Problem with components work install

Hi,
I try to install compoennts works 5.5 and I get a message which indicates that I should use Visual Service Pack 3 or later. I have installeedcService pack 6 and I have still the same message.
Any help ?
Thanks
ArnO

It's not clear what you're trying to install. There is not a version 5.5 release for ComponentWorks. ComponentWorks went from version 3 to version 6 in Measurement Studio 6. ComponentWorks++, or Measurement Studio for Visual C++, went from version 1 to version 6 in Measurement Studio 6. LabWindows/CVI had a version 5.5, and that may be what you're trying to install. Also, there is not a service pack 6 for Visual Studio. There's a service pack 6 for Visual Source Safe and for Windows NT 4.0, but the highest service pack for Visual Studio 6.0 is 5.
If you're trying to install LabWindows/CVI 5.5, please post this question to the LabWindows/CVI forum. If you're trying to install Measurement Studio for Visual Basic for Visual C++, please reply with more information about what you're trying to install and what you have installed. Thanks.
- Elton

Similar Messages

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I am having a problem with Windows Fusion installed on a MacBook.

    I am having a problem with Windows Fusion installed on a MacBook OS 10.  When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
    I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
    I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
    Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
    Any help would be greatly appreciated.
    Thank you very much.

    HartEJ wrote:
    ...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
    If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

  • My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem.

    My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem

    The Ask Toolbar is causing that in the Firefox 3.6.13 version. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.

  • I have an Imac  operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. Is there a place I can download Apple Works 6 onto my computer?

    I have an Imac  operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. It shuts down before I am finished. Is there a place I can download Apple Works 6 onto my computer free?

    AppleWorks has never been available for legal download.
    Have you done the usual trouble shooting steps:
    Quit AppleWorks
    Delete most or all of the Recent Items list.
    Remove the Preferences files to the Desktop or to the Trash.
    Launch AppleWorks to see if the problems remain.
    You'll find Recent Items in:
    username > Documents > AppleWorks User Documents > Starting Points > Recent Items
    There are several preferences files.
    Go to:
    username > Library > Preferences
    Locate, select and delete the file com.apple.appleworks.plist
    Still in the Preferences floder, locate and open the folder AppleWorks.
    Select and delete the two Cache files and the Preferences file.
    Button Bars is also a preferences file, but may be left where it is IF you have no problems that appear related to the Button Bar, and wish to preserve any changes you've made to the Button Bar.
    Regards,
    Barry

  • I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

    I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

    There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

  • Problem with downloading and installing apps

    When I start download or install new apps after few second whole operation slow down or stop. I have same problem when I start update old version of aplications. Can you please help.
    I do not have problem with cnnection to internet.

    Try this
    Make sure IOS is updated to latest version
    (How to update your iOS device
    http://support.apple.com/kb/HT4623)
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • Problem with discdrive and installing snow leopard

    Frustration and desperation has settled in! Lets see if i can get some good help from fellow Apple users!
    Ok this is the problem:
    A few days ago my computer started to crash almost all programs on my MacBook. I would try to get get into Safari for example and it would SLOWLY start up and then after a few seconds into the prgram it give me the error message "This application Safari quit unexpectedly. Mac OS X and other applications are NOT affected. Click to reopen..." Well again it does that with almost all my programs!
    So i took it to the Genius Bar in Munich Germany! (im currently here for business) There the representative of apple actually took my MacBook to the back, checked it for any HD damage and looked at it "under the hub", however couldnt find anything wrong with it physically. So he suggested to backup my HD just reinstall Mac OS X again. I asked him for the new Snow Leopard since i didnt have my startup CD there!
    Well im at home now and trying to install the System. However everytime i put the CD in it TRIES to start it up (up to 3 times) and then ejects it. Sometimes even it DOES load it up but then it would tell me to install the new system i would have to restart the computer and when i do that the same problem (3 upstart attempts then ejection) happens!!
    Now can anyone tell me why this is happening?! On a side note i also tried insert another DVD and CD and BOTH work just fine! I had a similar problem with a previous DVD b4 but the problem was irratic.. meaning sometimes it worked sometimes it doesnt! Any suggestions or do i need a new Discdrive?!

