Problem with cluster table in HR

Hi everybody
We are testing TDMS in HR and I have a problem: we want to transfer spanish cluster (PCL2) to the receive system, for this table the entry is transported
but if I execute transaction pc_payresult the tables of the cluster don´t appear, we used all the cluster tables in the activity transfer selection criteria but the results
are de same.
Could please help me?
Regards

Hello,
the best thing to do is to create an OSS message with the component XX-PROJ-DMS-HR if the following don't help:
1) have you checked in the PCL2 in the target system with SE16 that the entries really are there for the RE and CU clusters?
2) what does the protocol of the "confirm" function say (are the PCL2_RE, PCL2_CU and WPBP_RGDIR mentioned?) 
3) if the protocol doesn't mention these data types then maybe the "Payroll Cutoff" date is set so that no results are found.
Hope this helped.
Gerard White.

Similar Messages

  • Problems with a table in PDF`S footer

    Dear sirs,
    We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
    We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
    another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
    On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
    We have no problems with the table included in the main body
    In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
    May you help us to solve our problem?
    Thanks in advance your help.
    Edited by: emgaitan on Mar 16, 2010 2:18 PM

    Wardell,
    Check the data in RSA3 for the extractor that you use to bring data .
    You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
    Let me know if you need anything else.
    Thanks
    Ravi Thothadri
    [email protected]

  • I am getting problem with internal table & work area declaration.

    I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
    TYPES : BEGIN OF ty_makt,
             matnr TYPE makt-matnr,
             spras TYPE makt-spras,
             maktx TYPE makt-maktx,
             maktg TYPE makt-maktg,
             celltab TYPE lvc_t_styl,
           END OF ty_makt.
    DATA : i_makt TYPE TABLE OF ty_makt.
    DATA : wa_makt TYPE ty_makt .
        But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
    i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

    Hi Nagasankar,
    TYPES : BEGIN OF TY_MATNR,
                  MATNR TYPE MAKT-MATNR,
                  SPRAS TYPE MAKT-SPRAS,
                  MAKTX TYPE MAKT-MAKTX,
                  MAKTX TYPE MAKT-MAKTG,
                  CELLTAB TYPE LVC_T_STYL,  " Its Working perfectly fine..
                 END OF TY_MAKT.
    DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
              WA_MAKT TYPE TY_MAKT.
    Its working perfectly fine. if still you are facing any issue post your complete code.
    Thanks,
    Sandeep

  • Problem with a table control

    Hi gurus,
    I´ve a problem with a table control. It has 3 columns which one is a checkbox.
    I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
    Thanks for all
    Dani

    Assign a function code to the checkbox column....
    so when u check / uncheck any entry, PAI + PBO will be triggered....
    In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
    by looping at screen and setting screen-input = 0 for rest of the columns.
    like ...
    LOOP AT tc_itab
           WITH CONTROL tc_test
           CURSOR tc_test-current_line.
       module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
    ENDLOOP.

  • Problem with maintain table views SM30 Transaction

    Hello All,
    i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
    we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
    Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
    the ZIV_DP_PLCHAR_LA is the name of my table...
    can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
    SM30 "maintain table views: initial screen"
    if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
    to have a new screen?
    thanks for all
    Bilal

    Hi
    First delete the old table maintainence generator.
    Now Recreate the screen and your table is good to go..
    These error messages come when we add new fields and different version of the table maintainence generator in database.

  • Problem with Pivot Table with Graph: Line Bar Combo

    Hello people!
    I have a problem with pivot table and line bar combo (all in the same view (pivot table))
    I have some measures and one dimension in my report.
    --------------measure1---measure2---measure3
    Dim A.1
    Dim A.2
    Dim A.3
    If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
    Thank you very much!

    Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
    This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

  • Problem with truncate table in procedure ora -00054

    hi do anybody know where is mistake ???
    the procedure has problem with truncate table
    ora - 00054: resource busy and acquire with NOWAIT specified
    ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
    ora - 06512 at "POVAPSYS.POVAPSYS", line 6
    ora - 06512 at line 1
    this is my procedure....
    AS
    BEGIN
    execute immediate 'TRUNCATE TABLE hman_t_max';
    INSERT INTO hman_t_max SELECT * FROM hman_v_max;
    COMMIT;
    END;

    2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
    COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
    3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
    SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
    Gita,
    I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
    Cheers
    Sarma.

