAVE
BAPI_TRANSACTION_COMMIT
All that I have been able to create so far is an order header without a Sold-to or Ship-to and no items. I am able to populate the Organization data, Header text and Appointments. The only partner function that is being populated is the one that is being automatically picked up from my user master.
For the BAPI_BUSPROCESSND_CREATEMULTI I am populating the following tables:
HEADER          1 entry
ITEM               2 entries
PARTNER          2 entries
ORGANISATION     1 entry
APPOINTMENT          2 entries
INPUT_FIELDS          41 entries
SCHEDULELINE     2 entries
I have created the entries based upon information gained through debugging function module CRM_ORDER_MAINTAIN during the creation of a service order.
It would be interesting to know if anybody has successfully created an order via the SE37 test function and if so, it would be useful to see the data in the relevant tables.

HEllo ,
Write a wrapper to the function module CRM_ORDER_MAINTAIN.
To populate the Text use below code
ls_input_field_names-fieldname = 'REF_GUID'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'REF_KIND'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDID'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDSPRAS'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDSTYLE'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'TDFORM'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'LINES'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_input_field_names-fieldname = 'MODE'.
INSERT ls_input_field_names INTO TABLE lt_input_field_names.
CLEAR ls_input_fields.
ls_input_fields-ref_guid    = attr_guid.
ls_input_fields-ref_kind    = 'A'.
ls_input_fields-objectname = 'TEXTS'.
CONCATENATE 'CRM_ORDERH' order_guid INTO ls_input_fields-logical_key.
ls_input_fields-field_names = lt_input_field_names.
INSERT ls_input_fields INTO TABLE attr_t_inputfields.
Call Order maintain FM to create any order
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_text               = lp_order->attr_t_text
      it_partner          = lp_order->attr_t_partner
    IMPORTING
      et_exception     = et_exception
    CHANGING
      ct_orderadm_h     = lp_order->attr_t_orderadm_h
      ct_input_fields      = lp_order->attr_t_inputfields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Satish

How to call the Report program into Function module

Hi Experts,
Actually I want to create the DataSource. But I have only the ALV report program. I need to create function module but I dont know how to call the ALV report program using in function module
So could you please any one send the Document or step by step method?
Advance Thanks,
Sathis

If the report is just based out of a table than create a Generic Extractor using View.
If its an InfoSet query than create a Generic Extractor on that InfoSet.
If its an ABAP report than create a Generic Extractor using FM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

Problem with File download in ALV via ITS. Please help!

Hi Experts,
I have a ALV report which I have web enabled using ITS service. In the ALV there is a delivered functionality for file download. It works fine when the report is run in the SE80. But when I run the ITS service for the report and choose file download option it displays a page saying "this page has been diaplayed due to technical reasons" with title "File properties". In addition it looks for Java runtime in the browser. After all this it opens a popup window for selecting path and file name.
This is not user friendly and many customers have rasied their concerns on it.
My question is that,
Q1: What is the need of this "File properties page"? Why ITS calls this while ABAP editor does not?
Q2: Is there any way we can suppress this so that it directly opens a popup window for selecting path and file name?
Please help me.
Thanks
Gopal

Hello Klaus,
i have also the problem with these intermediate screens!
We have in between installed patch 22 for ITS 6.20 and SP18 at SAP Netweaver 2004!
But they are still not processed invisible for the users.
Are there any additional parameters, which controls this behaviour(~webgui_updown_make_visible is not used!)?
How can i check, if i have really a.ex. the actual ws.jar-file or other related files of the patch?
We are using the standalone ITS with an own (modified) IAC with an own CI-design for the webpages. The intermediate screens are displayed with the "normal" SAPGUI-design because of the parameter ~generatedynpro. Without this it does not work, because the template SAPLSIT_0100 is missing!
Or do you have an example for such a intermediate template with the applet for an upload of a file?
Thanks in advance
Felix

Problems with Ringtone Creator app for blackberry curve. Please Help!

I recently downloaded the ringtone creator app to use to create my own ringtones with my mp3s, and i made one and it worked fine yesterday. Now today i went to make another one and it has been processing for two hours now. I just took the battery out to reboot it and see if that would help. How can i prevent this from happening again?

Have the same problem with my BB Curve 8520 in Germany ...

Problem with calling a report from a function module. Please help! URGENT!

Similar Messages

Maybe you are looking for