    If your MacBook is under warranty have them check the DVD drive. They replaced my DVD drive because it was doing the same thing. Try the following and see if it helps.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Resetting your Mac's PRAM and NVRAM

  • Problem with the pre-installed WEATHER application

    Hi,
    I was quite pleased with the Weather app that came installed with my iPod Touch. I tapped in my location, deleted the default one, and all was well. However, after working for a short while just fine it's not stuck constantly on a sunny 28 degrees. If I tap the icon the actual weather report is correct (a miserable gloomy 2 degrees, lol). It's just irritating me that it's stuck on the main screen. Any ideas?
    I have updated to latest firmware and still no good. Can I delete the app at all? Can you delete pre-installed applications? I would try deleting and using a 3rd party app or something if I had to. I'm something of a tidyness freak and it annoys me having so many icons I will never use, haha. I would also like to delete the STOCKS app.
    So in summary - Does anyone know what the problem with my weather app is? And can I delete pre-installed apps?
    Thanks!!

    Safari, YouTube, the iTunes WiFi Store, the App Store and the Camera can be removed from the home screen by enabling Restrictions (Settings->General->Restrictions). Manual, Page 95
    The other original applications cannot be removed, only moved to another page.
    The weather app icon is static 73°F for United States region format or 23°C for United Kingdom region format. Did you switch your region format?

  • I need to Uninstall Apple Software Update. I am getting error. "There is a problem with this Windows Installed package.

    My itunes stopped working. I uninstalled/reinstalled. But it would not complete reinstall. Started with Quicktime not loading. I have tried to install Quicktime individually. Still nothing. I now am trying to uninstall ALL itunes/Apple to attempt reinstall. But the Apple Software Update will not remove. I get the error :THERE IS A PROBLEM WITH THIS WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN. CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR.

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Problem with boot / new install system ond SSD