  • Problems with partition tables

    Hi all,
    I've got some problems with partition tables. The script at the bottom run but when I wanna insert some values it returns me an error
    (ORA-06550: line 1, column 30: PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
    ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
    ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored)
    and I can't understand why!
    There's something incorrect in the script or not?
    Please help me
    Thanks in advance
    Steve
    CREATE TABLE TW_E_CUSTOMER_UNIFIED
    ID_CUSTOMER_UNIFIED VARCHAR2 (27) NOT NULL ,
    START_VALIDITY_DATE DATE NOT NULL ,
    END_VALIDITY_DATE DATE ,
    CUSTOMER_STATUS VARCHAR2 (255)
    PARTITION BY RANGE (START_VALIDITY_DATE)
    SUBPARTITION BY LIST (END_VALIDITY_DATE)
    PARTITION M200909 VALUES LESS THAN (TO_DATE('20091001','YYYYMMDD'))
    (SUBPARTITION M200909_N VALUES (NULL), SUBPARTITION M200909_NN VALUES (DEFAULT)),
    PARTITION M200910 VALUES LESS THAN (TO_DATE('20091101','YYYYMMDD'))
    (SUBPARTITION M200910_N VALUES (NULL), SUBPARTITION M200910_NN VALUES (DEFAULT)),
    PARTITION M200911 VALUES LESS THAN (TO_DATE('20091201','YYYYMMDD'))
    (SUBPARTITION M200911_N VALUES (NULL), SUBPARTITION M200911_NN VALUES (DEFAULT)),
    PARTITION M200912 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD'))
    (SUBPARTITION M200912_N VALUES (NULL), SUBPARTITION M200912_NN VALUES (DEFAULT)),
    PARTITION M201001 VALUES LESS THAN (TO_DATE('20100201','YYYYMMDD'))
    (SUBPARTITION M201001_N VALUES (NULL), SUBPARTITION M201001_NN VALUES (DEFAULT)),
    PARTITION M201002 VALUES LESS THAN (TO_DATE('20100301','YYYYMMDD'))
    (SUBPARTITION M201002_N VALUES (NULL), SUBPARTITION M201002_NN VALUES (DEFAULT)),
    PARTITION M210001 VALUES LESS THAN (MAXVALUE))
    (SUBPARTITION M210001_N VALUES (NULL), SUBPARTITION M210001_NN VALUES (DEFAULT))
    ;

    Hi Hoek,
    the DB version is 10.2 (italian version, then SET is correct).
    ...there's something strange: now I can INSERT rows but I can't update them!
    I'm using this command string:
    UPDATE TW_E_CUSTOMER_UNIFIED SET END_VALIDITY_DATE = TO_DATE('09-SET-09', 'DD-MON-RR') WHERE
    id_customer_unified = '123' and start_validity_date = TO_DATE('09-SET-09', 'DD-MON-RR');
    And this is the error:
    Error SQL: ORA-14402: updating partition key column would cause a partition change
    14402. 00000 - "updating partition key column would cause a partition change"
    *Cause:    An UPDATE statement attempted to change the value of a partition
    key column causing migration of the row to another partition
    *Action:   Do not attempt to update a partition key column or make sure that
    the new partition key is within the range containing the old
    partition key.
    I think that is impossible to use a PARTITION/SUBPARTITION like that: in fact the update of "END_VALIDITY_DATE" cause a partition change.
    Do u agree or it's possible an update on a field that implies a partition change?
    Regards Steve

  • Problem with the table control BDC in FV60 transaction

    Hi All,
    I got the problem with the table control in FV60 transaction.
    This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
    I know we can post only 999 line items,but in my file only 920 line items.
    Please give me solution,if anybody come across this situation.
    Thanks & regards,
    rakesh.

    Hello Rakesh ,
    your file may have only 920 line items , but based on those line items, SAP may create few more  new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
    regards
    Prabhu

  • Problem with ADF Table and doDML method.

    HI,
    I have a problem with ADF Trinidad Table. I have one search form and which i click on search button the result is coming it's working fine, And when i click on CreateInsert button to insert a new row it's adding after entering all the data into the table when i click on button on the page i am getting error like
    Messages for this page are listed below.
    Error     
    Missing mandatory attributes for a row with key oracle.jbo.Key[1 ] of type AppModule.CmSubscribersView1
    Error     
    Attribute Name in AppModule.CmSubscribersView1 is required
    Error     
    Attribute CreatedBy in AppModule.CmSubscribersView1 is required
    Error     
    Attribute CreationDate in AppModule.CmSubscribersView1 is required
    Here Created By and Creation Date are not available in the table i need to set these data from back end for that i have used doDML() method in the entity object and i written the logic but this method not even invoking as i couldn't able to see the logs in the server.
    protected void doDML(int operation, TransactionEvent e) {
    super.doDML(operation, e);
    System.out.println("^^^^^^^^^^^^^^^^66666Inside entity object^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ");
    // AppModuleImpl am=new AppModuleImpl();
    // Number userID= am.getUserId();
    //System.out.println("User id in the Entity Object Is: "+userID);
    oracle.jbo.domain.Date dt = new Date();
    if(operation ==DML_INSERT){
    EntityDefImpl cmSubscribers=CmSubscribersImpl.getDefinitionObject();
    CmSubscribersImpl newSubscribers=(CmSubscribersImpl)cmSubscribers.createInstance2(getDBTransaction(),null);
    Number n=new Number(1599);
    newSubscribers.setCreatedBy(n);
    newSubscribers.setCreationDate(dt);
    newSubscribers.setLastUpdateDate(dt);
    newSubscribers.setLastUpdatedBy(n);
    But still the same problem can any one help me inthis.
    Regards,
    Edited by: user5802014 on Aug 21, 2009 2:04 PM

