Problem With Conexant HDAudio After Installing x86 Vista SP1

I didn't want to start a new thread, but it seems my problem is very unique.
When first installing Vista x86 my Speakers/Headphones worked great. After Vista SP1 installed, my Speakers/Headphones went silent yet the driver was still there and functioning properly. I uninstalled the driver, and let Windows auto-install another driver. (No Rollback was available) I was able to get sound from my Speakers. Speakers are the only thing that work whether I plug into the headphone jack or not.
While plugged to the headphone jack I test the Headphone device in Playback Devices and get nothing through the headphones.
HP support's drivers only mute my speakers while making my headphone device in playback disappear. Same with updating the driver.
I like to use this as a TV computer and would like sound from the TV via the headphone jack.
I have searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
Hp pavilion dv6748us
Conexant Audio
Hardware IDs:
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CF&REV_1000
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CF
This question was solved.
View Solution.

Glad to here it working
Not sure on your model but on dv2000 models I worked on I was able to replace the headset jack board by removing all screws from lower casing, removing rear button panel then just lift front palm rest & have easy'ish access to jack board 2 screws & ribbon connector.
Hope your jack board lasts a while ...
Like my post? Click Kudos (thumb+) to show appreciation.

Similar Messages

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

If you have problems with Apple Apps after installing Mavericks

I had a problem with Apple Apps after installing Mavericks. They would bounce in the dock but never open. The problem apps I had trouble with were CALENDAR, MAIL, and even APP STORE. I am guessing it has to do with permissions when setting up via iCloud. Here's what I did to make my apps work again after the update:
Restart computer, then immediately hold down OPTION so you can start from the 10.9 RECOVERY DISK.
Run DISK UTILITY, then run REPAIR DISK, then run REPAIR DISK PERMISIONS.
After this, RESTART, then hold COMMAND OPTION P R at the same time until your computer restarts three times.
After it boots up, the apps began working like they should have.

That's where your questions about Lion should be posted.

Problems with R4890 T2DIG driver install in Vista

Hello,
I'm having problems installing drivers for a MSI R4890 T2DIG card. I'm trying this on a fresh install of Vista Ultimate.
Initially, I was installing all the drivers (Express Setup) from the CD and was getting a kernel dump when the HDMI Audio drivers were being installed. A reboot of the computer resulted in a mostly black screen with streaks of color near the center just after the windows logo appears - accompanied by a bad humming noise coming from the case! After finding no way to resolve this problem (can't uninstall in safe-mode), I had to re-install Vista.... After creating a Complete PC Backup image, I tried installing just the ATI driver (which I downloaded from ATI's site). The result was a successful install, but subsequent reboot results in same black screen, streaks of color and bad humming sound.
Any help with this problem would be greatly appreciated.
Rob Page

Read >>Posting Guide<<

Problem with another application after install Adobe Illustrator CC 2014

Hello, I write you because we don't know how to fix this problem.
We've encountered a problem after install that software in our corporative computers, for some reason the default font of Lotus Notes changes after install Adobe Illustrator.
It changes Calibri font by The Times New Roman font. Those problems have been detected in the 100% percent of tests made. (Uninstalling Adobe and/or Lotus, installing the software in many PCs and suffer the same issue).
There is a compatibility problem between those programs ?
Thank you in advance for your help.

d,
I am afraid Illy is reluctant to recognize Calibri as a (proper high quality) font and therefore replaces it whenever she comes across it.
Have you had the same issue with the original CC or even earlier?

Problem with sync-cds after installing Patch 115614-26

Hi,
We are in the process of patching the machines in the cluster from 5.2 p2 to p4 on Solaris 9.
After installing 115614-26 (System Directory Server 5.2 patch 4) the process is to start up slapd and run sync-cds to synchronise the updates. We're seeing authentication failures at this point and can't work out what the problem is.
# /usr/sbin/mpsadmserver sync-cds
Admin Id: cn=directory manager
Admin Password:
Error: Ldap authentication failed (147:Unknown error.).
Do you want to try again ? [y/n]: #
The sync-cds process breaks back to the bash prompt after entering the password rather than asking for another go. If a false cn is given the same error number is given yet we're allowed to have another try.
# /usr/sbin/mpsadmserver sync-cds
Admin Id: cn=false
Admin Password:
Error: Ldap authentication failed (147:Unknown error.).
Do you want to try again ? [y/n]: y
The authentication details are correct as we're able to authenticate with the console on the other machines in the cluster using the same details.
No errors are shown in the slapd logs. Does anyone have any ideas?
Many thanks,
Robin.

use :
export NSS_STRICT_NOFORK=DISABLED
before starting the directory and admin server.