    Hi guys,
    I have fresh installed system on my new SSD. I use my old HDD as external usb drive.
    I have problem with boot when I dont have connected HDD to usb.
    My system boot only to console no to KDE. When I connect external HDD to usb and reboot system, system boot normally.
    Logs after boot.
    Feb 26 16:46:39 arch systemd[1]: Reached target Login Prompts.
    Feb 26 16:46:39 arch systemd[1]: Starting K Display Manager...
    Feb 26 16:46:39 arch systemd[1]: Started K Display Manager.
    Feb 26 16:46:39 arch systemd-logind[231]: New seat seat0.
    Feb 26 16:46:39 arch systemd[1]: Started Login Service.
    Feb 26 16:46:40 arch kernel: microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
    Feb 26 16:46:40 arch kernel: platform microcode: Direct firmware load failed with error -2
    Feb 26 16:46:40 arch kernel: platform microcode: Falling back to user helper
    Feb 26 16:46:40 arch kernel: random: nonblocking pool is initialized
    Feb 26 16:46:40 arch kernel: uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
    Feb 26 16:46:40 arch laptop-mode[271]: enabled, not active
    Feb 26 16:46:40 arch kernel: input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input16
    Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver uvcvideo
    Feb 26 16:46:40 arch kernel: USB Video Class driver (1.1.1)
    Feb 26 16:46:40 arch systemd[1]: Started Wicd a wireless and wired network manager for Linux.
    Feb 26 16:46:40 arch systemd[1]: Starting Network.
    Feb 26 16:46:40 arch systemd[1]: Reached target Network.
    Feb 26 16:46:40 arch systemd[1]: Starting OpenSSH Daemon...
    Feb 26 16:46:40 arch systemd[1]: Started OpenSSH Daemon.
    Feb 26 16:46:40 arch systemd[1]: Starting NoMachine Server daemon...
    Feb 26 16:46:40 arch sshd[373]: Server listening on 0.0.0.0 port 22.
    Feb 26 16:46:40 arch sshd[373]: Server listening on :: port 22.
    Feb 26 16:46:40 arch mtp-probe[404]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2"
    Feb 26 16:46:40 arch mtp-probe[404]: bus: 7, device: 2 was not an MTP device
    Feb 26 16:46:40 arch kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver usbhid
    Feb 26 16:46:40 arch kernel: usbhid: USB HID core driver
    Feb 26 16:46:40 arch systemd[1]: Starting Sound Card.
    Feb 26 16:46:40 arch systemd[1]: Reached target Sound Card.
    Feb 26 16:46:40 arch systemd-udevd[145]: renamed network interface eth0 to enp3s0
    Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
    Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
    Feb 26 16:46:40 arch kernel: i915 0000:00:02.0: irq 45 for MSI/MSI-X
    Feb 26 16:46:40 arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    Feb 26 16:46:40 arch kernel: [drm] Driver supports precise vblank timestamp query.
    Feb 26 16:46:40 arch kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    Feb 26 16:46:40 arch kernel: iTCO_vendor_support: vendor-support=0
    Feb 26 16:46:40 arch kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    Feb 26 16:46:40 arch kernel: iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
    Feb 26 16:46:40 arch kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Feb 26 16:46:40 arch kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
    Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event2 (Lid Switch)
    Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event1 (Sleep Button)
    Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event3 (Power Button)
    Feb 26 16:46:41 arch kernel: microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
    Feb 26 16:46:41 arch kernel: platform microcode: Direct firmware load failed with error -2
    Feb 26 16:46:41 arch kernel: platform microcode: Falling back to user helper
    Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input17
    Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0001: input,hidraw0: USB HID v1.11 Keyboard [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input0
    Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18
    Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0002: input,hidraw1: USB HID v1.11 Mouse [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input1
    Feb 26 16:46:41 arch kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
    Feb 26 16:46:41 arch kernel: IP: [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
    Feb 26 16:46:41 arch kernel: PGD b650b067 PUD b650a067 PMD 0
    Feb 26 16:46:41 arch kernel: Oops: 0000 [#1] PREEMPT SMP
    Feb 26 16:46:41 arch kernel: Modules linked in: mousedev(+) hid_generic iTCO_wdt iTCO_vendor_support ath9k(+) usbhid ath9k_common hid ath9k_hw ath uvcvideo mac80211 microcode(+) videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media evdev psmouse serio_raw pcspkr cfg80211 lpc_ich i915(+) atl1e snd_hda_codec_via snd_hda_intel drm_kms_helper snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit i2c_core snd_timer asus_laptop snd battery ac soundcore sparse_keymap acpi_cpufreq rfkill video input_polldev thermal intel_agp intel_gtt shpchp processor button ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common i8042 serio
    Feb 26 16:46:41 arch kernel: CPU: 1 PID: 227 Comm: acpid Not tainted 3.13.5-1-ARCH #1
    Feb 26 16:46:41 arch kernel: Hardware name: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 217 12/04/2009