    Hi,
    Modify your method to call super.doDML() after initialization of mandatory attributes as below:
    protected void doDML(int operation, TransactionEvent e) {
         oracle.jbo.domain.Date dt = new Date();
         if(operation ==DML_INSERT){
              //PRE-INSERT code begins     
           EntityDefImpl cmSubscribers=CmSubscribersImpl.getDefinitionObject();
           CmSubscribersImpl newSubscribers=(CmSubscribersImpl)cmSubscribers.createInstance2(getDBTransaction(),null);
           Number n=new Number(1599);
           newSubscribers.setCreatedBy(n);
           newSubscribers.setCreationDate(dt);
           newSubscribers.setLastUpdateDate(dt);
           newSubscribers.setLastUpdatedBy(n);
           //PRE-INSERT code ends
           super.doDML(operation, e);
           //POST-INSERT code if any
         }else
            super.doDML(operation, e);
    }Sireesha

  • Problem with Light Table in Bridge CS6

    Hi! After a re-install (which didn't fix the problem with PS), I now find that, when using the light table in Bridge CS6 and after hitting the space bar, if I then click on the image, it goes to 800% size! Prior to the uninstall & re-install, it worked perfectly in taking images to 100% size.
    Hope someone can help.......
    Thanks, Wardie

    Why did you reinstall photoshop cs6?
    What operating system are you using?
    Did you reinstall all the updates for photoshop cs6 by going to Help>Updates from within photoshop cs6?
    After you enter the light table, use your mouse scroll wheel to zoom back to 100% and exit the light table.
    The next time you go to the light table and click on the picture it should only go to 100%.

  • Problem with temporary table refresh

    Hi,
    I running a process before validation on a page to populate a temporary table when I click a button.
    On the following page I've built a shuttle on the temporary table. Not the most elegant solution, but the shuttle LOV box wouldn't process the oracle text commands in the SQL.
    I'm not getting any error, but I have an unusual problem
    It takes two passes for the data to be replaced. i.e I enter 'ABCD' in the filter and it returns data with 'ABCD'
    If I return to the page and change the filter to 'EFGH' I still get 'ABCD'. I return to the page and click the button again and I get 'EFGH' results
    I've checked the data in the temporay table and that is updating in line with the problem.
    I've looked at the debug and that seems fine (i.e I can see the changed filter value), I've tried moving the truncate to a different process, that didn't help.
    I've run it in SQL developer and it seems to work fine.
    I've included the code below, but I can't see a problem with it.
    Can anybody help?
    begin
    EXECUTE IMMEDIATE('TRUNCATE TABLE temp_cat');
    commit;
    if length(:P26_ADD_FILTER) > 0 then
    insert into temp_cat (core_cat_id, core_cat_code, core_cat_desc)
    select core_cat_id,core_cat_code,core_cat_desc from core_cat where CONTAINS (core_cat_desc, '
    <query>
    <textquery lang="ENGLISH" grammar="CONTEXT">&P26_ADD_FILTER.
    <progression>
    <seq><rewrite>transform((TOKENS, "{", "}", " "))</rewrite></seq>
    <seq><rewrite>transform((TOKENS, "{", "}", " ; "))</rewrite></seq>
    <seq><rewrite>transform((TOKENS, "{", "}", "AND"))</rewrite></seq>
    <seq><rewrite>transform((TOKENS, "{", "}", "ACCUM"))</rewrite></seq>
    </progression>
    </textquery>
    <score datatype="INTEGER" algorithm="COUNT"/>
    </query>')>0 and core_cat_id not in (select pipe_project_cat.core_cat_id from pipe_project_cat where txtpamref = :p26_pamref);
    else
    insert into temp_cat (core_cat_id, core_cat_code, core_cat_desc)
    select core_cat_id,core_cat_code,core_cat_desc from core_cat where
    core_cat_id not in (select pipe_project_cat.core_cat_id from pipe_project_cat where txtpamref = :p26_pamref);
    end if;
    end;

    Hi,
    Apex does not work well with temporary tables as you cannot guarantee which session from the pool will be used to serve each page.
    In your case, it looks like the second page is using temporary data from the wrong session.
    Have you considered using Apex Collections instead?
    Luis