Problem with external HDD after installing updates in Mac os X 10.5 leopard

Hi,
I just went out to the store and bought a copy of the leopard.
I installed it with nothing attached to the computer. Everything went fine.
When I went to update the software I had two packages there that I updates, so I had to restart the computer. when it started again it indicated that it had problems with my Iomega Ultramax 1tb disk. It says that disk repair failed and that I only have limited access to the disk. and since it's ALOT of data on the disk, I don¨t rally got the tools to copy everything to another location and then erase the disk and copy everything back. So does anyone know if there's a solution to this.
I'd be really happy to get a solution on this,
thanks alot.
Rich

When I'm using disk utility and use "verify disk" I get the following message:
"First Aid failed
Disk utility stopped verifying "UltraMax" because the following error was encountered.
Filesystem verify or repair failed."

ILife '09 - problems with spotlight preferences after install

+I also posted this over in the iLife forum, but had to post in the iPhoto topic because Apple doesn't have a general iLife topic. Posting again here because the issue is more directly related to spotlight, I just think iLife '09 install had something to do with it.+
Installed iLife '09 on 3 machines yesterday and all are having issues with spotlight prefs. Here's a general idea:
1) Installed iLife '09
2) Forced reboot after install
3) After reboot, spotlight shortcut (cmd+Space) still working. However getting into spotlight preferences often crashes the preferences pane. If the pref pane loads, spotlight preferences showing odd settings:
http://i379.photobucket.com/albums/oo233/netnothing/Picture1.png
Notice the missing items in the list as well as the missing shortcut keys for spotlight.
4) After a second reboot....spotlight shortcut key no longer assigned. Going into spotlight prefs doesn't save the prefs. HAve to go into Keyboard & Mouse to reset and save the spotlight shortcut keys.
5) Still have the issue of the missing items in the spotlight list.
Looks as if something with installing iLife '09 has messed with spotlight preferences.
Anyone else see this same behavior?
I have tried:
- permissions repair
- verify disk
- trash spotlight prefs
None helped. Again, this EXACT thing happening on all 3 machines, so I think it's related to the iLife '09 install.
-Kevin
Message was edited by: netnothing

I am looking to purchase a new macbook, are you saying, with the software included, I should immediately check for software updates for iLife 09, since it is stated on apple store that it will be included with my mac, in order to make sure spotlight words properly?

Problems with USB devices after installing X

I have installed an X-Fi Elite Pro on an SB8P Shuttle box running XP Home. I also use this PC for TV capture, and use a Hauppage WinTV-PVR-USB2, which is an outboard encoder. Previously, I had an Audigy 2 SZ. I was using this set-up for about 8 months with few problems.
Since adding the X-Fi card, I can no longer install the Hauppage card into any USB slot. I sometimes get a strange error message from Windows saying that I would get better results plugging the device into a USB 2 slot. Apart from that, the drivers do not install.
This message is very puzzling - all the USB slots on the PC are USB 2, and there are no USB errors appearing under hardware properties. I cannot be completely certain that the X-Fi card is causing the problem, but am aware of another issue reported by other X-Fi users in which the PC will not shut down cleanly if a USB disk dri've is connected. I am also experiencing this problem - EAXModule is reported as hanging. This leads me to suspect that there is some sort of USB conflict associated with the card.
I would appreciate some assistance with this, as it is extremely frustrating.