    Feb 26 16:46:41 arch kernel: task: ffff88007ffeda00 ti: ffff8800b6516000 task.ti: ffff8800b6516000
    Feb 26 16:46:41 arch kernel: RIP: 0010:[<ffffffffa06c1317>] [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
    Feb 26 16:46:41 arch kernel: RSP: 0018:ffff8800b6517c10 EFLAGS: 00010202
    Feb 26 16:46:41 arch kernel: RAX: 0000000000000000 RBX: ffff8801390f5800 RCX: ffff8801390f5868
    Feb 26 16:46:41 arch kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
    Feb 26 16:46:41 arch kernel: RBP: ffff8800b6517c28 R08: 0000000000000000 R09: ffff88013b001600
    Feb 26 16:46:41 arch kernel: R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
    Feb 26 16:46:41 arch kernel: R13: ffff8801390f5880 R14: ffff8800b3287558 R15: ffff880138c8f600
    Feb 26 16:46:41 arch kernel: FS: 00007f8de7e14700(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
    Feb 26 16:46:41 arch kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    Feb 26 16:46:41 arch kernel: CR2: 0000000000000000 CR3: 00000000b6507000 CR4: 00000000000407e0
    Feb 26 16:46:41 arch kernel: Stack:
    Feb 26 16:46:41 arch kernel: ffff88013926e400 ffff8801390f5800 ffff8801390f5878 ffff8800b6517c60
    Feb 26 16:46:41 arch kernel: ffffffffa06c20cc ffff8801390f5b48 ffff8800b3287558 ffff880138c8f600
    Feb 26 16:46:41 arch kernel: ffffffffa06c2e80 ffff880138c8f610 ffff8800b6517c98 ffffffff811a834f
    Feb 26 16:46:41 arch kernel: Call Trace:
    Feb 26 16:46:41 arch kernel: [<ffffffffa06c20cc>] mousedev_open+0xcc/0x150 [mousedev]
    Feb 26 16:46:41 arch kernel: [<ffffffff811a834f>] chrdev_open+0x9f/0x1d0
    Feb 26 16:46:41 arch kernel: [<ffffffff811a19e7>] do_dentry_open+0x1b7/0x2c0
    Feb 26 16:46:41 arch kernel: [<ffffffff811aedc1>] ? __inode_permission+0x41/0xb0
    Feb 26 16:46:41 arch kernel: [<ffffffff811a82b0>] ? cdev_put+0x30/0x30
    Feb 26 16:46:41 arch kernel: [<ffffffff811a1e01>] finish_open+0x31/0x40
    Feb 26 16:46:41 arch kernel: [<ffffffff811b1bf2>] do_last+0x572/0xe90
    Feb 26 16:46:41 arch kernel: [<ffffffff811af0b6>] ? link_path_walk+0x236/0x8d0
    Feb 26 16:46:41 arch kernel: [<ffffffff811b25cb>] path_openat+0xbb/0x6b0
    Feb 26 16:46:41 arch kernel: [<ffffffff811b3cda>] do_filp_open+0x3a/0x90
    Feb 26 16:46:41 arch kernel: [<ffffffff811c05c7>] ? __alloc_fd+0xa7/0x130
    Feb 26 16:46:41 arch kernel: [<ffffffff811a2fd4>] do_sys_open+0x124/0x220
    Feb 26 16:46:41 arch kernel: [<ffffffff811a30ee>] SyS_open+0x1e/0x20
    Feb 26 16:46:41 arch kernel: [<ffffffff8152142d>] system_call_fastpath+0x1a/0x1f
    Feb 26 16:46:41 arch kernel: Code: c0 6e e5 e0 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 a2 6e e5 e0 eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
    Feb 26 16:46:41 arch kernel: RIP [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
    Feb 26 16:46:41 arch kernel: RSP <ffff8800b6517c10>
    Feb 26 16:46:41 arch kernel: CR2: 0000000000000000
    Feb 26 16:46:41 arch kernel: ---[ end trace 76aa0cbb67cf77f6 ]---
    Feb 26 16:46:41 arch kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Feb 26 16:46:41 arch systemd[1]: acpid.service: main process exited, code=killed, status=9/KILL
    Feb 26 16:46:41 arch systemd[1]: Unit acpid.service entered failed state.
    Feb 26 16:46:41 arch kernel: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
    Feb 26 16:46:41 arch systemd[1]: Started Laptop Mode Tools.
    Feb 26 16:46:41 arch nxserver[374]: NX> 161 Enabled service: nxserver.
    Feb 26 16:46:42 arch kernel: fbcon: inteldrmfb (fb0) is primary device
    Feb 26 16:46:42 arch kernel: ath: phy0: Enable LNA combining
    Feb 26 16:46:42 arch kernel: ath: EEPROM regdomain: 0x60
    Feb 26 16:46:42 arch kernel: ath: EEPROM indicates we should expect a direct regpair map
    Feb 26 16:46:42 arch kernel: ath: Country alpha2 being used: 00
    Feb 26 16:46:42 arch kernel: ath: Regpair used: 0x60
    Feb 26 16:46:42 arch kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    Feb 26 16:46:42 arch kernel: ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011e80000, irq=17
    Feb 26 16:46:42 arch systemd-udevd[139]: renamed network interface wlan0 to wlp2s0
    Feb 26 16:46:42 arch kernel: Console: switching to colour frame buffer device 170x48
    Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: registered panic notifier
    Feb 26 16:46:42 arch kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    Feb 26 16:46:42 arch kernel: acpi device:38: registered as cooling_device2
    Feb 26 16:46:42 arch kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
    Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxnode.
    Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxd.
    Feb 26 16:46:42 arch systemd[1]: Started NoMachine Server daemon.
    Feb 26 16:46:42 arch systemd[1]: Starting Multi-User System.
    Feb 26 16:46:42 arch systemd[1]: Reached target Multi-User System.
    Feb 26 16:46:42 arch systemd[1]: Starting Graphical Interface.
    Feb 26 16:46:42 arch systemd[1]: Reached target Graphical Interface.
    Feb 26 16:46:42 arch systemd[1]: Startup finished in 1.241s (kernel) + 3.231s (userspace) = 4.473s.
    Feb 26 16:46:46 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    Feb 26 16:46:48 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: dhcpcd[1383]: dhcpcd not running