  • Problem with rendered tables in JHeadstart 10.1.3.3.87

    Hi,
    We have recently upgraded from Jhs 10.1.3.3.52 to 10.1.3.3.87 (using JDev 10.1.3.4.0.4270) and have run into a problem with a window using regions. We have horizontal region containers, vertical region containers, stacked region containers and detail group regions. The tables in these containers/regions are not rendering at all. When I compared the .jspx pages of both versions of Jhs I noticed the 10.1.3.3.52 version had the following code (which works) as
    <af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRowIndexInRange!=-1* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
    and the 10.1.3.3.87 version had the following code as
    <af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRow!=null* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
    the problem seems to be in the following line in the horizontalRegionContainer.vm and stackedRegionContainer.vm -
    #JHS_PROP("rendered" $subRegion.rendered)
    as in line 33 of the horizontalRegionContainer.vm - <af:panelGroup #REGION_PARTIAL_TRIGGERS($subRegion) *#JHS_PROP("rendered" $subRegion.rendered)* id="#REGION_ID()${subRegion.name}PanelGroup" and
    as in line 32 of the stackedRegionContainer.vm - <af:showDetailItem text="#REGION_TITLE($subRegion)" *#JHS_PROP("rendered" $subRegion.rendered)* #JHS_PROP("disabled" $subRegion.disabled) #REGION_PARTIAL_TRIGGERS($subRegion) id="#REGION_ID()${subRegion.name}Tab">
    has anyone run into a similar problem?
    thanks,
    Lana

    Thanks Steven!
    We appreciate the reply and this solution. Could you, or anyone, point us in the direction of helpful documentation with respect to Velocity Templates. We don't really have as good an understanding as we would like, and most of our customizations are our best guess.
    Thanks very much.
    MaryB
    U of Windsor

  • Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

    Hello
    I have got problems with this installation. I am starting Oracle user
    At the end of the installation I get a mesage when all Configuration Assistants are failed
    I have got 2 computers with Windows 2000 PRO, two networks (private and public)
    As a shared disk I use one external disk (with USB) attached to one computer.
    What to do here?
    please for a reply
    Martin
    PROT-1: Failed to initialize ocrconfig
    SCLS error 1 reading current privileges.
    Internal Error Information:
    Category: 1234
    Operation: scls_iddb_has_privgrp_by_name
    Location: NetLocalGrou
    Other: get local group failed
    Dep: 0
    Step 1: checking status of CRS cluster
    Step 2: configuring OCR repository
    ignoring upgrade failure of ocr(-1)
    failed to configure Oracle Cluster Registry with CLSCFG, ret 102
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
    Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
    Tool type is: Optional.
    The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
    Start output from spawned process:
    End output from spawned process.
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
    Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
    Tool type is: Optional.
    The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
    Start output from spawned process:
    PRIF-12: failed to initialize cluster support services
    End output from spawned process.
    Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
    PRIF-12: failed to initialize cluster support services
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
    Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
    User Selected: Yes/OK
    Starting to execute configuration assistants
    Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
    Tool type is: Optional.
    The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

    Also you clusterware installation installs to an ORACLE_HOME.
    Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
    Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
    Sebastian

  • Problem with a Table Control Scroll Down.

    Hi,
    I´m working with a table control in which I select one of the many lines the table contains and I move it into a structure, I delete the data of the table control internal table and I move the selected line back into the internal table to show only that record. My problem is the following:
    Whenever I have to scroll down to select a line, the selected line doesn´t appear afterwards. I believe that it´s because the scroll bar disappears and keeps on showing the line where the record I selected used to be and because the selected record is added in the fist line of the TC.
    Is there any way of avoiding the disappearrance of the vertical scroll bar? Or how can I show the record added in the first line if the TC only displays the position where the selected record used to be?
    This is the logic I use to show the single record.
      READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
      IF SY-SUBRC = 0.
        MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
        CLEAR TI_ASIGLOT.
        REFRESH TI_ASIGLOT.
        MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
        ST_ASIG-CPEND = ST_ASIG-GAMNG.
        MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
        APPEND TI_ASIGLOT.
    Thank´s and regards.
    Lucila

    Well, I´m going to anwser my own question. The problem was that in my TC the top field value was the line number of the record I've selected. So the only thing I had to do to fix it was to asign 1 to the field TC-top_line inside the form where I select the record.
      READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
      IF SY-SUBRC = 0.
        MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
        CLEAR TI_ASIGLOT.
        REFRESH TI_ASIGLOT.
        MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
        ST_ASIG-CPEND = ST_ASIG-GAMNG.
        MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
        APPEND TI_ASIGLOT.
        W_INI = 1.
      ELSE.
        MESSAGE I889(100) WITH TEXT-T07.
        EXIT.
      ENDIF.
    z_result-top_line = 1.
    (z_result is my TC )
    Best regards,
    Lucila

Maybe you are looking for