I seem to have fixed the Hauppauge problem by disconnecting the Belkin USB hub that I was also using. Of course, given that I also depend heavily on this device, this might not have totally resolved the issue. Anyway, at least I can conclude that the X-Fi and Win-PVR aren't inherently conflicting.
I hope a fix for the external DVD dri've problem is in the works.Message Edited by rohan_p on 0-2-2006 03:24 PM

Problems with external/usb after installing new hard drive

After having a new hard drive installed (from Mac 10.5.2 to 10.6.8) I have experienced 2 problems so far:
1. I am getting no response (from anything connected from my usb port) ie. mouse. But plugging in the mouse directly into the mac works fine.
2. After a few minutes, the sound from my production speakers (connected: macbook->usb cord->sound card-> production speakers) starts to skip and then no sound at all, however my soundcard is still working as I see the light is on.
Can anyone let me know how this can be fixed? I never had these problems before getting the new hard drive.

try doing a PRAM/NVRAM reset.......
that might sort out your issues.......
good luck.....hope it works for you...

Is anyone having problems with their apps after installing ios7

I installed ios 7 on both my ipad2 and my iphone 4s. Some of my apps are not working correctly afther the download. An example is my Overdrive app that I use to read ebooks. When the app tries to load the book, it throws me back to the desktop. Anyone else having problems?

No ...
Try a reset ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If nothing above helped, restore your iPhone > iTunes: Restoring iOS software

Problem with web BPC after installing BPC 7.0

Hi all!
We have installed BPC 7.0 for Microsoft. Diagnostics in Server Manager showed that everything is OK. But when we open BPC for Web an such error occurs:
Server Error in '/OSoft' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30456: 'Security' is not a member of 'Microsoft'.
Thanks for help.

Hi Denis,
To fix this issue, you will need to install the Microsoft Anti-Cross Site Scripting Library, which provides protection to Web-based applications against Cross-Site Scripting (XSS) attacks.
You can download it at the following URL:
http://www.microsoft.com/downloads/details.aspx?familyid=efb9c819-53ff-4f82-bfafe11625130c25&
displaylang=en
After having installed it, you will need to copy AntiXssLibrary.dll to <BPC_folder>\Websvr\Web\bin on both the BPC Application server and the BPC Web server.
You can find more information about this process in the Installation Guide for SAP Business Planning and Consolidation 7.0, version for the Microsoft platform (p.24-25).
Best regards,
Julien

Problems with Java Engine after installing SP09

We have deployed SP09 in our XI box. I downloaded the whole stack for PI nad also XML file. JSPM did not like the XML stack file so I deployed all components in one go. Using option "deploy individual patches" and marking all for deployment.
All components were deployed succesfully (one had warnings SAP-XIAF).
How did you go about deploying SP09. Maybe I am doing something wrong
Now Java engine is not running properly.
I execute sapstart sommand succesfully and no errors are reported. However in SMICM I do not see Java running properly.
Cannot connect either using URL or going in with Visual Administrator.
When I go to JCMON -> Cluster Administration I get error:
Can't connect to message server
I check all the logs and I can't find anything. I thought that logs should be in ../j2ee/cluster/server0 but no files have been updated in this directory.
Please help to identyfy the problem (last week we had the same issue with SP09 on Portal and we chose to restore). SAP has not bee very helpful so far.
Regards,
Mariusz

Hi,
The following threads might help you
"com.sap.aii.af.security.archiving.mdb" not getting deployed
doubts on XI 3.0
Regards
Agasthuri Doss

Problems with my library after installing itunes 7

I have just installed itunes 7 and when i set it up i have obviously clicked on something wrong as it has rearranged my entire collection and renamed everything, it has put every file from my computer in my library. Is there any way of taking it back?

Try using the restore function on windows xp if you have it turned on that is. Click start then go to all programs then accessories then select system tools then select system restore. If you didn't turn this function off you will be able to go back to a time before your upgrade to itunes 7 and all your music will be back the way it was before the upgrade.
Hope that helps you...
Cheers sugaris...
Windows XP Pro
Windows XP Pro

Problems with Office 2008 after installing OS X Mavericks

I just installed OS X Mavericks on my Macbook Pro. Now I can't adjust the size (view) of all the office (2008) program screens. Can anybody help me to fix this?For example, the view of Word is very small now and I just simply want to adjust the size. This is the only from I have.
Thanks in advance!

You have tried to adjust the size using the \\\\ tab at the bottom right?
You might try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)
Mine works fine, so it isn't Word 2008. You might try re-installing Office.

Problem With Conexant HDAudio After Installing x86 Vista SP1

Similar Messages

Maybe you are looking for