    Feb 26 16:46:49 arch dhcpcd[1383]: dhcpcd not running
    Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
    Feb 26 16:46:49 arch wicd[226]: dhcpcd[1389]: dhcpcd not running
    Feb 26 16:46:49 arch dhcpcd[1389]: dhcpcd not running
    Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: enp3s0 error: No such file or directory
    Feb 26 16:46:49 arch wicd[226]: dhcpcd[1397]: dhcpcd not running
    Feb 26 16:46:49 arch dhcpcd[1397]: dhcpcd not running
    Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
    Feb 26 16:46:51 arch systemd[1]: Starting Getty on tty2...
    Feb 26 16:46:51 arch systemd[1]: Started Getty on tty2.
    Feb 26 16:46:52 arch kernel: wlp2s0: authenticate with 08:86:3b:7f:86:08
    Feb 26 16:46:52 arch kernel: wlp2s0: send auth to 08:86:3b:7f:86:08 (try 1/3)
    Feb 26 16:46:52 arch kernel: wlp2s0: authenticated
    Feb 26 16:46:52 arch kernel: ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
    Feb 26 16:46:52 arch kernel: wlp2s0: associate with 08:86:3b:7f:86:08 (try 1/3)
    Feb 26 16:46:52 arch kernel: wlp2s0: RX AssocResp from 08:86:3b:7f:86:08 (capab=0x411 status=0 aid=4)
    Feb 26 16:46:52 arch kernel: wlp2s0: associated
    Feb 26 16:46:52 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
    Feb 26 16:46:53 arch dhcpcd[1416]: version 6.2.1 starting
    Feb 26 16:46:54 arch dhcpcd[1416]: DUID 00:01:00:01:1a:96:a5:70:1c:4b:d6:a2:1f:ad
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: IAID d6:a2:1f:ad
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: soliciting an IPv6 router
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: ipv6nd_sendrsprobe: sendmsg: Cannot assign requested address
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: rebinding lease of 192.168.2.3
    Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.096:2): pid=1406 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
    Feb 26 16:46:55 arch login[1406]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Feb 26 16:46:55 arch systemd[1]: Starting user-0.slice.
    Feb 26 16:46:55 arch systemd[1]: Created slice user-0.slice.
    Feb 26 16:46:55 arch systemd[1]: Starting User Manager for 0...
    Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.106:3): pid=1477 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
    Feb 26 16:46:55 arch systemd[1]: Starting Session 1 of user root.
    Feb 26 16:46:55 arch systemd[1]: Started Session 1 of user root.
    Feb 26 16:46:55 arch systemd-logind[231]: New session 1 of user root.
    Feb 26 16:46:55 arch systemd[1477]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
    Feb 26 16:46:55 arch login[1406]: ROOT LOGIN ON tty2
    Feb 26 16:46:55 arch systemd[1477]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
    Feb 26 16:46:55 arch systemd[1477]: Mounted /sys/kernel/config.
    Feb 26 16:46:55 arch systemd[1477]: Stopped target Sound Card.
    Feb 26 16:46:55 arch systemd[1477]: Starting Default.
    Feb 26 16:46:55 arch systemd[1477]: Reached target Default.
    Feb 26 16:46:55 arch systemd[1477]: Startup finished in 7ms.
    Feb 26 16:46:55 arch systemd[1]: Started User Manager for 0.
    Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: leased 192.168.2.3 for 283824000 seconds
    Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding route to 192.168.2.0/24
    Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding default route via 192.168.2.1
    Feb 26 16:46:59 arch dhcpcd[1416]: forked to background, child pid 1522
    Feb 26 16:47:10 arch kdm[238]: X server startup timeout, terminating
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] /devices/pci0000:00/0000:00:02.0 timeout; kill it
    Feb 26 16:47:12 arch systemd-udevd[131]: seq 1255 '/devices/pci0000:00/0000:00:02.0' killed
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] /devices/platform/i8042/serio4/input/input15 timeout; kill it
    Feb 26 16:47:12 arch systemd-udevd[131]: seq 1659 '/devices/platform/i8042/serio4/input/input15' killed
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18 timeout; kill it
    Feb 26 16:47:12 arch systemd-udevd[131]: seq 1679 '/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18' killed
    Feb 26 16:47:12 arch kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] terminated by signal 9 (Killed)
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] terminated by signal 9 (Killed)
    Feb 26 16:47:12 arch systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
    Feb 26 16:47:12 arch systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
    Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input15, error: -4
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] terminated by signal 9 (Killed)
    Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input18, error: -4
    Feb 26 16:47:12 arch kernel: mousedev: PS/2 mouse device common for all mice
    Feb 26 16:47:13 arch kdm[238]: X server for display :0 cannot be started, session disabled
    Feb 26 16:48:56 arch kernel: usb 7-2: USB disconnect, device number 2
    Feb 26 16:48:56 arch laptop-mode[1782]: Laptop mode
    Feb 26 16:48:56 arch laptop-mode[1783]: enabled, not active
    Feb 26 16:48:56 arch laptop-mode[1834]: Laptop mode
    [xx@arch Desktop]$ uname -a
    Linux arch 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    Could you please someone help me with this?
    Thanks

    Sorry to bump this, but I'm having the exact same error tonight on my HTPC, any chance you found out what the problem was ?
    To make matters worse, it's not happening every single time, but maybe every 4 out of 5 boots (same kernel, no changes in between.)
    I thought this was a kernel issue related to this:
    https://lkml.org/lkml/2014/3/10/359
    I've tried adding atkbd and psmouse to my mkinitcpio.conf MODULES section and rebuilt, but no change.
    I changed the NVidia driver from nvidia-304xx to nvidia-full-beta-all ( 334.21 ) from AUR but it had the same error at the same place.
    Here's the part from `dmesg` where it borks:
    [ 3.229195] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
    [ 3.236312] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
    [ 3.237230] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
    [ 3.279150] BUG: unable to handle kernel NULL pointer dereference at (null)
    [ 3.280083] IP: [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
    [ 3.280810] PGD c99ea067 PUD c9f4a067 PMD 0
    [ 3.281266] Oops: 0000 [#1] PREEMPT SMP
    [ 3.281668] Modules linked in: mousedev(+) nvidia(PO+) snd_hda_codec_realtek hid_logitech_dj usbhid hid usb_storage coretemp evdev microcode pcspkr serio_raw snd_hda_intel(+) snd_hda_codec shpchp snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore i2c_nforce2 i2c_core wmi processor button r8169 mii ext4 crc16 mbcache jbd2 sd_mod ata_generic pata_acpi ahci libahci libata ohci_pci ohci_hcd ehci_pci ehci_hcd scsi_mod usbcore usb_common psmouse atkbd libps2 i8042 serio
    [ 3.281820] CPU: 1 PID: 211 Comm: acpid Tainted: P O 3.13.6-1-ARCH #1
    [ 3.281820] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./MCP7A-ION, BIOS 080015 10/10/2009
    [ 3.281820] task: ffff8800ca5c1b00 ti: ffff8800c97f0000 task.ti: ffff8800c97f0000
    [ 3.281820] RIP: 0010:[<ffffffffa1cbc317>] [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
    [ 3.281820] RSP: 0018:ffff8800c97f1c10 EFLAGS: 00010202
    [ 3.281820] RAX: 0000000000000000 RBX: ffff8800c9987000 RCX: ffff8800c9987068
    [ 3.281820] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
    [ 3.281820] RBP: ffff8800c97f1c28 R08: 0000000000000000 R09: ffff8800cf401600
    [ 3.281820] R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
    [ 3.281820] R13: ffff8800c9987080 R14: ffff8800c0260058 R15: ffff8800c9f2a500
    [ 3.281820] FS: 00007f8f12f05700(0000) GS:ffff8800cfa80000(0000) knlGS:0000000000000000
    [ 3.281820] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    [ 3.281820] CR2: 0000000000000000 CR3: 00000000ca93e000 CR4: 00000000000007e0
    [ 3.281820] Stack:
    [ 3.281820] ffff8800c9940000 ffff8800c9987000 ffff8800c9987078 ffff8800c97f1c60
    [ 3.281820] ffffffffa1cbd0cc ffff8800c9987348 ffff8800c0260058 ffff8800c9f2a500
    [ 3.281820] ffffffffa1cbde80 ffff8800c9f2a510 ffff8800c97f1c98 ffffffff811a83ef
    [ 3.392372] Call Trace:
    [ 3.398245] [<ffffffffa1cbd0cc>] mousedev_open+0xcc/0x150 [mousedev]
    [ 3.398245] [<ffffffff811a83ef>] chrdev_open+0x9f/0x1d0
    [ 3.398245] [<ffffffff811a1a87>] do_dentry_open+0x1b7/0x2c0
    [ 3.398245] [<ffffffff811aee61>] ? __inode_permission+0x41/0xb0
    [ 3.398245] [<ffffffff811a8350>] ? cdev_put+0x30/0x30
    [ 3.398245] [<ffffffff811a1ea1>] finish_open+0x31/0x40
    [ 3.398245] [<ffffffff811b1c92>] do_last+0x572/0xe90
    [ 3.398245] [<ffffffff811af156>] ? link_path_walk+0x236/0x8d0
    [ 3.398245] [<ffffffff811b266b>] path_openat+0xbb/0x6b0
    [ 3.508083] random: nonblocking pool is initialized
    [ 3.398245] [<ffffffff811b3d7a>] do_filp_open+0x3a/0x90
    [ 3.398245] [<ffffffff811c0617>] ? __alloc_fd+0xa7/0x130
    [ 3.398245] [<ffffffff811a3074>] do_sys_open+0x124/0x220
    [ 3.398245] [<ffffffff811a318e>] SyS_open+0x1e/0x20
    [ 3.398245] [<ffffffff815216ad>] system_call_fastpath+0x1a/0x1f
    [ 3.556729] Code: 40 c1 85 df 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 22 c1 85 df eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
    [ 3.556729] RIP [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
    [ 3.556729] RSP <ffff8800c97f1c10>
    [ 3.556729] CR2: 0000000000000000
    [ 3.563412] ---[ end trace 590b482a8704c6ac ]---
    [ 3.980300] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
    Here's the output on a good boot:
    [ 3.415791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
    [ 3.422256] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
    [ 3.422644] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
    [ 3.434861] mousedev: PS/2 mouse device common for all mice
    [ 3.853639] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
    Here's my mkinitcpio.conf
    : grep -v ^\# /etc/mkinitcpio.conf
    MODULES="atkbd psmouse"
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
    Last edited by corpdecker (2014-03-19 02:47:30)

  • Problem with all ready installed SAP R/3 4.7

    Hi expert,
    well i need ur help.
    i have installed SAP R/3 4.7 in my laptop for learning purpose it was working perfectly but few days ago there was some problem with my booting files. i have installed Windows server on C drive sap data on D drive and Windows XP on F drive. now due to booting problem by mistake my EDP guy has installed xp on C drive without effecting to partition and he found all sap data safe.
    now what is the solution to again start SAP?? like do i need to again install SAP after formatting the laptop?? or i can start it by only reinstalling the Windows server?? kindly help me out i am in big trouble..
    looking for your help.
    Irfan.
    09228466129
    Edited by: Irfan Shersia on Mar 31, 2008 2:59 PM

    hi guys,
    well i m wondering but i have got solution form one system administrator...!! he has simply copy some file from his PC and past in laptop with the help of one software, hardly it takes two minutes and my Windows server & SAP application works perfectly....!!!!!
    still thanks to help.
    Irfan.

  • Problem with client P6 install

    I installed P6 project client and server on a workstation and server and they work ok. However when i attempted to perform a import i got the error below:
    The problem is that the default port 1433 being used on the client is wrong.
    When i go to help-> About Primavera ->system, i see :
    BRE Database: com.microsoft.sqlserver.jdbc.SQLServerDriver, jdbc:sqlserver://FYITESTSVR:1433;database=PMDB_P6V7; (, 7.0, INTERNAL_PLUGINS)
    But on the server, the TCP/TP properties , "TCP dynamic ports" is set to port 3574
    The strange thing is i did the client install on the server,to test, and the app is using the port 3574.
    Am i missing a step in the client install on a workstation, that requires you set the correct port? Can you port be changed on the client side?
    thanks for the help
    Kes
    com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host FYITESTSVR, port *1433* has failed. Error: "Connection refused: connect. Verify the connection properties, check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, and that no firewall is blocking TCP connections to the port.".
         at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:170)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1049)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:833)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:716)
         at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:841)
         at java.sql.DriverManager.getConnection(Unknown Source)
         at java.sql.DriverManager.getConnection(Unknown Source)
         at com.primavera.infr.db.PrivUserResolver.<init>(PrivUserResolver.java:102)
         at com.primavera.infr.admin.CfgAccessMgr.a(CfgAccessMgr.java:101)
         at com.primavera.infr.admin.CfgAccessMgr.<init>(CfgAccessMgr.java:78)
         at com.primavera.integration.app.importexport.ImportExportAction.do(Unknown Source)
         at com.primavera.integration.app.importexport.ImportExportAction.for(Unknown Source)
         at com.primavera.integration.app.importexport.ImportExportMain.main(Unknown Source)

    Thanks a mil.
    according to note 913032.1 , i ran the following command and fixed the problem with importing.
    INSERT into SETTINGS (namespace, setting_name, setting_value) values ('Administrator_Settings', 'JdbcConnectionURL', 'jdbc:sqlserver://FYITESTSVR:3574;database=PMDB_P6V7;');
    Didn't even realize the claim digger app was not working. That was fixed too.
    thanks

  • Problem with Acrobat Pro - install, etc.

    I have problem with my Acrobat Pro (in Adobe Design Standard CS6 edition) - Regularly once a month throughout the software crashes and will not turn on. Only helps to re-install. Now I additionally happened that when reinstalling does not load serial number. It made me very disgruntled. Can you please help? Acrobat Pro I still need to work and this is me terribly resides. My customer identification number is : 168735979. Thank you.

    Thank you but unfortunately the process does not work. It makes the same thing as before. When I install and enters the serial number, it writes: We are unable to verify the product serial number Creative Suite 6 Design Standard. Please contact Customer Support.
    When I deactivated Photoshop and re-activated by the process, everything went without a problem. The problem is only with Acrobat Pro. Acrofix - after running only flashes a command prompt window, otherwise nothing happens. I do not know what to do ....

  • [Win]: Can't install ExtendScript ToolKit 2 - Problems with an already installed E'Script T'Kit 2?

    Hi
    I have problem to install ExtendScript ToolKit 2. I had installed ExtendScript ToolKit 2 and removed it with the Uninstaller. Now I want to reinstall it but it doesn't work. The setup says there is a conflict with the already installed ExtendScript ToolKit 2, but I have removed it.
    What can I do?
    I have searched in the registry about keys with the ExtendScript ToolKit 2 and removed it, but no success. I have searched in the file system for ExtendScript ToolKit 2 and removed all, no success.
    How can I force the installation?
    Thanks
    Hans

    I have just had exactly the same problem and I ended up telephoning Adobe support - officially free products such as the ExtendScript Toolkit 2 do not get telephone support.
    The person I spoke to at Adobe suggested I run the CS3Clean utility, and that worked for me. See http://www.adobe.com/go/kb402767
    BE SURE TO READ THE INSTRUCTIONS IN FULL FIRST
    In my case I only needed to run level 1 in the utility. Bit of a pain though to have to uninstall everything and re-install.

Maybe you are looking for

  • +, - button and inherited tick box is in disabled mode for account assignme

    In the attribute tab of org structure (PPOMA_BBP), we are not getting +, - button and inherited tick box is in disabled mode for account assignment category (attribute is KNT). We want to enter two values for the account assignment category with inhe

  • Listening to audiobooks on iPhone3GS

    Hello everyone, I will be flying for many hours. I want to download an audiobook onto my iPhone 3GS. how does one listen to it? and, if I decide to have a nap, will it begin where it left off? I tried it on a Shuffle last time when I pressed stop. wh

  • Solaris 7 on SPARC 20

    Ok, so I'm new to Solaris. A friend donated an old SPARC 20 w/ an original Solaris Server 7 CD set and I'm having a hard time installing it. So, to make a long story short I can't boot from the CD. I'm not sure Solaris was even made ot boot off a CD

  • Calculating tax condition amount

    Hi all, I am  confused on how the system calculates tax conditon amount (let' say MWST) in sales order. In my system the tax condition type mwst has a condition record maintained of 4%  thru VK11 and a tax code V0 assoicated with it. The base value f

  • The privacy panel in "options" does not give me the option to say how long to keep cookies

    I have it set to use custom settings for history, always use private browsing mode, and accept cookies from sites, but not to accept third-party cookies. Then underneath that is "keep until. . . " with a dialogue box but that is unavailable to me.